Case IH Tractor PUMA 130, 145, 160 Tier 4, Tractors Agricultural,ENGLISH NAO,_,Fo Operator’s Manual – PDF DOWNLOAD

Description

Case IH Tractor PUMA 130, 145, 160 Tier 4, Tractors Agricultural,ENGLISH NAO,_,Fo Operator’s Manual

FILE DETAILS:

Case IH Tractor PUMA 130, 145, 160 Tier 4, Tractors Agricultural,ENGLISH NAO,_,Fo Operator’s Manual_84350849
Size : 14.1 MB
Format : PDF
Language : English
Number of Pages : 502 pages
Brand: Case IH
Type of machine: Tractor
Type of document: Operator’s Manual
Model: Puma® 130, Puma® 145, Puma® 160
Part No: 84350849

CASE IH TRACTOR PUMA 130, 145, 160 TIER 4, TRACTORS AGRICULTURAL,ENGLISH NAO,_,FO OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case IH Tractor PUMA 130, 145, 160 Tier 4, Tractors Agricultural,ENGLISH NAO,_,Fo Operator’s Manual_84350849

 GENERAL INFORMATION:

• This Manual has been prepared to assist you in the correct procedure for running- in, driving and operating and for the maintenance of your new tractor. Read this Manual carefully. Your tractor is intended for use in normal and customary agricultural applications.
• If at any time you require advice concerning your tractor, do not hesitate to contact your authorised dealer. He has factory trained personnel, genuine manufacturers’ parts and the necessary equipment to carry out all your service requirements.
• The specification are provided for your information and guidance. For further information concerning your tractor and equipment, consult your authorised dealer. All data given in this manual is subject to production variations.
• Dimensions and weight are approximate only. The illustrations do not necessarily show tractors in standard condition or imply that these features are available in all countries. For exact information about any particular tractor, please consult your authorised dealer.
• Your tractor has been designed and built to give maximum performance, economy and ease of operation under a wide variety of operating conditions. Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition.
• To maintain this condition and ensure troublefree operation, it is important that the routine services, as specified on page 7-13 of this Manual, are carried out at the recommended intervals.

OPERATORS MANUAL STORAGE:

• The Operators Manual supplied with your tractor is an important source of information and should be stored safely. The manual is written specifically for your tractor so it is important that you make a note of the print number and issue date which can be found on the cover. In the event the manual is lost or damaged it can be replaced with the correct version.
• A storage pocket for the Operators Manual can be found on the rear of the seat. The manual should be kept in this pocket at all times when not in use.

ABOUT THIS MANUAL:

• This manual gives information for use of your machine, as intended and under the conditions foreseen by the manufacturer during normal operation and routine service and maintenance. Read and understand; keep it in good condition and always safely store it in the provided pocket in the back of your seat for later easy retrieval.
• This manual does not contain all the information related to periodical service, converting and repairs to be carried out by professional service personnel. The Table of Contents page(s) are provided to have an overview of main manual’s topics. A detailed alphabetic index is available at the end of this manual for locating specific items.

Normal operation:

• Normal operation means the use of the tractor for the purpose intended by the manufacturer by an operator familiar with the tractor and the mounted or towed equipment and complying with the information for operation and safe practices, as specified by the manufacturer in this manual and by the decals on the tractor and the equipment.
• Normal operation includes the preparation and storage of the tractor, swinging components into work position and vice versa, adding or removing ballast and picking up and setting off attachments.  Normal operation includes the adjustment and setting of the tractor and equipment, for the specific condition of the field and/ or the crop.

Routine service :

•  Routine service and maintenance means activities that must be done daily by an operator familiar with the tractor characteristics and complying with the information for routine service and safe practices, as specified by the manufacturer in this manual and by decals on the tractor, in order to maintain its proper function. Routine service includes activities such as fueling, cleaning, washing, topping up fluid levels, greasing, replacing of consumable articles such as lamp bulbs. Converting, periodical service and repair
•  Periodical service means activities that must be done at defined intervals by trained personnel familiar with the tractor characteristics and which are complying with the information for periodical service and safe practices, as partly specified by the manufacturer in this manual and in other Company literature, in order to maintain the expected life time of the tractor.
•  Converting means activities that must be done by professional service personnel familiar with the tractor characteristics and complying with the information for converting, as partly pecified by the manufacturer in this manual, in assembly instructions or in other Company literature, in order to fit the tractor to a specific configuration.
• Repair means activities that must be done by professional service personnel only familiar with the tractor characteristics and complying with the information .

CLEANING THE TRACTOR:

• Your tractor is a state- of- the- art machine with sophisticated, electronic controls. This should be taken into consideration when cleaning the tractor, particularly if using a high pressure washer.
• Even though every precaution has been taken to safeguard electronic components and connections, the pressure generated by some of these machines is such that complete protection against water ingress cannot be guaranteed.
• When using a high pressure washer, do not stand too close to the tractor and avoid directing the jet at electronic components, electrical connections, breathers, seals, filler caps, etc. Never direct a cold water jet at a hot engine or exhaust. Failure to comply with these rules will render the warranty null and void.

TABLE OF CONTENTS:

Case IH Tractor PUMA 130, 145, 160 Tier 4, Tractors Agricultural,ENGLISH NAO,_,Fo Operator’s Manual_84350849

1 GENERAL INFORMATION
Metric and imperial units abbreviations 1-1
To the owner1-3
Product identification1-5
Engine identification 1-6
Drive line identification1-7
Cab identification1-8
Ecology and the environment 1-9
Programming tractor functions 1-10
Operator’s manual storage 1-11
Before operating the tractor1-11
International symbols 1-12
Machine stability 1-13
Selective Catalytic Reduction (SCR) system 1-17
2 SAFETY INFORMATION
Safety precautions2-1
Safety decals2-3
Safety rules 2-11
Burn prevention2-18
Prevention of fire or explosions2-19
Fire extinguisher 2-20
Protection offered by the tractor2-21
Hazardous substances 2-24
Emergency exit 2-25
Wheel chocks2-26
Intended use statement2-27
Instructor’s seat2-29
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Introduction3-1
Cab air filters3-5
In cab storage (where fitted)3-6
Cable and wiring routing3-7
Mobile telephone usage 3-7
Implement monitor installation3-8
Cab air pressurisation control (where fitted)3-8
OPERATOR’S SEAT
Air suspension seat deluxe 3-10
Seat belt3-14
INSTRUCTOR’S SEAT
Instructional seat 3-15
FORWARD CONTROLS
Ignition key 3-16
Hazard light switch 3-16
Lights and turn indicator lever3-17
Follow me home lights 3-17
Windshield wiper and washer controls 3-18
Electronic parking brake 3-19
Clutch pedal3-23
Foot brakes 3-23
Exhaust brake (where fitted) 3-24
Steering column3-25
LEFT-HAND SIDE CONTROLS
Hand brake 3-26
RIGHT-HAND SIDE CONTROLS
Integrated control panel3-27
REARWARD CONTROLS
Switches on C-pillar3-28
Hydraulic master switch3-29
Heated screens (where fitted)3-30
Fast steering system (where fitted)3-31
Battery isolator control switch3-33
Climate controls3-34
Manual temperature control3-35
Automatic Temperature Control (ATC) 3-36
OVERHEAD CONTROLS
Switch panel work lights3-38
Interior light 3-39
INSTRUMENT CLUSTER
Integrated control unit3-40
Gauges 3-40
Indicator and warning lights3-41
Displays3-44
Transmission display 3-45
Keypad basic 3-47
Keypad enhanced3-48
Selecting or changing the display settings 3-50
Adjust menu3-51
Configure menu3-53
Performance monitor 3-56
Armrest color display 3-61
Pop-up screens on color display 3-63
Performance monitor on color display 3-69
Programming the displays 3-72
Alarm functions 3-75
Accessing stored fault codes 3-77
Warning and advisory symbols 3-78
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Refueling the tractor 4-1
STARTING THE UNIT
Starting the engine4-3
Grid heater cold start aid (where fitted) 4-4
Fuel heater (where fitted) 4-5
Coolant immersion heater (where fitted)4-5
Transmission oil heater (where fitted) 4-6
Boosting the battery 4-7
STOPPING THE UNIT
Stopping the engine 4-8
Automatic engine shut down4-8
Automatic engine shut down with enhanced keypad (where fitted) 4-9
MOVING THE UNIT
Operating in cold temperatures4-10
Reversible engine fan4-11
5 TRANSPORT OPERATIONS
PREPARING FOR ROAD TRANSPORT
Carrying the tractor on a transporter5-1
Secure the high visibility roof panel 5-1
RECOVERY TRANSPORT
Freeing a stuck tractor5-2
Towing the tractor 5-3
6 WORKING OPERATIONS
GENERAL INFORMATION
Variable engine power management6-1
Constant engine speed6-3
Differential lock6-6
Four wheel drive6-8
Front axle suspension (where fitted) 6-10
AUTOMATED HEADLAND FUNCTIONS6-11
Quick guide 6-11
Explanation of symbols 6-13
Recording and replaying 6-14
Recording a sequence 6-17
Replaying a sequence 6-19
Headland function and color display screen 6-23
Deleting a sequence with color display6-26
TRANSMISSION
Foot throttle pedal6-27
Hand throttle 6-27
Shuttle lever6-28
Transmission display 6-30
Fault codes 6-32
SEMI POWERSHIFT TRANSMISSION6-33
Transmission operation6-33
Powershift control lever6-34
Driving the tractor6-35
Speed matching6-37
Auto shift function6-38
Auto shifting field mode6-39
Auto shifting in road mode 6-42
Setting the forward and reverse gear ratios6-45
Setting the sharp shuttle function6-46
Creeper gears (where fitted) 6-47
FULL POWERSHIFT TRANSMISSION6-48
Transmission operation6-48
Powershift control lever6-49
Driving the tractor6-50
Speed matching6-52
Auto shift function6-53
Auto shifting field mode6-54
Auto shifting in road mode 6-57
Auto shifting and ‘go to’ modes 6-60
Setting the forward and reverse gear ratios6-62
Creeper gears (where fitted) 6-63
REAR POWER TAKE-OFF
Power Take-Off (PTO) operating precautions6-64
Changing the PTO output shaft6-64
Attaching PTO driven equipment 6-65
Power Take-Off (PTO) operation 6-66
Two speed PTO systems 6-71
Three speed PTO systems 6-73
Ground drive PTO (where fitted) 6-75
External PTO controls6-76
Auto PTO operation6-78
FRONT POWER TAKE OFF
Power Take-Off (PTO) operation 6-81
Auto PTO operation6-83
REAR HITCH
Electronic Draft Control (EDC) 6-85
Settings and display6-89
Electronic Draft Control (EDC) operation6-91
External hitch controls6-97
FRONT HITCH
Settings and adjustments6-99
Hitch operation6-102
Auxiliary front couplers (where fitted) 6-107
External hitch controls 6-109
HYDRAULIC REMOTE CONTROL VALVES
Remote control valves6-110
Operating with remote valves 6-113
Connecting remote cylinders6-116
Hydraulic oil level when using remote hydraulic equipment6-118
ELECTRO-HYDRAULIC REMOTE CONTROL VALVES (where fitted)
Remote control valves6-120
Settings and adjustments 6-127
Setting the remote valve priority6-133
Creating timer programs6-135
Connecting remote cylinders6-142
Operating with remote valves 6-144
Joystick operation with a front loader 6-146
Mid mount remote valves 6-152
External EHR controls 6-154
Hydraulic oil level when using remote hydraulic equipment6-155
HYDRAULIC POWER BEYOND PORT
Hydraulic power beyond for external services with mechnical-hydraulic remote control
valves 6-157
Hydraulic power beyond for external services with electro-hydraulic remote control
valves 6-159
THREE POINT HITCH
Attaching three-point hitch equipment6-162
Lift rod adjustment6-164
Top link adjustment6-166
Flexible link end adjustment 6-168
Quick hitch6-169
Linkage stabilizer adjustment 6-171
DRAWBARS AND TOWING ATTACHMENTS
Drawbars and towing attachments6-174
Swinging drawbar 6-177
TRAILER BRAKING SYSTEMS
Air-operated trailer brakes6-180
Trailer brake bias control6-183
Auxiliary air supply connector (where fitted)6-183
Hydraulic trailer brakes6-184
WHEEL TRACK ADJUSTMENT
Front wheel track adjustment 6-185
Front wheel alignment 6-189
Steering stops 6-190
Front axle oscillation stops6-190
Front fender 6-191
REAR WHEEL TRACK ADJUSTMENT 6-193
Flange type axle (where fitted)6-193
Bar type axle (where fitted)6-196
Dual rear wheels (where fitted)6-202
BALLASTING AND TIRES
Ballasting and tires6-205
Iron weights (where fitted) 6-208
Liquid ballast6-211
Tire inflation 6-213
Tire pressures and permissible loads 6-214
AUXILIARY POWER CONNECTIONS
Diagnostic socket 6-216
Trailer socket electrical6-216
ELECTRICAL POWER CONNECTORS6-217
Internal power connectors 6-217
External power connectors6-219
7 MAINTENANCE
GENERAL INFORMATION
Introduction7-1
Fuel requirement7-2
Biodiesel fuel – Biodiesel fuels7-4
Change the engine oil 7-6
Protective devices 7-7
Lubricants and coolants 7-9
Tractor jacking points 7-11
General specifications7-12
Capacities7-13
Organic Acid Technology (OAT) coolant 7-14
MAINTENANCE CHART
Maintenance chart 7-15
WHEN THE WARNING LIGHT IS ON
Change the engine air cleaner outer element7-17
Drain the fuel system water separator 7-18
Check the brake fluid level 7-19
EVERY 10 HOURS OR EACH DAY
Check the engine coolant level 7-20
Check the engine oil level7-21
Check the remote control valve drain bottles7-21
Check windscreen washer reservoir 7-22
Drain air reservoir on air operated trailer brake7-22
FIRST 50 HOURS
Service operations 7-23
EVERY 50 HOURS
Clean the cab air filter7-24
Clean the SCR cover air ducts 7-25
Clean the cooler section 7-26
All grease fittings 7-27
Check the front and the rear wheel nuts 7-34
Check the tire pressures and the tire condition7-34
EVERY 100 HOURS
Inspect the poly V-belt 7-35
Inspect the compressor drive belt7-35
EVERY 300 HOURS
Check the battery fluid level7-36
Adjust the hand brake7-37
Check the transmission oil level, the rear axle oil level and the hydraulic oil level 7-38
Check the 4WD front axle differential oil level and the hubs oil level7-39
Check the front PTO gearbox oil level 7-39
EVERY 600 HOURS
Change engine oil and filter7-40
Change the first stage fuel filter and the fuel filter element7-42
Change the engine air cleaner outer element7-43
Change the charge pump oil filter7-44
Check the engine air intake connections 7-45
Check the transmission oil cooler pipe couplings7-46
Clean the DEF/AdBlue in-line filter 7-46
EVERY 1200 HOURS OR ANNUALLY
Change the cab air filters 7-47
Change the main oil filter cartridge 7-48
Change the 4WD differential oil7-49
Change the 4WD planetary hub oil 7-50
Change the front PTO gearbox oil 7-50
Grease the rear axle shaft bearing 7-51
EVERY 1200 HOURS OR EVERY 2 YEARS
Change the DEF/AdBlue in-line filter 7-52
Change the engine air cleaner inner element7-53
Check the valve tappet clearance7-54
Change the air brake drier reservoir 7-55
Change the poly V-belts7-56
Change the transmission oil, the rear axle oil and the hydraulic oil7-58
EVERY 1800 HOURS OR EVERY 2 YEARS
Change the engine breather filter7-59
EVERY 3600 HOURS OR EVERY 2 YEARS
Change the DEF/AdBlue main filter7-60
EVERY 3600 HOURS OR EVERY 4 YEARS
Change the engine coolant fluid – OAT type coolant 7-61
EVERY 36 MONTHS
Check the air-conditioning system 7-65
GENERAL MAINTENANCE
Cleaning the tractor7-66
Check first stage fuel filter and water trap7-68
Bleeding the fuel system 7-68
Hydraulic system hoses7-69
Check the brake pedal latching/unlatching 7-69
Adjust the cab suspension (where fitted) 7-70
Headlight and work light adjustment 7-71
Bulb replacement 7-72
Fuses and relays 7-76
Protecting the electronic and electrical systems during battery charging or welding7-81
Battery removal and installation7-82
STORAGE
Tractor storage 7-83
Preparation for use after storage 7-83
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Introduction8-1
ALARM(S)
Fault codes and symbols8-2
SYMPTOM(S)
Engine 8-4
Transmission8-5
Hydraulics 8-5
Three-point hitch8-6
Brakes 8-6
Cab8-6
Electrical system8-7
9 SPECIFICATIONS
General dimensions 9-1
Maximum operating angle 9-4
Maximum permissible operating weights9-5
Tractor weights9-5
Capacities 9-6
Engine 9-7
Fuel system 9-7
Air cleaner system9-8
Cooling system9-8
Transmission9-8
Rear Power Take-Off (PTO) 9-9
Front Power Take-Off (PTO)9-9
Hydraulic system 9-10
Three-point hitch 9-10
Remote control valves 9-12
Three-point hitch front9-12
Front remote control valve couplers9-12
Brakes9-13
Steering9-13
Electrical equipment9-14
Ground speed chart Semi-Powershift transmission9-15
Ground speed chart Full-Powershift transmission 9-18
Minimum hardware tightening torques 9-21
10 ACCESSORIES
External rear view mirrors10-1
Auxiliary headlights 10-1
11 FORMS AND DECLARATIONS
Service record 1st 50 hour, Owner copy 11-1
Service record 1st 50 hour, Dealer copy 11-3

INDEX DETAILS:

Case IH Tractor PUMA 130, 145, 160 Tier 4, Tractors Agricultural,ENGLISH NAO,_,Fo Operator’s Manual_84350849

ACCESS TO OPERATOR’S PLATFORM 3-1
CAB AIR FILTERS 3-5
CAB AIR PRESSURISATION MONITOR (where fitted) 3-8
CABLE AND WIRING ROUTING3-7
IMPLEMENT MONITOR INSTALLATION 3-8
IN CAB STORAGE (where fitted)3-6
INTRODUCTION 3-1
MOBILE TELEPHONE USAGE 3-7
ACCESSORIES 10-1
AUXILIARY HEADLIGHTS 10-1
EXTERNAL REAR VIEW MIRRORS 10-1
ALARM(S)8-2
FAULT CODES AND SYMBOLS 8-2
AUXILIARY POWER CONNECTIONS 6-204
DIAGNOSTIC SOCKET6-204
ELECTRICAL POWER CONNECTORS 6-205
EXTERNAL POWER CONNECTORS6-207
INTERNAL POWER CONNECTORS 6-205
TRAILER SOCKET ELECTRICAL6-204
BALLASTING AND TYRES 6-193
BALLASTING AND TYRES6-193
IRON WEIGHTS (where fitted)6-196
LIQUID BALLAST 6-199
TYRE INFLATION 6-201
TYRE PRESSURES AND PERMISSIBLE LOADS 6-202
COMMISSIONING THE UNIT4-1
TRACTOR REFUELLING 4-1
CONTROLS/INSTRUMENTS 3-1
ACCESSING STORED ERROR CODES 3-79
ADJUST MENU 3-53
AIR SUSPENSION SEAT DELUXE3-10
ALARM FUNCTIONS3-77
ARMREST COLOUR DISPLAY 3-63
AUTOMATIC TEMPERATURE CONTROL (ATC)3-38
BATTERY ISOLATOR SWITCH3-34
CAB AIR FILTERS 3-5
CAB AIR PRESSURISATION MONITOR (where fitted) 3-8
CABLE AND WIRING ROUTING3-7
CLIMATE CONTROLS 3-35
CLUTCH/ INCHING PEDAL3-24
CONFIGURE MENU 3-55
DISPLAYS 3-46
ELECTRONIC PARK BRAKE 3-20
EXHAUST BRAKE (where fitted) 3-25
FAST STEERING SYSTEM (where fitted)3-32
FOLLOW ME HOME LIGHTS 3-18
FOOT BRAKES 3-24
GAUGES 3-42
HANDBRAKE 3-27
HAZARD WARNING LIGHT SWITCH 3-17
HEATED SCREENS (where fitted) 3-31
HYDRAULIC MASTER SWITCH 3-30
IMPLEMENT MONITOR INSTALLATION 3-8
IN CAB STORAGE (where fitted)3-6
INDICATOR AND WARNING LIGHTS 3-43
INSTRUCTIONAL SEAT (where fitted)3-16
INTEGRATED CONTROL PANEL 3-28
INTEGRATED CONTROL UNIT3-42
INTERIOR LIGHT3-41
INTRODUCTION 3-1
KEY- START SWITCH 3-17
KEYPAD BASIC 3-49
KEYPAD ENHANCED3-50
LIGHT-/ TURN LEVER 3-18
MANUAL TEMPERATURE CONTROL3-37
MOBILE TELEPHONE USAGE 3-7
PERFORMANCE MONITOR3-59
PERFORMANCE MONITOR ON COLOUR DISPLAY 3-71
POP- UP SCREENS ON COLOUR DISPLAY3-65
PROGRAMMING THE DISPLAYS 3-74
RADIO/CASSETTE/CD PLAYER (where fitted) 3-40
SEAT BELT3-15
SELECTING OR CHANGING THE DISPLAY SETTINGS 3-52
STEERING COLUMN3-26
SWITCH PANEL C- PILLAR3-29
SWITCH PANEL WORKLIGHTS 3-40
TRANSMISSION DISPLAY 3-46
WARNING AND ADVISORY SYMBOLS 3-80
WINDSHIELD WIPER AND WASHER CONTROLS 3-19
DRAWBARS AND TOWING ATTACHMENTS6-164
DRAWBARS AND TOWING ATTACHMENTS 6-164
SWINGING DRAWBARS 6-167
ELECTRO-HYDRAULIC REMOTE CONTROL VALVES (where fitted) 6-116
CONNECTING REMOTE CYLINDERS 6-138
CREATING TIMER PROGRAMMES 6-131
EXTERNAL EHR CONTROLS6-147
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-148
JOYSTICK OPERATION WITH A FRONT LOADER6-142
MID MOUNT REMOTE VALVES 6-145
OPERATING WITH REMOTE VALVES 6-140
REMOTE CONTROL VALVES6-116
SETTING THE REMOTE VALVE PRIORITY6-129
SETTINGS AND ADJUSTMENTS6-123
EVERY 10 HOURS OR EACH DAY 7-18
CHECK ENGINE COOLANT LEVEL 7-18
CHECK ENGINE OIL LEVEL 7-19
CHECK REMOTE CONTROL VALVE DRAIN BOTTLES7-19
CHECK WINDSCREEN WASHER RESERVOIR7-20
DRAIN AIR RESERVOIR ON AIR OPERATED TRAILER BRAKE 7-20
EVERY 100 HOURS7-32
INSPECT COMPRESSOR DRIVE BELT 7-32
INSPECT POLY V-BELT7-32
EVERY 1200 HOURS OR ANNUALLY 7-44
CHANGE 4WD DIFFERENTIAL OIL 7-47
CHANGE 4WD PLANETARY HUB OIL7-48
CHANGE CAB AIR FILTERS7-44
CHANGE FRONT PTO GEARBOX OIL 7-48
CHANGE MAIN OIL FILTER CARTRIDGE7-45
CHANGE TRANSMISSION/ REAR AXLE AND HYDRAULIC OIL 7-46
EVERY 1200 HOURS OR EVERY 2 YEARS 7-49
CHANGE AIR BRAKE DRIER RESERVOIR 7-57
CHANGE DEF/ AdBlue FILTER7-50
CHANGE ENGINE AIR CLEANER INNER ELEMENT 7-51
CHANGE ENGINE BREATHER FILTER 7-52
CHANGE ENGINE COOLANT FLUID 7-53
CHANGE POLY V-BELTS 7-58
CHECK BATTERY FLUID LEVEL 7-49
CHECK VALVE TAPPET CLEARANCE7-52
EVERY 300 HOURS7-33
ADJUST HANDBRAKE 7-34
CHECK 4WD FRONT AXLE DIFFERENTIAL AND HUBS OIL LEVEL7-36
CHECK BATTERY FLUID LEVEL 7-33
CHECK FRONT PTO GEARBOX OIL LEVEL 7-36
CHECK TRANSMISSION/REAR AXLE AND HYDRAULIC OIL LEVEL 7-35
EVERY 36 MONTHS7-60
CHECK BATTERY FLUID LEVEL 7-61
SERVICE THE AIR CONDITIONER SYSTEM7-60
EVERY 50 HOURS 7-22
ALL GREASE FITTINGS7-25
CHECK FRONT AND REAR WHEEL NUTS 7-31
CHECK TYRE PRESSURES AND TYRE CONDITION 7-31
CLEAN THE CAB AIR FILTER 7-22
CLEAN THE COOLER SECTION 7-24
EVERY 600 HOURS7-37
CHANGE CHARGE PUMP OIL FILTER 7-41
CHANGE DEF/ AdBlue FILTER7-43
CHANGE ENGINE OIL AND FILTER 7-37
CHANGE FUEL PRE-FILTER AND FUEL FILTER ELEMENT 7-39
CHANGE THE ENGINE AIR CLEANER OUTER ELEMENT 7-40
CHECK ENGINE AIR INTAKE CONNECTIONS 7-42
CHECK TRANSMISSION OIL COOLER PIPE COUPLINGS 7-43
FAULT CODE RESOLUTION 8-1
INTRODUCTION 8-1
FIRST 50 HOURS7-21
SERVICE OPERATIONS7-21
FORMS AND DECLARATIONS 11-1
Service record 1st 50 hour, Dealer copy 11-3
Service record 1st 50 hour, Owner copy 11-1
FORWARD CONTROLS 3-17
CLUTCH/ INCHING PEDAL3-24
ELECTRONIC PARK BRAKE 3-20
EXHAUST BRAKE (where fitted) 3-25
FOLLOW ME HOME LIGHTS 3-18
FOOT BRAKES 3-24
HAZARD WARNING LIGHT SWITCH 3-17
KEY- START SWITCH 3-17
LIGHT-/ TURN LEVER 3-18
STEERING COLUMN3-26
WINDSHIELD WIPER AND WASHER CONTROLS 3-19
FRONT HITCH6-95
AUXILIARY FRONT COUPLERS (where fitted) 6-103
EXTERNAL HITCH CONTROLS 6-105
HITCH OPERATION 6-98
SETTINGS AND ADJUSTMENTS 6-95
FRONT POWER TAKE OFF 6-79
PTO OPERATION 6-79
GENERAL INFORMATION1-1
BEFORE OPERATING THE TRACTOR 1-11
CAB IDENTIFICATION1-8
DRIVELINE IDENTIFICATION 1-7
ECOLOGY AND THE ENVIRONMENT 1-9
ENGINE IDENTIFICATION 1-6
INSTRUCTOR’S SEAT 1-17
INTERNATIONAL SYMBOLS 1-12
MACHINE STABILITY1-13
METRIC AND IMPERIAL UNITS ABBREVIATIONS 1-1
PRODUCT IDENTIFICATION1-5
PRODUCT IDENTIFICATION PLATE 1-8
PROGRAMMING TRACTOR FUNCTIONS 1-10
SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM1-18
TO THE OWNER 1-3
GENERAL INFORMATION6-1
AUTOMATED HEADLAND FUNCTIONS 6-11
CONSTANT ENGINE SPEED6-3
DELETING A SEQUENCE 6-26
DIFFERENTIAL LOCK6-6
EXPLANATION OF SYMBOLS 6-16
FOUR WHEEL DRIVE6-8
FRONT AXLE SUSPENSION (where fitted) 6-10
QUICK GUIDE6-11
RE-PLAYING A SEQUENCE6-22
RECORDING A SEQUENCE 6-17
RECORDING AND RE-PLAYING 6-13
VARIABLE ENGINE POWER MANAGEMENT6-1
GENERAL INFORMATION7-1
BIODIESEL FUEL 7-4
CAPACITIES 7-12
ENGINE OIL CHANGE7-6
FUEL REQUIREMENT7-2
General specification 7-11
INTRODUCTION 7-1
LUBRICANTS AND COOLANTS Lubrications and Coolants7-9
PROTECTIVE DEVICES 7-7
GENERAL MAINTENANCE 7-63
ADJUST CAB SUSPENSION (where fitted) 7-67
BATTERY REMOVAL AND INSTALLATION 7-85
BLEEDING THE FUEL INJECTION SYSTEM7-65
BULB REPLACEMENT 7-75
CHECK BRAKE PEDAL LATCHING/UNLATCHING 7-66
CLEANING THE TRACTOR7-63
FUEL SYSTEM PRE- FILTER AND WATER TRAP 7-65
FUSES AND RELAYS7-79
HEADLIGHT AND WORKLAMP ADJUSTMENT 7-74
PROTECTING THE ELECTRONIC AND ELECTRICAL SYSTEMS DURING BATTERY CHARGING OR
WELDING 7-84
TRANSMISSION CLUTCH CALIBRATION7-68
HYDRAULIC POWER BEYOND PORT 6-150
HYDRAULIC POWER BEYOND FOR EXTERNAL SERVICES 6-150
HYDRAULIC REMOTE CONTROL VALVES 6-106
CONNECTING REMOTE CYLINDERS 6-112
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-114
OPERATING WITH REMOTE VALVES 6-108
REMOTE CONTROL VALVES6-106
INSTRUCTOR’S SEAT 3-16
INSTRUCTIONAL SEAT (where fitted)3-16
INSTRUMENT CLUSTER 3-42
ACCESSING STORED ERROR CODES 3-79
ADJUST MENU 3-53
ALARM FUNCTIONS3-77
ARMREST COLOUR DISPLAY 3-63
CONFIGURE MENU 3-55
DISPLAYS 3-46
GAUGES 3-42
INDICATOR AND WARNING LIGHTS 3-43
INTEGRATED CONTROL UNIT3-42
KEYPAD BASIC 3-49
KEYPAD ENHANCED3-50
PERFORMANCE MONITOR3-59
PERFORMANCE MONITOR ON COLOUR DISPLAY 3-71
POP- UP SCREENS ON COLOUR DISPLAY3-65
PROGRAMMING THE DISPLAYS 3-74
SELECTING OR CHANGING THE DISPLAY SETTINGS 3-52
TRANSMISSION DISPLAY 3-46
WARNING AND ADVISORY SYMBOLS 3-80
LEFT-HAND SIDE CONTROLS3-27
HANDBRAKE 3-27
MAINTENANCE7-1
ADJUST CAB SUSPENSION (where fitted) 7-67
ADJUST HANDBRAKE 7-34
ALL GREASE FITTINGS7-25
BATTERY REMOVAL AND INSTALLATION 7-85
BIODIESEL FUEL 7-4
BLEEDING THE FUEL INJECTION SYSTEM7-65
BULB REPLACEMENT 7-75
CAPACITIES 7-12
CHANGE 4WD DIFFERENTIAL OIL 7-47
CHANGE 4WD PLANETARY HUB OIL7-48
CHANGE AIR BRAKE DRIER RESERVOIR 7-57
CHANGE CAB AIR FILTERS7-44
CHANGE CHARGE PUMP OIL FILTER 7-41
CHANGE DEF/ AdBlue FILTER7-43
CHANGE DEF/ AdBlue FILTER7-50
CHANGE ENGINE AIR CLEANER INNER ELEMENT 7-51
CHANGE ENGINE BREATHER FILTER 7-52
CHANGE ENGINE COOLANT FLUID 7-53
CHANGE ENGINE OIL AND FILTER 7-37
CHANGE FRONT PTO GEARBOX OIL 7-48
CHANGE FUEL PRE-FILTER AND FUEL FILTER ELEMENT 7-39
CHANGE MAIN OIL FILTER CARTRIDGE7-45
CHANGE POLY V-BELTS 7-58
CHANGE THE ENGINE AIR CLEANER OUTER ELEMENT 7-15
CHANGE THE ENGINE AIR CLEANER OUTER ELEMENT 7-40
CHANGE TRANSMISSION/ REAR AXLE AND HYDRAULIC OIL 7-46
CHECK 4WD FRONT AXLE DIFFERENTIAL AND HUBS OIL LEVEL7-36
CHECK BATTERY FLUID LEVEL 7-33
CHECK BATTERY FLUID LEVEL 7-49
CHECK BATTERY FLUID LEVEL 7-61
CHECK BRAKE FLUID LEVEL 7-17
CHECK BRAKE PEDAL LATCHING/UNLATCHING 7-66
CHECK ENGINE AIR INTAKE CONNECTIONS 7-42
CHECK ENGINE COOLANT LEVEL 7-18
CHECK ENGINE OIL LEVEL 7-19
CHECK FRONT AND REAR WHEEL NUTS 7-31
CHECK FRONT PTO GEARBOX OIL LEVEL 7-36
CHECK REMOTE CONTROL VALVE DRAIN BOTTLES7-19
CHECK TRANSMISSION OIL COOLER PIPE COUPLINGS 7-43
CHECK TRANSMISSION/REAR AXLE AND HYDRAULIC OIL LEVEL 7-35
CHECK TYRE PRESSURES AND TYRE CONDITION 7-31
CHECK VALVE TAPPET CLEARANCE7-52
CHECK WINDSCREEN WASHER RESERVOIR7-20
CLEAN THE CAB AIR FILTER 7-22
CLEAN THE COOLER SECTION 7-24
CLEANING THE TRACTOR7-63
DRAIN AIR RESERVOIR ON AIR OPERATED TRAILER BRAKE 7-20
DRAIN FUEL SYSTEM WATER SEPARATOR 7-16
ENGINE OIL CHANGE7-6
FUEL REQUIREMENT7-2
FUEL SYSTEM PRE- FILTER AND WATER TRAP 7-65
FUSES AND RELAYS7-79
General specification 7-11
HEADLIGHT AND WORKLAMP ADJUSTMENT 7-74
INSPECT COMPRESSOR DRIVE BELT 7-32
INSPECT POLY V-BELT7-32
INTRODUCTION 7-1
LUBRICANTS AND COOLANTS Lubrications and Coolants7-9
Maintenance Chart 7-13
PREPARATION FOR USE AFTER STORAGE 7-86
PROTECTING THE ELECTRONIC AND ELECTRICAL SYSTEMS DURING BATTERY CHARGING OR
WELDING 7-84
PROTECTIVE DEVICES 7-7
SERVICE OPERATIONS7-21
SERVICE THE AIR CONDITIONER SYSTEM7-60
TRACTOR STORAGE 7-86
TRANSMISSION CLUTCH CALIBRATION7-68
MAINTENANCE CHART 7-13
Maintenance Chart 7-13
MOVING THE UNIT 4-10
OPERATING IN COLD TEMPERATURES4-10
REVERSIBLE ENGINE FAN4-10
OPERATING INSTRUCTIONS4-1
AUTOMATIC ENGINE SHUTDOWN4-8
AUTOMATIC ENGINE SHUTDOWN WITH ENHANCED KEYPAD (where fitted) 4-9
BOOSTING THE BATTERY 4-7
COOLANT IMMERSION HEATER (where fitted) 4-4
FUEL HEATER (where fitted)4-4
GRID HEATER COLD START AID (where fitted) 4-4
OPERATING IN COLD TEMPERATURES4-10
REVERSIBLE ENGINE FAN4-10
STARTING THE ENGINE 4-3
STOPPING THE ENGINE4-8
TRACTOR REFUELLING 4-1
TRANSMISSION OIL HEATER (where fitted) 4-6
OPERATOR’S SEAT3-10
AIR SUSPENSION SEAT DELUXE3-10
SEAT BELT3-15
OVERHEAD CONTROLS 3-40
INTERIOR LIGHT3-41
RADIO/CASSETTE/CD PLAYER (where fitted) 3-40
SWITCH PANEL WORKLIGHTS 3-40
POWERSHIFT CONTROL LEVER6-50
PREPARING FOR ROAD TRANSPORT 5-1
CARRYING THE TRACTOR ON A TRANSPORTER 5-1
SECURE THE HIGH VISIBILITY ROOF PANEL 5-1
REAR HITCH 6-81
ELECTRONIC DRAFT CONTROL 6-81
ELECTRONIC DRAFT CONTROL OPERATION 6-87
EXTERNAL HITCH CONTROLS 6-93
SETTINGS AND DISPLAY 6-85
REAR POWER TAKE-OFF 6-63
ATTACHING PTO DRIVEN EQUIPMENT6-64
AUTO PTO OPERATION 6-76
CHANGING THE PTO OUTPUT SHAFT6-63
EXTERNAL PTO CONTROLS6-74
GROUND DRIVE PTO (where fitted) 6-73
PTO OPERATING PRECAUTIONS 6-63
PTO OPERATION 6-65
THREE-SPEED PTO SYSTEM 6-72
TWO-SPEED PTO SYSTEM 6-70
REARWARD CONTROLS3-29
AUTOMATIC TEMPERATURE CONTROL (ATC)3-38
BATTERY ISOLATOR SWITCH3-34
CLIMATE CONTROLS 3-35
FAST STEERING SYSTEM (where fitted)3-32
HEATED SCREENS (where fitted) 3-31
HYDRAULIC MASTER SWITCH 3-30
MANUAL TEMPERATURE CONTROL3-37
SWITCH PANEL C- PILLAR3-29
RECOVERY TRANSPORT5-2
TOWING THE TRACTOR5-2
RIGHT-HAND SIDE CONTROLS 3-28
INTEGRATED CONTROL PANEL 3-28
SAFETY INFORMATION2-1
BEFORE DRIVING THE TRACTOR2-9
DIESEL FUEL2-16
DRIVING THE TRACTOR 2-10
FIRE EXTINGUISHER 2-18
INTENDED USE STATEMENT 2-22
OPERATING THE EXTERNAL CONTROLS 2-13
OPERATING THE PTO2-13
OPERATING THE TRACTOR 2-11
PREVENTION OF FIRE OR EXPLOSION2-17
PROTECTION OFFERED BY THE TRACTOR 2-19
SAFETY DECALS 2-1
SAFETY PRECAUTIONS2-8
SERVICING THE TRACTOR2-14
SPECIFICATIONS9-1
AIR CLEANER SYSTEM 9-8
BRAKES 9-13
CAPACITIES9-6
COOLING SYSTEM 9-8
ELECTRICAL EQUIPMENT9-14
ENGINE 9-7
FRONT POWER TAKE OFF 9-9
FRONT REMOTE VALVE COUPLERS9-12
FUEL SYSTEM9-7
GENERAL DIMENSIONS9-1
GROUND SPEED CHART FULL POWERSHIFT TRANSMISSION9-18
GROUND SPEED CHART SEMI POWERSHIFT TRANSMISSION9-15
HYDRAULIC SYSTEM 9-10
MAXIMUM OPERATING ANGLE9-4
MINIMUM HARDWARE TIGHTENING TORQUES 9-21
REAR POWER TAKE-OFF 9-9
REMOTE CONTROL VALVES 9-12
STEERING9-13
THREE POINT HITCH 9-10
THREE POINT HITCH FRONT 9-12
TRANSMISSION 9-8
TYPICAL OPERATING WEIGHTS 9-5
STARTING THE UNIT4-3
BOOSTING THE BATTERY 4-7
COOLANT IMMERSION HEATER (where fitted) 4-4
FUEL HEATER (where fitted)4-4
GRID HEATER COLD START AID (where fitted) 4-4
STARTING THE ENGINE 4-3
TRANSMISSION OIL HEATER (where fitted) 4-6
STOPPING THE UNIT 4-8
AUTOMATIC ENGINE SHUTDOWN4-8
AUTOMATIC ENGINE SHUTDOWN WITH ENHANCED KEYPAD (where fitted) 4-9
STOPPING THE ENGINE4-8
STORAGE 7-86
PREPARATION FOR USE AFTER STORAGE 7-86
TRACTOR STORAGE 7-86
SYMPTOM(S) 8-4
BRAKES8-6
CAB 8-7
ELECTRICAL SYSTEM 8-7
ENGINE 8-4
HYDRAULICS 8-5
THREE POINT HITCH8-6
TRANSMISSION 8-5
THREE POINT HITCH6-153
ATTACHING THREE-POINT HITCH EQUIPMENT 6-153
FLEXIBLE LINK END ADJUSTMENT6-158
LIFT ROD ADJUSTMENT 6-155
LINKAGE STABILISER ADJUSTMENT 6-161
QUICK HITCH 6-159
TOP LINK ADJUSTMENT 6-157
TRAILER BRAKING SYSTEMS 6-170
AIR-OPERATED TRAILER BRAKES 6-170
AUXILIARY AIR SUPPLY CONNECTOR (where fitted)6-173
HYDRAULIC TRAILER BRAKES 6-174
TRAILER BRAKE BIAS CONTROL 6-173
TRANSMISSION 6-27
AUTO SHIFT FUNCTION6-36
AUTO SHIFT FUNCTION6-53
AUTO SHIFTING AND ’GO TO’ MODES 6-56
AUTO SHIFTING IN FIELD MODE 6-37
AUTO SHIFTING IN FIELD MODE 6-54
AUTO SHIFTING IN ROAD MODE6-38
AUTO SHIFTING IN ROAD MODE6-55
CHANGING GEAR SHIFT THRESHOLD 6-43
CHANGING THE FIELD MODE AUTO SHIFT POINT 6-44
CHANGING THE GEAR SPAN 6-41
CHANGING THE GEAR SPAN 6-57
CREEPER GEARS (where fitted) 6-48
CREEPER GEARS (where fitted) 6-61
DRIVING THE TRACTOR 6-34
DRIVING THE TRACTOR 6-51
ERROR CODES 6-62
FOOT THROTTLE PEDAL 6-28
FULL POWERSHIFT TRANSMISSION6-49
HAND THROTTLE6-28
POWERSHIFT CONTROL LEVER6-32
PROGRAMMING REVERSE GEAR RATIOS 6-46
PROGRAMMING REVERSE GEAR RATIOS 6-59
SEMI POWERSHIFT TRANSMISSION6-31
SHUTTLE LEVER6-29
SPEED MATCHING 6-31
SPEED MATCHING 6-49
STANDBY IN FIELD AND ROAD MODE 6-58
START OFF GEAR 6-39
TRANSMISSION OPERATION 6-31
TRANSMISSION OPERATION 6-49
TRANSPORT OPERATIONS 5-1
CARRYING THE TRACTOR ON A TRANSPORTER 5-1
SECURE THE HIGH VISIBILITY ROOF PANEL 5-1
TOWING THE TRACTOR5-2
TROUBLESHOOTING 8-1
BRAKES8-6
CAB 8-7
ELECTRICAL SYSTEM 8-7
ENGINE 8-4
FAULT CODES AND SYMBOLS 8-2
HYDRAULICS 8-5
INTRODUCTION 8-1
THREE POINT HITCH8-6
TRANSMISSION 8-5
WHEEL TRACK ADJUSTMENT 6-175
BAR TYPE AXLE (where fitted) 6-185
DUAL REAR WHEELS (where fitted) 6-190
FLANGE TYPE AXLE (where fitted) 6-182
FRONT AXLE OSCILLATION STOPS6-179
FRONT FENDER6-180
FRONT WHEEL ALIGNMENT6-178
FRONT WHEEL TRACK ADJUSTMENT6-175
REAR WHEEL TRACK ADJUSTMENT 6-182
STEERING STOPS 6-179
WHEN THE WARNING LAMP LIGHTS 7-15
CHANGE THE ENGINE AIR CLEANER OUTER ELEMENT 7-15
CHECK BRAKE FLUID LEVEL 7-17
DRAIN FUEL SYSTEM WATER SEPARATOR 7-16
WORKING OPERATIONS 6-1
AIR-OPERATED TRAILER BRAKES 6-170
ATTACHING PTO DRIVEN EQUIPMENT6-64
ATTACHING THREE-POINT HITCH EQUIPMENT 6-153
AUTO PTO OPERATION 6-76
AUTO SHIFT FUNCTION6-36
AUTO SHIFT FUNCTION6-53
AUTO SHIFTING AND ’GO TO’ MODES 6-56
AUTO SHIFTING IN FIELD MODE 6-37
AUTO SHIFTING IN FIELD MODE 6-54
AUTO SHIFTING IN ROAD MODE6-38
AUTO SHIFTING IN ROAD MODE6-55
AUTOMATED HEADLAND FUNCTIONS 6-11
AUXILIARY AIR SUPPLY CONNECTOR (where fitted)6-173
AUXILIARY FRONT COUPLERS (where fitted) 6-103
BALLASTING AND TYRES6-193
BAR TYPE AXLE (where fitted) 6-185
CHANGING GEAR SHIFT THRESHOLD 6-43
CHANGING THE FIELD MODE AUTO SHIFT POINT 6-44
CHANGING THE GEAR SPAN 6-41
CHANGING THE GEAR SPAN 6-57
CHANGING THE PTO OUTPUT SHAFT6-63
CONNECTING REMOTE CYLINDERS 6-112
CONNECTING REMOTE CYLINDERS 6-138
CONSTANT ENGINE SPEED6-3
CREATING TIMER PROGRAMMES 6-131
CREEPER GEARS (where fitted) 6-48
CREEPER GEARS (where fitted) 6-61
DELETING A SEQUENCE 6-26
DIAGNOSTIC SOCKET6-204
DIFFERENTIAL LOCK6-6
DRAWBARS AND TOWING ATTACHMENTS 6-164
DRIVING THE TRACTOR 6-34
DRIVING THE TRACTOR 6-51
DUAL REAR WHEELS (where fitted) 6-190
ELECTRICAL POWER CONNECTORS 6-205
ELECTRONIC DRAFT CONTROL 6-81
ELECTRONIC DRAFT CONTROL OPERATION 6-87
ERROR CODES 6-62
EXPLANATION OF SYMBOLS 6-16
EXTERNAL EHR CONTROLS6-147
EXTERNAL HITCH CONTROLS 6-93
EXTERNAL HITCH CONTROLS 6-105
EXTERNAL PTO CONTROLS6-74
EXTERNAL POWER CONNECTORS6-207
FLANGE TYPE AXLE (where fitted) 6-182
FLEXIBLE LINK END ADJUSTMENT6-158
FOOT THROTTLE PEDAL 6-28
FOUR WHEEL DRIVE6-8
FRONT AXLE OSCILLATION STOPS6-179
FRONT AXLE SUSPENSION (where fitted) 6-10
FRONT FENDER6-180
FRONT WHEEL ALIGNMENT6-178
FRONT WHEEL TRACK ADJUSTMENT6-175
FULL POWERSHIFT TRANSMISSION6-49
GROUND DRIVE PTO (where fitted) 6-73
HAND THROTTLE6-28
HITCH OPERATION 6-98
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-114
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-148
HYDRAULIC POWER BEYOND FOR EXTERNAL SERVICES 6-150
HYDRAULIC TRAILER BRAKES 6-174
INTERNAL POWER CONNECTORS 6-205
IRON WEIGHTS (where fitted)6-196
JOYSTICK OPERATION WITH A FRONT LOADER6-142
LIFT ROD ADJUSTMENT 6-155
LINKAGE STABILISER ADJUSTMENT 6-161
LIQUID BALLAST 6-199
MID MOUNT REMOTE VALVES 6-145
OPERATING WITH REMOTE VALVES 6-108
OPERATING WITH REMOTE VALVES 6-140
PTO OPERATING PRECAUTIONS 6-63
PTO OPERATION 6-65
PTO OPERATION 6-79
POWERSHIFT CONTROL LEVER6-32
PROGRAMMING REVERSE GEAR RATIOS 6-46
PROGRAMMING REVERSE GEAR RATIOS 6-59
QUICK GUIDE6-11
QUICK HITCH 6-159
RE-PLAYING A SEQUENCE6-22
REAR WHEEL TRACK ADJUSTMENT 6-182
RECORDING A SEQUENCE 6-17
RECORDING AND RE-PLAYING 6-13
REMOTE CONTROL VALVES6-106
REMOTE CONTROL VALVES6-116
SEMI POWERSHIFT TRANSMISSION6-31
SETTING THE REMOTE VALVE PRIORITY6-129
SETTINGS AND ADJUSTMENTS 6-95
SETTINGS AND ADJUSTMENTS6-123
SETTINGS AND DISPLAY 6-85
SHUTTLE LEVER6-29
SPEED MATCHING 6-31
SPEED MATCHING 6-49
STANDBY IN FIELD AND ROAD MODE 6-58
START OFF GEAR 6-39
STEERING STOPS 6-179
SWINGING DRAWBARS 6-167
THREE-SPEED PTO SYSTEM 6-72
TOP LINK ADJUSTMENT 6-157
TRAILER BRAKE BIAS CONTROL 6-173
TRAILER SOCKET ELECTRICAL6-204
TRANSMISSION OPERATION 6-31
TRANSMISSION OPERATION 6-49
TWO-SPEED PTO SYSTEM 6-70
TYRE INFLATION 6-201
TYRE PRESSURES AND PERMISSIBLE LOADS 6-202
VARIABLE ENGINE POWER MANAGEMENT6-1

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer