Cat Bucyrus 49RIII Blast Hole Drill Operator’s Manual SN 141069 – PDF DOWNLOAD
$28.95
Cat Bucyrus 49RIII Blast Hole Drill Operator’s Manual SN 141069 – PDF DOWNLOAD
Description
Cat Bucyrus 49RIII Blast Hole Drill Operator’s Manual SN 141069 – PDF DOWNLOAD
FILE DETAILS:
Cat Bucyrus 49RIII Blast Hole Drill Operator’s Manual SN 141069 – PDF DOWNLOAD
Language : English
Pages : 215
Downloadable : Yes
File Type : PDF
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Cat Bucyrus 49RIII Blast Hole Drill Operator’s Manual SN 141069 – PDF DOWNLOAD
SAFETY PRECAUTIONS AND PRESTART CHECKS:
Safe operation of a rotary blast hole drill promotes personal safety and minimizes delays
and costly damage to equipment. Carefully study and follow all recommended procedures in this
manual. Safety guidelines are intended to help prevent accidents from occurring and are provided
in the interest of all mine personnel. Overall safety depends upon a good sense of judgment and
alertness on the part of the entire mining crew.
SPECIFIC SAFETY RULES:
The following is a list of some important safety rules relating to prestart and operation of the
49RIII drill. The safety instructions given in this manual cover normal daily operations of the
machine. Additional precautions may be necessary to cover unusual circumstances. Be constantly
alert for any potentially dangerous conditions and take action as necessary to correct
the conditions immediately.
clothing can be caught on controls or in moving parts. Remove all jewelry.
slippery conditions or obstacles which create tripping hazards.
position on the machine.
this purpose.
shown on the STABILITY CHART at the end of this section.
TABLE OF CONTENTS:
Cat Bucyrus 49RIII Blast Hole Drill Operator’s Manual SN 141069 – PDF DOWNLOAD
SAFETY PRECAUTIONS AND PRESTART CHECKS 5
SPECIFIC SAFETY RULES 5
OPERATION NEAR ELECTRICAL TRANSMISSION LINES 7
PRESTART CHECKS 9
EXTERNAL INSPECTION 9
ONBOARD INSPECTION 11
PRESTART LUBRICATION 14
CONTROLS – LOCATION AND FUNCTION 15
OPERATOR’S CONTROL CONSOLE 16
MAIN CONTROL PANEL 17
HOIST/PULLDOWN RHEOSTAT 18
ROTARY RHEOSTAT 18
DRILUPROPEL CONTROLS ON AND OFF PUSH-BUTTON 18
HOIST/PULLDOWN SPEED SELECTOR SWITCH 19
ROTARY SPEED SELECTOR SWiTCH 20
HOIST BRAKE SWiTCH 20
PIPE RACK SELECTOR SWITCH 20
PIPE RACK JOYSTICK (LEFT CRAWLER PROPEL) 20
WINCH/MAST SELECTOR SWITCH 21
MASTIWINCH JOYSTICK (RIGHT CRAWLER PROPEL) 21
TOOL WRENCH SWiTCH 22
DUST CURTAIN SWITCH 22
BIT VIEW HATCH SWITCH 22
PROPEL CONTROL PANEL 23
EMERGENCY STOP PUSH-BUTTON (OPTIONAL) 23
PROPEL SPEED SELECTOR SWiTCH 23
COMPRESSOR STOP PUSH-BUTTON 24
COMPRESSOR VENTIDRILL SWITCH 24
HEATERIVENT/AIR CONDITIONER CONTROLS 24
OPERATING MODE SELECTOR SWITCH 24
PROPEL JOYSTICKS 24
SELECTOR SWITCH PANEL 26
BREAKOUT WRENCH SWiTCH 26
PIPE POSITIONER SWITCH (OPTIONAL) ‘” 27
DUST SEAL SWITCH (OPTIONAL) 27
A-FRAME LOCK SWITCH (OPTIONAL) 27
MAST BRACE LOCK SWiTCH 27
MAST LOCK SWITCH 27
BOARDING STAIRS SWITCH 28
PEDESTAL HEATER SWITCH (OPTIONAL) 28
FIRE SUPPRESSION SYSTEM INDICATORS (OPTIONAL) 28
RADIO 28
MANUAL NO. 10050, OCTOBER 99 OPERATOR’S MANUAL – 1
BI005589
BI005589
BUCYRUS INTERNATIONAL INC.
SOCIETE NATIONALE INDUSTRIELLE ET MINIERE – 49RI/I ELECTRIC BLAST HOLE DRILL – 141069
.. -~
BUCYRUS
”’~.
LEVELING CONTROL PANEL 29
MANUAL LEVELING JOySTiCKS 29
AUTOMATIC LEVELING SWITCH 30
WATER INJECTION ON/OFF SWITCH (OPTIONAL) 30
WATER INJECTION FLOW CONTROL (OPTIONAL) 30
HORN PUSH-BUTTON 30
DEPTH INDICATOR RESET PUSH-BUTTON 30
PROGRAMMED DRILL CONTROL SWITCH 31
EMERGENCY STOP PUSH-BUTTON (OPTIONAL) 31
OPERATOR’S DISPLAY TERMINAL 32
MACHINERY HOUSE CONTROLS 33
LIGHTING LOAD CENTER 33
CONTROLS LOCATED ON LOW VOLTAGE START CABINET 34
CONTROLS LOCATED ON LOW VOLTAGE CABINET 34
CONTROL LOCATED ON PROGRAMMABLE CONTROLLER CABINET 35
HOIST/PULLDOWN AND ROTARY DRIVE CONTROL CABINETS 35
CONTROLS LOCATED ON OR NEAR AIR COMPRESSOR 36
MISCELLANEOUS CONTROLS 36
PORTABLE REMOTE PROPEL STATION (OPTIONAL) 37
HYDRAULIC RESERVOIR REMOTE FILL CONTROL PANEL 37
LUBE CONTROL PANEL 38
START-UP 39
MACHINE START UP 39
MACHINERY CHECK 40
BREAK-IN OF NEW COMPONENTS 40
ROTARY DRIVE UNIT BREAK-IN .40
HOIST/PULLDOWN GEARCASE BREAK-IN 40
ELECTRIC MOTOR BREAK-IN 41
OPERATION 42
PROPELLING 42
DEFINITIONS 42
PROPEL PROCEDURE 43
TOWING PROCEDURE 48
CABLE REEL OPERATION 50
LEVELlNG 51
MAST RAISING AND LOWERING 53
MAST RAISING 53
MAST LOWERING 55
PULDOWN MACHINERY OPERATION 58
AUXILIARY WINCH OPERATION 59
PIPE RACK OPERATION 60
TOOL HANDLING 64
PIPE LOADING AND UNLOADING 64
DRILL TOOL STRING ASSEMBLY 66
BREAKOUT WRENCH OPERATION 72
DRILL TOOL STRING DiSASSEMBLy 73
ADDING ADDITIONAL DRILL PIPE 75
REMOVAL OF MULTIPLE SECTION DRILL PIPE 77
ANGLE DRILLING 78
2 – OPERATOR’S MANUAL MANUAL NO. 10050, OCTOBER 99
BUCYRUS INTERNATIONAL INC.
SOCIETE NATIONALE INDUSTRIELLE ET MINIERE – 49RIII ELECTRIC BLAST HOLE DRILL – 141069
DUST SUPPRESSION SYSTEM OPERATION 81
DRILLING 83
VERTICAL DRILLING 83
STARTING THE HOLE (COLLARING) 84
NORMAL DRILLING 86
ENDING THE HOLE 87
ENDING THE HOLE (MULTIPLE PIPE SECTIONS) 88
DRILLING DIFFICULT FORMATIONS 89
UNCONSOLIDATED MATERIALS 89
WET OR STICKY FORMATIONS 92
ANGLE DRILLING 93
PROGRAMMED DRILL CONTROL DRILLING 94
PREPARING TO MOVE 95
MACHINE SHUTDOWN 97
SHUT DOWN PROCEDURE 97
SHORT TERM STORAGE 99
LONG TERM STORAGE 101
ATTENDED LONG TERM STORAGE 101
UNATTENDED LONG TERM STORAGE 101
TOOL RECOVERY 103
DRILL STABILITY CHART 105
Contact us: [email protected]
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V
