Caterpillar EP20KT Lift Truck Service Manuals – PDF DOWNLOAD

Description

Caterpillar EP20KT Lift Truck Service Manuals – PDF DOWNLOAD

DESCRIPTION:

Caterpillar EP20KT Lift Truck Service Manuals – PDF DOWNLOAD

FOREWORD :

• This service manual is a guide to servicing of Cat® lift trucks. The instructions are grouped by systems to serve the convenience of your ready reference. Long productive life of your lift trucks depends to a great extent on correct servicing — servicing consistent with what you will learn from this service manual.
• Read the respective sections of this manual carefully and familiarize yourself with all the components you will work on, before attempting to start a test, repair or rebuild job. The descriptions, illustrations and specifications contained in this manual are of the trucks with the serial numbers in effect at the time it was approved for printing. Cat lift truck reserves the right to change specifications or design without notice and without incurring obligation.

SAFETY PRECAUTIONS:

The serviceman or mechanic may be unfamiliar with many of the systems on this truck. This makes it important to use caution when performing service work. A knowledge of the system and/or components is important before the removal or disassembly of any component. Because of the size of some of the truck components, the serviceman or mechanic should check the weights noted in this Manual. Use proper lifting procedures when removing any components. Following is a list of basic precautions that should always be observed.

1. Read and understand all warning plates and decals on the truck before operating, lubricating or repairing the product.
2. Always wear protective glasses and protective shoes when working around trucks. In particular, wear protective glasses when pounding on any part of the truck or its attachments with a hammer or sledge. Use welders gloves, hood/goggles, apron and other protective clothing appropriate to the welding job being performed. Do not wear loosefitting or torn clothing. Remove all rings from fingers when working on machinery.
3. Do not work on any truck that is supported only by lift jacks or a hoist. Always use blocks or jack stands to support the truck before performing any disassembly.
4. Lower the forks or other implements to the ground before performing any work on the truck. If this cannot be done, make sure the forks or other implements are blocked correctly to prevent them from dropping unexpectedly.
5. Use steps and grab handles (if applicable) when mounting or dismounting a truck. Clean any mud or debris from steps, walkways or work platforms before using. Always face truck when using steps, ladders and walkways. When it is not possible to use the designed access system, provide ladders, scaffolds, or work platforms to perform safe repair operations.

TABLE OF CONTENTS:

Caterpillar EP20KT Lift Truck Service Manuals – PDF DOWNLOAD

Caterpillar EP16KT Controller Lift Truck Service Manual

CONTROLLER
TROUBLESHOOTING FOR CONTROL CIRCUITS
MOTORS

Caterpillar EP16KT Chassis, Mast & Options Lift Truck Service Manual

GENERAL INFORMATION
VEHICLE ELECTRICAL
COMPONENTS
Serial number locations, Dimensions, Technical data
Console box, Key switch, Lamp specification chart
POWER TRAIN
TRANSFER UNITS
REAR AXLE
Procedure and suggestions for removal and installation
Procedures and suggestions for disassembly and reassembly
BRAKE SYSTEM
STEERING SYSTEM
Rear axle, Rear wheels
Caliper, Brake pedal, Master cylinder
Steering control valve
HYDRAULIC SYSTEM
MASTS AND FORKS
Tank, Pump, Control valve, Lift and tilt cylinders, Flow regulator valve,
Down safety valve
Simplex mast, Duplex mast, Triplex mast
SERVICE DATA
Inspection standards, Periodic replacement of parts, Lubrication
standards, Main component weight, Tightening torque for standard bolts
and nuts, Special tools
OPTIONS

CATERPILLAR EP20KT LIFT TRUCK SERVICE MANUALS – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V