Caterpillar NOL10N Lift Trucks Operation & Maintenance Manual – PDF DOWNLOAD

Description

Caterpillar NOL10N Lift Trucks Operation & Maintenance Manual – PDF DOWNLOAD

DESCRIPTION:

Caterpillar NOL10N Lift Trucks Operation & Maintenance Manual – PDF DOWNLOAD

Safety instructions
Instructions for site supervisor
• Familiarise yourself with the operating instructions and its contents.
• Train the operator on the use, safety, and maintenance aspects of the truck.
• Control that the operating and maintenance instructions, and safety regulations are observed.
Occupational safety
• Keep the truck clean and in good working order. Carry out the daily and weekly maintenance checks in
accordance with the maintenance schedule and instructions to avoid faults and operational errors.
• If you notice any faults or deficiencies that may effect the safe operation of the truck, take the truck out of
operation until the faults or deficiencies have been remedied.
• Do not repair anything on the truck without permission from the site supervisor.
• In the event of a malfunction, switch off the power and notify the site supervisor.
• When using the truck, you are responsible for both your own safety and the safety of your environment.
• Immediately notify the site supervision of any accidents or injuries. In such a case, leave the truck at the place
of the accident.
• The truck can only be used for purposes corresponding with its equipment.
Truck operator
Requirements:
• At least 18 years old
• Sufficient physical (e.g. good hearing and sight) and mental abilities for operating the truck without risks
• Appropriately trained; familiar with operating, safety and maintenance instructions
• Has permission from the site supervision to operate the truck
• Knows and masters the drive and operational features of the truck

TABLE OF CONTENTS:

Caterpillar NOL10N Lift Trucks Operation & Maintenance Manual – PDF DOWNLOAD

Parameter explanations for the EPS......... 5
	Main menu: Parameter change............ 5
		SPEED LIMIT........................ 5
		AUX FUNCTION #3.................... 5
		SENSITIVITY........................ 5
		AUX FUNCTION #2.................... 5
		CREEP SPEED........................ 5
		KP................................. 5
		POS. ACCURACY...................... 6
		DYNAM NUMB SPEED................... 6
		DYNAM NUMB ANG..................... 6
		COMPENSATION....................... 7
		1ST ANGLE COURSE................... 7
		2ND ANGLE COURSE................... 7
		AUXILIARY TIME..................... 7
		ANTIROLLBACK....................... 7
		LAG FB REGULAT..................... 8
		LEAD FB REGULAT.................... 8
	Config Menu: Set options............... 8
		HOUR COUNTER....................... 8
		MICRO CHECK........................ 8
		ENCODER CONTROL.................... 9
		FEEDBACK DEVICE.................... 9
		AUTOCENTERING...................... 9
		RECOVERY AT REST................... 9
		AUX FUNCTION 1..................... 9
		DIAG MOTOR TEMP.................... 9
	Submenu: SET MODEL..................... 9
		SYSTEM CONFIG...................... 9
		AUTO REQ TYPE......................10
		CONNECTED TO.......................10
		MODEL TYPE.........................10
	Submenu: ADJUSTMENTS...................10
		ADJUSTMENT #01.....................10
		SET CURRENT........................10
		ADJUSTMENT #02.....................10
		ADJUSTMENT #03.....................11
		ADJUSTMENT #04.....................11
		SET BATTERY TYPE...................11
		SET SAT. FREQ......................11
		OVERSAT FREQ.......................11
		MAXIMUM SLIP.......................11
		AUX VOLTAGE #1.....................11
		AUX VOLTAGE #2.....................12
		NO LOAD CURRENT....................12
		ZERO SP POT........................12
		SET 0-POS..........................12
		SET STEER 180......................12
		SET ENC AT 180.....................12
		SET ENC AT 360.....................13
	Submenu: SPECIAL ADJUST................13
		SET TEMPERATURE....................13
		HIGH ADDRESS.......................13
		DEBUG OUTPUT.......................13
	Submenu: HARDWARE SETTINGS.............13
		MAXIMUM CURRENT....................13
		CAN BUS............................14
		SET HI RESOL AD....................14
		AUTOTEACHING.......................14
		AUX FUNCTION 11....................14
Adjustment instructions....................15
Adjustment instructions....................18
TESTER FUNCTIONS FOR THE EPS...............60
	STEPPER MOTOR..........................60
	ENC COUNT AT 180.......................60
	TRUCK SPEED............................60
	SLOPE PEAK.............................60
	WHEEL ANGLE............................60
	HIGH RESOL: AD.........................60
	TRUCK MOVING...........................60
	SM ALARM SWITCH........................61
	MM ALARM SWITCH........................61
	AUTO IN PROGRESS.......................61
	ACW LIMIT LEVEL........................61
	CW LIMIT LEVEL.........................61
	END STROKE ACW.........................61
	END STROKE CW..........................62
	ENC SPEED..............................62
	MOTOR CURRENT..........................62
	MOTOR VOLTAGE..........................62
	SAT FREQ HZ............................62
	FREQUENCY..............................62
	MOTOR TEMPERAT.........................62
	TEMPERATURE............................62
	FEEDBACK ENC...........................63
	FEEDBACK SECTOR........................63
TS1260000..................................69
	3-6991:  NOL10N,NOL10NF,NOL10NV........69
		1: POWER SUPPLY 24 V...............69
		2: MAINCIRCUITS....................70
		3: DRIVE CIRCUIT...................71
		4: DRIVE CIRCUIT 2.................72
		5: STEERING CIRCUIT................73
		6: DISPLAY AND CONTROL CIRCUITS....74
		7: FANS, AUX. DEVICES..............75
		8: COLD STORAGE....................76
		9: PEDESTRIAN CONTROL..............77
		10: INSTR. PANEL GROUNDING.........78

CATERPILLAR NOL10N LIFT TRUCKS OPERATION & MAINTENANCE MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V