Deutz-Fahr Agrotron 80 85 90 100 105 MK3 Original Parts Catalog 2003 – PDF Download

Description

Deutz-Fahr Agrotron 80 85 90 100 105 MK3 Original Parts Catalog

This is the original parts catalogue for the Deutz-Fahr Agrotron MK3 series, covering the Agrotron 80 MK3, Agrotron 85 MK3, Agrotron 90 MK3, Agrotron 100 MK3 and Agrotron 105 MK3 tractors. Issued under document number 307837136 (internal code 307.8371.3.6) and dated 09-03, it is a complete exploded-view parts reference used to identify and order components across every major assembly of these tractors. Every illustration, code number, position figure and quantity in the catalog corresponds directly to the parts fitted to these machines, making it the most precise reference available for anyone maintaining or restoring an Agrotron MK3.

File Details

• Manual type: Original Parts Catalog (Ersatzteilkatalog / Catalogo ricambi)
• Brand: Deutz-Fahr (Same Deutz-Fahr)
• Models covered: Agrotron 80 MK3, Agrotron 85 MK3, Agrotron 90 MK3, Agrotron 100 MK3, Agrotron 105 MK3
• Document number: 307837136 / 307.8371.3.6
• Date: 09-03
• Language: Multilingual (German, English, Italian plus French, Spanish, Dutch, Portuguese, Finnish and Danish abbreviations)
• Page count: 956
• File format: PDF

Chapters Covered

The catalog is organized into six main reference groups, each made up of one or more sheets. The last sheet of every reference carries the letter F (Fine / End).

• MOTOR / ENGINE / MOTORE (Ref. 101) – crankcase and crankcase breather, front cover, oil pan, fastenings, cylinder head, valve mechanism cover, rocker arm bracket, oil cooler, filter cartridge, injection pump, injector, glow plug, fuel supply, turbocharger, generator, starter, cable harness, gasket sets, cooling system, exhaust, thermostat, adapter, fan support
• FAHRGESTELL / CHASSIS / TELAIO (Ref. 103) – clutch control (with and without hydraulic shuttle), gear shift, super-reduction control, gearbox housing, layshafts (with and without Powershuttle), main shaft, gearbox control unit, clutch, splitter, bevel wheel gear, oil supply, front transmission, differential and rear half-shafts, rear gearbox case, rear brakes, rear axle mountings, lifting
• KABINE / CAB / CABINA (Ref. 438) – cab, cab installation completion, roof (with and without skylight), High Visibility roof, interior trim, control consoles (left/right), doors, windscreen, rear windows, mirrors, sun blinds, radio kit, climate control, air conditioning lines and condenser
• VORDERER KRAFTHEBER / FRONT HYDRAULIC POWER-LIFT / SOLLEVATORE ANTERIORE (Ref. 504)
• S.A.C. (Ref. 505) – lifting cylinder, rear lift control, sensing elements with electronic control
• ZUBEHR / ACCESSORY / ACCESSORI (Ref. 509) – hydraulic control valves (4-way and 8-way), flow control, quick-action couplers, three-point coupling, rear towing hitches, front ballast, trailer braking systems, air braking systems, pick-up hitch, towing bars, front towing hitch, catching mouth, front weight carrier and weights

Within the Chassis group the catalog is further subdivided into front axle, transmission, power take-off, rear axle, hydrosteering, body work, lighting system and wheels. Two additional sections at the end cover engine-side components (accumulator, steering column, dry air filter, seat parts, headlamp components, electrical system parts, compressor parts, valve parts).

What This Catalog Gives You

Every entry lists a figure reference, a Deutz-Fahr code number, a quantity, and a description in three languages (German, English, Italian). Exploded-view illustrations accompany the tables so that the exact position of every component can be confirmed before ordering. The catalog uses the standard Deutz-Fahr abbreviations – A for front, P for rear, DX for right, SX for left, SUP for upper, INF for lower, Rich.M for parts supplied by the metre, and Z = 10 for gears with ten teeth – all explained in the introduction. Assembly serial-number breakpoints are marked with , so the correct variant can be selected for a specific machine.

Models and Engines Referenced

Engine assemblies covered in the gasket-set and engine sections reference the BF 4M1012 and BF 6M1012/E engine families fitted to the Agrotron MK3 range. Serial-number ranges are listed for each model throughout the catalog so that parts applicable to a specific build can be identified:

• Agrotron 80 MK3 – ranges start from 00738056 and extend through 00867439
• Agrotron 85 MK3 – ranges start from 00733962 and extend through 00863882
• Agrotron 90 MK3 – ranges start from 00733963 and extend through 00866906
• Agrotron 100 MK3 – ranges start from 00733125 and extend through 00842542
• Agrotron 105 MK3 – ranges start from 00734311 and extend through 00843940

Why This Matters

Deutz-Fahr parts catalogs are the reference every parts counter and workshop uses when a part number must be right the first time. For an Agrotron MK3 that is now a classic working tractor, the original catalog is often the only reliable way to match a component to its serial-number variant, verify fasteners and seals, or source a sub-component of a larger assembly rather than replacing the whole unit. It also lets you plan a repair properly before lifting a spanner.

Delivery

IMAGES PREVIEW

The catalog is delivered as an instant-download PDF. No shipping, no waiting. Read it on any device – laptop, tablet, phone or workshop PC – and print any page you need at the bench.