Doosan B10R-5 B13R-5 B15R-5 B16R-5 Lift Truck Parts Book SB1088E04

Description

Doosan B10R-5 B13R-5 B15R-5 B16R-5 Parts Book SB1088E04

This is the Doosan B10R-5 B13R-5 B15R-5 B16R-5 parts book, document number SB1088E04, covering the 1.0, 1.3, 1.5 and 1.6 tonne electric counterbalance lift trucks built on the 24-volt AC electric system platform. It is a full illustrated parts catalogue, not a service manual, and it is the reference a workshop, parts counter or fleet owner uses to identify and order the correct components for these trucks. Every assembly is broken down into exploded diagrams with numbered call-outs that tie directly to tabulated part numbers, quantities and descriptions.

The Doosan B10R-5 B13R-5 B15R-5 B16R-5 parts book is organised into six major groups: Chassis Component, Capacity Module, Option For Complete Truck, Option For General, Mast Hydraulic and Mast-Implements. Each group is further divided into figure numbers, so a specific assembly such as the drive axle, the hydraulic tank, the tilt cylinder or the fingertip valve can be found quickly rather than scanning the whole book.

File Details

• Manual type: Illustrated parts book / parts catalogue
• Brand: Doosan
• Models covered: B10R-5, B13R-5, B15R-5, B16R-5
• Document number: SB1088E04
• Language: English
• System: 24 Volt AC Electric System (CV Value 1340)
• File format: PDF

Serial Number Coverage

The parts book lists separate applicability by engineering model number and model code, with serial breaks shown against individual part numbers. The serial ranges printed in the document are:

• KZ-00001 ~ UP
• L1-00001 ~ UP
• L2-00001 ~ UP
• L3-00001 ~ UP
• FBA0S-1340-00001 ~ UP
• FBA0T-1340-00001 ~ UP
• FBA0U-1340-00001 ~ UP

Model codes are assigned as follows: B13R-5 uses FBA0S, B15R-5 uses FBA0T and B16R-5 uses FBA0U. Where a part was changed during production, the catalogue prints the old number, the new number and the serial number at which the change took effect, so the correct component can be selected for the truck in front of you.

Chapters Covered

• 1. Chassis Component
  • Frame Group
  • Battery Roll Out Group
  • Lines Group – Power Steering
  • Control Group – Brake (Parking and Service)
  • Mounting Group – Tilt
  • Mounting Group – Tank
  • Tank Group
  • Priority Valve Group
  • Mounting Group – Motor
  • Pump Motor – AC
  • Mounting Group – Pump
  • Hydraulic Pump
  • Lines Group – Tank
  • Lines Group – Tilt
  • Lines Group – Brake
  • FCU – Basic (Steering Group, Parking System, Cover Group)
  • RCU Mounting – BSC
  • Mounting Group – Drive Axle
  • Front Axle LH and RH
  • Control Group – Accelerator
  • Floor Plate Group
  • Panel Group – Control
  • Controller Assembly
  • Wiring Group
  • Drive Group – B10/13R-5 and B15/16R-5
  • Drive Axle
  • Transfer Assembly
  • Motor Group – Drive
• 2. Capacity Module
  • Counterweight Group (1.0, 1.3, 1.5 and 1.6 Tonne)
  • Panel Group – Outer
  • Panel Group – Top
  • OHG – Basic
  • Location Chart – Part 1 of 2
  • Location Chart – Part 2 of 2
• 3. Option For Complete Truck
  • Wheel & Tire Group – Solid
  • Wheel & Tire Group – Pneumatic
  • Lamp Group – Head (Standard)
  • Seat Group – Suspension (Non NACD, Arm Rest, NACD, Standard)
  • Static Seat Group – With and Without Hip Restraint (Vinyl and Cloth)
  • Valve Assembly – 2 Section / 2 Lever, 3 Section / 3 Lever, 4 Section / 4 Lever
  • Switch Group
  • Bracket Assembly – 2, 3 and 4 Lever
  • Valve Group – Control (2, 3 and 4 Spool)
  • Section Group – Valve
  • Connector Group – Battery (SB Type, SBE Type)
• 4. Option For General
  • Tray Group
  • Mirror Group
  • Lighting Group
  • Lamp Assembly – Head and Turn Signal (Halogen)
  • Stand Group
  • Tool Group
  • Changeover Assembly – 3 Section 3 Lever to 4 Section 4 Lever
  • Mono Pedal Switch
  • Rear Grab Bar – With Horn
  • Changeover Assembly – Battery Roll In Out
  • Valve Assembly – Fingertip (3 Way and 4 Way)
  • Lines Group – 3 Way and 4 Way Fingertip
  • Inlet Section, Lift Section, Tilt Section, AUX Section
  • Hood Group – Fingertip
  • Mount Group – Armrest 3 Way and 4 Way
  • Armrest Assembly – 3 Way and 4 Way
  • Wiring Group – Fingertip
  • Changeover Assembly – Cooling Fan Kit
• 5. Mast Hydraulic
  • Mounting Group – Mast (STD, FFT, FFL)
  • Mounting Group – Lift (STD, FFT, FFL)
  • Lines Group – ATT Primary (3 Way and 4 Way)
  • Lines Group – ATT Secondary (3 Way and 4 Way)
  • Lines Group – ATT Sideshift
  • Cylinder Group – Tilt
• 6. Mast-Implements
  • Mast Group – Basic (STD, FFL, FFT)
  • Mast Assembly – STD, FFT, FFL
  • Relay Group – Lift (STD, FFT, FFL)
  • Lift Group – Secondary Cylinder (STD, FFT, FFL)
  • Lift Group – Primary Cylinder (FFT, FFL)
  • Carriage Group
  • Mounting Group – Carriage
  • Side Shifter Group
  • Cylinder Assembly – Side Shifter
  • Load Backrest
  • Integral Side Shifter / Fork Positioner
  • Lines Group – Carriage
  • Mounting Group – Fork Positioner
  • Backrest Group – Fork Positioner
  • Fork Group

Working through the Doosan B10R-5 B13R-5 B15R-5 B16R-5 parts book as a whole gives a parts technician or workshop the ability to strip, identify and rebuild almost any assembly on these trucks. The electrical section alone documents the accelerator pedal, directional switch, AC drive motor, drive motor speed sensor, AC pump motor, back-up alarm, 24 V horn, DC/DC converter, ignition switch, key set and return filter. The hydraulic section lists the tilt cylinder seal kit, lift cylinder seal kits for both primary and secondary cylinders and the various hose and pipe assemblies. The brake section covers the master cylinder, its service kit, the hand brake switch, the disc, the parking cable and the front axle brake discs and actuators.

For each figure the tabulated data records the S/C reference, item number, part number, quantity, part name and description. Where a component is part of a larger serviceable assembly, the indentation convention in the parts list makes the relationship clear, so a buyer knows whether a part must be ordered on its own or comes as part of a kit.

Why This Parts Book Is Useful

Ordering the wrong part on an electric forklift is expensive and slow. A single digit difference in a part number can mean a component that looks identical but has a different bore, seal material or mounting flange. The Doosan B10R-5 B13R-5 B15R-5 B16R-5 parts book removes that risk by tying every part number to a specific figure and a specific serial number range. Because the catalogue distinguishes between the B13R-5, B15R-5 and B16R-5 model codes, a parts person can confirm applicability before placing an order rather than after the box arrives.

Workshops rebuilding a drive axle, replacing a hydraulic pump, servicing a mast lift cylinder or tracing a wiring fault in the control panel can identify the exact O-ring, seal, bearing, shim or connector they need from the exploded views. The fingertip valve section is particularly detailed, listing inlet, lift, tilt and auxiliary sections separately with their individual springs, poppets, spools and seal kits.

Delivery

IMAGES PREVIEW

The Doosan B10R-5 B13R-5 B15R-5 B16R-5 parts book is supplied as an instant PDF download. There is no shipping, no waiting for a disc and no customs delay. Once payment is complete the file is available immediately and can be opened on a workshop PC, a laptop, a tablet or a phone. Individual figure pages can be printed and taken to the machine or the parts counter, which makes it practical for day-to-day use in a service environment. Keep it on file and the correct part number for any B10R-5, B13R-5, B15R-5 or B16R-5 assembly is always within reach.