Doosan G20NXP-G35NXP Forklift Parts Manual SB1801E – Kubota WG2503 LP-NC / LP-T3 / DF-NC

Description

This Doosan G20NXP-G35NXP Forklift Parts Manual SB1801E is the complete illustrated parts book for the Doosan G20NXP, G25NXP, G30NXP, G33NXP and G35NXP counterbalance lift trucks, covering the Kubota WG2503 engine in LP-NC, LP-T3 and DF-NC fuel configurations. Every serviceable component in the book is listed with its Doosan part number, part name and required quantity, and each assembly is supported by a labelled illustration so the correct item can be identified the first time. The parts book carries the factory document code SB1801E and is organised into assembly groups spanning the chassis, driving module, engine, operating module, mast, fork and carriage.

File Details

• Manual type: Illustrated Parts Book (Parts Catalog)
• Brand: Doosan
• Lift truck models: G20NXP, G25NXP, G30NXP, G33NXP, G35NXP
• Model codes: FGA24, FGA25, FGA26, FGA27, FGA28
• Engine: Kubota WG2503
• Fuel configurations: LP-NC, LP-T3, DF-NC (dual fuel)
• Document number: SB1801E
• Language: English
• File format: PDF
• Page count: approximately 685 pages

Chapters and Sections Covered

The Doosan G20NXP-G35NXP parts manual is divided into the following top-level groups, each with its own set of illustrated assemblies:

• Chassis > Chassis: Arrangement General (NON-CERT LP, TIER-3 LP, NON-CERT DF), Frame Group, Mount Group (Gear Pump), Battery Group, Wiring Group, Pedal Group (Accel), Lines GP Fuel, Overhead Guard, Muffler GP, Floor Plate GP, Panel Top GP
• Chassis > Driving Module: Powertrain MTG, Axle ASSY (Drive), Steer Axle GP, Counter Weight (2.0T / 3.5T), Tire and Wheel Groups (pneumatic, solid, non-marking, ZX, single and double), Transmission ASSY G30NXP, Housing Sub ASSY, Clutch ASSY, Differential ASSY, Pump Transmission, Valve Control Transmission, Brake Group Parking
• Chassis > Engine: Engine Arrangement Primary (LP-NC, LP-T3, DF-NC), Engine Assy, ECU, Muffler Group, Intake Manifold, Oil Pan, Cylinder Head Assy, Governor Assy, Flywheel Assy, Camshaft and Idle Gear Shaft, Piston Kits and Crankshaft, Crank Case, Main Bearing Case, Gear Case, Cover Assy, Head Cover, Oil Pump, Oil Cooler, Water Pump, Water Flange and Thermostat, Alternator and Pulley, Starter, Ignition, Exhaust Manifold, Gasket Kits, Wire Groups, Accessories and Service Parts, Diagnostic Tool Kits
• Chassis > Operating Module: Air Cleaner GP (dry and wet), Air Conditioner, Autoshift Controller, Belly Plate, Cabin Groups (Modular A/B/C), LP Tank Mount Groups (EU and non-EU, S/D and S/O), Electric Wiring, Seat options (vinyl, cloth, suspension, hip restraint, arm rest), Strobe options, Valve Control GP (3 and 4 section, 3 and 4 lever), Vertical Exhaust, Wiper GP, Water Injection, Heater Group, Radiator Group, Rear Lamp GPs, Rear Grip Bar, Reservoir Assy
• Front End > Mast: Cylinder ASSY Tilt (6/4, 6/6, 6/10, 6/12, 8/4, 8/6, 8/10 in 2.0-3.0T and 3.3-3.5T), Mast Arrangements (STD 2500 through STD 5000, FFL 2560, FFL 2930, FFL 3210, FFL 3580, FFT 3880 through FFT 6170), Mount Groups, Relay ASSY Lift, Attachment Line Groups (3-way and 4-way, primary and secondary)
• Front End > Fork: Fork sizes (45x100x900 up to 50x100x2000), Positioner Fork, Positioner Groups for FFL and FFT 3.0T
• Front End > Carriage: Backrest ASSY, Carriage Arrangements (FFL and FFT, single and dual tire), Side Shifter (standard for single and double), Integral Side Shifter, Shifting Fork Integral, Load Backrest, S/S Line Group, Mount Group Carriage
• SQ > SQ-Chassis: Strap and SQ-Strip Ground
• Miscellaneous > Location Chart: Location Chart
• Part Number Index: Alphabetical and numerical index of every part number referenced in the book

What This Parts Book Gives a Technician

Because this is a parts book rather than a workshop manual, it does not print torque values or diagnostic flow charts – what it does provide is something a service manual cannot: the exact part number to order for every replaceable item on the truck. Each assembly – from the tilt cylinder seal kit to the transmission housing, from the battery tray to the modular cabin bracket – is exploded into its individual serviceable parts with a callout number that links straight back to the parts list. Indented part names indicate a sub-component of the item above it, so the correct level of assembly can be identified before a single part is ordered.

The Doosan G20NXP-G35NXP parts manual is grouped by system, which means you can go straight to the relevant section rather than hunting through a single alphabetical list. Need a counterweight bolt for a 3.5T truck? It is under Chassis > Driving Module > Counter Weight, 3.5T. Replacing the seat on a G25NXP? There are separate part numbers for the cloth suspension seat with hip restraint, the vinyl static seat, the sound-suspension NXP variant and the Crown arm rest seat, each with its own exploded view. The three fuel configurations (LP-NC, LP-T3 and DF-NC) each get their own arrangement pages at the top of the Chassis group, so you can confirm which variant your truck falls under before selecting the group that matches.

Models and Powertrain Coverage

The manual covers five lift truck models from the same NXP platform, with model codes FGA24 through FGA28. Three CV values are used to separate the fuel and emissions variants: 3510 for NON-CERT LP with the KBT WG2503 engine, 3520 for Tier-3 LP with the same engine, and 3530 for NON-CERT dual fuel (DF) with the KBT WG2503 engine. Front axle assemblies, counterweights (2.0T and 3.5T), tyre and wheel combinations (pneumatic, solid, non-marking, ZX, single and double) and transmission assemblies are each listed per model, so the same part can be matched against the exact configuration on your truck. The mast and carriage sections extend to full free lift (FFL) and full free triple (FFT) variants from 2560 mm up to 6170 mm, along with STD masts from 2500 mm to 5000 mm.

Why a Correct Parts Book Matters

Ordering a wrong part on a lift truck is expensive – both in return freight and in the downtime while the right one is sourced. This parts book removes that guesswork. Each entry shows the Doosan part number exactly as printed in the factory catalogue, the part name as used by Doosan, and the quantity required for that assembly. For assemblies made up of kits – seal kits, gasket kits, piston kits in STD, 0.2 mm and 0.4 mm oversize – the book shows the kit number and its contents, so you can order the kit rather than individual components when that is the more economical route.

IMAGES PREVIEW

Instant PDF Delivery

The Doosan G20NXP-G35NXP Forklift Parts Manual SB1801E is delivered as a PDF download the moment your order completes. There is no shipping, no waiting for a CD or a printed copy, and no restriction on how many times you open it. You can view it on a laptop in the workshop, on a tablet on the shop floor, or print just the pages you need for the job in front of you. Once the file is on your device it is yours to keep and reference for the life of the truck – which, for a parts book covering five models and three fuel variants, is exactly what a busy workshop needs.