Epiroc MT431 MT436 MT436LP Spare Parts Catalog PDF Download – Minetruck Parts Manual

Description

Epiroc MT431 / MT436 / MT436LP Spare Parts Catalog – Complete PDF Manual

This is the complete spare parts catalog for the Epiroc MT431, MT436, and MT436LP underground Minetrucks. Published as document 8997788000-002 for the Minetruck MT436B, this 633-page PDF gives you every part number, exploded view, and assembly reference needed to identify and order replacement components for these hard-working underground machines.

The catalog is organized by major assembly groups — from the mainframe and cabin through the engine, powertrain, hydraulics, and electrical systems — with each section presented as an exploded diagram followed by a detailed parts list. Every entry includes the item position number, Epiroc part number, description, quantity required, and where applicable, remarks and remanufactured part references.

File Details

• Manual Type: Spare Parts Catalog
• Brand: Epiroc
• Models Covered: MT431, MT436, MT436LP
• Language: English (with Russian table headers and page notations)
• Page Count: 633
• File Format: PDF
• Document Reference: 8997788000-002 Minetruck MT436B

Chapters Covered

• Service Kits & PM Kits
• Mainframe
• Cabin & Operator Station
• Power Unit – Engine & Cooling
• Powertrain – Axles & Driveline
• Brake System – SAHR Brake
• Transmission & Converter
• Hydraulic System
• Dump System
• Steering System
• Electrical Equipment
• Lighting & Safety Equipment
• Fire Suppression & Lubrication
• Label Sets & Decals

Service Kits & PM Kits

The opening sections cover the scheduled maintenance kits for MT431 and MT436 models. The 100/125-hour service kit and the 200/250-hour PM kit are broken down with every filter element, fuel-water separator, air filter, oil filter, and belt included in each kit. Part numbers and quantities are given for each item, along with the engine oil filter and secondary fuel filter references. These sections make it straightforward to order the correct service kit for the interval you’re working to.

Mainframe

The mainframe chapter covers the structural and mounting components that form the backbone of the machine. This includes the binder box for the operator manual, fenders with retainers and mounting hardware, sound suppression panels, the heaped dump box (16m³ at 2.0 t/m³), trunnion anchor assembly, complete air conditioner installation, driver’s seat with suspension base, swivel and swivel lock installations, driving mirrors, engine filter sets, and the powerframe assembly. Each component group is shown in exploded view with all screws, washers, nuts, and mounting plates listed.

Cabin & Operator Station

This extensive section details the complete operator cabin and all its subsystems. Starting with the cabin structure itself — side plates, rear plate, top plate, front plate, floor, firewall, access doors, windows with rubber mouldings, and welded hinges — the catalog then moves through the wiper assemblies (front and side), door locks and latch assemblies, door stops, rear-view mirrors, exhaust guards and connections, ladder installation, grab handles, and the fuel tank with anti-siphon attachment. The hydraulic oil tank section includes the tank weldment, filter weldment, hydraulic suction filter, cap assembly, gas valve, and breather filters. The loadframe, chassis weldment, trunnion assembly, and swivel lock installation are also covered in detail.

Power Unit – Engine & Cooling

The power unit chapter begins with the engine assembly — the Detroit Series 60 rated at 375/400HP Tier II — and then covers every supporting system. The air inlet section includes the intake installation, air filter with primary and secondary elements, restriction indicator, and all mounting brackets and clamps. The exhaust system is broken down into purifier, silencer, gaskets, tubes, clamps, and the turbo guard installation. Fuel system components include the water separator, fuel filters, fuel lines, and the engine oil remote drain with its hose assembly and fittings. The engine cooling section covers radiator tubes and hoses, drain valves, clamps, and the radiator unit itself (V-core, no epoxy). The brake cooling hydraulic system is also detailed here, with the cooler, pilot pressure valve, junction block, filter, and all associated hoses and tubes.

Powertrain – Axles & Driveline

The powertrain chapter covers the front axle installation with its shaft, hanger weldment, cross beam, crossmember, bushings, and wearing rings. The rear axle attachment includes the shaft, mounts, and mounting hardware. The axle specification for the MT-433 STD diff is fully broken down — housing, plugs, air breather, shafts, pistons, springs, bearings, seals, differential gear, planetary carriers, gear rings, and wheel bolts are all listed with their part numbers. The driveline section covers the driveline installation (MT431B, 436B), individual driveline assemblies (8.5C), universal joints, shaft seals, relief valves, support bearings, and the driveline guard assembly.

Brake System – SAHR Brake

The SAHR (Spring Applied Hydraulic Release) brake system is covered in its own detailed chapter. Components include the brake adjuster control installation, brake release valve with adapter, shuttle valve, accumulator (2.5 gallon), hand pump, tandem gear pump, check valve, junction blocks, pressure gauge, and all hydraulic fittings and hoses. The hose set for the hydraulic/brake system and the hose set for the 2030 slangsats are listed with their complete part numbers. The accumulator section details the piston accumulator (9.5 liter, 250 bar) with its seal kit and internal components. The tandem pump, filter assembly, high-pressure filter, and accumulator charge valve block are each broken down into their individual parts.

Transmission & Converter

This chapter covers the complete transmission assembly and its internal components. The transmission unit itself is listed along with the control valve, transmission parts, input shaft, forward shaft, 1st/3rd & 2nd/4th shaft, speed sensor, output shaft, transmission case assembly, idler shaft, clutch, and the coupling groups for 1st & 2nd clutches and forward/reverse 3rd-4th clutch. The converter section covers the converter installation with flex plate, converter specification CL8612-86, hydraulic pump, and regulating valve assembly. All bearings, seals, pistons, rings, and gears are listed with their part numbers and quantities.

Hydraulic System

The hydraulic system chapter is divided into several sub-sections. The control device for the dump system includes the dump pilot control valve, valve box, labels, and mounting hardware. The dump cylinder installation covers the cylinder assembly (MT-4XX) with barrel, packing gland, seals, wear rings, O-rings, backup rings, and wiper rings. The steering cylinder installation includes the steer cylinder with piston, cover, rod seal, guide rings, and bearings. The wheel steering system section details the flow amplifier valve, check valve, tandem gear pump, steering manifold, and all hoses and fittings. The hydraulic transmission system covers the transmission cooler, check valve with fixed orifice, filter housing, spin-on hydraulic filter, and the complete hose set for the transmission.

Dump System

The dump system chapter covers the complete hydraulic circuit for the dump function. This includes the dump system plumbing, attachment sets with spacers, tube clamps, and mounting hardware, the VA35-P/O 4-position valve with float, relief valves, seal kits, and the hydraulic system plumbing with all tubes, hoses, flanges, and fittings. The dump cylinder assembly is also detailed here with its repair kit and individual seal components.

Steering System

Covering the wheel steering system, this section includes the steering wheel set with hand wheel bracket, steering column, steering wheel, spinner, and steering control valve. The flow amplifier valve is broken down with its check valve, springs, end covers, relief valve, and internal restrictions. The tandem gear pump for the steering system is also detailed with its end pieces, housings, gear shaft sets, and seal kit.

Electrical Equipment

The electrical equipment chapter is one of the largest in the catalog. It covers the throttle installation with electronic accelerator pedal, steering wheel set, gear control with electronic shift and shifter assembly (including the Clark shifter with its caps, sockets, covers, bearings, wheels, switches, and seals), the system wiring with cable harnesses C1, C2, C3, and C4, the control box installation and assembly with transducers (0-600 PSI, 0-150 PSI, 0-3000 PSI), pressure switches (1400 PSI, 60 PSI), coupling ring tie point assembly, ISO switch, harness for rear lights, red and black 2/0 cables, temperature switch (210°F), start fuse installation, fuse holder for starter fuse, solenoid valve assembly (24V), and fuel filter extension wiring. The alternator section covers the alternator installation (DDC low-Niehoff 100A) and the alternator itself (24V/140A) with bearing kit, regulator, pulley, and internal components.

Lighting & Safety Equipment

This section covers the light installation with headlights, rear light box, reverse alarm (smart alarm with DT04-2P connector), brake/tail/turn lights (with DT04-4P connector), side light set (LED), and the cable for side light installation. The horn installation is also included. The battery module section details the battery box, battery frame, batteries (CCA 1200A, 210AH), and mounting hardware. The switch panel section covers the instrument panel for LU/retarder, operator panel, switch panel, panel assemblies, and instrument lighting for gauges (24V). The electric shift section covers the electric shift box with lockup, control manifold (MT436), accumulator (spring), lock-up valve assembly, and lock-up & modulator assembly. Also included are the video set for monitor installation (436 canopy), cab wiring (A/C, FS), electric set for wiper, and remote control with cable set for remote monitoring.

Fire Suppression & Lubrication

The fire suppression section covers the fire extinguisher installation (6kg x2), the complete fire suppression system with hose set, cable set, Ansul system (extinguisher & bracket LTA101-30), tank with attachment, pressure switch, and all mounting hardware and nozzles. The lubrication system section details the Lincoln lube system (24V, timer), hydraulic divider block assembly (4 station), and grease pump (24VDC).

Label Sets & Decals

The label set chapter provides the complete labeling for the MT431B/436B, including product graphics, safety labels, warning signs, information labels, and the MT436B CE label installation. The CE label set includes all required safety and instruction decals for the European market, covering warnings for moving parts, hot surfaces, pressure splash, no step, no smoking, and mandatory actions like brake release and tow hook procedures.

Put the Right Part Number on Every Order

An underground mining truck doesn’t stop for guesswork. When a hydraulic hose fails, a seal starts weeping, or a filter is due, you need the correct part number immediately — not after a call to the dealer and a wait for a quote. This Epiroc MT431 MT436 MT436LP spare parts catalog puts the complete parts database for these machines in your hands. Every exploded view shows how components fit together; every parts list gives the exact Epiroc part number, the quantity required, and the hardware needed to complete the job.

Whether you’re maintaining a fleet of MT431B and MT436B trucks or keeping a single MT436LP running, this catalog covers the systems you’ll work on: engine and cooling, transmission and converter, axles and driveline, brakes and hydraulic cooling, steering and dump hydraulics, cab and operator station, electrical and lighting, fire suppression and lubrication. The correct part numbers mean fewer returns, less downtime, and more confidence in every repair.

IMAGES PREVIEW

Instant PDF Delivery – Any Device, Anywhere

Your Epiroc Minetruck spare parts catalog is delivered as an instant PDF download. No shipping, no waiting, no physical media to lose. The file works on any device — laptop in the office, tablet in the workshop, or smartphone in the field. Search for part numbers, zoom into exploded views, and print only the pages you need for the job at hand. The complete 633-page catalog is available immediately after checkout.