Epiroc Scooptram ST2G Spare Parts Catalog 8997691000-001 – Illustrated Parts PDF

Description

This Epiroc Scooptram ST2G spare parts catalog, document number 8997691000-001, is the illustrated parts reference for the ST2G underground loader. Every assembly is broken down to component level with item callouts, Epiroc part numbers, part descriptions and quantities, so a component can be identified directly from the drawing instead of guessed from a photo, a measurement or a phone call to the dealer.

File Details

• Manual type: Illustrated spare parts catalog
• Brand: Epiroc
• Model: Scooptram ST2G and ST2G MKII
• Document number: 8997691000-001
• Engine reference: Cummins QSB 4.5 Tier 3 / Tier III
• Language: Spanish part names with English remarks
• File format: PDF
• Page count: 536 pages

Chapters Covered

• Kits MP – ST2G 250HRS QSB4.5 TIER3
• Kits MP – ST2G 500HRS QSB4.5 TIER3
• Kits MP – ST2G 1000HRS QSB4.5 TIER3
• Kits MP – ST2G 1000HRS TOTAL QSB4.5 TIER3
• Bastidor Motor – ST2G-Repower Conf Powerframe
• Bastidor Motor – Powerframe ST2G MKII
• Subbastidor
• Soporte de Eje – OSC Axle Support Assy, Front
• Soporte de Eje – Rear OSC Axle Mount
• Prot Salpicadur – Fender / Bolt-On Parts Inst-ST2G
• Capo – Engine Hoods Installation
• Cierre Articul – Swivel Lock Inst
• Depos.-Combusti – Installation Fuel Tank
• Depos.-Combusti – Tank Complete Assy
• Deposito Hidra – Tank Inst-Hydraulic, ST2D/G
• Filtro – Filter Assy – Hydraulic Suction
• Valvula – Valve-Relief
• Cubierta – Hyd Cap Assy
• Bastidor Carga – ST2G Loadframe Config
• Bastidor Carga – Loadframe Complete
• Inst. D. Pabellon – Canopy Inst
• Mat. Insonorizac – Sound Suppression-ROPS/FOPS
• Caja – Box Inst-Oper Manual
• Sistema de Braz – Boom Installation
• Soporte de Braz – Boom Up-Lock Support Inst-ST2G
• Articulacion – Stab Link Inst-Cyl to Bucket
• Union Giratoria – Swivel Inst-Midship Hinge
• Protector Cilin – Cylind Guard Inst-Stab Cyl Rod
• Cucharon – Bucket Installation 1.9M3
• Cucharon – Bucket 1.9M3, 2.0T/M3
• Instalacion – Seat Installation
• Motor Diesel – Cummins QSB 4.5 Tier III
• Unidad Motor – Engine Module Tier 3
• Lista Mangueras
• Boma de Engran – Gear Pump Inst.
• Sistema Enfriado – Engine Cooling ST2G Tier 3
• Radiador – Radiator ST2G Tier III
• Ins. Filt. Aire – Air Filter Installation
• Silenciad Comp – Exhaust Assy
• Catalizador – Purifier Weldmt.-7DZ
• Protectermica – Heat Shield Exhaust QSB 4,5
• Sist.-Combustib – Filter Installation
• Filtro Compl – Fuel Filter w/ Heater
• Eje Delantero – Axle Inst-Frt, 14D, N/S, PosiStop
• Eje de Rueda – Axle Spec Front w/SAHR Brakes
• Jaula Portasate – Carrier-Planet
• Freno – Brake Multi-Disc
• Caja Diferencial – Diff & Carrier Assy
• Eje Trasero – Rear Axle, 14D, STD, PosiStop
• Eje de Rueda – Rear Axle SAHR Brakes
• Linea de Accion – ST2G/D Driveline
• Prot Linea Acci – Driveline Guard Inst ST2G Tier
• Transmission – Transmission Inst
• Varilla Medidor – Dipstick Inst-Trans Oil Level
• Inst Mont Rueda – Michelin XMD2+ 12R24 TT
• Convertidor – Converter PA 13-15
• Palanca Vola. – Control Inst-Mono Strg w/Handl
• Cilindro Inst. – Hoist Cylinder Inst
• Cilindro – Stab Cylinder Inst
• Sist Subir Baja – D/H Hyd Inst
• Transmision Hid – Hydraulic Transmission
• Palanca-Cambio – Control-Trans Shift, no RRC
• Sistema Control – Monostick Steering Inst
• Sistema-Freno – Brake System
• Kit – Neutral Brake Apply Kit
• Sist Traccion – Tow Hook Inst ST2G Tier3
• Diagrama Electr – Electr. System
• Inst. Altern.
• Equipo de Ilum. – CE, Emergency Work Light
• Senal de Aviso – Alarm Inst-Audio/Visual
• Bateria Compl – Bat & Box Inst-24V(2)31H,M1013
• Inst Panel – Instrument Panel
• Alarma Hacia At – A/V Back-Up Alarm Instl.
• Sistema Ansul – Fire Supp System
• Extintor – 6KG
• Unidad Lubricac – Lube Power Unit Installation
• Juego Pegatina – ST2G MKII Warning Labels
• Juego Pegatina – ST2G MKII Marketing Labels

What makes this Epiroc Scooptram ST2G parts catalog useful is the depth behind each heading. The Powerframe and Loadframe sections carry every weldment, cover plate, gusset, hanger and bolster that ties the ST2G chassis together. The Cummins QSB 4.5 Tier 3 chapter walks the diesel through thermostat housing, water pump, drive belt, tensioner, injectors, sensors, ECU, turbocharger, secondary fuel filter, starting motor and the associated gaskets and o-rings. The cooling chapter covers radiator, surge tank, sight gauge, hoses, spring-loaded clamps and the protective hardware around the belt run. The axle chapters split front and rear into SAHR brake assemblies, carrier and planet groups, multi-disc brake packs, differential and carrier, hub, cone, cup, stud and seal components. The transmission and converter chapters go deep: forward/reverse shaft groups, low shaft, idler and fourth-speed clutch, output shaft group, control valve, modulator valve, charge pump, pump cover, drive plate kit, turbine shaft, stator and the companion flange. The hydraulic section covers the hoist cylinder, stab cylinder, steer cylinder, tandem pump, D/H control valve set, joystick controller, flow divider valve, monostick steering valve, oil cooler set and the full hose list. The brake system chapter lists the pedal brake valve, multi-disc brake parts, accumulator charge blocks, pilot pressure valve, high pressure filter, J-block and the neutral brake apply kit.

Beyond the Assembly Views

Because this is a parts book rather than a repair manual, the value sits in the drawings and their item lists. Each illustration carries a numbered callout that lines up with a table on the facing page showing part number, description and quantity. That layout is what allows a technician to hand a parts counter a number instead of a description, and it is what lets a maintenance planner build a stock list before a machine goes down. The electrical pages add the harness breakdown for harness #1, #3, #5, #7 and #11, the tow hook Deutsch harness, the neutral switch harness, the A/V alarm harness, the instrument panel contact blocks, relays, fuses, solenoid valve wiring and the ISO battery switch installation. The lubrication unit section covers the grease pump, divider blocks S1 and S2, and the full hose list for the lube circuit. Fastener sizes, thread pitches and grade callouts appear alongside the parts they hold, so the same page that identifies a bolt also tells you what grade it needs to be.

Why This Parts Catalog Pays for Itself

Whether the job is a worn bucket edge on a 1.9 m3 ST2G bucket, a leaking stab cylinder rod seal, a failed multi-disc brake pack, a cracked exhaust heat shield on a QSB 4.5, or a wiring fault somewhere in the driveline harness, the correct Epiroc part number is on these pages. Ordering the wrong part means a second freight bill, a second window in the maintenance bay and a second round of labour. Having the illustrated parts catalog for the Scooptram ST2G on hand means the right number the first time, and it means anyone on site can cross-check an assembly before a bolt comes out. It also gives a used-machine buyer a way to confirm what should be fitted to a specific ST2G or ST2G MKII before a purchase.

IMAGES PREVIEW

Delivery is instant. After checkout the PDF is available for download straight away, no shipping and no waiting on a disc. It opens on a laptop, tablet or phone in the workshop, and any page can be printed and taken under the machine. Keep a copy on the service laptop and the parts counter will never have to guess what you are asking for again.