Epiroc Simba S7 C Spare Parts Catalog 8999718600-001 PDF

Description

Epiroc Simba S7 C Spare Parts Catalog – PDF

This is the illustrated spare parts catalog for the Epiroc Simba S7 C underground drill rig, published under document number 8999718600-001. Spread across 1316 pages, it is a complete parts breakdown of the machine, built around exploded-view drawings that carry every callout number, part number and quantity you need to order or replace components correctly. Every illustration is tied to a tabular parts list on the following page, so a technician can read straight from the drawing to the order line.

File Details

• Manual type: Illustrated spare parts catalog
• Brand: Epiroc
• Model: Simba S7 C
• Document number: 8999718600-001
• File format: PDF
• Page count: 1316
• Language: English
• Engines referenced in maintenance kits: Deutz 914, Deutz BF4L 914, Deutz TD 3.6

Chapters Covered

• Rock Drill – COP 1838MUX+
• Extractor Group – Plug-In 52
• Front Part Comp
• Flush Head Comp – Plug-In 52
• Gear Housing GR
• Interm. Part GRP / Interm. Compl / Intermed. Part
• Cylinder Group / Cylinder – Complete / Cylinder, DR
• Seal House Comp – Front and Rear
• Back Head Group
• Hydraulic Motor – MSQ 160 SH
• Hydraulic Motor – MSYQ 250 SH
• Kit – Correction Kit
• Accumulator – Left / Right
• Return Accum.
• Label Set – COP 1838MUX+
• Protect Cap Set
• Optional Set – COP 1838MUX+
• Tools Set
• Pres. Gauge Set
• Fixture – Overhaul Fixture Attachment / Mounting Table
• Charging Device
• Connect. Plate – For Hydraulic Motor (O)MS(Q)
• O-Ring Set / O-Ring Set – Extractor Unit
• Seal Kit – COP 1838MUX+ / Seal Kit for Damping Piston
• Overhaul Kit – COP 1838MUX+ (600 and 1200 impact hours)
• Seal Kit – COP 1838MUX+/HUX+
• Overhaul Kit – Major Overhaul Extractor
• Conversion Kit – COP 1838(J)UX to COP 1838(J)UX+
• Conversion Kit – To Four Corners, Straight Splines
• Feed Module – Rod Handling RHS 10 / RHS 12
• Feed (beam, cradle, stinger, linear sensor, drill steel support)
• Boom Module – Basic Boom BUT 32 PD
• Boom Part, Boom Attachment, Boom Link, Cylinder Link
• Expanding Shafts and Telescope Set
• Hose Nipple Set – Boom / Hose Set – Extractor / Nipple Set
• Assembly Set
• Lubr. System – Auto Lubrication System
• Greasing Device (boom, feed, thread lubrication, ECL pump)
• Angle Ind.Compl (feed swing, feed lift, boom deflection, laser unit)
• Front Module – Front Frame
• Drive Unit – Front Module Wide
• Drive Axle – KA Controlled-C
• Crown Wheel Kit / Diff. Kit / Vane Kit / Planet Gear Kit / Brake
• Cardan Shaft / Counterweight / Stage / Mudguard
• Box – Drill Bit Box
• Electr. Syst. 24V – Front Module
• Hydr System – Front Module (drill valve block, direction valves, flow control)
• Hydr System – Front Mod / Opt. Extractor
• Hydraulic Set – Control Valves (Y156)
• Air/Water System – Front Mod. GAR30IA/EW
• Air/Water Set – Front Module
• Cleaning Unit / Boot Washer
• Set of Wheels – Nokian 9.00-20, Offset -25
• Support Leg Kit (BSJ 10-40)
• Steer.Cyl.Set
• Man.Grease Syst – Front Module / Middle Module
• Sign Set – Front Module / Middle Module / Power Module / Rear Module
• System Kit RCS – Boom Frame / Power Frame / Cabin Platform / LTE-CERTIQ
• Cable Set RCS – CAN/24V, Boom Frame, Watermist, Area Guard, Extractor, Windshield Wiper, WLAN
• Cabin Kit / Cab Attachment – ROPS
• Hoods Complet (with and without hose reel)
• Electr. Syst. 24V – Cabin (panel, junction boxes, wipers, ignition, warning lights, radio)
• Stair Lighting / Headlight Set LED / Spotlight Set / Lamp Attachment
• Emerg.Set (A48 junction box, emergency push buttons)
• Hydr System – Cabin Module (brake valve, guide unit, accumulators)
• Air/Water System – Plat/Cab Mod GAR30 IA/EW (ECL pump, reservoir)
• Chair Compl. / Chair Swing / Chair
• Air Conditioner – VAC S1 D MK4 (condenser, filter, compressor, gear motor)
• Laser / Laser Unit (boom alignment)
• Protection Grid / Windscreen Wash
• Display Kit – Cabin Kit / Monitor Reverse Camera
• Accel.Pedal
• Warning Label – Laser Beam Information
• Sensor Set – PIR Sensor
• Operator Unit – OP Modul 1 / Joysticks / Palm Grip
• Power Module – Mechanics 95KW
• Attachment – Power Unit RCS 5
• Electr. Syst. 24V (power frame)
• Electric Motor – 001 (95KW 380-420VD/690Y 50HZ)
• Hydr System – Power Module (valve block, oil cooler, reservoir, filters)
• Pump Set / Shaft Coupling / Hydraulic Pump / Gear Pump
• El.Oil Filler – Hyd. Oil Filling Pump
• Air/Water System – Power Module
• Middle Module – Mechanics MKIII
• Interm. Frame / Drive Unit / Drive Axle – Int. Drop Box
• Crown Wheel Kit / Planet Gear Kit / Drop Box / Trunnion / Assy.Piston
• Fuel System / Lubr. System / Battery Box / Protection (cable and hose)
• Hoods and Mudguards – Middle Module
• Electr. Syst. 24V – Middle Module (battery module, fuse kit, charger)
• Hydr System – Mid Module / WM (hydraulic pump, filter, motor, carrier pump, gear pump)
• Air/Water System – Mid.Mod GAR30 IA/EW
• Coupling Set – Midjetappar / Midjelas
• Diesel Eng. Unit – Turbo (engine, fan grid, coupling, drain, air filter, throttle, exhaust, cooling)
• Support Leg Kit – BSJ10-40 STD
• Lubr. Pump Kit – Auto Lubrication Boom & Feed
• Greasing Device – Thread Lubrication
• Hose Set – Basic Set
• Rear Module – Frame Rear / Boltec S
• Cable Steering / Protection for Valves / Cable Reel Kit / Collector Kit
• Hoods Complet – W/O Water Reel, MTap Protection
• Electr. Syst. 24V – Rear Module (A50 appar. panel, el-cabinet, doors)
• Electr. System R55/95*1 IEC 400-690V Y/D (A10 cabinet, main switch, plinth modules, cable sets, flanges)
• Reel Control – Cable, Dual Control / Control Box A57
• Emerg.Set – A41 push-button box
• Hydr System – Rear Modul / WM (direction valves, accumulators, restrictors)
• Hydr System – Watermist Option
• Air/Water System (strainer, water pump unit, compressor GAR 30, air receiver)
• Hose Nipple Set / Air Receiv.Set – Air Tank
• Camera Kit – Rear Module
• Label Set – Simba S7 D
• Software Kit – Underground Manager Pro
• Fire Suppr.Syst (AnsuL & Checkfire)
• Hose List – Fire Suppression Hoses
• Hose Connection (nipple and adapter tables)

What This Epiroc Simba S7 C Parts Catalog Delivers

A spare parts catalog lives or dies by how fast it lets you turn a broken component into the right order line, and this document is built exactly for that job. Every one of the modules above is drawn as an exploded assembly with numbered callouts, and the facing page lists the corresponding part number, description, quantity and any remarks or reference numbers. That structure repeats across the Rock Drill COP 1838MUX+, the feed beam and rod handling arms, the boom cylinders and expanding shafts, the front frame and drive axle, the hydraulic valve blocks, the RCS cable sets and the Deutz-powered middle module, so you are never left guessing which O-ring, seal kit, shim, nipple or bearing belongs to which position.

Beyond the assembly drawings, the catalog groups the machine’s wear and service parts into ready-made kit sections. You will find the seal kits for the rock drill, extractor unit and damping piston listed with their component O-rings and seal rings; the overhaul kits broken out by 600 and 1200 impact hour intervals; conversion kits for straight-spline and four-corner chuck arrangements; and PM kits for the Deutz 914, BF4L 914 and TD 3.6 engines along with the compressor and hydraulic tank breathers. Filter sets, hydraulic hose lists, fire suppression hose lists and the full hose-connection nipple table at the back let you cross-check fittings without having to measure or match threads by hand.

Who This PDF Is For

Underground mining workshops, drill rig service technicians, spare parts planners and rebuild shops working on the Simba S7 C will get the most value here. Because the catalog covers every module of the machine end-to-end – from the COP 1838MUX+ rock drill through the boom and feed to the middle module and the rear electrical cabinet – it works both as a rebuild reference and as a day-to-day parts counter tool. Maintenance planners can use the kit and overhaul listings to build up PM schedules; fitters can use the exploded views to confirm assembly order; and parts interpreters can use the part-number tables to raise orders without calling the dealer.

Why a Proper Parts Catalog Matters

Fitting the wrong O-ring, shim or seal kit on a rock drill or hydraulic valve block can take a rig out of production for far longer than the original fault. This Epiroc Simba S7 C spare parts catalog gives you the exact part number for the exact position on the exact assembly, so consumables, seals, bearings, valves and structural components are ordered once and fitted once. The seal and O-ring sets, restrictors, check valves and accumulator parts are all broken out by dimension and position, which makes cross-referencing straightforward when a rig is being rebuilt or when a component has been superseded.

Delivery

IMAGES PREVIEW

The Epiroc Simba S7 C Spare Parts Catalog is supplied as a downloadable PDF, delivered instantly after payment. There is no shipping, no waiting for a disc and no physical book to keep on the shelf. Open it on a workshop laptop, a tablet on the machine, or a phone in the parts store, and print the pages you need for the job at hand. Because the whole 1316-page catalog travels in one file, the entire machine’s parts breakdown stays with the rig wherever it goes.