Fendt 714 716 718 720 722 724 Vario Tractor Operator’s Manual – Operation Volume PDF

Description

Fendt 714 716 718 720 722 724 Vario Tractor Operator’s Manual – Operation Volume

This is the Operation Volume of the FENDT Operator’s Manual for the 714 Vario, 716 Vario, 718 Vario, 720 Vario, 722 Vario and 724 Vario tractors. It is the section of the manual that shows the operator how to run the machine: cab entry and exit, seat adjustment, display instruments, the multi-function armrest, the joystick, Vario transmission, PTO operation, four-wheel drive, differential lock, front axle suspension, hydraulics, electronic power lift control (EPC), the power lift, towing equipment, ballasting, lighting and additional implements. It is a working document for the operator rather than a repair manual – but it is the reference the whole FENDT 700 Vario family was delivered with.

File Details

• Manual type: Operator’s Manual – Operation Volume
• Brand: FENDT (AGCO GmbH, Marktoberdorf)
• Models covered: FENDT 714 Vario, 716 Vario, 718 Vario, 720 Vario, 722 Vario, 724 Vario
• Language: English
• Document number: 737.020.010.017
• File format: PDF

Chapters Covered

• 1. Safety Instructions
  • Introduction and intended use
  • Safety symbols and terms
  • Safety decals and instructions
  • General, start-up, operating and maintenance safety
  • Safety equipment and emergency exits
• 2. Operation
  • Operator’s seat and instructor seat (air-sprung deluxe, super deluxe, Evolution Dynamic)
  • Multi-function armrest and armrest keypad
  • Display instruments and operating controls – dashboards, instrument panel, multiple display
  • Steering wheel adjustment and VarioActive superimposed steering
  • Vario terminal, on-board computer, ISO implement control, SectionControl, Variotronic TI
  • Sockets, time setting, main electrical isolation switch
  • Heating and ventilation system, rear view mirrors
  • Start-up, cold weather operation, starting, stopping
  • Vario transmission, emergency mode, towing instructions
  • Fuel consumption measurement, Tractor Management System (TMS)
  • Rear PTO, flange PTO, front PTO and PTO clutch calibration
  • Compressed air system and compressed air trailer brake
  • Four-wheel drive, differential lock, front axle suspension
  • Power lift and PTO automatic mode
  • Brakes – foot brake, hand brake, hydraulic trailer brake, engine brake
  • Hydraulics – valve locking, valve settings, emergency operation, couplings
  • Rear electronic power lift control (EPC) and working with the EPC
  • Power lift – lower link hooks, lift links, top links, ball holder
  • Front power lift
  • Towing equipment – towing capacity calculation, hitches, ball-type coupling, Piton Fix, draw bars
  • Ballasting, track width adjustment, dual wheels, changing tyre size
• 3. Lighting
  • Headlights and rear lights, work lights, rotary beacons
  • Brake lights, direction indicators and sidelights
  • Additional lighting
• 4. Additional Implements
  • Camera connection and settings
  • Front loader consoles
• Alphabetical index

Across roughly 200 pages, this FENDT 714 716 718 720 722 724 Vario Operator’s Manual – Operation Volume covers the complete set of operating procedures and controls on this tractor family. Rather than scattering information across general 700-series literature, this manual is specific to the six Vario models listed and the operation volume alone – so cab layout, transmission behaviour, hitch controls, PTO selection, hydraulic valve colours, EPC settings, ballasting and towing figures all match the machine in front of the owner. Detailed content is included for every control, every adjustment point and every safety device, with step-by-step text tied to numbered diagrams throughout.

What This FENDT Vario Operator’s Manual Enables

Owners and operators of a FENDT 714 Vario, 716 Vario, 718 Vario, 720 Vario, 722 Vario or 724 Vario can use this manual to run the tractor correctly from day one. It covers how to enter and exit the cab safely, adjust the air-sprung operator’s seat, set up the multi-function armrest keypad, operate the joystick buttons, work the Vario transmission including emergency mode and towing, engage the rear, front and flange PTOs and calibrate their clutches, operate the four-wheel drive and differential lock, manage the front axle suspension, and use the heating and ventilation system including cool, defrost and automatic modes.

The hydraulics and electronic power lift sections are particularly detailed. Valve equipment is identified by colour (yellow, blue, red, green, brown, olive, grey) with matching caps on the rear and front connections; the manual explains how to lock all EHS valves, operate individual valves through the crossgate lever, linear module or joystick, activate emergency manual operation on the valve block, and warm the EHS valves in cold conditions. The EPC chapter covers the STOP safety switch, quick-lift switch, depth control, floating position, linkage drawbar lock and implement socket pin assignments. The power lift section then goes deeper with lower link hooks, height-adjustable lift links, mechanical and hydraulic lateral stabilisation, front and rear top links and the ball holder.

Towing equipment is treated in full: how to calculate permissible towing capacity from the D-value and tractor weight, the trailer hitch bracket, manual and automatic trailer hitches, ball-type coupling (K80 and height-adjustable), Piton Fix, drawbar with Piton Fix and standard drawbar – each with vertical load limits and type plate references. Ballasting covers front/rear ballast weights, wheel weights, water ballasting of tyres and the front weights used without the front power lift. Track width adjustment for the rear bar axle and dual wheels are also documented, along with resetting the speed display after a tyre size change.

Why the FENDT 714 716 718 720 722 724 Vario Operator’s Manual Matters

FENDT tractors are spec’d tightly around a serial range, and this FENDT 714 716 718 720 722 724 Vario Operator’s Manual – Operation Volume corresponds exactly to chassis numbers from 732..0101 through 737..0101. Using the correct operating instructions and adjustment values is what keeps the transmission, hydraulics, PTO clutches and brakes within the manufacturer’s parameters – and it is also how the operator avoids the situations that damage a Vario drivetrain, such as improper towing, wrong PTO speed selection or a mismatched hitch. Every procedure is presented with the same level of detail the FENDT factory workshops use, and the safety chapter is written to be read before the tractor is started for the first time.

IMAGES PREVIEW

Instant PDF Delivery

The manual is delivered as an instant PDF download immediately after payment – no shipping, no waiting. Read it in the cab on a tablet, print the relevant pages for the workshop, or keep the file on a phone. Searchable navigation via the table of contents and alphabetical index makes it quick to find the section you need while you are working. Buy once, keep it as long as you own the tractor.