Fendt Bale Wrapper Rollector 130 Operator’s Manual – PDF DOWNLOAD

Description

Fendt Bale Wrapper Rollector 130 Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Fendt Bale Wrapper Rollector 130 Operator’s Manual – PDF DOWNLOAD

1.2 Safety instructions

• YOU are responsible for the SAFE operation and maintenance of your machine.
• YOU must make sure that each person who operates or does work on the machine understands all the SAFETY data in this manual.
• YOU are the key to safety. Good safety procedures prevent accidents to you and each person near you.
• Make these procedures a set part of your safety sequence.
• Make sure that EVERYONE who operates, does maintenance or works near to the machine obeys the safety precautions.

Follow the safety sequence to prevent the risk of injury or death:

•  Owners must complete training with all operators before they operate the machine. This training must be done a minimum of each year
• The operator must read, understand and obey all safety and operation instructions in the manual
• A person who did not read and understand all safety and operation instructions must not operate the machine
• Do not change the equipment. Adjustments not approved by the manufacturer can change the function of the machine and cause damage or personal injury
• Only use approved replacement parts and make sure that only approved technicians do the repair procedures.

1.2.1 General safety

•  Read and understand the manual and all safety decals, before you operate the machine
• Follow all safety regulations, in this manual and instructions or warnings shown on the machine
• Only use the machine for its correct operation
• Only approved persons that understand the operator manual, can operate, drive and do maintenance on the machine
•  Keep persons and objects away from parts that move
• Make sure that the installation of all the safety guards and protection devices is correct and they operate correctly
• Always use a tractor with a cabin. Make sure that you close the cabin of the tractor during operation to decrease the quantity of sound. High quantity of sound can cause reduction in hearing
• Always keep a minimum distance of 3 m between the machine and electrical power lines
• Know the height of the machine
•  Put on the correct protective clothing and equipment (gloves, safety glasses and ear protectors)
• Look for hazards and signs of defects (leakage and noise)
•  Keep the safety decals clean to make sure that you can see them at all times. Replace safety decals that are missing or you cannot see
•  Know the telephone number for emergency medical help in your area
•  Speak to your approved local dealer, if you are not sure of one or more items
• Only connect the machine to the tractor using the procedures in this manual. Only connect the machine to a tractor trailer hitch with your local regulations approval
• Make sure that the front axle weight of the tractor is sufficient. Make sure that you do not have more weight than the maximum permitted on the rear axle
• Do not connect the machine to the tractor when the tractor engine is in operation
• Release the pressure from the hydraulic system before you connect or disconnect the hydraulic hoses. Refer to the manual of the tractor
• If the machine has a pneumatic or hydraulic brake, connect the brake hose(s) to the tractor
• Make sure that all safety guards and protection devices are in position
• Do not remove a blockage by hand or by foot. Always use an applicable tool.

TABLE OF CONTENTS:

Fendt Bale Wrapper Rollector 130 Operator’s Manual – PDF DOWNLOAD

1 Safety 7
11 Safety icons 9
12 Safety instructions 10
121 General safety 10
122 Safe driving 11
123 Safe driving on hillsides 11
124 Public road transport safety 11
125 Safe maintenance 11
126 Safe operation 12
127 Fire prevention 12
13 Safety decals 13
131 Examine and replace the safety decals and notices 16
14 Safety devices 18
141 Emergency stop button 18
142 Lock the transport wheel 18
143 Safety chain (optional) 18
144 Film knife cover 19
145 Cover for the chain drive 19
146 Lock the loader arm in position 19
147 Wheel chocks 20
148 Transport lock for bale end tipper 20
149 Bale end tipper 20
1410 Valve to lock wrapper table in maintenance position 21
2 Introduction 23
21 Preface 25
211 Manual Contents 25
212 Vehicle identification number (VIN) and VIN plate 25
22 Intended use 27
221 Correct use 27
222 Known Misuse 27
23 Descriptions 28
231 General operation 28
232 Drawbar 28
233 Device to Stop Use Without Approval 28
234 Hydraulic system 29
235 Wrapping table 29
236 Loading arm 29
237 Film cutter assembly 30
238 Stretch unit 30
239 Extension kit for 500mm film 31
2310 Suction cup 31
2311 Flow control valve 31
2312 Battery extension cable 32
2313 Foot plate 32
24 Controller 33
241 E-link basic controller 33
25 E-Link basic software 34
251 Function of the buttons 34
252 Interface structure 34
Table of contents
Bale Wrapper
4820FTEN01
2521 Start up screens 35
2522 Main menu 35
2523 Second calibration menu (CAL2) 35
2524 Third calibration menu (CAL3) 36
3 Operation 37
31 First use 39
311 Adjust the height of the drawbar pull eye 39
312 Adjust the film holder for other film roll sizes 39
313 Adjust the bale end-tipper 40
314 Adjust the bearings adjust plate 41
315 Adjust the film stretch 41
316 Adjust the film stretch 42
317 Program settings 42
32 Connect the machine to the tractor 44
321 Connect the machine to the tractor 44
322 Calculate the Maximum Permitted Vertical Load on the Coupling Point 45
33 Transport position and driving 47
331 Transport position of the bale end tipper (optional) 47
332 Transport position of the loader arm 47
333 Place or remove the wheel chocks 48
34 Prepare the machine to wrap 50
341 Move to the working position 50
342 Replace a film roll 51
35 Operate the machine 54
351 Before you operate the machine 54
3511 Start wrapping auto mode 54
3512 Start wrapping manual mode 55
352 Before you start to wrap 55
353 Drive on slopes 55
354 Shut down procedure on the field 56
36 Disconnect the machine from the tractor 57
361 Park the machine 57
362 Remove the pressure from the hydraulic system 57
363 Take the machine out of operation 58
4 Maintenance and lubrication 59
41 Prepare the machine to do maintenance 61
42 Preventative maintenance schedule 63
43 Lubrication chart 64
44 Lubricate the machine 65
441 Lubricate the wrapping table 66
442 Lubricate the gear wheels of the transmission 66
443 Lubricate the drive chain of the wrapping table rollers 67
45 Adjust the chain tension 69
46 Measure the oil pressure in the accumulator 71
47 Examine the Hydraulic Hoses for Damage and Leaks 72
48 Replace the film knife 73
49 Clean the machine 75
410 Torque the nuts of the transport wheel 76
5 Troubleshooting 77
51 Replace the transport wheel 79
52 The wrapping table turns too quickly 80
Table of contents
Bale Wrapper
4820FTEN01
6 Specifications 81
61 Dimensions 83
62 Specifications 85
63 Shipment 86
631 Lift the machine 86
632 Attach the machine to a truck 87
64 Disposal 88
7 Quick reference charts 89
71 Main menu 91
72 Second calibration menu (CAL2) 92
73 Third calibration menu (CAL3) 93
8 Index 95

IMAGES PREVIEW OF THE MANUAL:

FENDT BALE WRAPPER ROLLECTOR 130 OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M