FENDT EU Rubber Track Tractor 1149MT 1154MT 1159MT 1165MT Operator’s Manual – PDF DOWNLOAD

Description

FENDT EU Rubber Track Tractor 1149MT 1154MT 1159MT 1165MT Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

FENDT EU Rubber Track Tractor 1149MT 1154MT 1159MT 1165MT Operator’s Manual – PDF DOWNLOAD

1.1 Safety Information
1.1.1 Operator Manual

This operator manual uses the latest information available at the time of publication. Read the operator manual carefully before operating the machine. Right-hand and left-hand, as used in the operator manual, is determined by facing the direction that the machine travels when in use. Photos, illustrations, and data used in the operator manual were current at the time of publishing. Because of possible production changes, each machine can vary. Manufacturer reserves the right to redesign and change the machine as necessary without notification.

1.1.2 Safety symbol

The safety symbol tells you about a potentially hazardous area! Look for the safety symbol in this manual and on the machine. The safety symbols tell you that there is important safety instructions in the manual.

1.1.3 Safety messages

The words DANGER, WARNING or CAUTION are used with the safety symbol. Learn these safety messages and obey the recommended precautions and safety instructions.

DANGER:
If you do not obey the recommended
precautions and safety instructions,
DEATH OR INJURY will occur.
WARNING:
If you do not obey the recommended
precautions and safety instructions,
DEATH OR INJURY can occur.
CAUTION:
If you do not obey the recommended
precautions and safety instructions,
INJURY can possibly occur

1.1.6 Important safety information
IMPORTANT: Any Modifications to the machine or systems not authorized by AGCO will void the AGCO
Warranty This includes, but is not limited to hitches.
A. WARNING:
When replacement parts are required for this product, AGCO recommends using AGCO
replacement parts or parts with equivalent specifications including, but not limited to,
physical dimensions, type, strength and material. Failure to heed this warning can get
untimely failures, product damage, personal injury or death

• Failure to obey basic safety rules and precautions can cause personal injuries during product operation, maintenance, or repair. Know dangerous situations before an injury occurs. A person must be alert to possible dangers. This person must also have the necessary training, skills and tools to do these operations correctly. Incorrect operation, lubrication,
• maintenance or repair of this product can be dangerous and can result in injury or death. Read and understand all the information about the operation, lubrication, maintenance, and repair before operating on this machine. The product and this manual give safety precautions and warnings. Bodily injury or death can occur to you or to other persons if all warnings
• are not heeded. Not every possible circumstance that can involve a potential danger can be anticipated. The warnings in this publication and on the product are, thus, not all inclusive. If a tool or procedure, not recommended by AGCO, is used, make sure they are safe for everyone. An operator must make sure the product will not be dangerous or damaged by the
• operation, lubrication, maintenance or repair procedures selected. Information, specifications, and illustrations in this publication come from information available at the time of publication production. Specifications, torques, pressures, measurements, adjustments, illustrations, and other items can change at any time. These changes can change the service that is given to the product. Get the complete and most current information before starting a job. AGCO dealers have the most current information available

TABLE OF CONTENTS:

FENDT EU Rubber Track Tractor 1149MT 1154MT 1159MT 1165MT Operator’s Manual – PDF DOWNLOAD

1 Safety 13
1 1 Safety Information 15
1 1 1 Operator Manual 15
1 1 2 Safety symbol 15
1 1 3 Safety messages 15
1 1 4 Information messages 15
1 1 5 Safety signs 16
1 1 6 Important safety information 16
1 1 7 General hazard information 17
1 1 8 Pressurized air 18
1 1 9 Asbestos information 18
1 1 10 Electrical storm injury prevention 18
1 1 11 Mount and dismount the machine 18
1 1 12 Before you start the engine 19
1 1 13 Start the engine 19
1 1 14 Before operation 19
1 1 15 Procedures for operation 19
1 1 16 Park the machine 20
1 1 17 Operator station 20
1 1 18 Cut and crush prevention 21
1 1 19 Rollover protective structure 21
1 1 20 Burn prevention 22
1 1 21 Coolant 22
1 1 22 Oils 22
1 1 23 High pressure lines 22
1 1 24 Fluid penetration 23
1 1 25 Batteries 23
1 1 26 Exhaust fumes 24
1 1 27 Noise prevention 25
1 1 28 Fire and explosion prevention 25
1 1 29 Fire extinguisher 26
1 1 30 Public road transportation 26
1 2 Safety signs and labels 27
1 3 Engine safety signs 28
1 3 1 Engine oil filter 29
1 3 2 Belt routing 29
1 3 3 Informational – cab air conditioning 29
1 3 4 Separator filter 29
1 3 5 Fuel filter 30
1 3 6 Hot surface 30
1 3 7 High pressure hazard 30
1 3 8 Entanglement 31
1 3 9 Entanglement 31
1 3 10 Run over hazard 31
1 3 11 Fuel filter 31
1 3 12 Separator filter 32
1 3 13 Informational – engine air cleaner 32
1 3 14 Engine oil filter 32
1 3 15 Ether 32
1 3 16 Hot pressurized coolant 33
1 3 17 Engine oil sign 33
1 3 18 No step 33
Rubber Track Tractor
ACW3842930_ V02
Table of contents
1 4 Chassis safety signs 34
1 4 1 Engine cover support 35
1 4 2 Radiation hazard 35
1 4 3 Operators manual 35
1 4 4 Torque 35
1 4 5 Ultra low sulfur diesel fuel 36
1 4 6 Fall off hazard 36
1 4 7 Pinch hazard 36
1 4 8 Tiedown 36
1 4 9 Lift 37
1 4 10 Rear rollover 37
1 4 11 Crush warning 37
1 4 12 Power take off 37
1 4 13 Transmission oil fill 38
1 4 14 Torque 38
1 4 15 Torque 38
1 4 16 No step 38
1 5 Cab safety signs 39
1 5 1 Run-over hazard 40
1 5 2 Roll-over hazard 40
1 5 3 Bystander notification 40
1 5 4 Operators manual 40
1 5 5 Park brake 41
1 5 6 Installation date 41
1 5 7 Alternate exit 41
1 6 Hydraulic safety signs 42
1 6 1 High pressure hazard 43
1 6 2 High pressure fluid 43
1 6 3 Hydraulic couplers 43
1 6 4 Hydraulic oil filter 43
1 6 5 Oil level 44
1 7 Electrical safety signs 45
1 7 1 Rear terminal mini fuse relay 46
1 7 2 Fuse/ relays 46
1 7 3 Electrical hazard 46
1 7 4 Battery explosion 46
1 7 5 12 volt 47
1 7 6 Electrical ground 47
1 7 7 Wire access 47
1 7 8 Battery shut off 47
2 Introduction 49
2 1 Machine identification information 51
2 2 Serial number definition 53
2 3 Intended use 54
2 4 Proper disposal of waste 55
2 5 Pre-Delivery 56
2 5 1 Pre-delivery checklist 56
2 6 EC -Declaration of Conformity 57
3 Operation 59
3 1 General inspection 65
3 1 1 Walk-around inspection 65
3 2 Start the engine 67
3 2 1 Pre-start checks 67
3 2 2 Start the engine 67
Rubber Track Tractor
ACW3842930_ V02
rra~: •n•11 – Table
of contents
3 2 3 Start the engine in normal conditions 67
3 2 4 Start the engine with jumper cables 68
3 3 Engine start switch 69
3 4 Monitor mounting bar 70
3 5 Lamp switches 71
3 5 1 Multifunction light switch on the steering column 71
3 5 2 Extremity lamps 72
3 5 3 Interior lamps 72
3 5 4 Courtesy lamp 72
3 5 5 Cab switches 73
3 5 6 Exterior courtesy lamps 74
3 5 7 Lighting shutdown delay 74
3 5 8 Rotating beacon 75
3 5 9 Backlighting for switches in the cab 75
3 6 Dash panel 76
3 7 Steering wheel 79
3 7 1 Horn 79
3 7 2 Steering wheel tilt lever 79
3 8 Mirrors 80
3 8 1 Inside rear view mirror 80
3 8 2 Outside rear view mirrors 80
3 9 Radio 81
3 9 1 Steering wheel controls 81
3 9 2 Blue tooth microphone 81
3 10 Windows 82
3 10 1 Window sun screen 82
3 10 2 Open the rear window 82
3 10 3 Window washer compartment 82
3 10 4 Rear window as an alternate exit 83
3 10 5 Exit the cab in an emergency 83
3 11 Storage and literature compartments 84
3 12 Operator seat 85
3 12 1 Armrest adjustment 85
3 12 2 Standard operator seat 85
3 12 3 Heated and ventilated seats 87
3 12 4 Deluxe heated – vented seat 88
3 12 5 Instructor seat 89
3 12 6 Seat belts 90
3 12 7 Operator presence functionality 90
3 13 Exterior tool box 91
3 14 Heating and air conditioning controls 92
3 14 1 Automatic temperature controls 92
3 14 2 Manual temperature control system 93
3 15 Vent locations 94
3 16 Machine management center 95
3 16 1 Terminal 95
3 16 2 Machine management center version information 96
3 16 3 Set the measurement units 96
3 16 4 Set the language 98
3 16 5 Set the decimal display 99
3 16 6 Set the time and date 99
3 16 7 Terminal settings 100
3 16 8 Applications 102
3 16 9 Select an auxiliary input 103
3 16 10 View the screens 104
Rubber Track Tractor
ACW3842930_ V02
Table of contents
3 16 11 Engine 104
3 16 12 Transmission 105
3 16 13 Hydraulic 106
3 16 14 Powertrain protection software (PPS) 107
3 16 15 Measure INST (instantaneous) 108
3 16 16 Measures – field 108
3 16 17 Measures – fuel 109
3 16 18 Memory 109
3 16 19 Power management 112
3 16 20 Tractor settings 113
3 16 21 Slip alarm 114
3 16 22 ISO 11783 Class 3 116
3 16 23 Service intervals 117
3 16 24 Headland management 121
3 16 25 Headland management icon identification 124
3 16 26 DTC (diagnostic trouble codes) stored or active 126
3 16 27 Track tension 127
3 16 28 3-point linkage 128
3 16 29 Slip calibration 130
3 16 30 Steering calibration 132
3 16 31 Inching pedal calibration 134
3 16 32 Radar calibration 135
3 16 33 Enable the video camera – software version 3 2 and before 137
3 17 Air system operation 139
3 17 1 Air system operation 139
3 17 2 Air trailer brake couplers 139
3 17 3 Air hose connection 140
3 18 Machine control 141
3 18 1 Throttle control 141
3 18 2 Decelerator- if equipped 141
3 18 3 Power management 141
3 18 4 Brake control 142
3 18 4 1 Service brakes 142
3 18 5 Hydraulic trailer brake if equipped 143
3 18 6 Park brake 143
3 18 7 Manual parking brake handle 144
3 19 Overweight protection strategy (OWPS) 145
3 20 Inching pedal control 146
3 21 Transmission 147
3 21 1 Transmission control 147
3 21 2 Machine ground speeds 147
3 21 3 Transmission control lever 148
3 21 4 Transmission shifting diagram 148
3 21 5 Preselect a gear before you move 148
3 21 6 Use of the inching clutch control 149
3 21 7 Operate the shuttle shift 149
3 21 8 Speed match 150
3 22 Hydraulic controls 151
3 22 1 Hydraulic control valve operation 151
3 22 2 Reading lockout switch for the hydraulic control levers 153
3 23 General hydraulic connections 154
3 23 1 General hydraulic connections 154
3 23 2 Connect hoses to the quick couplers 154
3 23 3 Disconnect hoses from the quick couplers 155
3 23 4 Hydraulic flow management 155
3 23 5 Hydraulic motors 155
3 23 6 Selection of hydraulic motors 155
Rubber Track Tractor
ACW3842930_ V02
rra~: •n•11 – Table
of contents
3 23 7 Single acting cylinders 156
3 23 8 Connect a double acting cylinder 156
3 23 9 Connect hydraulic motors to the control valves 156
3 23 10 Connect a grain cart with an auger motor 157
3 23 11 Semi – mounted vacuum planter with the lift assist wheels 158
3 23 12 Connect the vacuum planter 159
3 23 13 Connect the air seeder or the grain drill 159
3 23 14 Connect the spray system pump 161
3 23 15 Connect the auxiliary implement controls 161
3 23 16 Hydraulic power beyond 162
3 23 17 Connect a hydraulic motor to power beyond 162
3 23 18 Connect the auxiliary implement control valve with load sense 163
3 23 19 Connect the auxiliary implement control valve without load sense 163
3 23 20 Auxiliary implement control valve bank 163
3 23 21 Connect the hydraulic motor with the flow control valve 164
3 24 Electrical system 165
3 24 1 Radar unit 165
3 24 2 Radar connector 165
3 24 3 Battery disconnect switch 166
3 24 4 Single pole connectors 166
3 24 5 Auxiliary power switch 166
3 24 6 Trailer connector 167
3 24 7 Put the implement cable into the cab 167
3 24 8 ISO 11783 connector 167
3 25 3-point linkage 169
3 25 1 Console controls 169
3 25 2 3-point linkage 169
3 25 3 Adjust the 3-point linkage control lever 169
3 25 4 Draft control 170
3 25 5 Slip sensitivity 171
3 25 6 Raise/lower switch for the 3-point linkage 172
3 25 7 Use the external raise lower switch 172
3 25 8 Level the implement 173
3 25 9 Adjust the top link 173
3 25 10 Adjust the draft arm 173
3 25 11 Lift linkages and quick hitch 174
3 25 12 Adjust the lift links 175
3 25 13 Replace the rubber stops on the wide swing drawbar 176
3 25 14 Replace the wear plates and the rubber stops on the standard drawbar 176
3 26 Steerable 3-point linkage 177
3 26 1 Steerable hitch functionality 177
3 27 Capture the steerable 3-point linkage 179
3 28 3-point linkage lift assist 180
3 29 Connect the implements 181
3 29 1 Connect the implements to the 3-point linkage 181
3 29 2 Connect the implements to the quick hitch 181
3 30 Disconnect the implements 182
3 30 1 3-point hitch implements 182
3 30 2 Quick Hitch implements 182
3 31 Drawbar 183
3 31 1 Category three pin with adapter plate for category four drawbar 183
3 31 2 Category four pin with adapter plate for the category five drawbar 183
3 31 3 Drawbar 183
3 31 4 Connect drawbar implements 184
3 31 5 Wide swing drawbar 185
3 31 6 Controlled drawbar 185
3 31 7 Connect category four drawbar implements 186
Rubber Track Tractor
ACW3842930_ V02
Table of contents
3 31 8 Connect category five drawbar implements 186
3 31 9 Adjust the wide swing drawbar support 187
3 31 10 Safety chain 188
3 31 11 Implement hook up 188
3 32 Power take off (PTO) 189
3 32 1 Operate the power take-off 189
3 32 2 Power take-off shaft 190
3 32 3 Connect the power take-off implements 190
3 33 Tow and transport 191
3 33 1 Operate the machine on the road 191
3 33 2 Operate on the road with a 3-point linkage mounted implement 192
3 33 3 High speed road operation 192
3 33 4 Basic towing 192
3 33 5 Tow a stuck machine 193
3 33 6 Tow a machine with a dead engine 193
3 33 7 Accumulator without pressure 194
3 33 8 Transport the machine 195
3 34 Performance recommendations 196
3 34 1 Machine performance 196
3 35 Tracks 197
3 35 1 Track selection 197
3 35 2 Low profile tracks 197
3 35 3 General ag tracks 197
3 35 4 Extreme application tracks 197
3 36 Debris deflectors 199
3 37 Machine ballast 201
3 37 1 Levels of ballast 202
3 37 2 Add weights 203
3 37 3 Maximum machine weight 203
3 38 Weights 205
3 38 1 Combinations of idler weights 206
3 38 2 Install the front weights 208
3 38 3 Remove the 20 front weights 209
3 38 4 Remove the 32 front weights 212
3 38 5 Install the idler weight 215
3 38 6 Remove the idler weights 216
3 38 7 Install the undercarriage weights 217
3 38 8 Remove the undercarriage weights 218
3 38 9 Measure the slippage 219
3 39 Undercarriage 220
3 39 1 Undercarriage 220
3 39 2 Turn performance 221
3 40 Moldboard plough applications 223
3 40 1 Moldboard plough applications 223
3 40 2 Rollover ploughs 224
3 41 Special application machines – towed scrapers 225
3 41 1 Ballast for towed scrapers 225
3 41 2 Drawbars and hitches for a towed scraper 226
3 41 3 Hydraulic connections for a towed scraper 226
3 41 4 Connections for hydraulic power beyond – towed scrapers 227
3 41 5 Laser level controls – land leveling applications 227
3 41 6 Operation guidelines – scraper 227
3 41 7 Speed selection – scraper 228
4 Maintenance 229
4 1 Lubricant viscosities and refill capacities 231
Rubber Track Tractor
ACW3842930_ V02
rra~: •n•11 – Table
of contents
4 1 1 Lubricant viscosities for ambient temperatures 231
4 1 1 1 Lubricant viscosities 231
4 1 1 2 Refill capacities 231
4 2 Service intervals 233
4 2 1 Maintenance chart 233
4 2 2 Maintenance schedule 234
4 3 Fuse panel 236
4 3 1 Main fuse panel 236
4 3 2 Fuse block one 237
4 3 3 Fuse block two 238
4 3 4 Fuse relay block one 239
4 3 5 Fuse relay block two 240
4 3 6 Relay and fuse panel for chassis 240
4 3 7 Main fuse 241
4 4 Engine 242
4 4 1 Replace the engine air filter 242
4 4 2 Do a check of the engine oil level 242
4 4 3 Change the engine oil and oil filter 243
4 4 3 1 Examine the used filters 245
4 4 4 Engine oil sample port 245
4 4 5 Engine belts 245
4 4 6 Engine temperature 246
4 4 7 Open the engine cover 246
4 5 Fan drive belt removal and installation 247
4 5 1 Remove the fan drive belt 247
4 5 2 Install the fan drive belt 248
4 6 Fuel system 251
4 6 1 Fuel cap 251
4 6 2 Fill the fuel system 251
4 6 3 Change the prefilter and the fuel filters 252
4 6 4 Fuel water separator 253
4 6 5 Prime the fuel system 253
4 7 Cooling system 255
4 7 1 Clean the cooling cores 255
4 7 2 Water valve shutoff 255
4 7 3 Do a check of the engine coolant level 256
4 7 4 Drain the engine coolant 256
4 7 5 Cooling system additives 257
4 7 6 Coolant sample 257
4 7 7 Replace the water temperature thermostat 258
4 8 Flush and refill the cooling system 259
4 8 1 Coolant system fluid 259
4 8 2 Flush the cooling system 259
4 8 3 Refill the cool ing system 260
4 9 Hydraulics – check and change system oil 261
4 9 1 Do a check of the hydraulic system oil 261
4 9 2 Change the hydraulic system oil 262
4 10 Hydraulic filters 264
4 10 1 Replace the transmission and steering filter 264
4 10 2 Replace the implement filters 264
4 10 3 Replace the implement case drain filter 264
4 10 4 Replace the steering pump case drain filter 265
4 10 5 Remove the suction screen 266
4 10 6 Replace the transmission oil 267
4 11 Cab filtration 270
4 11 1 Primary fresh air filter 270
Rubber Track Tractor
ACW3842930_ V02
Table of contents
4 11 2 Remove the primary air filter 270
4 11 3 Filter maintenance 270
4 11 4 Clean the filter 271
4 11 5 Install the primary air filter 271
4 11 6 Remove the recirculation filter 271
4 11 7 Install the recirculation filter 272
4 12 Maintenance access 273
4 12 1 Remove the guards 273
4 12 2 Remove the engine fan guards 274
4 13 Undercarriage (Mobil trac) system 275
4 13 1 Do a check of the oil level for the drive wheel hubs 275
4 13 2 Change the drive wheel hub oil 275
4 13 3 Do a check of the oil level for the idler wheel and the mid roller wheel hubs 276
4 13 4 Change the oil on the idler and the mid roller wheel hub 276
4 13 5 Track and undercarriage inspection 276
4 13 6 Adjust the gauge spacing 277
4 13 7 Measure the gauge spacing 283
4 14 Special considerations – scraper 285
4 14 1 Belt untracking – scraper 285
4 14 2 Weight transfer limit 285
4 14 3 Towed scraper operation and inspection 286
4 14 4 Scraper setup 286
4 14 5 Retrieve a stuck machine/ scraper 286
4 15 Detention the tracks 288
4 15 1 Detension the tracks 288
4 15 2 Release the pressure between the nipple and the filler valve 289
4 16 Tension the tracks 290
4 16 1 Add tension to the tracks 290
4 17 Replace the track 293
4 18 Track alignment 295
4 18 1 Track alignment 295
4 18 2 Check the alignment 295
4 18 3 Adjust the track alignment 296
4 19 Batteries 297
4 19 1 Remove the batteries 297
4 19 2 Install the batteries 298
4 20 Prepare for the cold season 300
4 20 1 Cold season 300
4 20 2 Cold start 300
5 Troubleshooting 301
5 1 Heating and air conditioning troubleshooting 303
5 1 1 Retrieve diagnostic information from the automatic temperature control unit 303
5 2 Electrical system troubleshooting 306
5 3 Brake troubleshooting 307
5 4 Engine troubleshooting 309
5 5 Hydraulic troubleshooting 314
5 6 3-point linkage troubleshooting 316
5 7 Transmission troubleshooting 318
5 8 Steering system troubleshooting 320
5 9 Guidance troubleshooting 325
5 9 1 VarioGuide ready indicator is not on 325
5 9 2 VarioGuide ready indicator is on 326
5 9 3 VarioGuide de-activates during operation 326
Rubber Track Tractor
ACW3842930_ V02
rra~: •n•11 – Table
of contents
5 10 Machine Error Codes 328
5 10 1 Engine error codes 328
5 10 2 Transmission error codes 330
5 10 3 Armrest ECM error codes 335
5 10 4 Auxiliary valve one ECM error codes 339
5 10 5 Auxiliary valve two ECM error codes 340
5 10 6 Auxiliary valve three ECM error codes 340
5 10 7 Auxiliary valve four ECM error codes 341
5 10 8 Auxiliary valve five ECM error codes 341
5 10 9 Auxiliary valve six ECM error codes 342
5 10 10 Front lighting ECM error codes 342
5 10 11 Roof lighting ECM error codes 343
5 10 12 Rear lighting ECM error codes 343
6 Specifications 345
6 1 Engine specifications 347
6 2 Torque specifications 348
6 2 1 Constant torque hose clamps 348
6 3 Dimensions 349
6 3 1 Dimensions 350
6 4 Noise vibration level 351
6 5 Machine specifications 352
6 6 Shipping weights 355
7 Index 357
Rubber Track
1 1 Safety Information 15
1 1 1 Operator Manual 15
1 1 2 Safety symbol 15
1 1 3 Safety messages 15
1 1 4 Information messages 15
1 1 5 Safety signs 16
1 1 6 Important safety information 16
1 1 7 General hazard information 17
1 1 8 Pressurized air 18
1 1 9 Asbestos information 18
1 1 10 Electrical storm injury prevention 18
1 1 11 Mount and dismount the machine 18
1 1 12 Before you start the engine 19
1 1 13 Start the engine 19
1 1 14 Before operation 19
1 1 15 Procedures for operation 19
1 1 16 Park the machine 20
1 1 17 Operator station 20
1 1 18 Cut and crush prevention 21
1 1 19 Rollover protective structure 21
1 1 20 Burn prevention 22
1 1 21 Coolant 22
1 1 22 Oils 22
1 1 23 High pressure lines 22
1 1 24 Fluid penetration 23
1 1 25 Batteries 23
1 1 26 Exhaust fumes 24
1 1 27 Noise prevention 25
1 1 28 Fire and explosion prevention 25
1 1 29 Fire extinguisher 26
1 1 30 Public road transportation 26
1 2 Safety signs and labels 27
1 3 Engine safety signs 28
1 3 1 Engine oil filter 29
1 3 2 Belt routing 29
1 3 3 Informational – cab air conditioning 29
1 3 4 Separator filter 29
1 3 5 Fuel filter 30
1 3 6 Hot surface 30
1 3 7 High pressure hazard 30
1 3 8 Entanglement 31
1 3 9 Entanglement 31
1 3 10 Run over hazard 31
1 3 11 Fuel filter 31
1 3 12 Separator filter 32
1 3 13 Informational – engine air cleaner 32
1 3 14 Engine oil filter 32
1 3 15 Ether 32
1 3 16 Hot pressurized coolant 33
1 3 17 Engine oil sign 33
1 3 18 No step 33
Rubber Track Tractor
ACW3842930_ V02
13
Table of contents
1 4 Chassis safety signs 34
1 4 1 Engine cover support 35
1 4 2 Radiation hazard 35
1 4 3 Operators manual 35
1 4 4 Torque 35
1 4 5 Ultra low sulfur diesel fuel 36
1 4 6 Fall off hazard 36
1 4 7 Pinch hazard 36
1 4 8 Tiedown 36
1 4 9 Lift 37
1 4 10 Rear rollover 37
1 4 11 Crush warning 37
1 4 12 Power take off 37
1 4 13 Transmission oil fill 38
1 4 14 Torque 38
1 4 15 Torque 38
1 4 16 No step 38
1 5 Cab safety signs 39
1 5 1 Run-over hazard 40
1 5 2 Roll-over hazard 40
1 5 3 Bystander notification 40
1 5 4 Operators manual 40
1 5 5 Park brake 41
1 5 6 Installation date 41
1 5 7 Alternate exit 41
1 6 Hydraulic safety signs 42
1 6 1 High pressure hazard 43
1 6 2 High pressure fluid 43
1 6 3 Hydraulic couplers 43
1 6 4 Hydraulic oil filter 43
1 6 5 Oil level 44
1 7 Electrical safety signs 45
1 7 1 Rear terminal mini fuse relay 46
1 7 2 Fuse / relays 46
1 7 3 Electrical hazard 46
1 7 4 Battery explosion 46
1 7 5 12 volt 47
1 7 6 Electrical ground 47
1 7 7 Wire access 47
1 7 8 Battery shutoff 47

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M