Ferrari 612 Scaglietti Workshop Manual – PDF DOWNLOAD
$35.95
Instant English PDF of the Ferrari Technical Service workshop manual for the 612 Scaglietti. Factory sections 0–M: maintenance, V12 engine, Motronic, F1 gearbox, Skyhook, brakes, HVAC, electrics and body. ~1,026 pages.
Description
This publication is produced by Ferrari Technical Service as an aid to servicing Ferrari cars. It is addressed to expert technicians capable of correctly and safely servicing and repairing Ferrari cars. Attempting to work on the car without the necessary training can be a source of hazard for the technician and the driver and can also damage the car itself.
How the manual is organised
Ferrari numbered this book so a dealer tech can jump from a procedure in one section to a torque or a sensor in another without hunting:
- The manual is divided into sections identified by a letter (0, A, B, C, D, E, F, G, H, I, L, M).
- Each section is divided into chapters identified by the section letter plus a sequential number (example: A3, B2, D6).
- Each chapter is divided into paragraphs identified by letter, chapter number and a sequential number separated by a period (example: A3.12, C4.01, F4.01).
- That system lets the text cross-refer to chapters or paragraphs in other sections.
- An index at the start of each section tells you which chapter and paragraph to open for a given subject.
- Illustrations show the parts named in the text with numerical callouts.
Also in General Information: updating/print notes, symbols, abbreviations, service procedures, use of original tools and spare parts, guarantee repairs and tightening torques. Use Ferrari tools and parts where the procedure requires them.
Why specialists keep this PDF
| Programmed maintenance is written out Fluid specs, the service-time schedule and A3 procedures from oil and F1-system level through belts, plugs, alignment, leather care and chassis-frame checks. | V12 plus Motronic in one book Engine removal, reassembly and overhaul, dry-sump lubrication, cooling, fuel, intake/exhaust, then sensors, actuators and Motronic ECU replacement. | |
| Manual clutch and F1 gearbox Clutch hydraulics and bleeding sit next to gearbox overhaul, then the electronically controlled gearbox: TCU, hydraulics, power unit, actuators and sensors. | Chassis, Skyhook and coachwork Full front/rear suspension detach, variable-setting shock system, TPMS, ABS/ASR, airbag, HVAC charge, electrics and workshop paint cycles including SMC bumpers. |
Complete contents — every factory section
0 — General information
- 01 Organisation of the manual: consulting the manual, updating-print, symbols, abbreviations and special terms
- 02 General information: user of the manual, service procedures, original tools and spare parts, guarantee repairs, tightening torques
- 03 Safety: prevention measures and protection devices, dangerous parts, dangerous products and emissions
- 04 Car specifications: identification data, plates
- 05 Specifications: performance and consumption, dimensions and weights
A — Refilling and maintenance
The chapter you open for a scheduled service. Fluids first, then the time schedule, then the individual A3 jobs from oil through leather.
- A1 Refilling: characteristics of the fluids used, refill servicing table
- A2 Programmed maintenance plan: service time schedule
- A3 Maintenance procedures:
- A3.01 Engine oil and filters — level check and replacement
- A3.02 Gearbox-differential oil — checking and changing
- A3.03 “F1” gearbox system oil level
- A3.04 Window and headlight washer fluid
- A3.05 Brake and clutch system level
- A3.06 Hydraulic steering fluid level
- A3.07 Cooling-system fluid — checking and refilling
- A3.08 Active-carbon filter replacement
- A3.09 Lambda sensor replacement
- A3.10 Air-filter replacement
- A3.11 Air-conditioning system filter replacement
- A3.12 Timing-belt tension check and replacement
- A3.13 Auxiliary-member belt tension check and replacement
- A3.14 Spark-plug check and replacement
- A3.15 Blow-by system lines and connections
- A3.16 Cooling-system hoses and fittings
- A3.17 Injection and ignition system hoses and fittings
- A3.18 Exhaust-system connections
- A3.19 Exhaust-emission levels
- A3.20 Service brakes check
- A3.21 Service/parking-brake operation and backlash
- A3.22 Suspension components
- A3.23 Wheel-alignment control
- A3.24 Seat and seat-belt fittings
- A3.25 Battery check and recharge
- A3.26 Alternator absorption and recharging
- A3.27 Chassis frame members
- A3.28 Wheels and tyres
- A3.29 Air-conditioning and heating system
- A3.30 Brake-system control
- A3.31 Tightening bolts, fittings and clips
- A3.32 Lubrication and hinge/adjuster control
- A3.33 Leather interior treatment
B — Engine
- B1 Introduction: technical specifications, tightening torques, specific equipment
- B2 Procedures: removal, reassembly, engine overhaul
- B3 Lubrication: system outline, oil-gas and vapour recirculation, oil pump, oil tank, engine oil radiator, blow-by system
- B4 Cooling: system outline, water pump, thermostatic valve, water radiator, expansion tank, heads’ water manifold
- B5 Fuel supply: system outline, fuel-vapour emission outline, fuel-pump unit, fuel-level gauge, pressure regulator, roll-over shut-off valve, fuel tank, motor-driven throttle body
- B6 Air intake and exhaust: intake outline, intake manifold, air intake, actuating-system outline, exhaust outline, catalytic converter, silencer, exhaust manifold
C — Injection-ignition
- C1 Specifications: specifications and system description
- C2 Sensors: timing sensor, angular-velocity sensor, air-flow meter, coolant-temperature sensor, throttle potentiometer, oxygen / lambda sensor, detonation sensor, accelerator-pedal position sensor, vapour check valve
- C3 Actuators: fuel pump, electro-injectors, coil, anti-evaporation solenoid valve, pneumatic-actuation system solenoid valves, anti-evaporation electrovalve, secondary-air pump
- C4 Procedures: replacing the Motronic ECU
D — Clutch, gearbox, differential
- D1 General: technical specifications, tightening torques, specific tooling
- D2 Procedures: removal, reassembly, gearbox overhaul
- D3 Clutch: replacing components, clutch-pedal stroke adjustment, clutch-control hydraulic system, system bleeding
- D4 Gearbox: replacing gearbox housing and control lever, side cover, gearbox oil radiator, transmission shaft
- D5 Differential and axle shafts: replacing differential components, axle shaft
- D6 Electronically-controlled gearbox (F1): transmission control unit (TCU), operation, hydraulic system, power unit, actuators, measuring sensors and signal switches
