Gehl V270 V330 Vertical Lift Skid-Steer Loader Parts Manual 917376 Rev F – Instant PDF Download

Description

Gehl V270 & V330 Vertical Lift Skid-Steer Loader Parts Manual – Form 917376, Revision F

This is the complete Gehl V270 V330 parts manual for the vertical lift skid-steer loader family, issued under Form No. 917376, Revision F (03/12). It documents every service part, assembly and component group used on the V270, V270 (EU), V330 and V330 (EU) machines, with serial-number break points throughout so you order the correct part number for your exact build. If you are sourcing a replacement hydraulic pump, matching a seal kit, hunting down a cab latch or identifying a discontinued bracket, this is the reference that carries the Gehl part number.

Every parts listing shows the reference number, part number, description and required quantity. Where a fastener needs a non-standard torque value or a specific lubricant, that requirement appears in parentheses directly after the description – so you never have to cross-reference a separate torque table to install a bolt correctly. A note at the front of the manual confirms the model and serial number decal location (right chassis upright) and defines “right” and “left” from the operator’s seat facing forward, which removes ambiguity when ordering mirror-image parts such as the fuel tank, chassis covers or ROPS fillers.

File Details

• Manual type: Parts Manual
• Brand: Gehl
• Models covered: V270, V270 (EU), V330, V330 (EU)
• Form number: 917376
• Revision: F
• Publication date: 03/12
• Language: English
• File format: PDF (instant download)
• Page count: 222 pages
• Publisher: Manitou Americas, Inc.

Chapters Covered

• Section A: Main Loader Component
• Section B: Hydraulic Components and Heater/HVAC Housings
• Section C: Kits and Accessories
• Section D: Schematics
• Numerical Index
• O-Ring Table, Coupling & Adapter Torque Table
• Torque Specifications Table

Section A: Main Loader Component

This is the largest section of the manual and covers the structural and mechanical parts of the loader itself. It begins with the chassis (including HVAC and heater completing items), the grille and engine cover, and the ROPS/FOPS structure and interior – available in non-HVAC, HVAC and EU door-completing configurations. From there it moves through the restraint bar, seat and seat-belt options, the lift arm, the attachment bracket (including the Power-A-Tach quick-attach system) and the wheel drives. Sub-assemblies such as the axle assembly, chain case cover, sprockets and chains are broken down with individual component part numbers.

The engine chapter covers the Yanmar 4TNV98T-ZXNMS2/IT and 4TNV98T-ZNMS powerplants along with their mounts, alternator, starter, fuel feed pump, fuel separator, dipstick and oil filter. Air cleaner and exhaust listings follow, then the radiator/cooler group, hydrostatics with drive motors, chassis hydraulics (including auxiliary hydraulics), lift-arm hydraulics, lift/tilt and traction controls, engine controls, electrical chassis, ROPS/FOPS electrical, lighting, engine electrical (including the EU electrical disconnect switch), tires, the four-point lift assembly, sound suppression and decals.

Section B: Hydraulic Components and Heater/HVAC Housings

Where Section A covers the machine as assembled, Section B goes inside the major hydraulic and climate components. You get exploded parts breakdowns for the lift cylinder and tilt cylinder, the single- and two-speed drive motors with parking brake, the tandem pumps, the single and double gear pumps, the self-leveling valve, the solenoid valves for brake, joystick supply and brake release, the main control valves, the three- and five-bank proportional valves, the Hydraglide ride control manifold valve, the condenser, heater housing and HVAC housing assembly, the lift assist pump and cylinder, the Power-A-Tach pump and the foot valve. Each assembly is itemized so you can order the exact cartridge, coil, seal kit or gland instead of the whole unit.

Section C: Kits and Accessories

This section lists every factory-supported kit and accessory for the V270 and V330. It opens with the filter listing, analysis kits and other available accessories, then documents each kit by part number: the backup alarm kit, side window kit, rearview mirror kit, cab door kit (with the door-completing package), counterweight kits, AM/FM radio kit, heater/defroster kit, pre-cleaner kit, 14-pin electrical auxiliary connector kit, warning lamp kit, rear wiper kit, flasher kit, auxiliary coupler service kits, Power-A-Tach kit, parking brake release kit, four-point lift kit, self-leveling kit and impact-resistant door kit. If your machine came without a factory option and you want to add it later, this section gives you the part numbers to do it.

Section D: Schematics

The schematics section includes the heater schematic, the HVAC schematic, the 14-pin electrical auxiliary schematic, the engine electrical schematic, the rear light power distribution schematic, the ROPS/FOPS electrical schematic, the chassis electrical schematic, and both the dual joystick and hand/foot control hydrostatic/hydraulic schematics. The full chassis electrical schematic includes a wire color code and function table so you can trace any circuit – from the CAN bus twisted pair to the individual coil feeds – without guessing.

Reference Tables and Numerical Index

At the back of the manual you get a full numerical index listing every part number in the book alongside its page and reference number – the fastest way to find a part when you already know the number. Two service tables follow: the O-ring table with coupling and adapter installation torque specifications (SAE O-ring boss and JIC 37°/45° fittings), and a general torque specification table covering Unified National and Metric threads across grades 2, 5 and 8 (and 8.8, 10.9, 12.9 for metric), given in both dry and lubricated values.

Serial Number Breaks You Can Trust

Running changes are part of life on a skid-steer loader, and this manual handles them with clear serial-number dividers on the affected parts pages. You will see the V270 and V330 split out at different break points depending on the assembly – from early machines in the 021xxx and 131xxx ranges through to the later SN 021951+/131401+ builds used for the final production configuration. That means when you are looking at a cover panel, a hydraulic tube, a solenoid valve or an electrical harness, you can match the part number to your machine instead of ordering by guesswork.

What This Gehl V270 V330 Parts Manual Lets You Do

With this manual on hand you can order the correct Gehl part number the first time instead of the third time. You can rebuild a lift or tilt cylinder, reseal a drive motor, replace a failed solenoid cartridge, swap out a tandem pump, or add a factory cab door or heater kit with the confidence that every seal, gland, snap ring and bracket you need is listed by its proper part number. For anyone maintaining a fleet of skid-steer loaders, having the serial-number break points spelled out on the page is the difference between a one-day repair and a week of return shipping.

Older Gehl skid steers are still working hard on farms, construction sites and rental yards across North America and Europe. Parts availability depends on having accurate numbers, and this manual is the source of those numbers. The schematics section alone – wire color codes, harness routing, hydraulic circuit paths – is worth the price of the whole document when you are chasing an intermittent electrical fault or a hydraulic leak that only shows up under load.

IMAGES PREVIEW

Delivered as an instant PDF download, this Gehl V270 V330 parts manual is ready to use the moment your payment clears. There is no shipping, no waiting, and no physical book to lose. Open it on a laptop in the shop, a tablet on the machine, or print the pages you need and carry them into the field. Every part number, exploded view and schematic for the Gehl V270 and V330 vertical lift skid-steer loaders is in your hands within minutes of checkout.