Geringhoff Mais Star Corn Header Parts Catalog 9000124-01 – DE/EN PDF Download

Description

File Details

• Manual type: Parts Catalog (Ersatzteilliste)
• Brand: Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG
• Model: Mais Star (MS), also covering NS and RD header variants
• Document number: 9000124 – 01
• Language: German / English (bilingual)
• Page count: 527 pages
• File format: PDF

Chapters Covered

• Using the Geringhoff Parts Catalog with Coded Reference (50/00, 50/01)
• DIN Standard Parts Reference (50/07 – 50/09)
• Row Unit Frames, Chain Guides and Knife Rolls (51 xxx)
• Couplings: Centa and Folding (52 xxx)
• Central Framework, Hoods, Dividers and Scan Systems (53 xxx)
• Augers, PPV Controls and Drive Gearboxes (54 xxx)
• Drive Components, Crown/Miter Gearboxes and Shift Gearboxes (55 xxx)
• Down Corn Auger (56 500)
• Combine Adapters: NH, Claas, JD, AF, AFX, MF/CH/Fendt (60 – 66 xxx)
• ICF / LMS Arm Systems: 2-System and 4-System (81 xxx)

Using the Catalog and Coded Reference System

The opening sections explain the coded reference system that Geringhoff uses throughout this Mais Star parts catalog. The code tables define the header type (MS for Mais Star, plus NS and RD variants), row widths, colour coding, drive-side designations, build-year ranges, and feature codes such as F for folding, S for small frame, L for wide frame and B for headers driven from both sides. Manufacturer codes for Caterpillar, Claas, Deutz-Fahr, Fendt, Gleaner, Case IH, John Deere, Laverda, Massey Ferguson, New Holland and Sampo are listed, together with ATP drive-position references (ATP 50 through ATP 73). Before ordering a part, this is the section to read.

DIN Standard Parts Reference

Pages 50/07 through 50/09 list the DIN standard hardware used across the header: hex bolts, socket-head bolts, washers, snap rings, deep-groove ball bearings, tapered roller bearings, feather keys, flange nuts, clevis joints, lubrication fittings and seals. Each DIN number is cross-referenced with its German and English description so the correct fastener or bearing can be identified and sourced from any supplier.

Row Unit Frames, Chain Guides and Knife Rolls

Section 51 covers the row-unit assembly in detail: longitudinal supports, pick-row plates, adjustable tubes, hold-down bolts, knife strippers, wear plates, deck plates and mounting bridges. Chain guide assemblies are broken down for Rw. 20″, 22″, 50 cm and wider >60 cm row widths, with the 6-lug and 9-lug gathering chains, sprockets, chain tensioners, guides, plastic sliders and spring compression components all listed. The MS-L knife rolls (Messerwalze) are covered with rotor shafts, rotor knives, additional working edges, bearing housings, deep-groove ball bearings, angular-contact bearings and Nilos rings.

Couplings: Centa and Folding

Section 52 lists every coupling used across the Mais Star range. The Centa coupling assemblies (52 002 01, 52 004 01, 52 005 00) cover row widths from Rw. 20″ through Rw. 105 cm, with clutch hubs, elastic elements, central sections and Centaloc clamping screws. The RD folding coupling systems (52 013 00, 52 015 00) are broken down for Rw. 60 cm, 62.5 cm, 70 cm, 75 cm, 80 cm and 36″ variants, and the 52 017 00 folding coupling for Rw. 38″ is fully detailed. The 52 021 00 folding coupling system for Rw. 20″ and 22″ is also covered.

Central Framework, Hoods, Dividers and Scan Systems

Section 53 is the largest group in the catalog and covers the complete header body. It includes the central framework (Mittelkarosserie) and centre hood assemblies in every colour variant: red, green, gold-yellow, signal-yellow, silver-grey and blood-orange. It covers outer hoods, outer frameworks, centre dividers, plastic shoes in yellow and black, adjustment rods, damper elements, spring guides, locking levers, locking hooks, bonnet guides and chain covers. The 53 103 00, 53 106 00 and 53 108 00 series cover 80 cm, 70/28″, 75/30″, 36″/38″, 20″, 22″ and 50 cm frameworks. Row bracing and hood supports (53 143 00) and the folding coupling covers (53 144 00) are also included. The 53 150 00 and 53 151 00 sections cover the Claas scan installations for pre-2010 and 2011-and-later machines. The 53 113 00, 53 117 00 and 53 119 00 sections detail the poly foldable hoods for Rw. 38″, Rw. 20″/22″ and Rw. 70/28″, 75/30″, 80 cm, 36″ respectively. The 53 124 00 section covers the outer framework and outer dividers. The 53 350 01 auger cover is also included.

Augers, PPV Controls and Drive Gearboxes

Section 54 covers the complete auger programme. Rigid augers (starr) are listed with 450 mm and 600 mm pitches, for drive-row and ATP configurations, in the 54 204 00 and 54 206 01 series. Foldable augers (klappbar) appear in the 54 254 01 and 54 256 01 sections with 450 mm and 600 mm pitches. Asymmetrical augers are covered in 54 292 01 and 54 294 01. The 54 240 01 and 54 242 01 outer auger sections, 54 263 02 and 54 265 01 outer sections, 54 273 01 and 54 275 01 right outer sections, and 54 296 00 and 54 298 00 outer sections are all documented. Auger accessories such as rubber paddles (54 208 00), conveyor clamps (54 209 00) and drive parts (54 400 02) with sprockets and chains are included. The 54 140 01, 54 141 00 and 54 142 00 sections cover PPV adjustment cylinders and PPV speed displays. The 54 305 1 and 54 306 0 sections cover hydraulic connections. The 54 700 00, 54 710 00, 54 750 00 and 54 760 00 sections cover frame tubs, crossbeams, rear panels and scraper sets across the full range of working widths.

Drive Components, Gearboxes and Joint Shafts

Section 55 covers all drive-line components. The 55 002 0 section is the ATP overview with drive positions for ATP 50 through ATP 73. The 55 006 02, 55 008 04, 55 011 01, 55 012 01 and 55 015 04 series cover drive parts for crown gearboxes 470/475/480″/430″, 670/675/680, 500, 600 and 636″-640″/800B-1800B. The 55 021 00 and 55 022 00 sections cover miter gearboxes and row drive components. The 55 023 0, 55 024 0, 55 025 0 and 55 026 0 sections cover protection covers and joint shafts. The 55 027 0, 55 028 0 and 55 029 0 sections cover joint shafts for 670/675/680 (ATP 53 and 62), 636-640/800B-1000B/1200-1800B and 500 machines. The 55 033 00 and 55 035 00 sections cover drives with sealing shafts. The 55 044 00 and 55 046 00 sections cover 4-gear and 2-gear shift gearboxes in complete detail. The 55 054 05 and 55 056 00 sections cover auto catch systems for 600FS, 600F and 600FL. The 55 063 05 section covers the self-catch system for 800FB. The 55 066 00 section covers protective shields for various combine adapters. The 55 071 05 section covers the 1230″FB self-catch system. The 55 072 0 through 55 078 0 sections cover joint shafts and joint-shaft halves for SFS 830″-880FB, 870-875FB and 1200FB. The 55 101 02, 55 111 03 and 55 115 00 sections cover miter gearboxes, crown gearboxes and repair sets.

Down Corn Auger

Section 56 500 03 covers the Lagermaisschnecke (down corn auger) in both L and R variants, including the auger body, bearing holder, bearing housing, coupling plate, coupling hub, OMP50 Danfoss hydraulic motor, hydraulic hoses and hydraulic couplings.

Combine Adapters

Adapters for mounting the Mais Star header to specific combine harvesters are covered in sections 60 through 66. The 60 058 00 section covers the NH adapter with roof adapter, floor plate extension, locking mechanism and flexible edge protection. The 62 012 00 and 62 042 00 sections cover the Claas Lexion Tucano adapters. The 63 002 00, 63 032 00 and 63 072 00 sections cover John Deere and AF adapters, including locking plates, roof adapters, floor plate extensions and protection rubber for channel sealing. The 64 014 00 and 64 052 00 sections cover AF and AFX adapters with locking, eccentric adjustment, distance plates and locking bolts. The 66 120 00 section covers the MF/CH/Fendt Rotary adapter.

ICF / LMS Arm Systems

Section 81 covers the ICF/LMS arm systems fitted to certain header variants. The 81 010 02 section covers the 4-system with bolts, sleeves, eccentric rings, bearing sockets, gears, conveyor segments, hydraulic lines and coupling rods, listed by working width from 836 through 2450. The 81 020 02 and 81 030 02 sections cover the 2-system and 2-system with sensor. The 81 035 01, 81 040 01, 81 045 01 and 81 050 01 sections cover arms A, B, C and D with hydraulic cylinders, swivel heads, bolts, bearing sockets, routing links, distance sockets and grease nipples. The 81 052 01 section covers the drive head for arms A and B including the miter gearbox, oil motor OMP 200, coupling hubs, gear hubs and profile shaft. The 81 053 01 and 81 054 01 sections cover the arm C/D headpiece and tube assemblies.

Put the Right Part Number on Every Order

This Geringhoff Mais Star parts catalog (document 9000124 – 01) is the reference you need when a row unit needs a new chain, a knife roll bearing starts howling, an auger finger set is worn flat, a Centa coupling element fails, or a folding hood cylinder needs replacing. The exploded parts diagrams and code system let you narrow down the exact part by header type, row width, drive-side and colour variant before you place the order — cutting the back-and-forth with your dealer and the risk of fitting the wrong component.

Every section is organised the same way: an illustration with position numbers on one page, followed by a parts table listing the position number, Geringhoff part number, quantity, German description and English description. The DIN standard parts reference at the front covers every bolt, washer, snap ring, bearing and seal used in the assembly, so even generic hardware can be identified without a separate trip to a fastener catalogue.

Because the catalog is bilingual German/English, it works equally well for workshops across Europe and North America. The model codes and part numbers are printed exactly as Geringhoff issues them, so there is no ambiguity when a part is ordered. Whether you run a single MS 6 across 75 cm rows or a fleet of MS 12 machines with a mix of JD, Claas, NH and Case IH adapters, the relevant parts sections and adapter codes are all here in one document.

IMAGES PREVIEW

Delivery is instant. Purchase once and the PDF downloads immediately — no shipping, no waiting for a printed copy, no risk of a damaged binder arriving in the post. Open it on a laptop or tablet in the workshop, or print the specific pages you need for the job in front of you. Keep it on a phone for quick part-number lookups when you are standing next to the machine. Because it is a digital file, you can search across it, bookmark the sections you use most, and keep a backup copy on a USB stick or cloud drive so it is always available when a breakdown happens.