Grove Crane RT 528 Series Operator’s & Safety Handbook Manual – PDF DOWNLOAD

Description

Grove Crane RT 528 Series Operator’s & Safety Handbook Manual – PDF DOWNLOAD

FILE DETAILS:

Grove Crane RT 528 Series Operator’s & Safety Handbook Manual – PDF DOWNLOAD

Language : English
Pages : 190
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Grove Crane RT 528 Series Operator’s & Safety Handbook Manual – PDF DOWNLOAD

FOREWORD:

• This handbook has been compiled to assist you in properly operating and
  maintaining your Grove Crane.
• Before placing the crane in service, take time to thoroughly familiarize yourself
  with the contents of this manual. After all sections have been read and
  understood, retain the manual for future reference in a readily accessible
  location.
• The Grove Crane has been designed for maximum performance with minimum
  maintenance. With proper care, years of trouble-free service can be
  expected.
• Constant improvement and engineering progress makes it necessary that we
  reserve the right to make specification and equipment changes without
  notice.
• Engine operating procedures and routine maintenance procedures are supplied
  in a separate manual with each crane, and should be referred to for
  detailed information.
• Information in this manual does not replace federal, state, or local regulations,
  safety codes, or insurance requirements.
• Any reference to Krueger in this manual is to be used for general information
  only. For detailed operating instructions of the Krueger System, refer to the
  Krueger Operator’s Handbook.
• Changes from the first printing of this manual that have been made in the text
  are marked by a vertical bar ( ) on the margin ofthe page opposite the change.
• In the event some text is removed, and is not replaced with new or changed
  material, a deletion arrow is used where the text was deleted.
• In the event there is a change in an illustration, a hand with a pointing finger
  will be used to point out where the change occurred
• A CHANGE RECORD page is included as page iv herein. It is intended that the
  recipient of the changes keep this CHANGE RECORD updated as each
  change is received by him.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Grove Crane RT 528 Series Operator’s & Safety Handbook Manual – PDF DOWNLOAD

GENERAL
Page
INTRODUCTION 1-1
LIST OF SPECIFICATIONS 1-3
SECTION II
SAFETY PRECAUTIONS
GENERAL 2-1
TRAVEL OPERATION 2-10
CRANING OPERATION 2-13
JIBS 2-38
WIRE ROPE AHD SHEAVES 2-39
CONTROLLED FREE-FALL HOIST 2-44
ELECTRICAL HAZARDS 2-45
PERSONNEL PLATFORMS 2-60
COLD WEATHER OPERATION 2-61
DON’T FORGET 2-62
SECTION Ill
DESCRIPTION
GENERAL 3-1
MAJOR COMPONENTS AND SYSTEMS 3-1
Cab Assembly 3-1
Carrier Frame Assembly 3-1
Engine 3-2
Fuel Tank 3-2
Drive Train 3-2
Axles 3-2
Steering System 3-3
Axle Oscillation Lockout System 3-3
Air System 3-3
ix
Page
Hydraulic System and Components 3-3
Reservoir 3-3
Hydraulic Oil Cooler (Optional) 3-4
Pumps 3-4
Directional Control Valves 3-4
Hydraulic Boost Circuit 3-4
· Turntable Assembly and Swing Mechanism 3-5
Swing Motor 3-5
Swing Gearbox 3-5
Boom Assembly 3-5
Main Hoist 3-5
Outrigger System 3-6
Swivels 3-6
Electrical System 3-6
Batteries 3-6
OPTIONAL SYSTEMS 3-6
Tow Winch 3-6
Heater 3-7
Tire Inflation Kit 3-7
Emergency Steer Pump 3-7
Rear Axle Lockout Override 3-7
Engine Block Heater 3-8
Rear Steer Indicator 3-8
Backup Alarm 3-8
Swingaway Boom Extension 3-8
Controlled Free-Fall 3-8
Operating Control 3-10
Hoist Brakes 3-10
Auxiliary Hoist 3-11
Outrigger Stabilizer Spin-Type Locks 3-11
ENGINE CONTROLS AND INDICATORS 3-11
Hand Throttle Lock Control 3-11
Transmission Oil Pressure Gauge 3-12
Engine Oil Pressure Gauge 3-12
Transmission Oil Temperature Gauge 3-12
Engine Oil Temperature Gauge 3-12
Fuel Gauge 3-1 5
Voltmeter 3-1 5
Engine Stop Switch (GMC and Deutz) 3-15
X
Page
V-Belt Failure Indicator (Deutz Only) 3-15
Ignition Switch 3-15
Tachometer (Optional) 3-16
Quick Start Switch (Optional) 3-16
Engine Coolant Temperature Gauge 3-1 6
Foot Throttle Pedal 3-1 6
Engine Distress Indicator (CAT, Cummins and GMC)
(Optional) 3-17
CRANE CONTROLS AND INDICATORS , 3-17
Transmission Shift Levers 3-17
Swing Control Lever 3-17
Boom Telescope Control Lever 3-17
Rear Steer Control Lever 3-17
Boom Lift Control Lever 3-1 8
Auxiliary Hoist Control Lever (Optional) 3-18
Main Hoist Control Lever 3-1 8
Free-Fall Control Lever (Optional) 3-18
Hoist Rotation Indicators (Optional) 3-18
Transmission Range Selector Switch 3-1 8
Outrigger Control Panel 3-19
Swing Brake Control 3-1 9
Brake On Indicator 3-19
Elevate Boom Indicator (If Applicable) 3-19
Axle Lockout Override Indicator (Optional) 3-19
Rear Wheels Not Cantered Indicator (Optional) 3-20
Low Air Pressure Indicator 3-20
Air Pressure Gauge 3-20
Axle Lockout Override Switch (Optional) 3-20
Swing Brake Pedal 3-20
Boom Lift Control Pedal 3-21
Brake Foot Pedal 3-21
Hourmeter 3-21
Park Brake Control 3-21
Krueger Antitwo-Block System 3-21
Swing Lock Control Handle 3-22
ACCESSORY CONTROLS AND INDICATORS 3-22
Emergency Steering System Indicator 3-22
Lights Switch 3-22
Boom Flood Light Switch (Optional) 3-22
Rotating Beacon Light Switch 3-22
xi
Page
Cab Circulating Fan 3-23
Horn 3-23
Turn Signal/Four-Way Flasher Switch 3-23
Dash Light 3-23
Cab Dome Light 3-23
Spotlight (Optional) 3-23
Skylight Wiper (Optional) 3-23
Windshield Wiper Switch 3-24
Boom Angle Indicator (Optional) 3-24
Bubble Level Indicator 3-24
Heater Air Flow Control (9ptional) 3-24
Heater Air Temperature Control (Optional) 3-24
Heater Electrical Control Panel (Optional) 3-24
SECTION IV
OPERATING PROCEDURES
PRESTARTING CHECKS 4-1
Fuel Supply 4-1
Engine Oil 4-1
Engine Coolant 4-1
Batteries 4-1
Signal and Running Lights 4-1
Foot and Parking Brakes 4-1
Daily Lubrication 4-2
Hydraulic Reservoir and Filter 4-2
Tires 4-2
Wire Rope 4-2
Hook Block 4-2
Air Cleaner 4-2
Air Induction Hood Flange Gasket (Deutz Engine) 4-2
ENGINE OPERATION 4-2
Starting Procedure 4-3
Cold Weather Starting 4-4
Shutdown Procedure 4-5
Emergency Engine Shutdown 4-5
CRANE TRAVEL OPERATION 4-7
Traveling – General 4-7
Moving the Crane 4-9
xii
Page
Steering 4-9
Front Wheel Steering 4-9
Traveling – Forward 4-11
Traveling – Reverse 4-12
Four Wheel Drive Operation 4-12
GENERAL CRANE OPERATION 4-13
Pump Drive 4-13
Control Lever Operation 4-14
Preload Check 4-14
USING YOUR LOAD CHART 4-15
CRANE FUNCTIONS 4-17
Setting the Outriggers 4-18
Stowing the Outriggers 4-19
Swinging the boom 4-21
Elevating and Lowering the Boom 4-22
Elevating the Boom 4-22
Lowering the Boom 4-22
Foot Control 4-23
Emergency Boom Operating Procedures 4-23
Telescoping the Boom 4-24
Extending the Boom 4-24
Retracting the Boom 4-25
Lowering and Raising the Cable 4-25
Lowering the Cable 4-25
Raising the Cable 4-26
Recommended Crane Shutdown Procedures 4-26
OPTIONAL EQUIPMENT OPERATION 4-27
Diesel Fuel Heater 4-27
Starting i 4-27
Operating 4-27
Stopping 4-27
Propane Heater 4-27
Starting 4-27
Operating 4-28
Stopping 4-28
Engine Quick Start System 4-28
Controlled Free-Fall 4-29
Operating the Hoist In the Controlled Free-Fall Mode 4-29
Suggested Procedures for Operators 4-30
Back Pressure 4-31
xiii
Page
SECTION V
OPERATIONAL AIDS
GENERAL 5-1
KRUEGER LOAD MOMENT INDICATING (LMI) SYSTEM 5-1
ANTITWO-BLOCK SYSTEM 5-1
CONTROL LEVER LOCKOUT SYSTEM 5-2
SECTION VI
LUBRICATION
GENERAL 6-1
LUBRICANTS 6-1
Hydraulic Oil Recommendat•ons 6-4
Viscosity 6-5
Arctic Conditions (Below O Degrees F [-18 Degrees C]) 6-6
Antiwear Additives 6-6
LUBRICATION POINTS 6-7
WIRE ROPE LUBRICATION 6-21
SECTION VII
SETUP AND INSTALLATION PROCEDURES
GENERAL 7-1
INSTALLING CABLE ON THE HOIST 7-1
CABLE REEVING · 7-2
ERECTING AND STOWING THE SWINGAWAY BOOM
EXTENSION 7-3
Erecting 7-3
Stowing 7-8
Setting the Offset 7-10
Changing the Boom Extension Nose 7-12
Setting the Telescope Extension Length 7-13
Extending 7-13
Retracting 7-14

Questions? Email us: [email protected]

https://vimeo.com/857473745?share=copy

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V