Grove Crane RT9000E Operator’s Manual 076-00 – PDF DOWNLOAD

Description

Grove Crane RT9000E Operator’s Manual 076-00 – PDF DOWNLOAD

FILE DETAILS:

Grove Crane RT9000E Operator’s Manual 076-00 – PDF DOWNLOAD

Language : English
Pages : 112
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Grove Crane RT9000E Operator’s Manual 076-00 – PDF DOWNLOAD

INTRODUCTION:
GENERAL:

• This Handbook provides important information for the operator of the Model RT9000E Series Grove
  Crane.
• The rough terrain crane incorporates an all welded steel frame, using planetary drive axles to
  provide four-wheel drive. Axle steering is accomplished utilizing hydraulic steer cylinders. The
  engine is mounted at the rear of the crane and provides motive power through a six speed forward
  and reverse transmission. Hydraulic, double box, sliding beam outriggers are removable.
  The carrier frame incorporates an integral fifth wheel, to which the rear axle is mounted, to
  provide axle oscillation. Axle oscillation lockout is automatic when the superstructure rotates
  from the travel position.
• The superstructure is capable of 360° rotation in either direction. All crane functions are
  controlled from the fully-enclosed cab mounted on the superstructure. The crane is equipped with a five-section, full power, sequenced and synchronized boom. Additional reach is obtained by utilizing an optional swingaway
  boom extension. Lifting is provided by a main and auxiliary hoist.

TABLE OF CONTENTS:

Grove Crane RT9000E Operator’s Manual 076-00 – PDF DOWNLOAD

SECTION 1 INTRODUCTION
SECTION 2 SAFETY INFORMATION
SECTION 3 OPERATING CONTROLS AND PROCEDURES
SECTION 4 SET-UP AND INSTALLATION
SECTION 5 LUBRICATION
SECTION 6 MAINTENANCE CHECKLIST

SECTION 1 INTRODUCTION
General 1-1
Noise/Vibration Test Results 1-1
Noise Level Test Results Are As Follows: 1-1
Vibration Level Test Results Are As Follows: 1-1
SECTION 2 SAFETY INFORMATION
Diesel Engine Exhaust 2-1
Battery Posts, Terminals, And Related Accessories 2-1
Safety Messages 2-1
General 2-1
Safety Alert Symbol 2-1
Signal Words 2-1
General 2-1
Operator’s Information 2-2
Operational Aids 2-2
Operator’s Qualifications 2-3
Crane Stability/Structural Strength 2-3
Load Charts 2-4
Work Site 2-5
Lifting Operations 2-5
Counterweight 2-6
Multiple Crane Lifts 2-6
Load Moment Indication (LMI) Systems 2-7
Two-Blocking 2-7
Work Area Definition System 2-7
Electrocution Hazard 2-7
Set-Up and Operation 2-8
Electrocution Hazard Devices 2-8
Electrical Contact 2-9
Special Operating Conditions and Equipment 2-9
Crushing Hazards 2-10
Personnel Handling 2-10
travel operation 2-11
Accidents 2-12
Maintenance 2-12
Service and Repairs 2-12
Lubrication 2-12
Tires 2-13
Wire Rope 2-13
Batteries 2-14
Engine 2-14
Work Practices 2-14
Crane Access 2-14
Job Preparation 2-14
Working 2-15
Lifting 2-15
Hand Signals 2-16
Transporting The Crane 2-17
Shut-Down 2-17
Boom Extension/Jib 2-17
Cold Weather Operation 2-17
Temperature Effects On Hydraulic Cylinders 2-18
TABLE OF CONTENTS RT9000E
TOC-2
SECTION 3 OPERATING CONTROLS AND PROCEDURES
Controls And Indicators 3-1
Defroster Switch 3-1
Hand Throttle Control 3-1
Ignition Switch 3-1
Voltmeter 3-1
Transmission Oil Temperature Gauge 3-1
Heat Control Knob 3-1
Fan Control Switch 3-1
Park Brake Control Switch 3-1
Air Conditioner Control Switch (Optional) 3-5
Swing Brake Control Switch 3-5
Axle Differential Lock Control Switch (Optional) 3-5
Swing Speed Control Switch 3-5
Drive Axle Selector Switch 3-5
Cab Tilt Switch 3-5
Outrigger Control Switches 3-5
Work Light Switch 3-5
Headlights Switch 3-5
Boom Lights Switch (Optional) 3-6
Hazard Lights Switch 3-6
Hose Reel Brake On Indicator 3-6
Fuel Gauge 3-6
Engine Diagnostics Switches 3-6
Engine Coolant Temperature Gauge 3-6
Tachometer 3-6
Crane Function Power Switch 3-6
Outriggers Extend/Retract Switch 3-6
Load Moment Indicating (LMI) and Work Area Definition System Control Panel 3-7
Auto/Manual Boom Telescope Mode Switch 3-7
Center Mid/Inner Mid Boom Telescope Section Select Switch 3-7
Rear Steer Control Switch 3-7
Auxiliary Hoist Speed Selector Switch 3-7
Swing Control Lever 3-7
Turn Signal Lever and Windshield Wiper/Washer controls 3-7
Bubble Level Indicator 3-7
Cab Circulating Fan 3-7
Swing Brake Pedal 3-7
Telescope Control Foot Pedal 3-8
Windshield Wiper 3-8
Defroster Fan 3-8
Service Brake Foot Pedal 3-8
Spotlight (Optional) 3-8
Foot Throttle Pedal 3-8
Transmission Shift Lever 3-8
Circuit Breaker Panel 3-8
Pin Swing Lock Control (Pin Type) 3-8
Hoist Rotation Indicators 3-8
Main Hoist Control Lever 3-8
360 Degree Swing Lock Control (Positive Lock Type) 3-8
Main Hoist Speed Selector Switch 3-8
Engine and System Diagnostic Connector (Not Shown) 3-9
Luffing Jib Raise/Lower Switch 3-9
Luffing Jib On/Off Switch 3-9
Seat Switch (Not Shown) 3-9
Cab Dome Light 3-9
Fire Extinguisher 3-9
Boom Lift Control Lever 3-9
12 VDC Accessory Outlet 3-9
Auxiliary Hoist Control Lever 3-9
Horn 3-9
Right Turn Signal Indicator 3-9
Left Turn Signal Indicator 3-9
Rear Wheels Not Centered Indicator 3-9
Hoist 3rd Wrap Indicator (Optional W/CE) 3-9
Engine Stop Indicator 3-9
Engine Warning Indicator 3-10
Engine Service Indicator 3-10
Wait To Start Indicator 3-10
Low Brake Pressure Indicator 3-10
Transmission Service Indicator (XMSN) 3-10
Water In Fuel Indicator 3-10
Boom Not Sync Indicator 3-10
Throttle Mode Switch 3-10
Hourmeter (Not Shown) 3-10
Skylight Wiper (Not Shown) 3-10
Backup Alarm (Not Shown) 3-10
Armrest Switch (Not Shown) 3-10
Boom Telescope Mode A/B Select Switch 3-10
Low Steer Pressure Indicator (CE Option) 3-11
Electrical System Diagnostic Indicator 3-11
Operating Procedures 3-12
Pre-Starting Checks 3-12
Cold Weather Operation 3-12
Engine Operation 3-12
Crane Travel Operation 3-14
General Crane Operation 3-18
Using Your Load Chart 3-19
Crane Functions 3-19
SECTION 4 SET-UP AND INSTALLATION
General 4-1
Installing Cable On The Hoist 4-1
Cable Reeving 4-1
Standard Counterweight And Auxiliary Hoist Mounting Structure (Figure 4-3) 4-4
Removal 4-4
Installation 4-4
Heavy Counterweight Assembly And Auxiliary Hoist Mounting Structure (Figure 4-3) 4-5
Removal 4-5
Installation 4-8
Outrigger Removal and Installation 4-9
Bleed Valve Operation 4-9
Procedure 4-9
Removal 4-9
Installation 4-9
Erecting And Stowing The Swingaway Boom Extension 4-10
Erecting 4-10
Stowing 4-16
Connecting and Disconnecting the Hydraulic Boom Extension 4-17
Connecting 4-17
Disconnecting 4-17
Swingaway Mounting Adjustment 4-18
TABLE OF CONTENTS RT9000E
TOC-4
Boom Extension (With Inserts) 4-19
Assembly of Boom Extensions 4-19
Checklists For Rigging Work 4-20
Description of Rigging Work 4-23
Installing/Removing Two-Stage Swingaway Lattice Extension for Boom
Extension 4-24
Hydraulic Connection On the Boom Extension (If Unit Is Equipped With
Hydraulic Luffing Boom Extension) 4-25
Electrical Connection On the Boom Extension 4-25
Folding Out/In the Deflection Sheaves On the 8 m Sections 4-26
Positioning/Removing the Hoist Cable 4-27
SECTION 5 LUBRICATION
general 5-1
Arctic Conditions Below -18°C (0°F) 5-1
lubrication points 5-1
Surface Protection for Cylinder Rods 5-1
Wire Rope Lubrication 5-10
SECTION 6 MAINTENANCE CHECKLIST
General 6-1
Instructions 6-1

Customer Support: [email protected]

https://vimeo.com/874290002?share=copy

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V