Hitachi ZX870LCH-3 Crawler Excavator Parts Catalog P1JB-1-3 – Illustrated Parts Manual PDF

Description

Hitachi ZX870LCH-3 Crawler Excavator Parts Catalog P1JB-1-3 – Illustrated Parts Manual PDF

This Hitachi ZX870LCH-3 crawler excavator parts catalog, document number P1JB-1-3, is the complete illustrated parts reference for the ZX870LCH-3 and the 850/870 series machines built on the same platform. Every component group is presented as an exploded illustration followed by a part-number table listing item reference, part number, part name, quantity, and the serial-number range it applies to. With well over 700 pages of coverage, this is the reference a parts counter, workshop or owner needs to look up the correct component for a specific machine serial number rather than guessing at a generic listing.

File Details

• Manual Type: Illustrated Parts Catalog
• Brand: Hitachi
• Primary Model: ZX870LCH-3 Crawler Excavator
• Document Number: P1JB-1-3
• Language: English (Japanese section headings retained)
• Page Count: 708 pages
• File Format: PDF
• Serial Number Coverage: 020001 and up

Chapters Covered

The catalog is organised into eleven top-level groups, each subdivided into component sections:

• 0002 Upperstructure – Frame, counterweight and support, engine and engine support, engine oil filter piping, air cleaner parts and assembly, pre-cleaner, muffler, radiator support, radiator (early and late serial splits), radiator stay parts, reserve tank, air cooler piping, oil cooler parts and assembly, fan drive (radiator and oil cooler), fan valves (standard and reverse type), fuel cooler, fuel tank and parts, fuel piping, fuel feed pump, oil tank and parts, drain piping, pilot piping, swing device, control valve, pump device, drain piping (pump mission and pump), tail hose parts, suction piping (pump and oil tank), delivery piping, return piping (oil cooler and C/V), main piping 1-4, fan drive piping, control levers (front/swing STD, single switch, 3 switch), travel control lever, control pedal, lock lever, pilot piping 1 through 10, sensor block, console, console covers, right cover, monitor, radio, electric parts 1-6, relay parts, engine controller, engine stop switch, GPS parts, GSM mobile communication system, control unit, rear camera, front head lamps, rear head lamps, rotating beacon and support socket, sun visor, rain guard, motion alarm, overload alarm devices, battery cover, lubricator parts and box, door locks, electric grease gun, air-conditioner 1-3, air-con unit, compressor, duct (cab), rear box (air-con and 12V power supply), power unit 12V, cab variants (STD, EU, HD, NA, curved/tempered/laminated glass, cab 1-7), cab group, anchor less parts, window washer, rearview mirror, floor parts, floor plate, suspension seat (standard, with heater, air-suspension), heater seat parts, seat stands, floor mat, cover (door), tropical cover, anti-slip cover, cover frame, cover (center), step (center), cover (air cleaner), frame cover, engine cover, door (engine cover), radiator cover, duct (radiator and oil cooler), oil cooler cover, heat shields, center walks, right step, under covers.
• 0003 Undercarriage – Track center frame, swing bearing, track under cover, lubricate piping (swing bearing), track side frames (850/870H and 850LC/870LCH), travel device, front idler, adjuster (STD and LC), upper roller, lower roller (STD and LC), travel piping (STD and LC), travel piping covers, track links in 650mm, 750mm, 900mm and 1020mm gauge with STD and LC variants, track guards and full-length track guards (STD and LC).
• 0004 Backhoe Attachments – Booms (8.4m, 10m, H 8.4m, BE 7.1m), arms (3.7m, 4.4m, 5.4m, H 3.7m, BE 2.9m), buckets (3.5m3, 4.5m3 JIS 94), rock buckets (3.5m3, 3.7m3, 4.3m3 JIS 94), front piping for each boom variant, auto-lubrication system (basic machine, floor, 3-position floor, per-boom and per-arm sections), auto lubricate pump, and lubricate piping per boom/arm configuration.
• 0005 Loader Attachments – Loader frame, loader control valve, boom cylinder, loader front 1 and 2, loader main piping, loader pilot piping (main and floor), loader electric parts, electric parts (floor), loader pedal parts, loader front piping 1-6, loader lubricate piping (boom and arm), loader bucket 3.6m3 bottom dump rock, loader bucket 4.0m3 bottom dump.
• 0006 Breaker Parts – Main piping (breaker), filter (breaker), main piping (crusher), pilot piping 1 and 2 (breaker/crusher), control pedal (breaker/crusher), control pedal (accel), electric parts (breaker/crusher), relief valve parts (breaker/crusher), common piping (main), OKAFURU common piping, NPK common piping, frame parts (breaker/crusher), control valve parts (breaker/crusher), H boom 8.4m parts, BE boom 7.1m parts, H arm 3.7m parts, BE arm 2.9m parts, and breaker/crusher piping for the 8.4m boom, 7.1m boom, 3.7m arm and 2.9m arm.
• 0007 Quarry Specifications (Q.S) – Frame 870R/870LCR, reinforcement step, track side frame for 870R and 870LCR, travel piping covers, R boom 8.4m and boom parts, BER boom 7.1m and boom parts, R arm 3.7m, BER arm 2.9m, rock buckets 3.5m3, 3.7m3, 4.3m3 for the R/BER front combinations.
• 0008 Counterweight Removal Device – Counterweight for removal device, counterweight lifting device, control system, pilot piping, high-pressure piping.
• 0009 Others – Pilot piping (arm 5.4m).
• 0010 Tools and Spare Parts – Tools and spare parts.
• 0011 Name-plate – Name-plates in Japanese, English, general export, EU and Turkish versions.

Across these groups the catalog gives a complete exploded view of the machine: upper structure, undercarriage, both attachment families, and both special-application sections (breaker/crusher and quarry specification). Every illustration is keyed to a table so the reader can trace a single bushing, hose, cylinder or cover back to its exact part number, quantity per assembly, and the serial-number cut-off that applies. Multiple variant sections (STD, LC, H, R, BER, NA, EU, EU/NA, General Export, Turkish, Russian) mean the same catalog serves several machine configurations rather than a single generic bill of materials.

What This Parts Catalog Lets You Do

Because the ZX870LCH-3 catalog is broken out by serial number range, it is possible to identify the correct part for a specific machine rather than ordering a superseded component. Fan drive parts, radiator assemblies, fuel piping, pilot piping and fan valve components all change at defined serial cut-offs (for example 020001-020439 vs 020440-, 020001-020900 vs 020901-, 020001-020491 vs 020492-), and the catalog preserves those splits so the correct assembly can be matched to the machine on the floor.

Typical uses include:

• Identifying replacement hoses, fittings, seals and O-rings across the hydraulic, fuel and cooling circuits.
• Ordering undercarriage components – rollers, idlers, track links, track shoes and adjusters – for either STD or LC gauge.
• Cross-referencing attachment parts (boom, arm, bucket, linkage) for the 8.4m, 10m, H, BE and R configurations.
• Locating cab, HVAC, seat, monitor and electrical components by group number and item reference.
• Confirming name-plate content for specific market versions (Japanese, English, general export, EU, Turkish).
• Servicing the auto-lubrication system, breaker/crusher piping and quarry-specification reinforcement parts.

Why Use the Correct Parts Reference

On a machine of this size, ordering the wrong part is expensive in both cost and downtime. The P1JB-1-3 catalog gives the exact part number that corresponds to the serial number and configuration on the machine, and shows the surrounding assembly so the technician can see how the part fits before it arrives. Every section follows the same illustration-plus-table format, so the same lookup method works whether the part is a boom cylinder seal kit or a cab door hinge.

Delivery

The catalog is supplied as a single PDF file, delivered instantly after payment. There is no shipping and no waiting for a physical copy. The file can be viewed on any device that reads PDFs – desktop, laptop, tablet or phone – and individual pages can be printed for use at the machine or in the workshop. Because it is a digital file, it can be searched for a part number or group name directly, and a full copy can be kept on hand in the service truck or the parts office.

IMAGES PREVIEW