HUNK 125CC R (Dec., 2024) Parts Catalog – Illustrated Spare Parts Manual PDF

Description

The HUNK 125CC R (Dec., 2024) parts catalog is the illustrated spare-parts reference for this 125cc motorcycle, carrying a December 2024 revision date. Every assembly on the machine – cylinder head cover, cylinder and cylinder head, camshaft and valves, cam chain tensioner, clutch, left crankcase cover and A.C. generator, starter motor, crankshaft, oil pump, piston, transmission, kick starter, gearbox and carburettor, together with the frame, front fork, brakes, wheels, bodywork, lighting and decals – appears as an exploded drawing with numbered callouts that tie straight into a parts table giving the reference number, the part number, the description and the quantity required. It is a parts identification document rather than a repair guide, and it exists so that the right component gets ordered the first time.

What the HUNK 125CC R Parts Catalog Gives You

The catalog is organised into numbered groups, each covering one area of the motorcycle. Each group opens with a line drawing of the assembly with every individual component tagged by a callout number, and is followed by a table that matches those numbers to the actual part. That pairing is what makes the document practical: you can see exactly where a seal, shim, bolt, bearing or cover sits in the assembly and then look up its number in the same spread.

Part numbers are printed in full as they appear in the catalogue – groups such as 12310-AAN-B01, 16100-ACL-E00 and 31100-ACL-801 – along with the description and a “necessary” quantity column showing how many of each item the assembly takes. That quantity column matters when a single cover is held by four identical flange bolts or a head is located by two dowel guides, and it is the detail most often missing from a plain parts list.

File Details

• Manual type: Illustrated spare parts catalog
• Model: HUNK 125CC R
• Revision / date shown: Dec., 2024
• Language: Spanish, with part descriptions partly in English
• Pages: 187
• File format: PDF
• Brake variants referenced: ABS and CBS group listings

Chapters Covered

The engine and driveline groups run from E-1 through E-13A:

• E-1 Cylinder head cover – cover, gasket, cylinder head side covers, spark plug, inlet pipe, breather plate
• E-2 Cylinder and cylinder head – block, gasket, complete head, valve guides, stud bolts, side cover
• E-3 Camshaft and valves – camshaft, rocker arms and shafts, inlet and exhaust valves, inner and outer springs, retainers, cotters, adjusters
• E-4 Cam chain and tensioner – cam sprocket, silent chain, tensioner assembly, lifter, guide, tensioner gasket
• E-5 Right crankcase cover group
• E-6A Clutch – plates, discs, springs and hub assembly
• E-7A Left crankcase cover, A.C. generator assembly and self-start components
• E-7B Starter motor – motor unit, brush set, brush box kit, mounting bracket, packing, O-rings, speed sensor
• E-8 Crankshaft
• E-8A Oil pump assembly
• E-9 Crankshaft and piston – crank, connecting rod, piston, pin, rings, balancer drive and driven gears, dampers
• E-10 Transmission – mainshaft and countershaft gear sets, bearings, washers, bushes
• E-11 Kick starter
• E-12 Gearbox / shift mechanism
• E-13 Carburettor – gasket set, needle set, float set, float chamber set, throttle valve set, choke components, jets, pilot screw and O-rings
• E-13A Inlet insulator and pipe assembly

The chassis, body and electrical groups run from F-1 through F-30:

• F-1 Main headlight
• F-3A and F-3B Handlebar controls, cables, switches and rear-view mirrors
• F-4-ABS and F-4A-CBS Front brake master cylinder and lever assemblies
• F-6 Front fender assembly
• F-7-ABS and F-7-CBS Front fork – tubes, springs, damper rods, seals, bushes, caps
• F-8-ABS and F-8A-CBS Front caliper – seal set, pads, piston, hanger pin, bleeder screw
• F-9-ABS and F-9-CBS Front wheel – rim, tyre, hub, disc, bearings, spacers, axle
• F-10-ABS and F-10-CBS Rear brake panel – shoes, camshaft, springs, wear indicator, arm and adjuster
• F-11 Rear wheel hub group
• F-12 and F-12A Seat, side cowls, centre rear cowl and rear grips
• F-13 Fuel tank, petcock and related mountings
• F-14 Side covers – side cover boxes, shrouds, garnishes and lower covers
• F-16 Exhaust – muffler, exhaust pipe cover, gaskets, protector, mounting rubbers
• F-17 Foot pegs, brake pedal, gear change pedal and main stand
• F-18A-ABS Rear brake rod and switch group
• F-19 and F-19A Drive chain and rear swingarm – swingarm, pivot collar and bolt, chain slider, dust seals
• F-20 Rear cushion / shock absorber
• F-21, F-21A and F-21B Rear fender, number plate stay and licence light
• F-22 and F-22A Front and rear winkers with driver units
• F-23 and F-23A Tail light unit
• F-24-ABS and F-24-CBS Complete wiring harness
• F-25, F-25A and F-29A Frame body, horn, engine hangers, cable guides
• F-27 Stripes and marks – tank emblems, cowl stripes, side shroud stripes, hero marks, windscreen emblem
• F-28 Engine guard kit
• F-29 Women step assembly
• F-30 Caution sticker with QR code and E20 mark

Across all of these groups the catalogue delivers the same thing in a consistent format: a visual breakdown of how the assembly goes together, a numbered path from drawing to part number, and a stated quantity for every item. The closing parts index ties thousands of individual part numbers back to their group block, so a number found on a component or an old invoice can be traced to the correct section of the machine without searching page by page.

Why the Illustrated Format Matters

A flat list of part numbers tells you a part exists. An exploded drawing tells you where it belongs, what it sits next to, and what else has to come off before you can reach it. When a cylinder head cover gasket is listed alongside four flange bolts and two motor guide pins, or when a front fork group shows the damper rod, spring, oil seal and dust seal as separate line items, you know before ordering whether a job is a single-part replacement or a set of parts that should be renewed together.

Ordering HUNK 125CC R Spare Parts With Confidence

With this HUNK 125CC R parts catalog on hand you can identify and order the correct components for engine top-end work, clutch and transmission rebuilds, crankcase and generator cover replacement, starter motor service, carburettor overhaul, front fork and caliper rebuilds, wheel and bearing replacement, rear brake panel service, drive chain and swingarm work, and every bodywork, lighting and decal item on the machine. Using the printed part numbers and the stated quantities removes the guesswork that leads to wrong-fit components, returned orders and stripped threads from mismatched fasteners.

The catalog is delivered instantly as a PDF after payment, with no shipping and no waiting for a physical book. It opens on any phone, tablet, laptop or desktop, pages can be printed for the workshop bench, and individual group pages can be kept open beside the bike while you work.

IMAGES PREVIEW