International Tractors Solis 60N 75N 90N Parts Catalog PDF – Complete Illustrated Parts Manual

Description

International Tractors Ltd. Solis 60N, 75N & 90N Parts Catalogue

This is the complete parts catalogue for the SOLIS-60 N, SOLIS-75 N and SOLIS-90 N tractors built by International Tractors Ltd. It covers every assembly on the machine through 30 indexed component groups and 150+ sub-chapters, each presented as an exploded diagram with a matched parts table showing item numbers, part codes, descriptions and required quantities. Whether you are rebuilding a front axle, replacing a clutch pack, ordering a hydraulic pipe or chasing a small bracket, the illustration and the table tell you exactly what the part is, what it fits and how many you need.

File Details

• Manual type: Illustrated Parts Catalogue
• Brand: International Tractors Ltd. (Solis)
• Models covered: SOLIS-60 N, SOLIS-75 N, SOLIS-90 N
• Language: English
• Page count: 255 pages
• File format: PDF

Chapters Covered

• Silencer Assy
• Radiator, Coolant, Viscous Fan and Related Parts
• Air Cleaner Assy.
• Clutch Assy.
• Clutch Housing, Transmission Housing and Related Parts
• SMV Emblem and Related Parts
• Steering Wheel Assy and Related Parts
• ROPS Assy and Related Parts
• Rear View Mirror
• Rear Cover Assy and Related Parts
• Operating Sector and Related Parts
• Fender Assy and Related Parts
• Floor Assy and Related Parts
• Driver Seat
• Bonnet Assy and Related Parts
• Fuel Tank Assy and Its Related Parts
• Clutch Pedal, Brake Pedal Assy and Related Parts
• Front Axle BKT and Related Parts
• Front Axle Beam Assy and Related Parts
• Front Weight
• Three Point Linkages and Related Parts
• Throttle Assy and Related Parts
• Stickers
• Wheels and Tyres – Front
• Wheels and Tyres – Rear
• Rear Wheel Weights
• Cluster Assy.
• Electricals and Related Parts
• Accessories
• VERIM Cabin Details

Engine, Cooling and Air Intake Systems

The catalogue opens with the exhaust and silencing hardware: the exhaust elbow cover, exhaust pipe, clamps, under-hood silencer, gaskets and mounting bolts. The radiator section follows with the radiator assembly, rubber pads, mounting brackets, inlet and outlet hoses, hose clamps, radiator cap and the radiator frame. Fan coverage includes the fan assembly, spacer, V-belt and poly V-belt for the non-EU models, and a separate viscous fan assembly sub-chapter for EU models. The coolant assembly is broken out with its tank, pipes, clamps and hex flange screws, while air cleaner coverage is split by model: a dedicated assembly for the SOLIS-75 N, another for the SOLIS-60 N, and a third for the SOLIS-90 N including the intercooler assembly, connector pipes and charge-air hoses.

Clutch, Transmission and Final Drive

This is the largest block in the catalogue and spans both the Carraro 4WD transmission and the SOLIS-75 N 2WD transmission. Covered assemblies include the double clutch, clutch housing, C.A. shaft, dipstick, bell housing gasket, independent PTO, 4WD linkages and propeller shaft, differential lock, PTO lever, clutch control forks and bearings, clutch shafts, primary and secondary shafts, synchroniser kits, idle gears, bevel gear sets and the rear differential. The SOLIS-75 N 2WD transmission chapters mirror the same depth with their own part codes. Brakes, brake control, handbrake control, speed lever cover, outer gear shift, speed gear inner control, reverser inner control and range gears inner control all have their own exploded views.

Hydraulics, Steering and Linkage

Hydraulic coverage runs from the suction and delivery lines, hydraulic trailer brake lines and power steering lines through the power steering column, DCV assembly, MITA hydraulic rear cover, support top link, command group, cylinder assembly and powerlift control valve. The three-point linkage chapter lists the top link, lower link, lift link, stabiliser plates, drawbar and adjustment kits with their pins and linch pins.

Front Axle, Wheels and Chassis

For 4WD tractors the front axle block covers the axle housing, swivel housings, steering cylinders, bevel gear set, differential, double-U-joint, wheel hub, planetary carrier, bushes and seal rings, all tied to the Carraro front axle beam assembly codes. A separate SOLIS-75 N 2WD front axle area chapter covers the axle bracket, pivot pin, king pin assemblies, thrust bearing, stub axle, hub cap and tie rod. Front and rear wheels, tyres, tubes, rims, wheel weights and mounting nuts are itemised, as are the front weights and toe pin.

Bodywork, Cab, Electrical and Accessories

Sheet-metal and trim coverage includes the fender assemblies (painted and unpainted, LH and RH), fender side covers, rear flaps, tool box, floor assembly, rear floor, foot step, driver seat and seat mounting bracket. The bonnet chapter lists the bonnet assembly, front mesh, head lamp frames, bonnet lock, gas spring, beading and foam. Fuel tank, fuel pipes, water separator, brake and clutch pedal assembly, parking brake assembly and the SMV emblem round out the chassis. Electrical parts include the battery, plough lamp, horn, hazard switch, instrument cluster, starting switch, combination switch, PTO safety switch, tail lamps, head lights, relay, harness assemblies, solenoid shut-off valve, fuse box and revolving light. Bonnet stickers and various warning stickers are catalogued separately. Cabin coverage for the VERIM cabin lists interior parts, exterior parts, glasses, handles and interior locks, and mirrors.

What This Parts Catalogue Lets You Do

Every part number in this PDF is a direct link between the diagram and the component, so you can identify the correct item before placing an order instead of guessing from a photo. That matters most in the places where Solis tractors get rebuilt: the clutch and transmission stacks, the hydraulic lift and DCV, the Carraro front axle, the brake packs and the electrical harness. Getting the right part the first time avoids return shipping, avoids downtime and avoids the risk of fitting a near-match that fails under load.

IMAGES PREVIEW

Because the catalogue covers SOLIS-60 N, SOLIS-75 N and SOLIS-90 N in one document, workshops that service a mixed fleet can keep one reference open for all three. It is equally useful for a single owner rebuilding a front axle over a weekend. The file arrives as an instant PDF download after checkout – no shipping, no waiting. It opens on any laptop, tablet or phone, and every page can be printed or scaled for a workshop bench. Keep it on the workshop computer and pull it up the moment a part needs identifying.