JCB 1CX & 1CX HF Backhoe Loader Parts Book Issue 6 – PDF

Description

JCB 1CX & 1CX HF Backhoe Loader Parts Reference

The JCB 1CX & 1CX HF Backhoe Loader Parts Book Issue 6 – PDF is a detailed illustrated parts reference for 1CX and 1CX HF backhoe loaders from machine number M751600 onward. It is built around exploded component drawings, item numbers, part numbers, descriptions, change information, remarks, usage codes and quantities, allowing the reader to identify the components used in major machine assemblies and attachments. The book also separates model and build variations where the parts information changes, including engine coverage for 104.22 KR, 404C.22 HP and 404D-22 Tier 3 configurations.

File Details

• Manual type: Parts Book
• Brand: JCB
• Models: 1CX, 1CX HF Backhoe Loader
• Machine coverage: M751600 on
• Publication: 9800/6220P, Issue 6
• Language: English
• Page count: 291 pages
• File format: PDF

Illustrated Parts Identification

This JCB 1CX and 1CX HF parts book is arranged for practical parts lookup rather than repair instruction. The opening guidance explains how to identify the machine from its data plate, select the correct section, use the section index and then locate the required illustrated item. The ordering guidance calls for the machine model and serial number, page reference number and illustration item number. That structure is especially useful on a machine with many build changes because the correct page and item reference can be checked before a part is ordered.

Throughout the book, exploded drawings are paired with parts tables. These tables identify individual components and hardware such as pins, bushes, seals, bearings, hoses, fittings, fasteners, brackets, plates, valves, pumps, cylinders and complete assemblies. Many entries also show change points or model-specific remarks, so the book can be used to distinguish alternatives instead of relying on appearance alone.

Chapters Covered

• A – Attachments
  • General-purpose and light-duty shovels, tooth options and securing hardware
  • Grading, standard, sidecutter, 150 mm (6 in) and 230 mm (9 in) buckets
  • Quickhitch, bucket retention and backhoe attachment arrangements
  • Hammermaster breakers, earth drill and auger attachments
  • Fork carrier, industrial forks and manure/silage forks
  • Kerb grab, sweeper, SB60 collector, gutter brush and sprinkler system
  • Clam 6-in-1, high-tip and side-tip shovel assemblies
  • Trencher kits, toeplates and related attachment components
• B – Bodywork, Cab, Loader End
  • Chassis, rear frame, bonnet, side panels, counterweight and guards
  • Diesel fuel tank, hydraulic tank, toolbox, street pads and soundproofing
  • Cab and canopy assemblies, clear/tinted glazing, doors and windscreen items
  • Seat mountings, Milsco and Isringhausen seats, mats, mirrors and consoles
  • Loader arms, loader safety strut and optional loader arm level indicator
  • Backhoe boom, 7 ft 3 in and 8 ft 4 in dippers, narrow dipper and tipping links
  • Kingpost and carriage, pivot pins, boom lock and travel safety struts
  • Labels, decals, tool kit and homologation parts
• C – Electrics – Machine, Cab & Engine
  • Battery, battery isolator, reverse alarm, horn and wiring harnesses
  • Head, rear, working, hazard beacon and number-plate lighting
  • Alternator mountings, 55 amp and 65 amp alternator entries and starter motor
  • Cab heater, interior light, cooling fan, relays, sensors and switches
  • Windscreen and rear-screen wash/wipe components
• D – Controls – Machine, Engine & Steering
  • Excavator controls and auxiliary foot control
  • Hydraclamp and speed-restrictor controls
  • Excavator and loader valve lever locks
  • Hand and foot throttle control for Tier 1 and Tier 2 arrangements
• E – Hydraulics & Air Including Steering
  • Boom, bucket, dipper, slew, stabiliser, drive and loader hydraulic circuits
  • JCB +, JCB X and ISO control-pattern circuit arrangements where listed
  • High-flow, Hydraclamp, hydraulic-float and handheld attachment circuits
  • Loader auxiliary, lift-ram, shovel-ram and emergency-lower circuits
  • Main hydraulic, hydrostatic and gear pump assemblies
  • Hydraulic filters, excavator and loader control valves, relief and section valves
  • Hydraulic rams for boom, bucket, dipper, lift, shovel, stabiliser and attachments
• F – Axles, Wheels & Transmission
  • Front and rear axle assemblies
  • Wheel and tyre combinations including grassland, solid and wide-track arrangements
  • Central drive and chain-drive transmission components
• L – Engine 104.22, KR Build, to M807552
  • Engine block, crankshaft, pistons, con-rods and mountings
  • Cylinder head, rocker gear, timing components and flywheel housing
  • Induction, exhaust, cooling, lubrication and fuel systems
  • Injection equipment, lift pump and gasket sets
• M – Engine 404C.22, HP Build, from M807553
  • Engine block, crankshaft, pistons, cylinder head and valve-train components
  • Complete engine listings, fan and pulley arrangements and flywheel housing
  • Induction/exhaust, cooling, lubrication and fuel-system parts
  • Engine block heater and gasket sets
• N – Engine 404D-22, Tier 3
  • Block, crankshaft, pistons, connecting rods and engine mountings
  • Cylinder head, rocker assembly, timing, flywheel and fan drive
  • Air intake, exhaust, radiator, water pump and thermostat parts
  • Oil filter, oil pump, sump, fuel filter, injectors and fuel-injection pump
  • Engine block heater

Taken as a whole, the book gives a technician, owner or parts counter a visual path through the machine from attachment hardware and cab fittings to loader/backhoe structures, electrical equipment, controls, hydraulics, driveline and engine assemblies. The exploded views make it possible to see how parts relate within an assembly, while the adjacent tables provide the corresponding identification and quantity information. Because the indexes distinguish 1CX and 1CX HF content and show numerous serial or build change points inside individual sections, the machine identification information should be checked before selecting a part number.

Useful for Parts Matching and Repair Planning

The JCB 1CX & 1CX HF Backhoe Loader Parts Book Issue 6 – PDF is useful when dismantling an assembly, identifying missing or worn components, preparing a parts order, checking the hardware associated with a larger component, or planning a repair that requires multiple related items. Examples include loader-linkage pins and bushes, backhoe kingpost parts, cab glazing and mountings, hydraulic hose and valve components, attachment hardware, axle assemblies and engine subassemblies.

This is a parts book, not a workshop service manual. Its strength is component identification, exploded-view relationships, part-number lookup and applicability information; it does not replace step-by-step repair, adjustment or diagnostic procedures where those are required.

Get the Correct Parts Reference Ready for the Job

With the JCB 1CX & 1CX HF Backhoe Loader Parts Book Issue 6 – PDF available during maintenance or repair work, you can identify assemblies visually, trace illustration item numbers to parts listings and check model or build notes before ordering. Using the correct parts reference helps reduce uncertainty when several similar components or change points exist on the same machine family.

IMAGES PREVIEW

Your purchase is supplied as an instant PDF download after payment, with no physical shipping. The file can be opened on any device that supports PDF documents and pages can be printed when a paper reference is more convenient in the workshop.