John Deere 350GLC Excavator Operator’s Manual OMT289050 PDF

Description

John Deere 350GLC Excavator Operator’s Manual — OMT289050

This is the complete John Deere 350GLC Excavator Operator’s Manual, document number OMT289050, Issue A5, written in English. It runs 308 pages and covers the 350GLC excavator under three product identification number prefixes: 1FF350GX _ _E808001—, 1FF350GX _ _D808001— and 1FF350GX _ _C808001—. The procedures throughout are labelled by engine, so the manual stays usable whether your machine carries the 6090HT010, the 6090HT002 or the 6090HT006.

File Details

• Manual type: Operator’s Manual
• Brand: John Deere
• Model: 350GLC Excavator
• Document number: OMT289050
• Issue: A5 (English)
• Language: English
• Page count: 308
• File format: PDF

Chapters Covered

• Safety — General Precautions; Operating Precautions; Maintenance Precautions; Safety Signs
• Operation — Operator’s Station — Pedals, Levers and Panels; Switch Panel Functions; Left and Right Consoles; Cab Heater and Air Conditioner; AM/FM Radio; Fire Extinguisher Mounting Location; Alternative Exit Tool; Cab Dome Light; Opening and Closing Windows; Roof Exit Cover; Mechanical Suspension Seat; Air Suspension Seat; Pilot Control Lever Console Height
• Operation — Monitor Operation — Monitor Start-Up; Main Menu; Alarm List; Air Conditioner; Radio; Work Mode; Setting Menu (Date and Time, Attachment Name Input, Auto-Shutdown, Auto Exhaust Filter Cleaning, Sub Meter Selection, Rear View Camera Monitor, Display Item Selection, Brightness Adjustment, Language, Unit Selection, Main Menu Sequence Change); Information Menu (Operation, Maintenance, Troubleshooting, Monitoring)
• Operation — Operating the Machine — Before Starting Work; Operator’s Daily Machine Check; Engine Break-In Period; Starting the Engine; Cold Weather Start Aid; Cold Weather Warm-Up; Travel Pedals and Levers; Auxiliary Function Lever; Exhaust Filter Cleaning; Service ADVISOR Remote Software Delivery; Locking and Unlocking the Hydraulic Coupler; Control Lever Pattern Operation and Conversion; Operating in Water and Mud; Driving Up a Steep or Slippery Slope; Lifting; Lower Boom With Engine Stopped; Parking the Machine; Loading and Unloading for Transport; Towing Machine; Lifting the Machine
• Maintenance — Machine — Diesel Fuel Specifications; Lubricity and Handling of Diesel Fuel; Biodiesel Fuel; Low Sulfur Diesel Fuel Conditioner; Testing Diesel Fuel; Fuel Filters; Cold Weather Operation; Alternative and Synthetic Lubricants; Mixing of Lubricants; Lubricant Storage; John Deere Break-In Plus Engine Oil; Diesel Engine Oil by emission tier; Engine Oil and Filter Service Intervals; Oil Filters; Hydraulic Oil; Swing Gear Case and Travel Gear Case Oils; Pump Drive Gear Case Oil; Grease; Diesel Engine Coolant; Coolant Extender; Supplemental Coolant Additives; Testing Diesel Engine Coolant; Disposing of Coolant
• Maintenance — Periodic Maintenance — Service Machine at Specified Intervals; Check the Hour Meter; Engine Identification; Prepare Machine for Maintenance; Open Access Doors and Engine Cover; Fuel Tank; Hydraulic Breaker and Crusher Attachments; Fluid Analysis Program; Service Intervals and Required Parts
• Maintenance — Every 10 Hours or Daily — Check Engine Oil Level; Check Engine Coolant Level; Check Hydraulic Tank Oil Level; Lubricate Hydraulic Coupler
• Maintenance — Every 50 Hours or Weekly — Drain Water and Sediment from Fuel Tank Sump; Drain Primary Fuel Filter and Water Separator; Drain Final and Auxiliary Fuel Filters
• Maintenance — Every 100 Hours — Lubricate Working Tool Pivots; Inspect and Re-Torque Track Hardware
• Maintenance — Every 250 Hours — Swing, Travel and Pump Drive Gear Case Oil Levels; Drain Hydraulic Tank Sediment; Check and Adjust Air Conditioner Belt; Check Battery Electrolyte Level and Terminals; Take Engine Oil Sample
• Maintenance — Every 500 Hours — Lubricate Front End Pin Joints; Lubricate Swing Bearing and Swing Bearing Gear; Drain and Refill Engine Oil and Replace Filter; Replace Primary, Final and Auxiliary Fuel Filters; Check Air Intake Hoses; Clean Cab Fresh Air and Cab Recirculating Air Filters; Take Fluid Samples
• Maintenance — Every 1000 Hours — Drain and Refill Swing Gear Case Oil; Replace Hydraulic Tank Oil Filter; Replace Pilot Oil Filter; Inspect Serpentine Belt; Drain and Refill Pump Drive Gear Case Oil; Remove and Clean Crankcase Ventilation Hose; Replace Air Cleaner Elements and Dust Unloader Valve; Check Coolant
• Maintenance — Every 2000, 4000, 5000 and 6000 Hours — Check and Adjust Engine Valve Lash; Drain and Refill Travel Gear Case Oil; Replace Engine Crankshaft Dampener; Drain and Refill Hydraulic Tank Oil; Replace Hydraulic Tank Vent Cap Filter; Drain Cooling System and Cooling System Fill and Deaeration Procedure
• Miscellaneous — Machine — Bleed Fuel System; Clean Radiator, Oil Cooler, Charge Air Cooler and Fuel Cooler; Alternator and Regulator Precautions; Battery Handling, Charging, Booster Batteries and Replacement; Fluid Sampling Test Ports; Welding On Machine; Clean the Machine Regularly; Adding 12-Volt Accessories; JDLink Machine Monitoring System; Replacing Fuses; Replacing Bucket Teeth; Removing the Bucket; Track Sag; Track Shoe Hardware; Bolt and Screw Torque Values
• Miscellaneous — Operational Checkout — Key Switch Off / Engine Off Checks; Key Switch On / Engine Off Checks; Key Switch On / Engine On Checks, including swing, travel, dig, regenerative valve and cycle-time checks
• Miscellaneous — Troubleshooting — Engine, Hydraulic System and Electrical System symptom charts
• Miscellaneous — Storage — Prepare Machine for Storage; Monthly Storage Procedure
• Miscellaneous — Machine Numbers — PIN, engine serial numbers, travel motor, swing motor, hydraulic coupler and hydraulic pump serial numbers
• Miscellaneous — Specifications — Engine Specifications; Drain and Refill Capacities; Machine Specifications; Working Ranges; Lift Capacity charts for the 2.10 m, 2.67 m, 3.20 m and 4.0 m arm configurations

Read together, these chapters turn the manual into a single working reference for the 350GLC. The operation half explains every switch, dial and menu on the machine — including the full monitor tree, work mode selection, air conditioner and radio settings, the exhaust filter cleaning screens and the Service ADVISOR Remote software update prompts. The maintenance half replaces guesswork with a fixed service calendar tied to hour-meter intervals, each step keyed to the correct engine variant and paired with torque values, capacities and fluid specifications. The miscellaneous section then closes the loop with an operational checkout that walks through every system function, troubleshooting charts for engine, hydraulic and electrical faults, storage procedures and full machine specifications including working ranges and lift capacity tables.

Maintenance Intervals That Match the Machine

Because the 350GLC is offered with three different engines, the manual separates the parts and service tables where it matters — the 6090HT010 engine runs an exhaust filter with its own auto, parked and service cleaning routines and ash removal requirements, while the 6090HT002 and 6090HT006 engines use a different fuel filter arrangement, serpentine belt inspection and air conditioner belt adjustment. Having these differences laid out in the same document means you can order the right filters and set the right intervals without cross-checking a second source.

Why This Manual Belongs With the Machine

An excavator this size depends on correct procedures — the wrong hydraulic oil, a missed swing bearing grease interval or a machine parked with the wrong boom angle can turn a routine day into a repair bill. This operator’s manual gives you the machine-specific fluid specifications, torque values and capacity figures the 350GLC actually calls for, along with the daily and periodic checks that keep wear predictable. The operational checkout section is especially useful when a function feels off: it tells you what normal looks like for swing speed, cycle times, drift limits and track tracking before you start pulling components apart.

IMAGES PREVIEW

Delivery is instant. The PDF downloads immediately after payment, there is no shipping and no waiting for a physical book, and the file opens on a laptop, tablet or phone. Print the pages you need for the shop or keep the whole 308-page document on a device in the cab — either way, the John Deere 350GLC Excavator Operator’s Manual stays available whenever a service interval comes due or a control needs a second look.