John Deere CP690 Cotton Picker Parts Catalog PC12380 August 2015 – PDF Download

Description

John Deere CP690 Cotton Picker Parts Catalog PC12380

This is the complete John Deere CP690 Cotton Picker Parts Catalog with document number PC12380, published August 2015. It covers the CP690 Cotton Picker with Round Module Builder (RMB) built from 2014 onward. Every section of the machine is broken down into illustrated assemblies with John Deere part numbers, quantities, and applicable serial number ranges — from the 6135HN004 and 6135HN005 engines through to the accumulator, decals, and everything in between.

If you maintain, repair, or restore a CP690, this is the reference that puts the correct part number in your hand before you order. No more guessing at a component based on a blurry photo or a second-hand description. You see exactly how each assembly goes together, what fasteners and seals are involved, and which parts are replaced as a kit versus individually.

File Details

• Manual Type: Parts Catalog
• Brand: John Deere
• Model: CP690 Cotton Picker (RMB)
• Document Number: PC12380
• Publication Date: August 2015 (Aug-15)
• Language: English
• File Format: PDF
• Page Count: Approximately 1376 pages
• Manufactured: 2014 onward

Chapters Covered

The catalog follows John Deere’s standard sectional breakdown, with each section containing illustrated assemblies, parts lists, and serial number applicability notes. The main chapters are:

• 20 Engine — Covers both 6135HN004 (RE545341) and 6135HN005 (RE553785) engines with rocker arm covers, valve covers, oil filler neck, crankshaft pulleys, crankshaft oil seal and housing, flywheel, electronic unit injectors, air intake, oil pan, water pump, thermostat covers and thermostats, fan drive, fan belt, engine coolant heater, exhaust manifold, ventilating system, starting motor, alternator, fuel filter, fuel transfer pump, thermostat housing, engine oil dipstick, starting aid, tachometer drive sensors, sensors, cylinder block with liners, crankshaft and bearings, connecting rods and pistons, rocker arm and shaft assemblies, valve actuating mechanism, oil pump, cylinder head, auxiliary drive hardware, air intake turbo, oil filter and oil cooler, exhaust filter and diesel particulate filter, alternator mounting, turbocharger, damper, dosing system, air compressor mounting, oil pressure switch, timing gear cover, wiring harness, exhaust gas recirculation, and lift straps.
• 25 Gear Case — Gear and bearing assembly, housing assembly, electrical connector cavity plug, power take-off assembly, clutch, and fan drive.
• 30 Engine Auxiliaries, Fuel Tank and Air System — Gear case and pump drive, engine mounting brackets, engine supports and breather hoses, engine air intake, alternator and A/C compressor, engine fan, auxiliary trash fan, shroud and support, engine cooling package, rotary screen and drive, radiator hoses, external air scoop door, fuel tank hoses, fuel tank (1362.7 L / 360 U.S. gal.), engine starting aid, muffler and engine exhaust, mounting parts for after-treatment device, supply and dosing for after-treatment device, diesel exhaust fluid tank, surge tank and hoses.
• 40 Electrical System — Engine controllers (T2/T3 and FT4), vehicle controllers, cab vehicle controller, drive train controller, modular telematics gateway controller, steering controller, battery and cables, power module wiring harness, work light, tether switch, video observation system, monitors, chassis wiring harnesses (six sections plus front sections), auxiliary power harness, engine wiring harness (T2 and FT4), mountings for engine harness, handler wiring harness, ProDrive transmission wiring harness, accumulator wiring harness, feeder wiring harness, infrared transmitter and receiver sensors, accumulator position switch, sensors and mounting parts for feeder harness, fuel sender wiring harness, baler wiring harness, halogen light sensor and position arm, Harvest Doc wiring harness, cotton mass flow sensors and brackets, wrap system wiring harness, wrap system lights and switches, LED light bar and mirrors, halogen light bar and mirrors, handler wiring harness with tail lights, tail lights, reverse tail lamp, cab wiring harnesses, cab roof lamp wiring harness, bulkhead wiring harness, CommandCenter wiring harness, armrest wiring harness, steering column wiring harness, automatic temperature control wiring harness, working lights and mirrors, halogen cab lights, cab roof flood lights, RFID reader, revolving beacon light and wiring harness.
• 50 Power Train — Final drive, final drive housing and bearings, ProDrive transmission, housing and countershaft, differential, hydro cover and park brake housing, brake, clutch and drive shaft, housing cover, valve block and accumulator.
• 60 Steering and Brakes — Steering column (upper and lower), steering valve, brake valve with pedals and supports, steering hydraulic lines, brake hydraulic lines, service brake linkage rods, steering and propel pump supply hoses and fittings.
• 70 Hydraulic System — Rockshaft cylinders hoses and fittings, rockshaft cylinder, gate cylinders hoses and fittings, accumulator extension cylinders hoses and fittings, wrap hoist cylinders hoses and fittings, wrap hoist cylinder (LH and RH), wrap floor cylinders hoses and fittings, handler cylinders hoses and fittings, picking unit lift hydraulic hoses and fittings, picking unit lift cylinder (95.25 x 45 mm), baler latch cylinder hoses and fittings, baler latch cylinder, auxiliary hydraulic oil cooler hoses (T2 and FT4), auxiliary hydraulic pump, auxiliary hydraulic pump hoses and fittings, pump drive gearbox supply hoses, platform valve hoses and fittings, platform control valve, hydraulic filter for ProDrive transmission, hydraulic oil cooler lines and hoses for transmission, ProDrive transmission pump and hoses, hydraulic pump stack, propel drive hydraulic pump 180 cm³, baler drive pump 85 cm³, baler drive pump hoses, round module builder control valve hoses and fittings, round module builder control valve, chassis valve fittings and hoses (T2/T3 and standard), chassis control valve, Vari-Cool fan control hose, compactor auger motor hoses and fittings, hydraulic motor for front and rear axle, row unit drive motor, round module builder drive motor and hoses, beater feeder and meter drive motors and hoses, meter roll drive motor, hydraulic reservoir, hydraulic reservoir drain valve, hydraulic reservoir filter, pump drive gearbox filter, pump drive gearbox cooler supply lines, picking unit pump filter and hoses, picking unit pump oil lines and fittings, picking unit drive pumps, picking unit drive hoses and fittings, picking unit motor hoses, picking unit motor hoses for VRS, round module builder wrap hoses and fittings, grease tank, grease manifold hoses, grease pump mounting and hose, grease coupler, grease system hoses and fittings.
• 80 Frame and Sheet Metal — Main frame, main frame supports, frame extension supports (LH and RH), platform handrail and ladder, cab roof platform and light brackets, platform extension (LH), handrails (LH), tool box and support, handrail for frame extension (RH), engine mounting frame, engine mounting frame vertical supports, main frame top shields, main frame rear shields, main frame side shields, engine frame rear panels, fixed panels (LH and RH), cooling module rear panels, battery panels, cooling module lower panels, engine door upper panels, removable side panels, cotton fan and transmission lower access doors, engine lower access doors, side shield tethering, side decal panels, fire extinguisher and supports, mud scraper, wheel shields.
• 85 Axles and Wheels — Axle shield and SMV emblem, axle housing, axle swivel housing and steering cylinder, bevel gear set, differential, axle double U-joint, wheel hub, final reduction, wheel angle sensor, axle reduction housing, axle reduction shaft and gears, axle extensions (30-inch and 40-inch with 2-inch wheel spacer, 32-inch with 2-inch spacer, 36-inch with 2-inch spacer, 38-inch with 2-inch spacer, 38-inch with 8-inch spacer, 40-inch with 8-inch spacer), pivot pin for power axle, front wheels, rear wheels, rear axle locking blocks.
• 90 Operator’s Station — Cab supports and bezel, GPS receiver bracket, cab frame, cab interior panels seals and floor mat, cab rear side and floor panels, cab glass and door, windshield wiper, cab roof, overhead console, overhead light console, radio speaker and antenna, radio, radio opening cover, armrest control panel, display mounting bracket, cornerpost display, horn, air conditioning and heater housing (upper and lower), cab air filter and housing, heater ducts, heater and air conditioning system, A/C hoses (T2/T3 and FT4), operator’s seat, instructional seat, operator’s seat pivot and adjust assemblies, operator’s seat air suspension (lower and upper), operator’s seat parts, operator’s seat cushion armrest and mountings, instructional seat belt.
• 100 Picking Unit Lift — Header lift frame, lift arm for header lift frame (RH and LH), header lift frame mounting pin, lift frame extensions (LH narrow RH and wide RH), center lift frame extension.
• 110 Pro-16 Picking Unit — Complete picking unit and non-skid mat, wiring harness and mounting parts, tether switch, upper inspection doors and seals, lower inspection doors, upper housing, bottom frame, pressure door post cabinet, drum side unit post cabinet, pressure doors, pressure door tensioner, pressure door adjusters, pressure door extension, latches, latches with CE shielding, row unit hanger mounting, row unit hanger offset, cabinet grid bars, lubrication manifold and fittings, moistener system pressure lines, moistener system flush lines, spindle moistener column, air duct, shield, rear door support, door support structure, doffer gear drive and adjuster, doffer high speed, doffer bottom retention, vine cutter attachment, doffer vine cutter, doffer drive and adjuster gears with fine adjustment, doffer plug sensor, drum cover, drum slip clutch and idler gears, picker bar, drum drive gears, drum head, drum head retention, height sensor and linkage (LH and RH), mechanical row guidance probe, Row-Trak guide, row guidance sensor, crop divider frame, crop lifter, crop divider, scraping plates and attachments, stalklifter rods, cross shaft and universal joints, power shaft restraint chain, reduction gear case, gear cases for rows 1, 2 and 5, 3, 1 and 4, 6, lubricator transfer pump attachment, lubrication transfer pump.
• 120 Pro-12 VRS Picking Unit — Picking unit attachments for 45 cm rows (rows 1, 2 and 5, 3, 4, 6), non-skid mats, wiring harness and sensors, tether switch and doffer shield, upper inspection doors (38 cm and 45 cm), plugs, lower inspection doors (38 cm and 45 cm), upper housing with high speed, cabinet extensions (38 cm and 45 cm), floor and stationary knife support (38 cm and 45 cm), pressure door supports, pressure doors and tensioners, pressure door adjusters, pressure door extensions, panel for row 1, row unit hanger mounting, grid bars (38 cm and 45 cm), lubrication manifold and fittings, solution and lube filters, spindle moistener column, moistener system flush and pressure lines, drum side unit posts, door supports, doffer gear drive and adjuster, doffers, doffer bottom retention, vine cutter attachments, doffer vine cutter, drum head, drum slip clutch and idler gears, picker bar, drum and rotary cutter drive, picker drum heads, drum head retention, height sensor and linkage, mechanical row guidance probes (38 cm and 45 cm), high speed mechanical row guidance probes, row guidance sensor, crop divider frame, crop guides and shields (Row-Trak and standard), crop dividers, scraping plates, cross shaft and universal joints, power shaft restraint chain, rotary feedertube and cutter, rotary cutter clutch, rotary feedertube shielding, rotary feeder clutch, kickershaft and drive, rotary feeder shaft and clutch, reduction gear case (RH and LH), gear cases for row 1 and 4, 2 and 5, 3 and 6, lubricator transfer pump, lubrication transfer pump.
• 130 Solution System — Moistener tank, moistener tank hoses and fittings, electric auxiliary water pump, auxiliary water system, Quick Fill plumbing, solution pump, water pump, solution manifold, pressure valve assembly.
• 150 Air System — Cotton fan, air manifolds, fan drive belt sheave and idler, cotton doors and offset suction duct, suction door ducts for 6 row 30/32 inch VRS, 6 row 36 inch Pro-16/VRS, 6 row 38/40 inch Pro-16/VRS, air duct hoses, air duct tubes, row spacing conversion attachments and kits, upper and lower unit ducts for 36-inch and wide row spacing, round module builder ramp air duct.
• 155 Accumulator — Hood grate, hood panels, hood rear panel and handrail, rear panels, side panels (LH and RH), front panels, extension platform, extension panels, extension lift, compactor auger.
• 160 Round Module Builder (RMB) — Front rollers, gate rollers, belts, front frame, motor mount and rockshaft pivot, latch, shields, gate, gate belt guides, gate link and turnbuckle, rockshaft, feeder frame panels, feeder belt rollers and mounting parts, meter roller and mounting parts, beater roller and mounting parts, wrap box, SMV emblem, wrap box rollers, wrap roll lift linkage, wrap roll drive, wrap floor, wrap guide and rods, ramp trash curtain, handler handrail and ladder, handler frame, wrap handle storage box, handler extension, RMB pivot, handler wrap load arms.
• 170 Decals — Text decals, text-free decals, RMB service decals, model and stripe decals, operator information decals, Pro-16 text-free decals, Pro-16 decal, Pro-16 safety decal, Pro-16 text-free safety decal, Pro-12 decal, Pro-12 text-free safety decal.

This is not a generic maintenance guide. It is the parts identification backbone for the entire CP690 — every section is an illustrated assembly breakdown tied to the machine’s serial number breaks. For each illustration you get a keyed parts table listing the John Deere part number, the part name, the quantity required, and the serial number range where that part applies. That means you can order the exact component your machine was built with rather than a superseded or wrong-spec part.

The catalog includes the full alphabetical index and sectional pictorial index, making it possible to find a part by assembly name, by section number, or by part number. Whether you are tracking down a single O-ring for a hydraulic cylinder or rebuilding an entire picking unit gear case, the exploded views show you how the assembly is put together and what comes with each service kit.

What This Parts Catalog Enables

With the John Deere CP690 Cotton Picker Parts Catalog PC12380, you can:

• Identify the correct part number for any component on the CP690, from engine internals to cab trim.
• Confirm whether a part is used on early or late serial number machines before ordering.
• See exactly what is included in a kit or service assembly versus what must be ordered separately.
• Locate fasteners, seals, O-rings, clamps, and fittings by assembly rather than hunting through a hardware store.
• Reference exploded diagrams when disassembling or reassembling complex systems like the Pro-16 or Pro-12 VRS picking units.
• Verify part numbers for the 6135HN004 and 6135HN005 engine variants.
• Find decals, labels, and safety signs by their correct part numbers.
• Cross-reference between the alphabetical index and the sectional pictorial index for fast lookup.

IMAGES PREVIEW

For anyone maintaining a CP690 Cotton Picker — whether a dealer technician, a large farm operation, or an independent repair shop — having the correct parts catalog is the difference between a machine that sits waiting for the wrong part and one that goes back to the field on schedule. Ordering a seal that does not fit, or a gear that belongs to a different serial number break, costs time and money. This catalog removes that uncertainty.

How the Catalog Is Organized

The document opens with an introduction and product identification section, followed by a user guide covering SI units of measure, bolt and cap screw strength identification, serial number listing information, illustration conventions, and John Deere remanufactured component information. From there it moves into the alphabetical index and the sectional pictorial index, then into the numbered sections from 20 Engine through 170 Decals.

Each section follows the same format: one or more illustration pages with keyed callouts, followed by a parts table listing the key number, part number, part name, quantity, engine or axle serial number applicability, and remarks. Illustrations are line drawings rather than photographs, which makes the assembly structure clearer than a photo would.

The catalog also includes a numerical index at the back, so if you already have a part number in hand you can find every page where that part appears across the entire machine. That is particularly useful when a single part — a specific bolt, clamp, or O-ring — is used in multiple assemblies.

Who This Manual Is For

This CP690 Cotton Picker parts catalog is written for the people who keep these machines running:

• Dealer parts counter staff who need to look up the right number quickly and confirm serial number applicability.
• Service technicians who need to understand how an assembly goes together before they start pulling it apart.
• Farm maintenance shops that stock their own parts and want to order accurately the first time.
• Independent repair shops that work on John Deere cotton pickers and need the same parts reference the dealer uses.
• Equipment owners who want to be informed when discussing repairs or ordering parts for their own machine.

The level of detail is deep enough for a full component rebuild and specific enough for a single fastener replacement. This is not a simplified owner’s guide — it is the full parts identification catalog for the CP690.

Get the Complete CP690 Parts Catalog — Instant PDF Download

The John Deere CP690 Cotton Picker Parts Catalog PC12380 gives you the complete parts breakdown for every major system on the machine — engine, drivetrain, hydraulics, electrical, picking units, round module builder, and all supporting assemblies. It is the reference you need to order the right part, understand how an assembly is built, and keep a CP690 working the way it should.

You get an instant PDF download after checkout. No shipping, no waiting for a disc in the mail. The file works on any device — laptop, tablet, or phone — and you can print the pages you need for the shop. Keep it on a phone in the field, on a computer at the parts counter, or printed in a binder at the workbench. The same catalog, wherever you need it.