Parts List Manual for John Deere CTS Combine & 900 Series Platform PDF

Description

JOHN DEERE CTS COMBINE WITH 900 SERIES PLATFORM PARTS CATALOG MANUAL – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

JOHN DEERE CTS COMBINE WITH 900 SERIES PLATFORM PARTS CATALOG MANUAL – PDF DOWNLOAD

JOHN DEERE CTS (RICE) COMBINE SERIAL NO. (645501- )
JOHN DEERE CTS (SMALL GRAIN) COMBINE SERIAL NO. (660401- )

FOR 900 SERIES PLATFORM PARTS INFORMATION, REFER TO JOHN DEERE 900 SERIES PLATFORM PARTS
CATALOG – PC-2104.
FOR 40 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 40 SERIES CORN HEAD PARTS
CATALOG – PC-1223.
FOR 50A SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50A SERIES ROW-CROP HEAD
PARTS CATALOG – PC-1747.
FOR THREE-ROLLER BELT PICKUP PARTS INFORMATION, REFER TO JOHN DEERE THREE-ROLLER BELT PICKUP
PARTS CATALOG – PC-2210.
FOR 918 AND 920 DRAPER PARTS INFORMATION, REFER TO JOHN DEERE 918 AND 920 DRAPER PLATFORMS
PARTS CATALOG – PC-2212.
FOR 90 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 90 SERIES CORN HEAD PARTS
CATALOG – PC-2404.

IMPORTANT:
THIS PARTS CATALOG CONTAINS PARTS INFORMATION FOR THE 4420 COMBINE. MACHINE VINTAGE
IS DETERMINED BY THE COMBINE SERIAL NUMBER OR THE PRODUCT IDENTIFICATION NUMBER (PIN).
IT IS IMPORTANT THAT THE CORRECT NUMBERS BE USED WHEN ORDERING PARTS.
DIRECTION ARROW:
ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. “RIGHT-HAND” AND “LEFTHAND”
SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.
BOX-ENCLOSED ILLUSTRATIONS:
A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A
SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

TABLE OF CONTENTS:

JOHN DEERE CTS COMBINE WITH 900 SERIES PLATFORM PARTS CATALOG MANUAL – PDF DOWNLOAD

SECTION 10 – GENERAL INFORMATION
SECTION 20 – ENGINE FAN, INTERCOOLER AND SCREENS
SECTION 26 – 6076 ENGINE (HH030)
SECTION 30 – FUEL AND AIR
SECTION 40 – ELECTRICAL
SECTION 50 – POWER TRAIN
SECTION 60 – STEERING AND BRAKES
SECTION 70 – HYDRAULICS
SECTION 80 – SEPARATOR SHELL
SECTION 90 – OPERATOR’S STATION
SECTION 110 – FEEDER HOUSE
SECTION 120 – THRESHING AND SEPARATION
SECTION 121 – DRIVES
SECTION 125 – RESIDUE DISPOSAL
SECTION 130 – CLEAN GRAIN ELEVATOR, GRAIN TANK AND UNLOADING AUGER
SECTION 160 – DIAL-A-MATIC HEADER HEIGHT CONTROL
SECTION 170 – DECALS, BELTS AND CHAINS
SECTION 180 – NUMERICAL INDEX

4E21 A/C COMPRESSOR 4D16 AIR SEAT SUSPENSION KITS
(650401- ) R134A 90 – 90 (665401- ) 90 – 58
4E22 A/C COMPRESSOR COVER 4D18 AIR SEAT SUSPENSION KITS
(650401- ) R134A 90 – 91 (665401- ) 90 – 60
4E21 A/C COMPRESSOR DIODE 2C5 AIR SEAT WIRING HARNESS
(650401- ) R134A 90 – 90 (660401- ) 40 – 20
4E21 A/C COMPRESSOR MANIFOLD 4D12 AIR SUSPENSION KITS, SEAT
(650401- ) R134A 90 – 90 (665401- ) 90 – 54
4E22 A/C COMPRESSOR PULLEY 4D14 AIR SUSPENSION KITS, SEAT
(650401- ) R134A 90 – 91 (665401- ) 90 – 56
4E21 A/C COMPRESSOR SEAL 4D16 AIR SUSPENSION KITS, SEAT
(650401- ) R134A 90 – 90 (665401- ) 90 – 58
4E24 A/C COMPRESSOR SEAL KIT 4D18 AIR SUSPENSION KITS, SEAT
(650401- ) R134A 90 – 93 (665401- ) 90 – 60
1B22 A/C CONDENSER 20 – 16 4D10 AIR SUSPENSION, SEAT
3H1 A/C CONDENSER AND OIL COOLER 70 – 96 (660401- ) 90 – 52
3I9 ACCESS DOOR, REAR HOOD AND STOP 80 – 26 1E23 ALTERNATOR ADJUSTING STRAP 26 – 76
3H23 ACCESS PLATFORM AND STEP, ENGINE 80 – 16 2E1 ALTERNATOR AND VOLTAGE REGULATOR (95 AMP
3J1 ACCESS SHIELD, SERVICE, L H 80 – 42 ), BOSCH 40 – 64
3I23 ACCESS SHIELD, SERVICE, R H 80 – 40 2E3 ALTERNATOR MOUNTING 40 – 66
3E21 ACCUMULATOR AND MOUNTING, ONE GALLON 1E23 ALTERNATOR SUPPORT STRAP 26 – 76
(655401- ) 70 – 40 2D24 ALTERNATOR, SHEAVE AND BELT – BOSCH 40 – 63
3E17 ACCUMULATOR AND MOUNTING, ONE HALF 2C17 ANTENNA, SPEAKERS AND RADIO 40 – 32
GALLON, SINGLE 70 – 36 5G15 ARM, LOCKOUT, DUAL-RANGE 121 – 38
3D7 ACCUMULATOR PRESSURE GAUGE AND WIRING 3I3 ARM, REAR LADDER LANDING LATCH 80 – 20
HARNESS 70 – 2 2I6 ARM, STEERING 50 – 52
3E19 ACCUMULATOR, ONE-HALF GALLON DUAL AND 1E19 ARMATURE (DENSO) (12V F4) 26 – 72
MOUNTING ( -655400) 70 – 38 3F18 ARMATURE, SOLENOID CONTROL VALVE KIT FOR
4D6 ADJUST FORE-AND-AFT, SEAT 90 – 48 AUGER SWING 70 – 62
3C16 ADJUSTABLE REAR AXLE 60 – 33 4D24 ARMREST (L H ) 90 – 66
3C19 ADJUSTABLE REAR AXLE STEERING TIE RODS 60 – 36 4D22 ARMREST ADJUSTING MECHANISM, (R H ) 90 – 64
4D8 ADJUSTER, CAB SEAT HEIGHT 90 – 50 2B24 ARMREST CONTROL PANEL 40 – 14
5G23 ADJUSTING BRACKET, CYLINDER DRIVE, 2B22 ARMREST WIRING HARNESS 40 – 12
DUAL-RANGE 121 – 46 4D20 ARMREST WITH GLOVE BOX (R H ) 90 – 62
1F12 AIR CLEANER AND INTAKE TUBES 30 – 12 5D13 ARMS, FRAME, PRECLEANER CHAFFER 120 – 56
2C9 AIR CONDITIONER AND HEATER SWITCH 40 – 24 1D3 ARMS, ROCKER 26 – 26
2C7 AIR CONDITIONER PRESSURIZER FAN KIT 1C9 ASSEMBLY, COMPLETE BLOCK
(640401-650400) 40 – 22 (ESN 500000- ) 26 – 6
2C5 AIR CONDITIONER WIRING HARNESS 2H11 ASSEMBLY, HYDROSTATIC DRIVE PISTON 50 – 32
(660401- ) 40 – 20 3G1 ASSEMBLY, SIX STACK SOLENOID CONTROL
2C3 AIR CONDITIONER, HEATER WIRING HARNESS VALVE (660401- ) 70 – 72
( -660400) 40 – 18 3B23 ATTENUATOR,UPPER, HYDRAULIC STEERING
4C16 AIR CONDITIONING AND HEATER DUCTS 90 – 33 HOSES 60 – 16
4E6 AIR CONDITIONING AND HEATER HOUSING 6H18 AUGER BELTS 170 – 2
FILTERS 90 – 74 6E2 AUGER CHAIN TIGHTENER, LOWER TAILINGS 125 – 70
4E16 AIR CONDITIONING COMPRESSOR 5C19 AUGER CLEANOUT DOOR, SHOE GRAIN SUPPLY,
( -650400) R-12 90 – 84 HANDLES AND LATCHES 120 – 36
4E10 AIR CONDITIONING SYSTEM 90 – 78 6E8 AUGER DRIVE SHIELD, UPPER TAILINGS 125 – 76
4E12 AIR CONDITIONING SYSTEM, COMPRESSOR 6E10 AUGER DRIVE SHIELD, UPPER TAILINGS 125 – 78
( -650400) R-12 90 – 80 3I17 AUGER DRIVE SHIELDS (R-H SIDE) 80 – 34
4E14 AIR CONDITIONING SYSTEM, COMPRESSOR 6E4 AUGER DRIVE TIGHTENER, LOWER TAILINGS 125 – 72
(650401- ) R134A 90 – 82 6E8 AUGER DRIVE, UPPER TAILINGS 125 – 76
4E8 AIR CONDITIONING/HEATER AND PRESSURIZER 6E10 AUGER DRIVE, UPPER TAILINGS 125 – 78
FAN 90 – 76 6F9 AUGER HOUSING, LOADING, UPPER CLEAN
3H21 AIR DEFLECTOR, AIR DUCT, ENGINE COMPARTM GRAIN 130 – 12
ENT 80 – 14 6F11 AUGER HOUSING, LOADING, UPPER CLEAN
3H21 AIR DUCT AND AIR DEFLECTOR, ENGINE COMPA GRAIN (660401- ) 130 – 14
RTMENT 80 – 14 2D21 AUGER LIGHT, UNLOADING, GRAIN TANK 40 – 60
4C15 AIR FILTER AND HOUSING, CAB 90 – 32 6G5 AUGER LOWER GEAR CASE, VERTICAL 130 – 34
1B22 AIR INTERCOOLER 20 – 16 2D7 AUGER SENSOR AND WIRING HARNESS,
4D10 AIR SEAT SUSPENSION UNLOADING (660401- ) 40 – 46
(660401- ) 90 – 52 3F17 AUGER SWING SOLENOID CONTROL VALVE 70 – 61
4D12 AIR SEAT SUSPENSION KITS 3F18 AUGER SWING, ARMATURE, SOLENOID CONTROL
(665401- ) 90 – 54 VALVE KIT 70 – 62
10-10 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=10
1A12
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
3F16 AUGER SWING, SOLENOID CONTROL VALVE 1C20 BEARINGS, MAIN (6076) 26 – 17
DOUBLE PILOTED 70 – 60 2H21 BEARINGS, SEALS, SHAFT AND OUTER COVER
3G11 AUGER SWING, UNLOADING, CYLINDER AND CAM LOBE MOTOR 50 – 42
MOUNTING 70 – 82 2G18 BEARINGS, TRANSMISSION INPUT SHAFT 50 – 14
3G13 AUGER SWING, UNLOADING, CYLINDER AND 2G20 BEARINGS, TRANSMISSION PINION SHAFT 50 – 16
MOUNTING (650401-655551) 70 – 84 6H21 BEATER BELTS SHEAVES 170 – 5
6G11 AUGER SWIVEL SUPPORT AND BRACES 130 – 40 5C17 BEATER COVER 120 – 34
6G9 AUGER SWIVEL, HORIZONTAL UNLOADING 130 – 38 5C11 BEATER DRIVE BELT IDLER 120 – 28
6F9 AUGER TRANSITION HOUSING 130 – 12 5C13 BEATER DRIVE CONVERSION, DUAL SPEED
6D21 AUGER TROUGH, LOWER TAILINGS 125 – 64 700/400 RPM 120 – 30
2D7 AUGER WIRING HARNESS, UNLOADING 5C15 BEATER GEARCASE AND SHEAVE 120 – 32
(660401- ) 40 – 46 5C9 BEATER SHAFT AND DRIVE BELT 120 – 26
6E23 AUGER, CLEAN GRAIN LOWER AND HINGED DOOR 130 – 2 5C7 BEATER, STRIPPER 120 – 24
6H3 AUGER, CROSS, COVERS AND CHANNEL 130 – 56 5C5 BEATER, STRIPPER, DRIVE IDLER 120 – 22
6G22 AUGER, HORIZONTAL UNLOADING 6H6 BELT GUIDE, UNLOADING AUGER DRIVE 130 – 60
(17- AND 20-FT ) 130 – 50 5H17 BELT PICKUP/REEL CHARGE PUMP MOUNTING
6G15 AUGER, HORIZONTAL UNLOADING, DRIVE AND SHEAVE 121 – 64
GEARCASE 130 – 44 4H11 BELT, FAN, DUST, LH SIDE FEEDER
6G13 AUGER, HORIZONTAL UNLOADING, HUB SUPPORT HOUSE-RETROFIT INSTALLATION 110 – 54
AND SWITCH 130 – 42 4D3 BELT, OPERATOR’S SEAT 90 – 44
6F13 AUGER, LOADING, CLEAN GRAIN 130 – 16 4D4 BELT, SEAT – PASSENGER SEAT 90 – 45
6F15 AUGER, LOADING, CLEAN GRAIN FOLD 4D5 BELT, SEAT – RETROFIT KIT
(660401- ) 130 – 18 (MACHINES PRIOR TO 1996 MODEL YEAR) 90 – 46
6H19 AUGER, LOWER TAILINGS, BELTS 170 – 3 6H19 BELTS, AIR CONDITIONER COMPRESSOR 170 – 3
6D19 AUGER, LOWER TAILINGS, SHAFT AND 6H18 BELTS, AUGER 170 – 2
TIGHTENER 125 – 62 6H21 BELTS, BEATER 170 – 5
6H4 AUGER, UNLOADING, COUNTERSHAFT DRIVE 130 – 58 6H19 BELTS, CLEAN GRAIN ELEVATOR 170 – 3
6H6 AUGER, UNLOADING, DRIVE BELT GUIDE 130 – 60 6H18 BELTS, CONVEYOR FEEDER 170 – 2
6H9 AUGER, UNLOADING, LUBE BANK 130 – 64 6H19 BELTS, COOLING FAN 170 – 3
6E8 AUGER, UPPER TAILINGS 125 – 76 6H19 BELTS, CYLINDER DRIVE 170 – 3
6E10 AUGER, UPPER TAILINGS 125 – 78 6H19 BELTS, DRIVE, CYLINDER INTERMEDIATE 170 – 3
6E6 AUGER, UPPER TAILINGS, HOUSING AND 6H20 BELTS, FAN, CLEANING 170 – 4
PADDLE ASSEMBLY 125 – 74 6H18 BELTS, FEEDER CONVEYOR 170 – 2
6G7 AUGER, VERTICAL UNLOADING AND CHARGE 6H20 BELTS, FEEDER HOUSE 170 – 4
HOUSING 130 – 36 6H20 BELTS, HEADER AND REEL 170 – 4
6H1 AUGERS, GRAIN TANK CROSS 130 – 54 6H21 BELTS, LOWER TAILINGS AUGER 170 – 5
5C22 AUGERS, SHOE GRAIN SUPPLY AND HOUSING 120 – 40 6H19 BELTS, LOWER TAINLINGS AUGER 170 – 3
5C20 AUGERS, SUPPLY, SHOE GRAIN AND HOUSING 120 – 38 6H19 BELTS, ROTARY SCREEN 170 – 3
2B14 AUX FIELD LIGHT SWITCH, OPTIONAL 40 – 4 6H20 BELTS, STRAW CHOPPER 170 – 4
2B20 AUXILIARY FIELD LIGHTING 40 – 10 6H20 BELTS, STRAW SPREADER 170 – 4
2G9 AXLE SPACERS 50 – 5 6H20 BELTS, UNLOADING AUGERS 170 – 4
2H2 AXLE, FINAL DRIVE 50 – 23 6H21 BELTS, UNLOADING SYSTEM 170 – 5
3C17 AXLE, FIXED REAR 6H21 BELTS, UPPER TAILINGS AUGER 170 – 5
(GRAIN) (655542- ) 60 – 34 6H18 BELTS, WALKER 170 – 2
2G8 AXLE, FRONT 50 – 4 1C9 BLOCK ASSEMBLY, COMPLETE
3C16 AXLE, REAR, ADJUSTABLE 60 – 33 (ESN 500000- ) 26 – 6
3C23 AXLE, REAR, SPINDLES 60 – 40 1C13 BLOCK, SHORT
3C15 AXLE, REAR, SUPPORT 60 – 32 (WITH HEAD BOLTS) 26 – 10
1C11 BLOCK, SHORT (WITHOUT HEAD BOLTS) 26 – 8
1D1 BOLTS, CYLINDER HEAD (6076) 26 – 24
B 2E1 BOSCH ALTERNATOR AND VOLTAGE REGULATOR 40 – 64
2D24 BOSCH ALTERNATOR, SHEAVE AND BELT 40 – 63
4D1 BACKREST AND SEAT, OPERATOR’S 90 – 42 4C7 BOX, TOOL
2F10 BACKSHAFT SPEED SENSOR, FEEDER HOUSE 40 – 98 (660401- ) 90 – 24
6H9 BANK, LUBE, UNLOADING AUGER 130 – 64 6G11 BRACES AND SWIVEL SUPPORT, AUGER 130 – 40
2D19 BATTERIES, CABLE AND HOLDDOWN 40 – 58 3B20 BRACKET, BRAKE CABLE SUPPORT
2E19 BEACON LIGHTS, REVOLVING (EXPORT ONLY) 40 – 82 (645510- ) 60 – 13
5E16 BEARING AND LUBE LINES, MODULE FRONT 120 – 84 2F2 BRACKET, REEL SPEED MOTOR 40 – 90
2H1 BEARING CAP, FINAL DRIVE 50 – 22 5C3 BRACKETS, CONCAVE INDICATOR AND CABLE 120 – 20
6G24 BEARING PLATE, CROSS AUGER, L H 130 – 52 2C10 BRACKETS, LOW SHAFT SPEED SENSORS 40 – 25
2I1 BEARING, COVER AND QUILL 50 – 47 3F25 BRACKETS, SOLENOID CONTROL VALVE 70 – 70
1C20 BEARING, THRUST (6076) 26 – 17 3B20 BRAKE CABLE SUPPORT BRACKET
1D12 BEARING, WATER PUMP 26 – 38 (645510- ) 60 – 13
6D25 BEARINGS, CHAIN AND SPROCKETS, TAILINGS 3B13 BRAKE LINES, MASTER CYLINDER AND
ELEVATOR CONVEYOR 125 – 68 RESERVOIR 60 – 6
2H2 BEARINGS, FINAL DRIVE 50 – 23 3B15 BRAKE MASTER CYLINDER 60 – 8
2H3 BEARINGS, FINAL DRIVE 50 – 24 3B9 BRAKE PEDAL AND SEAL, PARKING 60 – 2
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-11
PN=11
1A13
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
3B11 BRAKE PEDALS 60 – 4 2E17 CENTRAL ELECTRONICS MODULE AND CIRCUIT
3B17 BRAKE SHOES AND DRUM 60 – 10 BOARDS 40 – 80
3B19 BRAKE SLAVE CYLINDER 60 – 12 6C20 CHAFF SPREADER (BELT TYPE) FRAME,
2E9 BREAKERS, CIRCUIT, ENGINE COMPARTMENT 40 – 72 SHIELDS AND HANDLES ( -650400) 125 – 38
2E6 BREAKERS, CIRCUIT, ENGINE COMPARTMENT 6C24 CHAFF SPREADER (BELT TYPE) PAN AND SEALS
( -660400) 40 – 69 ( -650400) 125 – 42
2E7 BREAKERS, CIRCUIT, ENGINE COMPARTMENT 6D15 CHAFF SPREADER (DUAL MOTOR) HOSES AND
(660401- ) 40 – 70 LINES (650401- ) 125 – 58
1C24 BUSHING, CAMSHAFT 26 – 21 6D1 CHAFF SPREADER (DUAL MOTOR) PAN, WINGS
1C7 BUSHING, CAMSHAFT (6076) 26 – 4 AND SEALS (650401- ) 125 – 44
1D9 BYPASS VALVE, OIL FILTER 26 – 34 6C22 CHAFF SPREADER (DUAL MOTOR) SHIELDS
AND HANDLES (650401- ) 125 – 40
6D5 CHAFF SPREADER CONTROL, CHECK VALVE,
C ROD AND KNOB 125 – 48
6C16 CHAFF SPREADER DISC (BELT TYPE)
4C15 CAB AIR FILTER AND HOUSING 90 – 32 ( -650400) 125 – 34
2B11 CAB DOME LIGHT 40 – 1 6C18 CHAFF SPREADER DISC (DUAL MOTOR)
4B20 CAB DOOR AND GLASS 90 – 12 (650401- ) 125 – 36
4B18 CAB DOOR LATCH 90 – 10 6D13 CHAFF SPREADER HOSES, LINES AND MOTOR
4B22 CAB FRAME AND SUPPORT 90 – 14 ( -650400) 125 – 56
4F3 CAB HARDWARE KIT 90 – 96 6D9 CHAFF SPREADER LINES AND FITTINGS 125 – 52
4B16 CAB INTERIOR TRIM PANELS 90 – 8 6D11 CHAFF SPREADER LINES, HOSES, VALVE AND
4C11 CAB L H LANDING AND MIRROR PUMP 125 – 54
(650401- ) 90 – 28 3D14 CHAFF SPREADER MOTOR
4C9 CAB LANDING AND MIRROR (L H ) (EATON) (655929- ) 70 – 9
( -650400) 90 – 26 6D3 CHAFF SPREADER MOUNTING SUPPORT 125 – 46
4C13 CAB LANDING AND MIRROR (R H ) 90 – 30 6D17 CHAFF SPREADER PUMP 125 – 60
4B10 CAB PANELS AND FLOOR MAT 90 – 2 5H3 CHAFFER DRIVE, CONVEYOR AUGERS AND SIEVE 121 – 50
2B16 CAB POST INSTRUMENT PANEL 40 – 6 5D15 CHAFFER ELEMENT 120 – 58
4C17 CAB POST INSTRUMENT PANEL 90 – 34 5D17 CHAFFER ELEMENT 120 – 60
4F5 CAB POST INSTRUMENT PANEL LH (EXPORT 5D19 CHAFFER EXTENSION ELEMENT 120 – 62
ONLY) 90 – 98 5D21 CHAFFER FRAME 120 – 64
4B14 CAB REAR AND SIDE SEALS 90 – 6 5D13 CHAFFER FRAME ARMS, PRECLEANER 120 – 56
4B24 CAB ROOF AND SUPPORTS 90 – 16 5D9 CHAFFER FRAME, PRECLEANER 120 – 52
2B18 CAB ROOF LIGHTS 40 – 8 5D5 CHAFFER, PRECLEANING
4D8 CAB SEAT HEIGHT ADJUSTER 90 – 50 ( -655400) 120 – 48
4B12 CAB SOUND DEADENING, FOAM AND SEALS 90 – 4 5D7 CHAFFER, PRECLEANING (655401- ) 120 – 50
2B12 CAB WIRING HARNESS 40 – 2 6E2 CHAIN TIGHTENER, LOWER TAILINGS AUGER 125 – 70
2G12 CABLE AND SWITCH, HYDROSTATIC DRIVE LEVE 4G16 CHAIN, IDLER SHAFT AND DRUM, FEEDER
R 50 – 8 CONVEYOR 110 – 34
5C3 CABLE, CONCAVE INDICATOR, AND BRACKETS 120 – 20 6D25 CHAIN, SPROCKETS AND BEARINGS, TAILINGS
2G14 CABLE, HYDROSTATIC DRIVE CONTROL 50 – 10 ELEVATOR CONVEYOR 125 – 68
2D19 CABLES, BATTERY 40 – 58 6H3 CHANNEL AND COVERS, CROSS AUGER 130 – 56
2H20 CAM LOBE MOTOR 50 – 41 6G7 CHARGE HOUSING, VERTICAL UNLOADING
2I2 CAM, CARRIER AND PISTONS 50 – 48 AUGER 130 – 36
2G24 CAM, SHIFTER, TRANSMISSION AND 3F3 CHARGE PRESSURE HOSE 70 – 46
DIFFERENTIAL 50 – 20 5H17 CHARGE PUMP MOUNTING AND SHEAVE, REEL/
1C24 CAMSHAFT 26 – 21 BELT PICKUP 121 – 64
1C24 CAMSHAFT BUSHING 26 – 21 2H12 CHARGE PUMP, HYDROSTATIC DRIVE 50 – 33
1C7 CAMSHAFT BUSHING (6076) 26 – 4 6D5 CHECK VALVE, ROD, KNOB AND CONTROL,
1C24 CAMSHAFT FOLLOWER 26 – 21 CHAFF SPREADER 125 – 48
1D3 CAMSHAFT FOLLOWER 26 – 26 6G5 CHUTE, GRAIN TANK CLEAN OUT CHUTE 130 – 34
1C24 CAMSHAFT GEAR 26 – 21 2B16 CIRCUIT BOARD, COMBINE DATA CENTER 40 – 6
2H1 CAP, BEARING, FINAL DRIVE 50 – 22 4C17 CIRCUIT BOARD, COMBINE DATA CENTER 90 – 34
6G5 CAP, GRAIN TANK CLEAN OUT CHUTE 130 – 34 2E17 CIRCUIT BOARDS, CENTRAL ELECTRONICS MODU
1C7 CAPS, MAIN BEARING 26 – 4 LE 40 – 80
2I4 CAPS, YOKE AND PIVOTS 50 – 50 2E9 CIRCUIT BREAKER RELAYS 40 – 72
2I2 CARRIER, PISTONS AND CAM 50 – 48 2E6 CIRCUIT BREAKER RELAYS
2J17 CASE DRAIN HYDRAULIC LINES, FOUR WHEEL ( -660400) 40 – 69
DRIVE 50 – 88 2E7 CIRCUIT BREAKER RELAYS
2B16 CDC (COMBINE DATA CENTER) 40 – 6 (660401- ) 40 – 70
4C17 CDC (COMBINE DATA CENTER) 90 – 34 2E9 CIRCUIT BREAKERS, ENGINE COMPARTMENT 40 – 72
1D22 CENTER HOUSING, TURBOCHARGER 2E6 CIRCUIT BREAKERS, ENGINE COMPARTMENT
(AIRESEARCH) 26 – 50 ( -660400) 40 – 69
1D23 CENTER HOUSING, TURBOCHARGER (SCHWITZER) 26 – 51 2E7 CIRCUIT BREAKERS, ENGINE COMPARTMENT
2C23 CENTER, L H MAIN WIRING HARNESS 40 – 38 (660401- ) 40 – 70
10-12 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=12
1A14
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
6F18 CLEAN GRAIN ELEVATOR DRIVE TIGHTENER AND 5B20 CONCAVE, RASP BAR AND GRATE 120 – 12
IDLER 130 – 22 5C1 CONCAVE, SPIKE TOOTH 120 – 18
6F16 CLEAN GRAIN ELEVATOR GEARCASE AND 5B24 CONCAVE, SPIKE-TOOTH 120 – 16
SHEAVE 130 – 20 1B22 CONDENSER, A/C 20 – 16
6F13 CLEAN GRAIN LOADING AUGER 130 – 16 3H1 CONDENSER, A/C 70 – 96
6F15 CLEAN GRAIN LOADING AUGER, FOLD 1C18 CONNECTING RODS (6076) 26 – 15
(660401- ) 130 – 18 2F22 CONNECTORS AND TERMINALS, SUPPLEMENTARY 40 – 110
6E23 CLEAN GRAIN LOWER AUGER AND HINGED DOOR 130 – 2 1E13 CONNECTORS, ELECTRICAL, WEATHERPACK
6F1 CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR (6076) 26 – 66
CHAIN 130 – 4 1E7 CONNECTORS, FUEL INJECTION PUMP HOUSING
6F3 CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR (6076HH030, HH034) 26 – 60
CHAIN 130 – 6 2E11 CONNECTORS, LOWER HARNESS, 6076 ENGINE
6G5 CLEAN OUT CHUTE, GRAIN TANK 130 – 34 ENGINE 40 – 74
5D3 CLEANING FAN INTAKE SHIELDS 120 – 46 2E13 CONNECTORS, UPPER HARNESS, 6076 ENGINE 40 – 76
5C24 CLEANING FANS AND SHROUDS 120 – 42 2F14 CONNECTORS, WEATHERPACK 40 – 102
5D1 CLEANING FANS AND SHROUDS 120 – 44 2B14 CONSOLE PANEL, OVERHEAD 40 – 4
5H5 CLEANING SHOE AND CONVEYOR AUGER PIVOT 4G7 CONTOUR MASTER – FEEDER HOUSE FRAME,
ARM DRIVE TIGHTENER 121 – 52 TILT BEAM & CLOSURE PLATES (660401- ) 110 – 24
4G7 CLOSURE PLATES, FEEDER HOUSE – CONTOUR 4H7 CONTOUR MASTER DRIVESHAFT
MASTER (660401- ) 110 – 24 (660401- ) 110 – 50
4E16 CLUTCH, COMPRESSOR 3E11 CONTOUR MASTER HYDRAULIC HOSES, L H SIDE
( -650400) R-12 90 – 84 (OPTIONAL) (660401- ) 70 – 30
4E17 CLUTCH, COMPRESSOR 4G11 CONTOUR MASTER LOCKOUT ADAPTER KIT (BELT
( -650400) R-12 90 – 85 PU & 4R CORN HEADS) (660401- ) 110 – 28
5G7 CLUTCH, HEADER ELECTROMAGNETIC 121 – 30 3F11 CONTOUR MASTER SOLENOID CONTROL RELIEF
4G22 CLUTCH, SLIP, FEEDER HOUSE 110 – 40 VALVE 70 – 54
4E16 COIL, COMPRESSOR 3F21 CONTOUR MASTER SOLENOID CONTROL VALVE
( -650400) R-12 90 – 84 (660401- ) 70 – 66
1E19 COIL, FIELD WINDING (12V F4) 26 – 72 3G17 CONTOUR MASTER TILT CYLINDER
1F8 COLD WEATHER STARTING AID (660401- ) 70 – 88
( -655614) 30 – 8 3G19 CONTOUR MASTER TILT CYLINDER HOSES AND
1F10 COLD WEATHER STARTING AID FITTINGS (660401- ) 70 – 90
(655615- ) 30 – 10 4G5 CONTOUR MASTER, FEEDER HOUSE SHELL,
3C3 COLUMN, STEERING (LOWER) 60 – 20 WEAR PLATES AND SEALS (660401- ) 110 – 22
3C1 COLUMN, STEERING (UPPER) 60 – 18 4G9 CONTOUR MASTER, LOCKOUT ASSEMBLY
4E2 COLUMN, STEERING (UPPER) 90 – 70 (OPTIONAL) (660401- ) 110 – 26
2B16 COMBINE DATA CENTER 40 – 6 2G14 CONTROL CABLE, HYDROSTATIC DRIVE 50 – 10
4C17 COMBINE DATA CENTER 90 – 34 2B24 CONTROL PANEL, ARMREST 40 – 14
3H17 COMPARTMENT, ENGINE 80 – 10 3F11 CONTROL RELIEF VALVE MODULE, SOLENOID 70 – 54
3H19 COMPARTMENT, ENGINE 80 – 12 1E5 CONTROL UNIT, ELECTRONIC (ROBERT BOSCH)
3H21 COMPARTMENT, ENGINE, AIR DUCT AND AIR DE (6076HH030, HH034) (LATE DESIGN) 26 – 58
FLECTOR 80 – 14 2I8 CONTROL VALVE ( -655400) 50 – 54
1C9 COMPLETE BLOCK ASSEMBLY 2I9 CONTROL VALVE (655401- ) 50 – 55
(ESN 500000- ) 26 – 6 3F18 CONTROL VALVE KIT, ARMATURE, SOLENOID,
4E17 COMPRESSOR CLUTCH AUGER SWING 70 – 62
( -650400) R-12 90 – 85 3G1 CONTROL VALVE MODULE, SIX STACK SOLENOID
4E16 COMPRESSOR COIL ASSEMBLY & MOUNTINGS (660401- ) 70 – 72
( -650400) R-12 90 – 84 2I10 CONTROL VALVE SOLENOID 50 – 56
4E18 COMPRESSOR HARDWARE KIT 6D7 CONTROL VALVE, FLOW, REEL DRIVE 125 – 50
( -650400) R-12 90 – 86 2H15 CONTROL VALVE, HYDROSTATIC DRIVE,
4E23 COMPRESSOR HARDWARE KIT DISPLACEMENT 50 – 36
(650401- ) R134A 90 – 92 3F21 CONTROL VALVE, SOLENOID – CONTOUR MASTER
4E19 COMPRESSOR PARTS (660401- ) 70 – 66
( -650400) R-12 90 – 88 3F25 CONTROL VALVE, SOLENOID, BRACKETS 70 – 70
4E17 COMPRESSOR SERVICE VALVES 3H5 CONTROL VALVE, SOLENOID, ENGINE GEARCASE
( -650400) R-12 90 – 85 PRESSURE REGULATOR 70 – 100
4E12 COMPRESSOR, AIR CONDITION SYSTEM 3F19 CONTROL VALVE, SOLENOID, REEL FORE/AFT
( -650400) R-12 90 – 80 (650401- ) 70 – 64
4E16 COMPRESSOR, AIR CONDITIONING 6D5 CONTROL, CHECK VALVE, ROD AND KNOB,
( -650400) R-12 90 – 84 CHAFF SPREADER 125 – 48
6H19 COMPRESSOR, AIR CONDITIONING BELTS 170 – 3 2F6 CONVENIENCE OUTLET
4E14 COMPRESSOR, AIR CONDITIONING SYSTEM (660401- ) 40 – 94
(650401- ) R134A 90 – 82 3D16 CONVERSION PARTS, HUDRAULIC, 200 SERIES
4E16 COMPRESSOR, CLUTCH PULLEY CUTTING PLATFORM 70 – 11
( -650400) R-12 90 – 84 5H5 CONVEYOR AUGER AND CLEANING SHOE PIVOT
2D18 CONCAVE ADJUSTING MOTOR 40 – 57 ARM DRIVE TIGHTENER 121 – 52
5C3 CONCAVE INDICATOR, CABLE AND BRACKETS 120 – 20 6H18 CONVEYOR AUGER BELTS, 170 – 2
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-13
PN=13
1A15
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
5H3 CONVEYOR AUGERS, SIEVE AND CHAFFER DRIVE 121 – 50 5G23 CYLINDER DRIVE ADJUSTING BRACKET,
6F1 CONVEYOR CHAIN AND ELEVATOR, CLEAN GRAIN DUAL-RANGE 121 – 46
LOWER 130 – 4 5G13 CYLINDER DRIVE GEARCASE, DUAL-RANGE 121 – 36
6F3 CONVEYOR CHAIN AND ELEVATOR, CLEAN GRAIN 5G19 CYLINDER DRIVE INTERMEDIATE SHAFT
LOWER 130 – 6 MOUNTING, DUAL-RANGE 121 – 42
4G16 CONVEYOR IDLER SHAFT, DRUM AND CHAIN, 5G21 CYLINDER DRIVE INTERMEDIATE SHEAVE,
FEEDER 110 – 34 DUAL-RANGE 121 – 44
1D17 COOLANT HEATER, ENGINE (6076) 26 – 44 5G17 CYLINDER DRIVE TIGHTENER, DUAL-RANGE 121 – 40
1F18 COOLANT RECOVERY TANK 30 – 18 5G12 CYLINDER DRIVE, SINGLE RANGE 121 – 35
1D9 COOLER AND OIL FILTER HOUSING 26 – 34 5G11 CYLINDER DRIVE, SLOW SPEED 121 – 34
1D9 COOLER, ENGINE OIL 26 – 34 1D1 CYLINDER HEAD (6076) 26 – 24
1F11 COOLER, FUEL 30 – 11 1D1 CYLINDER HEAD BOLTS (6076) 26 – 24
3H1 COOLER, OIL, 70 – 96 1D1 CYLINDER HEAD GASKET (6076) 26 – 24
6H19 COOLING FAN BELTS 170 – 3 1E15 CYLINDER HEAD GASKET KIT (6076) 26 – 68
3J7 CORNER SHEET AND DOOR, FRONT, L H 80 – 48 1C18 CYLINDER LINERS (6076) 26 – 15
3J3 CORNER SHEET, R H , FRONT 80 – 44 3F14 CYLINDER SPEED AND REEL LIFT, SOLENOID
3J5 CORNER SHEET, REAR, L H 80 – 46 CONTROL VALVE 70 – 58
5H1 COUNTERSHAFT DRIVE, SECONDARY 121 – 48 3F9 CYLINDER SPEED HYDRAULIC LINES AND HOSES 70 – 52
6H4 COUNTERSHAFT DRIVE, UNLOADING AUGER 130 – 58 3B19 CYLINDER, BRAKE SLAVE 60 – 12
5G3 COUNTERSHAFT GEARCASE, PRIMARY 121 – 26 3B15 CYLINDER, BRAKE, MASTER 60 – 8
5G5 COUNTERSHAFT, PRIMARY, GEARCASE 121 – 28 3G9 CYLINDER, DRIVE, GRAIN TANK UNLOADING 70 – 80
1B19 COUPLING WITH HUB, ENGINE GEARCASE 20 – 13 3D24 CYLINDER, HEADER LIFT, HYDRAULIC 70 – 19
5F3 COUPLING, GEARBOX AND SHAFT, MODULE 121 – 2 3G7 CYLINDER, HYDRAULIC, UNLOADING AUGER
1E18 COVER STARTER SOLENOID (DENSO) 26 – 71 SWING, LINES AND HOSES 70 – 78
5C17 COVER, BEATER 120 – 34 3C13 CYLINDER, STEERING (4-WHEEL DRIVE) 60 – 30
4E22 COVER, COMPRESSOR A/C 5B18 CYLINDER, THRESHING, RASP BAR 120 – 10
(650401- ) R134A 90 – 91 5B22 CYLINDER, THRESHING, SPIKE TOOTH 120 – 14
3H17 COVER, ENGINE 80 – 10 3G17 CYLINDER, TILT – CONTOUR MASTER
2H5 COVER, FRONT, HYDROSTATIC DRIVE PUMP 50 – 26 (660401- ) 70 – 88
2G24 COVER, HOUSING, TRANSMISSION AND 3G19 CYLINDER, TILT, HOSES AND FITTINGS –
DIFFERENTIAL 50 – 20 CONTOUR MASTER (660401- ) 70 – 90
2H8 COVER, HYDROSTATIC DRIVE PUMP 50 – 29 3G15 CYLINDER, UNLOADING AUGER SWING
1C23 COVER, INJECTION PUMP ACCESS (6076) 26 – 20 HYDRAULIC (655552- ) 70 – 86
2H23 COVER, INNER 50 – 44 3B11 CYLINDERS, MASTER 60 – 4
2I1 COVER, QUILL AND BEARING 50 – 47
1D4 COVER, ROCKER ARM 26 – 27
5B9 COVER, THRESHING CYLINDER 120 – 1 D
1C23 COVER, TIMING GEAR (6076) 26 – 20
6H3 COVERS AND CHANNEL, CROSS AUGER 130 – 56 1C19 DAMPER KEY (6076) 26 – 16
5E14 COVERS AND FRAME, MODULE 120 – 82 1E17 DAMPER, CRANKSHAFT, NO PULLEY GROOVES 26 – 70
5E12 CRANK OUT SYSTEM, MODULE 120 – 80 2B16 DATA CENTER, COMBINE 40 – 6
1B20 CRANKCASE OIL DRAIN, ENGINE 20 – 14 4C17 DATA CENTER, COMBINE 90 – 34
1C19 CRANKSHAFT (6076) 26 – 16 6J14 DECALS, FRONT 170 – 48
1E17 CRANKSHAFT DAMPER, NO PULLEY GROOVES 26 – 70 6J13 DECALS, FRONT WHEEL 170 – 46
1C23 CRANKSHAFT FRONT OIL SEAL (6076) 26 – 20 6J14 DECALS, REAR 170 – 48
6G24 CROSS AUGER BEARING PLATE, L H 130 – 52 6J13 DECALS, REAR WHEEL 170 – 46
6H3 CROSS AUGER COVERS AND CHANNEL 130 – 56 6H22 DECALS, SAFETY AND LOCATIONS 170 – 6
6H1 CROSS AUGERS, GRAIN TANK 130 – 54 6H24 DECALS, SAFETY AND LOCATIONS 170 – 8
4E1 CUP HOLDER 6I1 DECALS, SAFETY AND LOCATIONS 170 – 10
(660401- ) 90 – 68 6I3 DECALS, SAFETY AND LOCATIONS 170 – 12
6C12 CURTAIN, LOWER, STRAW SPREADER 125 – 30 6I5 DECALS, SAFETY AND LOCATIONS 170 – 14
6C10 CURTAIN, SPREADER, UPPER 125 – 28 6I7 DECALS, SAFETY AND LOCATIONS 170 – 16
6G1 CURTAINS, GRAIN TANK 130 – 30 6I9 DECALS, SAFETY AND LOCATIONS 170 – 18
3D16 CUTTING PLATFORM , 200 SERIES CONVERSION 6I11 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 20
PARTS 70 – 11 6I13 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 22
3G11 CYLINDER AND MOUNTING, UNLOADING AUGER 6I15 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 24
SWING 70 – 82 6I17 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 26
3G13 CYLINDER AND MOUNTING, UNLOADING AUGER 6I19 DECALS, SAFETY AND LOCATIONS – FRENCH 170 – 28
SWING (650401-655551) 70 – 84 6I21 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 30
1C7 CYLINDER BLOCK FITTINGS (6076) 26 – 4 6J1 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 34
5B9 CYLINDER COVER, THRESHING 120 – 1 6J3 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 36
5B14 CYLINDER DOOR 6J5 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 38
(CORN & GRAIN) (650401-655400) 120 – 6 6J7 DECALS, SAFETY AND LOCATIONS – ITALIAN 170 – 40
5B12 CYLINDER DOOR 6J17 DECALS, SEPARATOR MODULE SAFETY 170 – 51
(FOR CORN) ( -650400) 120 – 4 6J16 DECALS, TOP 170 – 50
5B16 CYLINDER DOOR (655401- ) 120 – 8 6B10 DECK, SUPPORTS AND FINS, STRAW CHOPPER 125 – 2
10-14 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=14
1A16
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2D11 DEFLECTOR – LESS HARVESTRAK 5G1 DRIVE SHAFT, GEARCASE MOUNTING AND
(655542- ) 40 – 50 PRIMARY COUNTERSHAFT 121 – 24
6H14 DIAL-A-MATIC ELECTRICAL HARNESS 160 – 4 3I21 DRIVE SHIELD, R H REAR 80 – 38
6H12 DIAL-A-MATIC HEADER HEIGHT CONTROL 3I17 DRIVE SHIELDS, AUGER (R-H SIDE) 80 – 34
HYDRAULIC LINE AND VALVE BLOCK 160 – 2 4F23 DRIVE SHIELDS, CONTOUR MASTER FEEDER
6H13 DIAL-A-MATIC HEADER HEIGHT CONTROL HOUSE (660401-660432) 110 – 16
VALVE BLOCK SOLENOID 160 – 3 4G1 DRIVE SHIELDS, CONTOUR MASTER FEEDER
3E15 DIAL-A-MATIC HEADER HEIGHT CONTROL, HOUSE (661186- ) 110 – 18
VALVE BLOCK SOLENOID 70 – 34 4F21 DRIVE SHIELDS, SAFETY STOP, FEEDER HOUSE 110 – 14
2G10 DIFFERENTIAL AND TRANSMISSION HOUSING 50 – 6 3I13 DRIVE SIDE SHIELDS, SEPARATOR 80 – 30
2G22 DIFFERENTIAL GEARS 50 – 18 6F18 DRIVE TIGHTENER AND IDLER, CLEAN GRAIN
2G22 DIFFERENTIAL SHAFTS 50 – 18 ELEVATOR 130 – 22
4E21 DIODE, A/C COMPRESSOR 5H15 DRIVE TIGHTENER, FEEDER HOUSE 121 – 62
(650401- ) R134A 90 – 90 4F19 DRIVE TIGHTENER, FIXED SPEED FEEDER
1C25 DIPSTICK, ENGINE OIL (6076) 26 – 22 HOUSE 110 – 12
6C16 DISC (BELT TYPE), CHAFF SPREADER 6E4 DRIVE TIGHTENER, LOWER TAILINGS AUGER 125 – 72
( -650400) 125 – 34 5H5 DRIVE TIGHTENER, PIVOT ARM, CLEANING
6C18 DISC, CHAFF SPREADER (DUAL MOTOR) SHOE AND CONVEYOR AUGER 121 – 52
(650401- ) 125 – 36 4F17 DRIVE TIGHTENER, VARIABLE SPEED 110 – 10
2H15 DISPLACEMENT CONTROL VALVE, HYDROSTATIC 2G5 DRIVE WHEELS 50 – 1
DRIVE 50 – 36 2G6 DRIVE WHEELS, HIGH FLOATATION
2B11 DOME LIGHT, CAB 40 – 1 PLANETARY FINAL DRIVE 50 – 2
4B20 DOOR AND GLASS, CAB 90 – 12 6H4 DRIVE, COUNTERSHAFT, UNLOADING AUGER 130 – 58
3J7 DOOR AND SHEET, L H FRONT CORNER 80 – 48 6H19 DRIVE, CYLINDER INTERMEDIATE, BELTS 170 – 3
4B18 DOOR LATCH, CAB 90 – 10 6H19 DRIVE, CYLINDER, BELTS 170 – 3
5B14 DOOR, CYLINDER 1B14 DRIVE, ENGINE 20 – 8
(CORN & GRAIN) (650401-655400) 120 – 6 5H7 DRIVE, FAN, SEPARATOR 121 – 54
5B12 DOOR, CYLINDER 5H13 DRIVE, FAN, SPEED CONTROL SHEAVE LINKAGE 121 – 60
(FOR CORN) ( -650400) 120 – 4 2G25 DRIVE, FINAL 50 – 21
5B16 DOOR, CYLINDER (655401- ) 120 – 8 2I22 DRIVE, HYDROSTATIC OIL HOSES, UPPER
3H13 DOOR, ENGINE ACCESS, HANDRAILS, ( -655400) 50 – 68
RADIATOR 80 – 6 2I20 DRIVE, HYDROSTATIC, LOWER OIL LINES
6E23 DOOR, HINGED, CLEAN GRAIN LOWER AUGER 130 – 2 (FOUR WHEEL DRIVE) (655401- ) 50 – 66
6C3 DOOR, LOWER, STRAW CHOPPER 125 – 20 2I18 DRIVE, HYDROSTATIC, LOWER OIL LINES
3I11 DOOR, REAR HOOD 80 – 28 (TWO WHEEL DRIVE) (655401- ) 50 – 64
3I9 DOOR, REAR HOOD ACCESS AND STOP 80 – 26 2I12 DRIVE, HYDROSTATIC, LOWER OIL LINES
1B10 DOOR, ROTARY SCREEN 20 – 4 (2&4 WHEEL DRIVE)( -655400) 50 – 58
5B10 DOOR, SEAL AND STONE TRAP, SEPARATOR/ 2I14 DRIVE, HYDROSTATIC, LOWER OIL LINES
FEEDER HOUSE 120 – 2 (2&4 WHEEL DRIVE)( -655400) 50 – 60
6C14 DOOR, STRAW SPREADER 125 – 32 1B8 DRIVE, ROTARY SCREEN 20 – 2
6C1 DOOR, UPPER REAR, STRAW CHOPPER 125 – 18 5H1 DRIVE, SECONDARY COUNTERSHAFT 121 – 48
3F16 DOUBLE PILOTED, AUGER SWING, SOLENOID 1B12 DRIVES, ENGINE FAN 20 – 6
CONTROL VALVE 70 – 60 5F9 DRIVES, ENGINE GEARBOX TO MODULE 121 – 8
1B20 DRAIN, ENGINE CRANKCASE OIL 20 – 14 5F11 DRIVES, ENGINE GEARBOX TO MODULE 121 – 10
5C9 DRIVE BELT AND BEATER SHAFT 120 – 26 5H19 DRIVES, STRAW CHOPPER 121 – 66
5C11 DRIVE BELT, BEATER, IDLER 120 – 28 6C8 DRIVES, STRAW SPREADER 125 – 26
6E1 DRIVE BRACKET, TAILINGS AND LOWER TROUGH 4H7 DRIVESHAFT, CONTOUR MASTER
SUPPORT 125 – 69 (660401- ) 110 – 50
6E3 DRIVE CHAIN TIGHTENER, UPPER TAILINGS 125 – 71 3B17 DRUM, BRAKE 60 – 10
2G14 DRIVE CONTROL CABLE, HYDROSTATIC 50 – 10 4G16 DRUM, CHAIN AND IDLER SHAFT, FEEDER
2H15 DRIVE DISPLACEMENT CONTROL VALVE CONVEYOR 110 – 34
HYDROSTATIC 50 – 36 2D21 DUAL LEVEL MONITOR HARNESS, GRAIN TANK 40 – 60
1C19 DRIVE GEAR, OIL PUMP (6076) 26 – 16 5C13 DUAL SPEED BEATER DRIVE CONVERSION,
5F7 DRIVE GEARCASE, MODULE, L H 121 – 6 700/400 RPM 120 – 30
5F5 DRIVE GEARCASE, MODULE, R H 121 – 4 2G7 DUAL WHEELS, WIDE-SPACED 50 – 3
5C5 DRIVE IDLER, STRIPPER BEATER 120 – 22 5G23 DUAL-RANGE CYLINDER DRIVE ADJUSTING
2G12 DRIVE LEVER, CABLE AND SWITCH HYDROSTATI BRACKET 121 – 46
C 50 – 8 5G13 DUAL-RANGE CYLINDER DRIVE GEARCASE 121 – 36
2H19 DRIVE MOTOR KIT, HYDROSTATIC 50 – 40 5G19 DUAL-RANGE CYLINDER DRIVE INTERMEDIATE
2H17 DRIVE MOTOR, HYDROSTATIC 50 – 38 SHAFT MOUNTING 121 – 42
2J11 DRIVE MOTOR, HYDROSTATIC 50 – 82 5G21 DUAL-RANGE CYLINDER DRIVE INTERMEDIATE
2H11 DRIVE PISTON ASSEMBLY, HYDROSTATIC 50 – 32 SHEAVE 121 – 44
2H5 DRIVE PUMP, HYDROSTATIC 50 – 26 5G17 DUAL-RANGE CYLINDER DRIVE TIGHTENER 121 – 40
2H9 DRIVE PUMP, HYDROSTATIC 50 – 30 5G15 DUAL-RANGE LOCKOUT ARM 121 – 38
3G5 DRIVE PUMP, REEL/BELT PICKUP 70 – 76 4C16 DUCTS, HEATER AND AIR CONDITIONING 90 – 33
2H7 DRIVE SHAFT SHIELDS, FINAL 50 – 28 4H11 DUST FAN BELT, LH SIDE FEEDER
HOUSE-RETROFIT INSTALLATION 110 – 54
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-15
PN=15
1A17
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
4H13 DUST FAN, LH SIDE FEEDER 5F17 ENGINE GEARCASE- SEPARATOR DRIVE WETHOUSE-
RETROFIT INSTALLATION 110 – 56 CLUTCH AND PUMP DRIVE SHAFT 121 – 16
5F21 ENGINE GEARCASE, SEPARATOR AND PUMP
DRIVE 121 – 20
E 5F23 ENGINE GEARCASE, SEPARATOR AND PUMP
DRIVE 121 – 22
1E5 E C U (6076HH030, HH034) 5F15 ENGINE GEARCASE, STRAW CHOPPER, UNLOAD-
(ROBERT BOSCH) (LATE DESIGN) 26 – 58 ING DRIVE AND SEPARATOR DRIVE GEAR 121 – 14
1E3 ECU (6076HH030) 5F13 ENGINE GEARCASE, UNLOADING AND SEPARATOR
(EARLY DESIGN) 26 – 56 DRIVE GEAR 121 – 12
1F4 ELECTRIC FUEL PUMP, WATER SEPARATOR AND 1B18 ENGINE MOUNTS AND REAR SUPPORT
FUEL FLOAT 30 – 4 (655401- ) 20 – 12
2F16 ELECTRICAL CONNECTOR SERVICE KIT 40 – 104 1C5 ENGINE OIL (TORQ-GARD) 26 – 1
2F18 ELECTRICAL CONNECTOR SERVICE KIT 40 – 106 1D9 ENGINE OIL COOLER 26 – 34
6H14 ELECTRICAL HARNESS, DIAL-A-MATIC 160 – 4 1C25 ENGINE OIL DIPSTICK (6076) 26 – 22
2F5 ELECTRICAL SERVICE OUTLET 40 – 93 1C25 ENGINE OIL DIPSTICK TUBE (6076) 26 – 22
1E13 ELECTRICAL TERMINALS AND CONNECTORS, 1D9 ENGINE OIL FILTER 26 – 34
WEATHERPACK (6076) 26 – 66 1D6 ENGINE OIL PUMP 26 – 30
5G7 ELECTROMAGNETIC HEADER CLUTCH 121 – 30 1D8 ENGINE OIL PUMP INTAKE 26 – 32
1E5 ELECTRONIC CONTROL UNIT (ROBERT BOSCH) 1C15 ENGINE OVERHAUL KIT(S)
(6076HH030, HH034) (LATE DESIGN) 26 – 58 (ESN 500000- ) 26 – 12
2E15 ELECTRONIC CONTROL UNIT MOUNTING SUPPORT 40 – 78 2D17 ENGINE PLUGGED AIR FILTER WARNING SWITCH 40 – 56
1E5 ELECTRONIC FUEL INJ PUMP (ROBERT BOSCH) 3H17 ENGINE RAILS 80 – 10
(6076HH030, HH034) (LATE DESIGN) 26 – 58 1E15 ENGINE REBUILD GASKET KIT (6076) 26 – 68
1E3 ELECTRONIC FUEL INJECTION PUMP 1E22 ENGINE SPEED SENSOR 26 – 75
(6076HH030) (EARLY DESIGN) 26 – 56 2B16 ENGINE TEMPERATURE GAUGE 40 – 6
2E17 ELECTRONICS MODULE AND CIRCUIT BOARD, 4C17 ENGINE TEMPERATURE GAUGE 90 – 34
CENTRAL 40 – 80 1C17 ENGINE UNDERHAUL KIT (STD BRGS)
5D15 ELEMENT, CHAFFER 120 – 58 (6076) 26 – 14
5D17 ELEMENT, CHAFFER 120 – 60 1F10 ETHER STARTING AID
5D19 ELEMENT, CHAFFER EXTENSION 120 – 62 (655615- ) 30 – 10
5D23 ELEMENT, SIEVE 120 – 66 1D25 ETHER STARTING FITTINGS (6076) 26 – 53
6F1 ELEVATOR AND CONVEYOR CHAIN, CLEAN GRAIN 1D24 EXHAUST MANIFOLD 26 – 52
LOWER 130 – 4 1D24 EXHAUST MANIFOLD GASKETS 26 – 52
6F3 ELEVATOR AND CONVEYOR CHAIN, CLEAN GRAIN 1F14 EXHAUST PIPES AND MUFFLER 30 – 14
LOWER 130 – 6 1D1 EXHAUST VALVE SHIELD (6076) 26 – 24
6F7 ELEVATOR SHAFT, SPROCKET AND SHEAVE, 1D1 EXHAUST VALVES (6076) 26 – 24
UPPER CLEAN GRAIN 130 – 10 1C15 EXPANDED ENGINE OVERHAUL KIT(S)
6F20 ELEVATOR SHIELDS, UPPER CLEAN GRAIN 130 – 24 (ESN 500000- ) 26 – 12
6H19 ELEVATOR, CLEAN GRAIN BELTS 170 – 3 4F5 EXPORT ONLY, CAB POST INSTRUMENT
6D23 ELEVATOR, TAILINGS, HOUSING 125 – 66 PANEL LH 90 – 98
6F5 ELEVATOR, UPPER CLEAN GRAIN 130 – 8 5D19 EXTENSION ELEMENT, CHAFFER 120 – 62
3H13 ENGINE ACCESS DOOR, HANDRAILS, AND 6G3 EXTENSIONS, GRAIN TANK 130 – 32
RADIATOR DOOR 80 – 6
3H23 ENGINE ACCESS PLATFORM AND STEP 80 – 16
2E9 ENGINE CIRCUIT BREAKERS 40 – 72 F
2E6 ENGINE CIRCUIT BREAKERS
( -660400) 40 – 69 1B12 FAN AND DRIVES, ENGINE 20 – 6
2E7 ENGINE CIRCUIT BREAKERS 3I19 FAN DRIVE AND MUD SHIELDS (L H SIDE) 80 – 36
(660401- ) 40 – 70 5H9 FAN DRIVE SPEED CONTROL LINKAGE
3H17 ENGINE COMPARTMENT 80 – 10 ( -655400) 121 – 56
3H19 ENGINE COMPARTMENT 80 – 12 5H11 FAN DRIVE SPEED CONTROL LINKAGE
3H21 ENGINE COMPARTMENT, AIR DUCT AND AIR DEF (655401- ) 121 – 58
LECTOR 80 – 14 5H13 FAN DRIVE SPEED CONTROL SHEAVE LINKAGE 121 – 60
1B15 ENGINE COOLANT HEATER 20 – 9 5H7 FAN DRIVE, SEPARATOR 121 – 54
1D17 ENGINE COOLANT HEATER (6076) 26 – 44 2C7 FAN, AIR CONDITIONER PRESSURIZER KIT
1B20 ENGINE CRANKCASE OIL DRAIN 20 – 14 (640401-650400) 40 – 22
1B14 ENGINE DRIVE 20 – 8 6H20 FAN, CLEANING, BELTS 170 – 4
1B12 ENGINE FAN AND DRIVES 20 – 6 4H13 FAN, DUST, LH SIDE FEEDER
5F9 ENGINE GEARBOX TO MODULE DRIVES 121 – 8 HOUSE-RETROFIT INSTALLATION 110 – 56
5F11 ENGINE GEARBOX TO MODULE DRIVES 121 – 10 4E8 FAN, PRESSURIZER AND AIR CONDITIONING/
5F19 ENGINE GEARCASE 121 – 18 HEATER 90 – 76
1B19 ENGINE GEARCASE COUPLING WITH HUB 20 – 13 5C24 FANS AND SHROUDS, CLEANING 120 – 42
3H3 ENGINE GEARCASE OIL FILTER ASSEMBLY 70 – 98 5D1 FANS AND SHROUDS, CLEANING 120 – 44
3F5 ENGINE GEARCASE PRESSURE REGULATOR 70 – 48 5B17 FC:5652 120 – 9
3H5 ENGINE GEARCASE PRESSURE REGULATOR, 4G20 FEED PLATE LATCH HANDLE 110 – 38
SOLENOID CONTROL VALVE 70 – 100 6H18 FEEDER CONVEYOR BELTS 170 – 2
10-16 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=16
1A18
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
4G18 FEEDER CONVEYOR DRIVE CHAIN, TIGHTENER 6D9 FITTINGS AND LINES, CHAFF SPREADER 125 – 52
AND GUIDES 110 – 36 1C7 FITTINGS, CYLINDER BLOCK (6076) 26 – 4
4H9 FEEDER CONVEYOR DRIVE CHAIN, TIGHTENER 1D25 FITTINGS, ETHER STARTING (6076) 26 – 53
AND GUIDES-RETROFIT INATALLATION 110 – 52 1F2 FITTINGS, FUEL TANK 30 – 2
4G16 FEEDER CONVEYOR IDLER SHAFT, DRUM AND 1F6 FITTINGS, TANK FUEL LINES 30 – 6
CHAIN 110 – 34 3G19 FITTINGS, TILT CYLINDER – CONTOUR MASTER
2F10 FEEDER HOUSE BACKSHAFT SPEED SENSOR 40 – 98 (660401- ) 70 – 90
6H20 FEEDER HOUSE BELTS 170 – 4 3C17 FIXED REAR AXLE
4F23 FEEDER HOUSE DRIVE SHIELDS – CONTOUR (GRAIN) (655542- ) 60 – 34
MASTER (660401-660432) 110 – 16 3C21 FIXED REAR AXLE STEERING TIE RODS
4G1 FEEDER HOUSE DRIVE SHIELDS – CONTOUR GRAIN (655542- ) 60 – 38
MASTER (661186- ) 110 – 18 3C20 FIXED REAR AXLE, 4-WHEEL DRIVE, STEERING
4F21 FEEDER HOUSE DRIVE SHIELDS AND SAFETY TIE RODS – GRAIN (655542- ) 60 – 37
STOP 110 – 14 4F19 FIXED SPEED FEEDER HOUSE DRIVE TIGHTENER 110 – 12
5H15 FEEDER HOUSE DRIVE TIGHTENER 121 – 62 3H6 FLAT O-RING KIT, HYDRAULIC 70 – 101
4F19 FEEDER HOUSE DRIVE TIGHTENER (FIXED 1F4 FLOAT, FUEL 30 – 4
SPEED) 110 – 12 4B10 FLOOR MAT AND PANELS, CAB 90 – 2
4H11 FEEDER HOUSE DUST FAN BELT, LH 4G14 FLOOR, FEEDER HOUSE 110 – 32
SIDE – RETROFIT INSTALLATION 110 – 54 2J9 FLOW CONTROL VALVE TO CAM LOBE MOTORS,
4H13 FEEDER HOUSE DUST FAN, LH SIDE LINES AND HOSES 50 – 80
– RETROFIT INSTALLATION 110 – 56 3D11 FLOW CONTROL VALVE, REEL DRIVE 70 – 6
4G14 FEEDER HOUSE FLOOR 110 – 32 6D7 FLOW CONTROL VALVE, REEL DRIVE 125 – 50
4G3 FEEDER HOUSE FRAME 110 – 20 1C22 FLYWHEEL (6076) 26 – 19
4G7 FEEDER HOUSE FRAME, TILT BEAM & CLOSURE 4B12 FOAM, SEALS, SOUND DEADENING, CAB 90 – 4
PLATES, CONTOUR MASTER (660401- ) 110 – 24 1C24 FOLLOWER, CAMSHAFT 26 – 21
4H5 FEEDER HOUSE FRONT DRIVE SHAFT, SHEAVE 1D3 FOLLOWER, CAMSHAFT 26 – 26
AND MOUNTINGS (FIXED SPEED WITH 110 – 48 4F13 FOOT CONTROL, FEEDER HOUSE REVERSER 110 – 6
4H1 FEEDER HOUSE RETURN FLOOR 110 – 44 4C21 FOOT CONTROL, REVERSER, FEEDER HOUSE 90 – 38
4C21 FEEDER HOUSE REVERSER FOOT CONTROL 90 – 38 4D6 FORE-AND-AFT, SEAT ADJUST 90 – 48
4F13 FEEDER HOUSE REVERSER FOOT CONTROL 110 – 6 2G10 FORKS, SHIFTER 50 – 6
4G5 FEEDER HOUSE SHELL – CONTOUR MASTER 2J17 FOUR WHEEL DRIVE CASE DRAIN HYDRAULIC
(660401- ) 110 – 22 LINES 50 – 88
4G22 FEEDER HOUSE SLIP CLUTCH 110 – 40 2J5 FOUR WHEEL DRIVE HYDRAULIC LINES AND
4G12 FEEDER HOUSE UPPER SHAFT 110 – 30 HOSES, L H ( -655400) 50 – 76
3D15 FEEDER HOUSE VARIABLE DRIVE HYDRAULIC 2J7 FOUR WHEEL DRIVE HYDRAULIC LINES AND HOS
HOSE 70 – 10 ES, L H (655401- ) 50 – 78
4G5 FEEDER HOUSE WEAR PLATES – CONTOUR 2J9 FOUR WHEEL DRIVE LINES AND HOSES 50 – 80
MASTER (660401- ) 110 – 22 3C13 FOUR-WHEEL DRIVE 60 – 30
4G24 FEEDER HOUSE, UPPER COUNTERSHAFT 5E14 FRAME AND COVERS, MODULE 120 – 82
VARIABLE DRIVE 110 – 42 4B22 FRAME AND SUPPORT, CAB 90 – 14
3E1 FEEDERHOUSE FITTINGS, HYDRAULIC – EXPORT 70 – 20 5D13 FRAME ARMS, PRECLEANER CHAFFER 120 – 56
3E1 FEEDERHOUSE PLUMBING- EXPORT 70 – 20 5D21 FRAME, CHAFFER 120 – 64
2B14 FIELD LIGHT SWITCH, AUX, OPTIONAL 40 – 4 4G3 FRAME, FEEDER HOUSE 110 – 20
2B20 FIELD LIGHTING, AUXILIARY 40 – 10 4G7 FRAME, FEEDER HOUSE, CONTOUR MASTER
2F9 FIELD LIGHTS 40 – 97 (660401- ) 110 – 24
1E19 FIELD WINDING COIL (12V F4) 26 – 72 3H11 FRAME, SEPARATOR 80 – 4
5E18 FILLER PLATE, MODULE GRATE ASSEMBLY 6C20 FRAME, SHIELDS AND HANDLES, CHAFF
AND FINGER BAR 120 – 86 SPREADER (BELT TYPE) ( -650400) 125 – 38
3D13 FILTER ASSEMBLY, MAIN, HYDRAULIC 70 – 8 5E1 FRAME, SIEVE 120 – 68
1D9 FILTER, ENGINE OIL 26 – 34 6C12 FRAME, STRAW SPREADER 125 – 30
1E11 FILTER, FUEL (6076HH030, HH034) 26 – 64 2B19 FRONT AND REAR TURN AND TAIL LIGHTS 40 – 9
3H3 FILTER, OIL, ENGINE GEARCASE, ASSEMBLY 70 – 98 2G8 FRONT AXLE 50 – 4
1D12 FILTER, WEEP HOLE (WATER PUMP) 26 – 38 3J7 FRONT CORNER SHEET AND DOOR, L H 80 – 48
4E6 FILTERS, AIR CONDITIONING AND HEATER 3J3 FRONT CORNER SHEET, R H 80 – 44
HOUSING 90 – 74 1C23 FRONT OIL SEAL (6076) 26 – 20
2G25 FINAL DRIVE 50 – 21 4F15 FRONT SHAFT WITH REVERSER (VARIABLE)
2H2 FINAL DRIVE AXLE, GEAR AND BEARINGS 50 – 23 9400, 9500 COMBINES 110 – 8
2H1 FINAL DRIVE HOUSING AND BEARING CAP 50 – 22 3C5 FRONT STEERING HOSES AND LINES 60 – 22
2H3 FINAL DRIVE PINION, SHAFTS AND BEARINGS 50 – 24 4F9 FRONT VARIABLE DRIVE SHEAVE AND
2H7 FINAL DRIVE SHAFT SHIELDS 50 – 28 MOUNTINGS 110 – 2
6B18 FINE CUT ROTOR STRAW CHOPPER (PADDLED 1D15 FRONT WATER MANIFOLD 26 – 42
NARROW (670401- ) 125 – 10 6J13 FRONT WHEEL DECALS 170 – 46
6B16 FINE CUT ROTOR STRAW CHOPPER (STRAIGHT 2C21 FRONT, L H MAIN WIRING HARNESS 40 – 36
NARROW (670401- ) 125 – 8 1E11 FUEL CHECK VALVE (6076HH030, HH034) 26 – 64
5E18 FINGER BAR, FILLER PLATE AND MODULE 1F11 FUEL COOLER 30 – 11
GRATE ASSEMBLY 120 – 86 1E11 FUEL FILTER (6076HH030, HH034) 26 – 64
6B10 FINS, SUPPORTS AND DECK, STRAW CHOPPER 125 – 2 1E11 FUEL FILTER LINES (6076HH030, HH034) 26 – 64
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-17
PN=17
1A19
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1F4 FUEL FLOAT 30 – 4 5G1 GEARCASE MOUNTING, PRIMARY COUNTERSHAFT
2B16 FUEL GAUGE 40 – 6 AND DRIVE SHAFT 121 – 24
4C17 FUEL GAUGE 90 – 34 5G13 GEARCASE, DUAL-RANGE CYLINDER DRIVE 121 – 36
1E1 FUEL INJECTION LINES (6076HH030 OR 5F17 GEARCASE, ENGINE 121 – 16
HH034) 26 – 54 5F19 GEARCASE, ENGINE 121 – 18
1E9 FUEL INJECTION NOZZLE (DENSO) 5F23 GEARCASE, ENGINE 121 – 22
(HH030 OR HH034) 26 – 62 6G15 GEARCASE, HORIZONTAL UNLOADING AUGER
1E1 FUEL INJECTION NOZZLES (6076HH030 OR DRIVE 130 – 44
HH034) 26 – 54 2J13 GEARCASE, HYDROSTATIC DRIVE PUMP,MAIN
1E5 FUEL INJECTION PUMP (ROBERT BOSCH) HYDRAULIC PUMP CONNECTING HARDWARE 50 – 84
(6076HH030, HH034) (LATE DESIGN) 26 – 58 5F7 GEARCASE, MODULE DRIVE, L,H 121 – 6
1E3 FUEL INJECTION PUMP (6076HH030) 5F5 GEARCASE, MODULE DRIVE, R H 121 – 4
(EARLY DESIGN) 26 – 56 5G3 GEARCASE, PRIMARY COUNTERSHAFT 121 – 26
1E7 FUEL INJECTION PUMP HOUSING CONNECTOR 5G5 GEARCASE, PRIMARY COUNTERSHAFT 121 – 28
(6076HH030, HH034) 26 – 60 2G22 GEARS, DIFFERENTIAL 50 – 18
1E5 FUEL LEAK-OFF LINES (ROBERT BOSCH) 2G18 GEARS, TRANSMISSION INPUT SHAFT 50 – 14
(6076HH030, HH034) (LATE DESIGN) 26 – 58 2G20 GEARS, TRANSMISSIONPINION SHAFT 50 – 16
1E1 FUEL LEAK-OFF LINES (6076HH030 OR 2G16 GEARSHIFT LEVER AND LINKAGE 50 – 12
HH034) 26 – 54 4C19 GEARSHIFT LEVER AND LINKAGE 90 – 36
1E3 FUEL LEAK-OFF LINES (6076HH030) 4B20 GLASS AND DOOR, CAB 90 – 12
(EARLY DESIGN) 26 – 56 4D20 GLOVE BOX, ARMREST (R H ) 90 – 62
1E3 FUEL SHUT-OFF SOLENOID HOUSING 5D11 GRAIN LEAK KIT 120 – 54
(6076HH030) (EARLY DESIGN) 26 – 56 6G1 GRAIN TANK AND CURTAINS 130 – 30
1F2 FUEL TANK, SUPPORTS, AND FITTINGS 30 – 2 6F24 GRAIN TANK BASE 130 – 28
1E8 FUEL TRANSFER PUMP (ROBERT BOSCH) 6H1 GRAIN TANK CROSS AUGERS 130 – 54
(6076HH030, HH034) 26 – 61 2D21 GRAIN TANK DUAL LEVEL MONITOR HARNESS 40 – 60
6G3 GRAIN TANK EXTENSIONS 130 – 32
6H7 GRAIN TANK SAMPLING TROUGH 130 – 62
G 6F22 GRAIN TANK TOP 130 – 26
3G9 GRAIN TANK UNLOADING DRIVE CYLINDER 70 – 80
1E15 GASKET KIT, CYLINDER HEAD (6076) 26 – 68 3G9 GRAIN TANK UNLOADING DRIVE CYLINDER
1E15 GASKET KIT, ENGINE REBUILD (6076) 26 – 68 MOUNTING 70 – 80
1E15 GASKET KIT, SHORT BLOCK (6076) 26 – 68 2D5 GRAIN TANK WIRING HARNESS, LIGHT, LIMIT
1D1 GASKET, CYLINDER HEAD (6076) 26 – 24 SWITCH AND LEVEL MONITOR 40 – 44
1D19 GASKET, INTAKE MANIFOLD 26 – 46 5B20 GRATE AND RASP BAR CONCAVE 120 – 12
1D9 GASKET, OIL COOLER 26 – 34 6H6 GUIDE, DRIVE BELT, UNLOADING AUGER 130 – 60
1D9 GASKET, OIL FILTER HOUSING 26 – 34 4G18 GUIDES, TIGHTENER AND FEEDER CONVEYOR
1D11 GASKET, OIL PAN 26 – 36 DRIVE CHAIN 110 – 36
1D8 GASKET, OIL PUMP INTAKE 26 – 32 4H9 GUIDES, TIGHTENER AND FEEDER CONVEYOR
1C21 GASKET, REAR OIL SEAL (6076) 26 – 18 DRIVE CHAIN-RETROFIT INSTALLATION 110 – 52
1D4 GASKET, ROCKER ARM COVER 26 – 27
1C23 GASKET, TIMING GEAR COVER (6076) 26 – 20
1D20 GASKET, TURBOCHARGER 26 – 48 H
1D15 GASKET, WATER MANIFOLD 26 – 42
1D12 GASKET, WATER PUMP 26 – 38 5C19 HANDLE, LATCHES, SHOE GRAIN SUPPLY AUGER
1D24 GASKETS, EXHAUST MANIFOLD 26 – 52 CLEANOUT DOOR 120 – 36
1D18 GASKETS, INTAKE MANIFOLD 26 – 45 6C22 HANDLES AND SHIELDS, CHAFF SPREADER
3D7 GAUGE, ACCUMULATOR PRESSURE 70 – 2 (DUAL MOTOR) (650401- ) 125 – 40
2B16 GAUGE, ENGINE TEMPERATURE 40 – 6 6C20 HANDLES, FRAME AND SHIELDS, CHAFF
4C17 GAUGE, ENGINE TEMPERATURE 90 – 34 SPREADER (BELT TYPE) ( -650400) 125 – 38
4F11 GEAR BOX, REVERSER 110 – 4 4C1 HANDRAIL AND LADDER, OPERATOR’S PLATFORM 90 – 18
6G5 GEAR CASE, VERTICAL AUGER LOWER 130 – 34 3H13 HANDRAILS, RADIATOR DOOR, ENGINE
1C24 GEAR, CAMSHAFT 26 – 21 ACCESS DOOR 80 – 6
2H2 GEAR, FINAL DRIVE 50 – 23 4F3 HARDWARE KIT, CAB 90 – 96
1E3 GEAR, FUEL INJECTION PUMP 4E18 HARDWARE KIT, COMPRESSOR
(6076HH030) (EARLY DESIGN) 26 – 56 ( -650400) R-12 90 – 86
1E5 GEAR, INJECTION PUMP (6076HH030, HH034) 4E23 HARDWARE KIT, COMPRESSOR
(ROBERT BOSCH)(LATE DESIGN) 26 – 58 (650401- ) R134A 90 – 92
1D6 GEAR, OIL PUMP DRIVE 26 – 30 2J13 HARDWARE, HYDRAULIC PUMP CONNECTING 50 – 84
1C19 GEAR, OIL PUMP DRIVE (6076) 26 – 16 2E11 HARNESS CONNECTORS, LOWER, 6076 ENGINE 40 – 74
1C22 GEAR, STARTER (6076) 26 – 19 2E13 HARNESS CONNECTORS, UPPER, 6076 ENGINE 40 – 76
5F9 GEARBOX, ENGINE TO MODULE DRIVES 121 – 8 2B22 HARNESS, ARMREST WIRING 40 – 12
5F11 GEARBOX, ENGINE TO MODULE DRIVES 121 – 10 2B12 HARNESS, CAB WIRING 40 – 2
5F3 GEARBOX, SHAFT AND COUPLING, MODULE 121 – 2 2D21 HARNESS, GRAIN TANK DUAL LEVEL MONITOR 40 – 60
5C15 GEARCASE AND SHEAVE, BEATER 120 – 32 2C23 HARNESS, L H MAIN WIRING, CENTER 40 – 38
6F16 GEARCASE AND SHEAVE, CLEAN GRAIN 2C21 HARNESS, L H MAIN WIRING, FRONT 40 – 36
ELEVATOR 130 – 20 2D15 HARNESS, LOWER, ENGINE, 6076 40 – 54
10-18 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=18
1A20
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2D13 HARNESS, UPPER, ENGINE, 6076 40 – 52 6G9 HORIZONTAL UNLOADING AUGER SWIVEL 130 – 38
1E3 HARNESS, WIRING (6076HH030) 2C19 HORN 40 – 34
(EARLY DESIGN) 26 – 56 3F3 HOSE, CHARGE PRESSURE 70 – 46
1E5 HARNESS, WIRING (6076HH030, HH034) 3D15 HOSE, HYDRAULIC, VARIABLE DRIVE, FEEDER
(ROBERT BOSCH)(LATE DESIGN) 26 – 58 HOUSE 70 – 10
2C5 HARNESS, WIRING, A/C, HEATER AND AIRSEAT 3E19 HOSE, LINE AND MOUNTING, ONE-HALF GALLON
(660401- ) 40 – 20 DUAL ACCUMULATOR ( -655400) 70 – 38
2C19 HARNESS, WIRING, MAIN, L H FRONT 40 – 34 6D15 HOSES AND LINES, CHAFF SPREADER
2D3 HARNESS, WIRING, R H MAIN 40 – 42 (DUAL MOTOR) (650401- ) 125 – 58
2C1 HARNESS, WIRING, STEERING COLUMN 2J9 HOSES AND LINES, FOUR WHEEL DRIVE 50 – 80
(646237-) 40 – 16 2J5 HOSES AND LINES, FOUR WHEEL DRIVE
2B16 HARVESTRAK 40 – 6 HYDRAULIC, L H ( -655400) 50 – 76
4C17 HARVESTRAK 90 – 34 2J7 HOSES AND LINES, FOUR WHEEL DRIVE HYDRAU
2D9 HARVESTRAK MONITOR SYSTEM 40 – 48 LIC, L H (655401- ) 50 – 78
2D9 HARVESTRAK WIRING HARNESS 40 – 48 3E9 HOSES AND LINES, HEADER LIFT 70 – 28
1D1 HEAD BOLT KIT (6076) 26 – 24 3F9 HOSES AND LINES, HYDRAULIC, CYLINDER
1D1 HEAD, CYLINDER (6076) 26 – 24 SPEED 70 – 52
6H20 HEADER BELTS 170 – 4 3E5 HOSES AND LINES, HYDRAULIC, REEL FORE-
5G7 HEADER ELECTROMAGNETIC CLUTCH 121 – 30 AND-AFT, FRONT 70 – 24
4F5 HEADER HEIGHT CONTROL GAUGE ON LH 3D19 HOSES AND LINES, HYDRAULIC, REEL PUMP 70 – 14
CAB POST (EXPORT ONLY) 90 – 98 3D21 HOSES AND LINES, HYDRAULIC, REEL PUMP 70 – 16
6H13 HEADER HEIGHT CONTROL VALVE 160 – 3 2J1 HOSES AND LINES, OIL COOLER, HYDROSTATIC
6H12 HEADER HEIGHT CONTROL, DIAL-A-MATIC ( -665400) 50 – 72
HYDRAULIC LINE AND VALVE BLOCK 160 – 2 2J3 HOSES AND LINES, OIL COOLER, HYDROSTATIC
3E15 HEADER HEIGHT CONTROL, DIAL-A-MATIC, (665401- ) 50 – 74
VALVE BLOCK SOLENOID 70 – 34 3G21 HOSES AND LINES, OIL COOLER, WET CLUTCH
6H14 HEADER HEIGHT CONTROL, ELECTRIC ( -665400) 70 – 92
HARNESS, DIAL-A-MATIC 160 – 4 3G23 HOSES AND LINES, OIL COOLER, WET CLUTCH
3D24 HEADER LIFT HYDRAULIC CYLINDER 70 – 19 (665401- ) 70 – 94
3E9 HEADER LIFT HYDRAULIC LINES AND HOSES 70 – 28 2I16 HOSES AND LINES, OIL, HYDROSTATIC DRIVE,
3F12 HEADER LIFT MODULE, SOLENOID CONTROL LOWER (TWO WHEEL DRIVE)(655401- ) 50 – 62
VALVE 70 – 56 3D17 HOSES AND LINES, REEL DRIVE, HYD , FRONT 70 – 12
2E23 HEADER LIGHTS, (EXPORT ONLY) 40 – 86 3D9 HOSES AND LINES, REEL DRIVE, HYDRAULIC,
1A9 HEADERS 10 – 8 L H SIDE ( -655400) 70 – 4
2E25 HEADLIGHTS UNDER CAB (EXPORT ONLY) 40 – 88 3D10 HOSES AND LINES, REEL DRIVE, HYDRAULIC,
1F11 HEAT EXCHANGER, FUEL 30 – 11 L H SIDE (655401- ) 70 – 5
2C9 HEATER AND AIR CONDITIONER SWITCH 40 – 24 3E3 HOSES AND LINES, REEL LIFT 70 – 22
4C16 HEATER AND AIR CONDITIONING DUCTS 90 – 33 3C5 HOSES AND LINES, STEERING, FRONT 60 – 22
4E6 HEATER HOUSING AND AIR CONDITIONING 3C11 HOSES AND LINES, STEERING, REAR 60 – 28
FILTERS 90 – 74 3G7 HOSES AND LINES, UNLOADING AUGER SWING
4F1 HEATER SYSTEM 90 – 94 HYDRAULIC CYLINDER 70 – 78
2C3 HEATER WIRING HARNESS 3E13 HOSES AND LINES, UPPER RETURN, HYDRAULIC
( -660400) 40 – 18 RESERVOIR 70 – 32
2C5 HEATER WIRING HARNESS 3G9 HOSES, GRAIN TANK UNLOADING DRIVE
(660401- ) 40 – 20 CYLINDER 70 – 80
1B15 HEATER, ENGINE COOLANT 20 – 9 3E11 HOSES, HYDRAULIC, CONTOUR MASTER (L H )
1D17 HEATER, ENGINE COOLANT (6076) 26 – 44 (OPTIONAL) (660401- ) 70 – 30
4D8 HEIGHT ADJUSTER, CAB SEAT 90 – 50 6D13 HOSES, LINES AND MOTOR, CHAFF SPREADER
2G6 HIGH FLOATATION DRIVE WHEELS ( -650400) 125 – 56
PLANETARY FINAL DRIVE 50 – 2 6E18 HOSES, LUBE, L H 125 – 86
2D19 HOLDDOWN, BATTERY 40 – 58 6E16 HOSES, LUBE, R H 125 – 84
4E1 HOLDER, CUP 2I20 HOSES, OIL, HYDROSTATIC DRIVE, LOWER
(660401- ) 90 – 68 (FOUR WHEEL DRIVE) (655401- ) 50 – 66
3I5 HOOD, REAR 80 – 22 2I18 HOSES, OIL, HYDROSTATIC DRIVE, LOWER
3I9 HOOD, REAR, ACCESS DOOR AND STOP 80 – 26 (TWO WHEEL DRIVE) (655401- ) 50 – 64
6G22 HORIZONTAL UNLOADING AUGER 2I14 HOSES, OIL, HYDROSTATIC DRIVE, LOWER
(17- AND 20-FT ) 130 – 50 (2&4 WHEEL DRIVE)( -655400) 50 – 60
6G15 HORIZONTAL UNLOADING AUGER DRIVE 2I12 HOSES, OIL, HYDROSTATIC DRIVE, LOWER
GEARCASE 130 – 44 (2&4 WHEEL DRIVE)( -655400) 50 – 58
6G20 HORIZONTAL UNLOADING AUGER HOUSING 2I22 HOSES, OIL, HYDROSTATIC DRIVE, UPPER
(EXPORT) (17 AND 20 FT ) 130 – 49A ( -655400) 50 – 68
6G16 HORIZONTAL UNLOADING AUGER HOUSING 3F7 HOSES, PRESSURE, HYDRAULIC 70 – 50
(14- AND 17-FT ) 130 – 46 1F16 HOSES, RADIATOR 30 – 16
6G18 HORIZONTAL UNLOADING AUGER HOUSING 3B23 HOSES, STEERING, UPPER 60 – 16
(17- AND 20-FT ) 130 – 48 3G19 HOSES, TILT CYLINDER – CONTOUR MASTER
6G13 HORIZONTAL UNLOADING AUGER HUB SUPPORT (660401- ) 70 – 90
AND SWITCH 130 – 42
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-19
PN=19
1A21
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2I24 HOSES, UPPER, HYDROSTATIC DRIVE 2J13 HYDRAULIC PUMP CONNECTING HARDWARE,
(FOUR WHEEL DRIVE)(655401- ) 50 – 70 HYDROSTATIC DRIVE PUMP 50 – 84
6D11 HOSES, VALVE, PUMP AND LINES, CHAFF 3G3 HYDRAULIC PUMP, MAIN 70 – 74
SPREADER 125 – 54 3E23 HYDRAULIC RETURN LINES
4C15 HOUSING AND AIR FILTER, CAB 90 – 32 ( -655400) 70 – 42
6B22 HOUSING AND KNIFEBANK, STRAW CHOPPER 125 – 14 3F1 HYDRAULIC RETURN LINES
6B24 HOUSING AND KNIFEBANK, STRAW CHOPPER 125 – 16 (655401- ) 70 – 44
6E6 HOUSING AND PADDLE ASSEMBLY, UPPER 3B23 HYDRAULIC STEERING HOSES, UPPER AND
TAILINGS AUGER 125 – 74 ATTENUATOR 60 – 16
5C20 HOUSING AND SHOE GRAIN SUPPLY AUGERS 120 – 38 3E13 HYDRAULIC UPPER RETURN LINES AND HOSES,
5C22 HOUSING AND SHOE GRAIN SUPPLY AUGERS 120 – 40 RESERVOIR 70 – 32
1E7 HOUSING CONNECTORS, FUEL INJECTION PUMP 3E16 HYDRAULIC/HYDROSTATIC OIL RESERVOIR
(6076HH030, HHO34) 26 – 60 AND MOUNTINGS 70 – 35
2G24 HOUSING COVER, TRANSMISSION AND 2H12 HYDROSTATIC DRIVE CHARGE PUMP 50 – 33
DIFFERENTIAL 50 – 20 2H13 HYDROSTATIC DRIVE CHARGE PUMP
2H1 HOUSING, FINAL DRIVE 50 – 22 (RING AND PINION) 50 – 34
1E3 HOUSING, FUEL SHUT-OFF SOLENOID 2G14 HYDROSTATIC DRIVE CONTROL CABLE 50 – 10
(6076HH030) (EARLY DESIGN) 26 – 56 2H15 HYDROSTATIC DRIVE DISPLACEMENT CONTROL
6G20 HOUSING, HORIZONTAL UNLOADING AUGER VALVE 50 – 36
(EXPORT) (17 AND 20 FT ) 130 – 49A 2I24 HYDROSTATIC DRIVE HOSES, UPPER
6G16 HOUSING, HORIZONTAL UNLOADING AUGER (FOUR WHEEL DRIVE)(655401- ) 50 – 70
(14- AND 17-FT ) 130 – 46 2G12 HYDROSTATIC DRIVE LEVER, CABLE AND SWITC
6G18 HOUSING, HORIZONTAL UNLOADING AUGER H 50 – 8
(17- AND 20-FT ) 130 – 48 2H17 HYDROSTATIC DRIVE MOTOR 50 – 38
2H9 HOUSING, HYDROSTATIC DRIVE PUMP 50 – 30 2J11 HYDROSTATIC DRIVE MOTOR 50 – 82
1D9 HOUSING, OIL COOLER AND FILTER 26 – 34 2H19 HYDROSTATIC DRIVE MOTOR KIT 50 – 40
1C21 HOUSING, REAR OIL SEAL (6076) 26 – 18 2I22 HYDROSTATIC DRIVE OIL HOSES, UPPER
3C18 HOUSING, SPINDLE, REAR AXLE 60 – 35 ( -655400) 50 – 68
6D23 HOUSING, TAILINGS ELEVATOR 125 – 66 2I20 HYDROSTATIC DRIVE OIL LINES AND HOSES,
1D15 HOUSING, THERMOSTAT, FRONT 26 – 42 LOWER (FOUR WHEEL DRIVE)(655401- ) 50 – 66
1D22 HOUSING, TURBOCHARGER CENTER 2I16 HYDROSTATIC DRIVE OIL LINES AND HOSES,
(AIRESEARCH) 26 – 50 LOWER (TWO WHEEL DRIVE)(655401- ) 50 – 62
1D23 HOUSING, TURBOCHARGER CENTER (SCHWITZER) 26 – 51 2I18 HYDROSTATIC DRIVE OIL LINES AND HOSES,
6G13 HUB SUPPORT AND SWITCH, HORIZONTAL LOWER (TWO WHEEL DRIVE)(655401- ) 50 – 64
UNLOADING AUGER 130 – 42 2I12 HYDROSTATIC DRIVE OIL LINES AND HOSES,
3D24 HYDRAULIC CYLINDER, HEADER LIFT 70 – 19 LOWER (2&4 WHEEL DRIVE)( -655400) 50 – 58
3D13 HYDRAULIC FILTER ASSEMBLY, MAIN 70 – 8 2I14 HYDROSTATIC DRIVE OIL LINES AND HOSES,
3E1 HYDRAULIC FITTINGS, FEEDERHOUSE – EXPORT 70 – 20 LOWER (2&4 WHEEL DRIVE)( -655400) 50 – 60
3H6 HYDRAULIC FLAT O-RING KIT 70 – 101 2H11 HYDROSTATIC DRIVE PISTON 50 – 32
3D15 HYDRAULIC HOSE, VARIABLE DRIVE, FEEDER 2H8 HYDROSTATIC DRIVE PUMP COVER 50 – 29
HOUSE 70 – 10 2H5 HYDROSTATIC DRIVE PUMP, FRONT COVER AND
3E11 HYDRAULIC HOSES, CONTOUR MASTER (L H ) SHAFT 50 – 26
(OPTIONAL) (660401- ) 70 – 30 2H9 HYDROSTATIC DRIVE PUMP, HOUSING,
3F9 HYDRAULIC LINES AND HOSES, CYLINDER SWASHPLATE, AND SERVO CYLINDERS 50 – 30
SPEED 70 – 52 2H14 HYDROSTATIC MOTOR VALVE 50 – 35
3E9 HYDRAULIC LINES AND HOSES, HEADER LIFT 70 – 28 2J1 HYDROSTATIC OIL COOLER LINES AND HOSES
2J5 HYDRAULIC LINES AND HOSES, L H , ( -665400) 50 – 72
FOUR WHEEL DRIVE ( -655400) 50 – 76 2J3 HYDROSTATIC OIL COOLER LINES AND HOSES
2J7 HYDRAULIC LINES AND HOSES, L H , FOUR WH (665401- ) 50 – 74
EEL DRIVE (655401- ) 50 – 78
3E5 HYDRAULIC LINES AND HOSES, REEL
FORE-AND-AFT, FRONT 70 – 24 I
3D9 HYDRAULIC LINES AND HOSES, REEL DRIVE
L H SIDE ( -655400) 70 – 4 6F18 IDLER AND DRIVE TIGHTENER, CLEAN GRAIN
3D10 HYDRAULIC LINES AND HOSES, REEL DRIVE ELEVATOR 130 – 22
L H SIDE (655401- ) 70 – 5 4G16 IDLER SHAFT, DRUM AND CHAIN, FEEDER
3D17 HYDRAULIC LINES AND HOSES, REEL DRIVE, CONVEYOR 110 – 34
FRONT 70 – 12 5C11 IDLER, BEATER DRIVE BELT 120 – 28
3D19 HYDRAULIC LINES AND HOSES, REEL PUMP 70 – 14 5C5 IDLER, STRIPPER BEATER DRIVE 120 – 22
3D21 HYDRAULIC LINES AND HOSES, REEL PUMP 70 – 16 1D12 IMPELLER, WATER PUMP 26 – 38
2J17 HYDRAULIC LINES, FOUR WHEEL DRIVE CASE 5C3 INDICATOR, CABLE AND BRACKETS, CONCAVE 120 – 20
DRAIN 50 – 88 1E5 INJ PUMP, ELECTRONIC FUEL (RB)
3E7 HYDRAULIC LINES, REEL FORE-AND-AFT, L H (6076HH030, HH034) (LATE DESIGN) 26 – 58
SIDE 70 – 26 1E9 INJECTION NOZZLE, FUEL (DENSO)
3G15 HYDRAULIC MOUNTING, UNLOADING AUGER (HH030 OR HH034) 26 – 62
SWING (655552- ) 70 – 86 1C23 INJECTION PUMP ACCESS COVER (6076) 26 – 20
3F7 HYDRAULIC PRESSURE LINES AND HOSES 70 – 50
10-20 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=20
1A22
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1E5 INJECTION PUMP GEAR (6076HH030, HH034) 1D1 KIT, HEAD BOLT (6076) 26 – 24
(ROBERT BOSCH)(LATE DESIGN) 26 – 58 3H6 KIT, HYDRAULIC FLAT O-RING 70 – 101
1E3 INJECTION PUMP LUBE LINE 2H19 KIT, HYDROSTATIC DRIVE MOTOR 50 – 40
(6076HH030) (EARLY DESIGN) 26 – 56 4G11 KIT, LOCKOUT ADAPTER – CONTOUR MASTER
1E5 INJECTION PUMP LUBE LINE (ROBERT BOSCH) (BELT PU & 4R CORN HEADS)(660401- ) 110 – 28
(6076HH030, HH034) (LATE DESIGN) 26 – 58 6C5 KIT, METRIC KEY STOCK 125 – 22
1E3 INJECTION PUMP, ELECTRONIC FUEL 6E20 KIT, METRIC KEY STOCK 125 – 88
(6076HH030) (EARLY DESIGN) 26 – 56 1C18 KIT, PISTON/LINER (6076)
2D12 INLET AIR TEMPERTURE SWITCH 40 – 51 (ESN 500000- ) 26 – 15
2H23 INNER COVER 50 – 44 3D11 KIT, REEL DRIVE FLOW CONTROL REPAIR 70 – 6
2G18 INPUT SHAFT, TRANSMISSION 50 – 14 4D5 KIT, RETROFIT SEAT BELT
1D1 INSERTS, VALVE SEAT (6076) 26 – 24 (MACHINES PRIOR TO 1996 MODEL YEAR) 90 – 46
2B16 INSTRUMENT PANEL, CAB POST 40 – 6 2F20 KIT, TERMINAL AND WIRING 40 – 108
4C17 INSTRUMENT PANEL, CAB POST 90 – 34 1C17 KIT, UNDERHAUL ENGINE (STD BRGS)
4F5 INSTRUMENT PANEL, CAB POST LH (6076) 26 – 14
(EXPORT ONLY) 90 – 98 1D14 KIT, WATER PUMP REPAIR (6076) 26 – 40
1D18 INTAKE MANIFOLD (EARLY DESIGN) 26 – 45 6B22 KNIFEBANK AND HOUSING, STRAW CHOPPER 125 – 14
1D19 INTAKE MANIFOLD (LATE DESIGN) 26 – 46 6B24 KNIFEBANK AND HOUSING, STRAW CHOPPER 125 – 16
1D19 INTAKE MANIFOLD GASKET 26 – 46 6D5 KNOB, CONTROL, CHECK VALVE AND ROD,
1D18 INTAKE MANIFOLD GASKETS 26 – 45 CHAFF SPREADER 125 – 48
4H15 INTAKE SHIELD 110 – 58
1F12 INTAKE TUBES, AIR CLEANER 30 – 12
1D1 INTAKE VALVES (6076) 26 – 24 L
1D8 INTAKE, ENGINE OIL PUMP 26 – 32
1B16 INTERCOOLER 20 – 10 2D1 L H AND R H MAIN WIRING HARNESS, REAR 40 – 40
1B22 INTERCOOLER, AIR 20 – 16 3J7 L H FRONT CORNER SHEET AND DOOR 80 – 48
4B16 INTERIOR TRIM PANELS, CAB 90 – 8 2C23 L H MAIN WIRING HARNESS, CENTER 40 – 38
5G19 INTERMEDIATE SHAFT MOUNTING, CYLINDER 2C21 L H MAIN WIRING HARNESS, FRONT 40 – 36
DRIVE, DUAL-RANGE 121 – 42 2C19 L H MAIN WIRING HARNESS, L H FRONT 40 – 34
5G21 INTERMEDIATE SHEAVE, CYLINDER DRIVE, 3J1 L H SERVICE ACCESS SHIELD 80 – 42
DUAL-RANGE 121 – 44 3C7 L H STEERING LINES 60 – 24
4C1 LADDER AND HANDRAIL, OPERATOR’S PLATFORM 90 – 18
3I1 LADDER AND LANDING, REAR 80 – 18
J 4C3 LADDER AND LATCH, OPERATOR’S PLATFORM 90 – 20
3I3 LADDER LANDING LATCH ARM, REAR 80 – 20
1C7 JETS, PISTON COOLING (6076) 26 – 4 2E5 LAMPS, LICENSE PLATE
(EXPORT) 40 – 68
3I1 LANDING AND LADDER, REAR 80 – 18
K 4C9 LANDING AND MIRROR, CAB (L H )
( -650400) 90 – 26
6C5 KEY STOCK, METRIC KIT 125 – 22 4C13 LANDING AND MIRROR, CAB (R H ) 90 – 30
6E20 KEY STOCK, METRIC KIT 125 – 88 4C11 LANDING AND MIRROR, CAB, L H
1C19 KEY DAMPER (6076) 26 – 16 (650401- ) 90 – 28
1C15 KIT(S), ENGINE OVERHAUL 3I3 LANDING LATCH ARM, REAR LADDER 80 – 20
(ESN 500000- ) 26 – 12 4C3 LATCH AND LADDER, OPERATOR’S PLATFORM 90 – 20
1C15 KIT(S), EXPANDED ENGINE OVERHAUL 4G20 LATCH HANDLE, FEED PLATE 110 – 38
(ESN 500000- ) 26 – 12 4B18 LATCH, CAB DOOR 90 – 10
2C7 KIT, AIR CONDITIONER PRESSURIZER FAN 6G5 LATCH, GRAIN TANK CLEAN OUT CHUTE 130 – 34
(640401-650400) 40 – 22 5C19 LATCHES, HANDLE, SHOE GRAIN SUPPLY AUGER
4D12 KIT, AIR SUSPENSION SEAT CLEANOUT DOOR 120 – 36
(665401- ) 90 – 54 5D11 LEAK KIT, GRAIN 120 – 54
4D14 KIT, AIR SUSPENSION SEAT 2D21 LEVEL MONITOR HARNESS, DUAL, GRAIN TANK 40 – 60
(665401- ) 90 – 56 2D5 LEVEL MONITOR, GRAIN TANK 40 – 44
4D16 KIT, AIR SUSPENSION SEAT 2G16 LEVER AND LINKAGE, GEARSHIFT 50 – 12
(665401- ) 90 – 58 4C19 LEVER AND LINKAGE, GEARSHIFT 90 – 36
4D18 KIT, AIR SUSPENSION SEAT 2E5 LICENSE PLATE LAMPS
(665401- ) 90 – 60 (EXPORT) 40 – 68
3F18 KIT, ARMATURE, SOLENOID CONTROL VALVE, 1D5 LIFT STRAPS, ENGINE 26 – 28
AUGER SWING 70 – 62 2E4 LIGHT SWITCH, SHOE ADJUSTING 40 – 67
4F3 KIT, CAB HARDWARE 90 – 96 2B11 LIGHT, CAB DOME 40 – 1
4E18 KIT, COMPRESSOR HARDWARE 2D5 LIGHT, GRAIN TANK 40 – 44
( -650400) R-12 90 – 86 2D21 LIGHT, UNLOADING AUGER, GRAIN TANK 40 – 60
4E23 KIT, COMPRESSOR HARDWARE 2B20 LIGHTING, AUXILIARY, FIELD 40 – 10
(650401- ) R134A 90 – 92 2E21 LIGHTS REAR (EXPORT ONLY) 40 – 84
2F16 KIT, ELECTRICAL CONNECTOR SERVICE 40 – 104 2B18 LIGHTS, CAB ROOF 40 – 8
2F18 KIT, ELECTRICAL CONNECTOR SERVICE 40 – 106 2B19 LIGHTS, FRONT AND REAR TAIL 40 – 9
5D11 KIT, GRAIN LEAK 120 – 54 2B19 LIGHTS, FRONT AND REAR TURN 40 – 9
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-21
PN=21
1A23
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2E23 LIGHTS, HEADER, (EXPORT ONLY) 40 – 86 2I20 LINES, OIL, HYDROSTATIC DRIVE, LOWER
2D23 LIGHTS, SIDE FINDER, L H AND R H 40 – 62 (FOUR WHEEL DRIVE) (655401- ) 50 – 66
2F8 LIGHTS, TRANSPORT WARNING 40 – 96 2I18 LINES, OIL, HYDROSTATIC DRIVE, LOWER
2E19 LIGHTS,REVOLVING BEACON (EXPORT ONLY) 40 – 82 (TWO WHEEL DRIVE) (655401- ) 50 – 64
2D5 LIMIT SWITCH, GRAIN TANK 40 – 44 2I12 LINES, OIL, HYDROSTATIC DRIVE, LOWER
3E19 LINE, HOSE AND MOUNTING, ONE-HALF GALLON (2&4 WHEEL DRIVE)( -655400) 50 – 58
DUAL ACCUMULATOR ( -655400) 70 – 38 2I14 LINES, OIL, HYDROSTATIC DRIVE, LOWER
1E3 LINE, INJECTION PUMP LUBE (2&4 WHEEL DRIVE)( -655400) 50 – 60
(6076HH030) (EARLY DESIGN) 26 – 56 3F7 LINES, PRESSURE, HYDRAULIC 70 – 50
1E5 LINE, INJECTION PUMP LUBE (ROBERT BOSCH) 3E23 LINES, RETURN, HYDRAULIC
(6076HH030, HH034) (LATE DESIGN) 26 – 58 ( -655400) 70 – 42
1C18 LINER O-RINGS (6076) 26 – 15 3F1 LINES, RETURN, HYDRAULIC
1C18 LINER SHIM (6076) 26 – 15 (655401- ) 70 – 44
1C18 LINERS, CYLINDER (6076) 26 – 15 3C9 LINES, STEERING R H SIDE 60 – 26
6D9 LINES AND FITTINGS, CHAFF SPREADER 125 – 52 3C7 LINES, STEERING, L H 60 – 24
6D15 LINES AND HOSES, CHAFF SPREADER 1F6 LINES, TANK FUEL 30 – 6
(DUAL MOTOR) (650401- ) 125 – 58 1D20 LINES, TURBOCHARGER OIL
2J9 LINES AND HOSES, FOUR WHEEL DRIVE 50 – 80 (ESN 500000- ) 26 – 48
2J5 LINES AND HOSES, FOUR WHEEL DRIVE 2G16 LINKAGE AND LEVER, GEARSHIFT 50 – 12
HYDRAULIC, L H ( -655400) 50 – 76 4C19 LINKAGE AND LEVER, GEARSHIFT 90 – 36
2J7 LINES AND HOSES, FOUR WHEEL DRIVE HYDRAU 5H13 LINKAGE, SHEAVE, FAN DRIVE SPEED CONTROL 121 – 60
LIC, L H (655401- ) 50 – 78 5H9 LINKAGE, SPEED CONTROL, FAN DRIVE
3E9 LINES AND HOSES, HEADER LIFT HYDRAULIC 70 – 28 ( -655400) 121 – 56
3F9 LINES AND HOSES, HYDRAULIC, CYLINDER 5H11 LINKAGE, SPEED CONTROL, FAN DRIVE
SPEED 70 – 52 (655401- ) 121 – 58
3D17 LINES AND HOSES, HYDRAULIC, REEL DRIVE, 6F13 LOADING AUGER, CLEAN GRAIN 130 – 16
FRONT 70 – 12 6F15 LOADING AUGER, CLEAN GRAIN, FOLD
3E5 LINES AND HOSES, HYDRAULIC, REEL FORE- (660401- ) 130 – 18
AND-AFT, FRONT 70 – 24 2H20 LOBE MOTOR, CAM 50 – 41
3D19 LINES AND HOSES, HYDRAULIC, REEL PUMP 70 – 14 4G11 LOCKOUT ADAPTER KIT – CONTOUR MASTER
3D21 LINES AND HOSES, HYDRAULIC, REEL PUMP 70 – 16 (BELT PU & 4R CORN HEADS)(660401-) 110 – 28
2J1 LINES AND HOSES, OIL COOLER, HYDROSTATIC 5G15 LOCKOUT ARM, DUAL-RANGE 121 – 38
( -665400) 50 – 72 4G9 LOCKOUT ASSEMBLY – CONTOUR MASTER
2J3 LINES AND HOSES, OIL COOLER, HYDROSTATIC (OPTIONAL) (660401- ) 110 – 26
(665401- ) 50 – 74 2C23 LOGIC MODULE 40 – 38
3G21 LINES AND HOSES, OIL COOLER, WET CLUTCH 2D3 LOGIC MODULE 40 – 42
( -665400) 70 – 92 1C9 LONGBLOCK, “COMPLETE BLOCK ASSEMBLY”
3G23 LINES AND HOSES, OIL COOLER, WET CLUTCH (ESN 500000- ) 26 – 6
(665401- ) 70 – 94 2C10 LOW SHAFT SPEED SENSORS AND BRACKETS 40 – 25
2I16 LINES AND HOSES, OIL, HYDROSTATIC DRIVE, 6C12 LOWER CURTAIN, STRAW SPREADER 125 – 30
LOWER (TWO WHEEL DRIVE)(655401- ) 50 – 62 6C3 LOWER DOOR, STRAW CHOPPER 125 – 20
3D9 LINES AND HOSES, REEL DRIVE, HYDRAULIC, 2E11 LOWER HARNESS CONNECTORS FOR 6076 ENGINE 40 – 74
L H SIDE ( -655400) 70 – 4 2D15 LOWER HARNESS FOR 6076 ENGINE 40 – 54
3D10 LINES AND HOSES, REEL DRIVE, HYDRAULIC, 2I20 LOWER HYDROSTATIC DRIVE OIL LINES AND
L H SIDE (655401- ) 70 – 5 HOSES (FOUR WHEEL DRIVE)(655401- ) 50 – 66
3E3 LINES AND HOSES, REEL LIFT 70 – 22 2I16 LOWER HYDROSTATIC DRIVE OIL LINES AND
3C5 LINES AND HOSES, STEERING, FRONT 60 – 22 HOSES (TWO WHEEL DRIVE)(655401- ) 50 – 62
3C11 LINES AND HOSES, STEERING, REAR 60 – 28 2I18 LOWER HYDROSTATIC DRIVE OIL LINES AND
3G7 LINES AND HOSES, UNLOADING AUGER SWING HOSES (TWO WHEEL DRIVE)(655401- ) 50 – 64
HYDRAULIC CYLINDER 70 – 78 2I12 LOWER HYDROSTATIC DRIVE OIL LINES AND
3E13 LINES AND HOSES, UPPER RETURN, HYDRAULIC HOSES (2&4 WHEEL DRIVE)( -655400) 50 – 58
RESERVOIR 70 – 32 2I14 LOWER HYDROSTATIC DRIVE OIL LINES AND
1E11 LINES, FUEL FILTER (6076HH030, HH034) 26 – 64 HOSES (2&4 WHEEL DRIVE)( -655400) 50 – 60
1E1 LINES, FUEL INJECTION (6076HH030 OR 3C3 LOWER STEERING COLUMN 60 – 20
HH034) 26 – 54 4E4 LOWER STEERING COLUMN 90 – 72
1E5 LINES, FUEL LEAK-OFF (ROBERT BOSCH) 6H21 LOWER TAILINGS AUGER BELT 170 – 5
(6076HH030, HH034) (LATE DESIGN) 26 – 58 6E2 LOWER TAILINGS AUGER CHAIN TIGHTENER 125 – 70
1E1 LINES, FUEL LEAK-OFF (6076HH030 OR 6E4 LOWER TAILINGS AUGER DRIVE TIGHTENER 125 – 72
HH034) 26 – 54 6D19 LOWER TAILINGS AUGER SHAFT AND TIGHTENER 125 – 62
1E3 LINES, FUEL LEAK-OFF (6076HH030) 6D21 LOWER TAILINGS AUGER TROUGH 125 – 64
(EARLY DESIGN) 26 – 56 6E1 LOWER TROUGH SUPPORT AND TAILINGS DRIVE
6D11 LINES, HOSES, VALVE AND PUMP, CHAFF BRACKET 125 – 69
SPREADER 125 – 54 6H9 LUBE BANK, UNLOADING AUGER 130 – 64
3E7 LINES, HYDRAULIC, REEL FORE-AND-AFT, 6E18 LUBE HOSES L H 125 – 86
L H SIDE 70 – 26 6E16 LUBE HOSES R H 125 – 84
6D13 LINES, MOTOR AND HOSES, CHAFF SPREADER 5E16 LUBE LINES AND BEARING, MODULE FRONT 120 – 84
( -650400) 125 – 56 2G18 LUBE PUMP, TRANSMISSION INPUT SHAFT 50 – 14
10-22 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=22
1A24
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
M 3E19 MOUNTING AND ONE-HALF GALLON DUAL
ACCUMULATOR ( -655400) 70 – 38
1E22 MAGNETIC PICK-UP 26 – 75 6D3 MOUNTING SUPPORT, CHAFF SPREADER 125 – 46
1C7 MAIN BEARING CAPS 26 – 4 2E15 MOUNTING SUPPORT, ELECTRONIC CONTROL
1C20 MAIN BEARINGS (6076) 26 – 17 UNIT 40 – 78
3D13 MAIN HYDRAULIC FILTER ASSEMBLY 70 – 8 3I7 MOUNTING TRACKS AND SUPPORTS, MODULE 80 – 24
6H13 MAIN VALVE BLOCK SOLENOID 3G9 MOUNTING, GRAIN TANK UNLOADING DRIVE
DIAL-A-MATIC HEADER HEIGHT CONTROL 160 – 3 CYLINDER 70 – 80
2H25 MANIFOLD AND PACKING 50 – 46 3E21 MOUNTING, ONE GALLON ACCUMULATOR
4E21 MANIFOLD, A/C COMPRESSOR (655401- ) 70 – 40
(650401- ) R134A 90 – 90 3E17 MOUNTING, ONE HALF GALLON SINGLE
1D24 MANIFOLD, EXHAUST 26 – 52 ACCUMULATOR 70 – 36
1D18 MANIFOLD, INTAKE (EARLY DESIGN) 26 – 45 3G11 MOUNTING, UNLOADING AUGER SWING
1D19 MANIFOLD, INTAKE (LATE DESIGN) 26 – 46 CYLINDER 70 – 82
1D15 MANIFOLD, WATER, FRONT 26 – 42 3G13 MOUNTING, UNLOADING AUGER SWING
3B15 MASTER CYLINDER, BRAKE 60 – 8 CYLINDER (650401-655551) 70 – 84
3B13 MASTER CYLINDER, RESERVOIR AND BRAKE 3G15 MOUNTING, UNLOADING AUGER SWING
LINES 60 – 6 HYDRAULIC (655552- ) 70 – 86
3B11 MASTER CYLINDERS 60 – 4 3G1 MOUNTINGS, SIX STACK SOLENOID CONTROL
4B10 MAT, FLOOR, AND CAB PANELS 90 – 2 VALVE (660401- ) 70 – 72
6C5 METRIC KEY STOCK KIT 125 – 22 3F23 MOUNTINGS, SOLENOID CONTROL VAVLE
6E20 METRIC KEY STOCK KIT 125 – 88 MODULE ASSEMBLY 70 – 68
4C9 MIRROR AND LANDING, CAB (L H ) 1B18 MOUNTS, ENGINE (655401- ) 20 – 12
( -650400) 90 – 26 3I19 MUD AND FAN DRIVE SHIELDS (L-H SIDE) 80 – 36
4C13 MIRROR AND LANDING, CAB (R H ) 90 – 30 2I11 MUD SHIELDS 50 – 57
4C11 MIRROR AND LANDING, CAB, L H 3J9 MUD SHIELDS (R H SIDE) 80 – 50
(650401- ) 90 – 28 1F14 MUFFLER AND EXHAUST PIPES 30 – 14
5E9 MODULE ASSEMBLY (655542- ) 120 – 76
5E12 MODULE CRANK OUT SYSTEM 120 – 80
5F7 MODULE DRIVE GEARCASE, L H 121 – 6 N
5F5 MODULE DRIVE GEARCASE, R H 121 – 4
5F9 MODULE DRIVES, ENGINE GEARCASE 121 – 8 1E9 NOZZLE, FUEL INJECTION (DENSO)
5F11 MODULE DRIVES, ENGINE GEARCASE 121 – 10 (HH030 OR HH034) 26 – 62
5E14 MODULE FRAME AND COVERS 120 – 82 1E1 NOZZLES, FUEL INJECTION (6076HH030 OR
5E16 MODULE FRONT BEARING AND LUBE LINES 120 – 84 HH034) 26 – 54
5F3 MODULE GEARBOX, SHAFT AND COUPLING 121 – 2
5E18 MODULE GRATE ASSEMBLY, FINGER BAR AND
FILLER PLATE 120 – 86 O
3I7 MODULE MOUNTING TRACKS AND SUPPORTS 80 – 24
3H9 MODULE RAILS, TINE SEPARATOR 80 – 2 1C18 O-RINGS, LINER (6076) 26 – 15
5E10 MODULE REAR SHIELDS 120 – 78 1B22 OIL COOLER 20 – 16
6J17 MODULE SAFETY DECALS, SEPARATOR 170 – 51 3H1 OIL COOLER AND A/C CONDENSER 70 – 96
5E20 MODULE TINE SEPARATORS 120 – 88 1D9 OIL COOLER GASKET 26 – 34
2D1 MODULE WIRING HARNESS 40 – 40 2J1 OIL COOLER LINES AND HOSES, HYDROSTATIC
2E17 MODULE, CENTRAL ELECTRONICS 40 – 80 ( -665400) 50 – 72
2C23 MODULE, LOGIC 40 – 38 2J3 OIL COOLER LINES AND HOSES, HYDROSTATIC
2D3 MODULE, LOGIC 40 – 42 (665401- ) 50 – 74
3G1 MODULE, SIX STACK SOLENOID CONTROL VALVE 3G21 OIL COOLER LINES AND HOSES, WET CLUTCH
ASSEMBLY & MOUNTINGS (660401- ) 70 – 72 ( -665400) 70 – 92
2D9 MONITOR AND WIRING HARNESS, HARVESTRAK 40 – 48 3G23 OIL COOLER LINES AND HOSES, WET CLUTCH
2D21 MONITOR HARNESS, DUAL LEVEL, GRAIN TANK 40 – 60 (665401- ) 70 – 94
2D5 MONITOR, LEVEL, GRAIN TANK 40 – 44 1B20 OIL DRAIN, ENGINE CRANKCASE 20 – 14
2F2 MOTOR AND BRACKET, REEL SPEED 40 – 90 3H3 OIL FILTER ASSEMBLY, ENGINE GEARCASE 70 – 98
2H19 MOTOR KIT, HYDROSTATIC DRIVE 50 – 40 1D9 OIL FILTER BYPASS VALVE 26 – 34
2H14 MOTOR VALVE, HYDROSTATIC 50 – 35 1D9 OIL FILTER HOUSING GASKET 26 – 34
2H20 MOTOR, CAM LOBE 50 – 41 1D9 OIL FILTER, ENGINE 26 – 34
3D14 MOTOR, CHAFF SPREADER 2I20 OIL HOSES, HYDROSTATIC DRIVE, LOWER
(EATON) (655929- ) 70 – 9 (FOUR WHEEL DRIVE) (655401- ) 50 – 66
2D18 MOTOR, CONCAVE ADJUSTING 40 – 57 2I18 OIL HOSES, HYDROSTATIC DRIVE, LOWER
6D13 MOTOR, HOSES AND LINES, CHAFF SPREADER (TWO WHEEL DRIVE) (655401- ) 50 – 64
( -650400) 125 – 56 2I12 OIL HOSES, HYDROSTATIC DRIVE, LOWER
2H17 MOTOR, HYDROSTATIC DRIVE 50 – 38 (2&4 WHEEL DRIVE)( -655400) 50 – 58
2J11 MOTOR, HYDROSTATIC DRIVE 50 – 82 2I14 OIL HOSES, HYDROSTATIC DRIVE, LOWER
2D20 MOTOR, SEPARATOR FAN DRIVE, ADJUSTING 40 – 59 (2&4 WHEEL DRIVE)( -655400) 50 – 60
1E18 MOTOR, STARTING (DENSO) 2I22 OIL HOSES, UPPER, HYDROSTATIC DRIVE
(12V F4) 26 – 71 ( -655400) 50 – 68
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-23
PN=23
1A25
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
2I16 OIL LINES AND HOSES, HYDROSTATIC DRIVE, 3B9 PARKING BRAKE PEDAL AND SEAL 60 – 2
LOWER (TWO WHEEL DRIVE)(655401- ) 50 – 62 4D4 PASSENGER SEAT SEATBELT 90 – 45
2I20 OIL LINES HYDROSTATIC DRIVE, LOWER 3B9 PEDAL, PARKING BRAKE 60 – 2
(FOUR WHEEL DRIVE) (655401- ) 50 – 66 3B11 PEDALS, BRAKE 60 – 4
2I18 OIL LINES HYDROSTATIC DRIVE, LOWER 1E22 PICK-UP, MAGNETIC 26 – 75
(TWO WHEEL DRIVE) (655401- ) 50 – 64 3G5 PICKUP DRIVE PUMP, REEL/BELT 70 – 76
2I14 OIL LINES HYDROSTATIC DRIVE, LOWER 2G20 PINION SHAFT, TRANSMISSION 50 – 16
(2&4 WHEEL DRIVE)( -655400) 50 – 60 2H3 PINION, FINAL DRIVE 50 – 24
2I12 OIL LINES, HYDROSTATIC DRIVE, LOWER 1F14 PIPES, MUFFLER AND EXHAUST 30 – 14
(2&4 WHEEL DRIVE)( -655400) 50 – 58 2H11 PISTON ASSEMBLY, HYDROSTATIC DRIVE 50 – 32
1D20 OIL LINES, TURBOCHARGER 1C7 PISTON COOLING JETS (6076) 26 – 4
(ESN 500000- ) 26 – 48 1C18 PISTON RINGS (6076) (ESN 500000- ) 26 – 15
1D11 OIL PAN 26 – 36 1C18 PISTON/LINER KIT(6076)
1D11 OIL PAN DRAIN VALVE 26 – 36 (ESN 500000- ) 26 – 15
1D11 OIL PAN GASKET 26 – 36 1C18 PISTON, ENGINE (6076)(ESN 500000- ) 26 – 15
1D9 OIL PRESSURE REGULATING VALVE 26 – 34 2I2 PISTONS, CAM AND CARRIER 50 – 48
1D6 OIL PUMP DRIVE GEAR 26 – 30 5H5 PIVOT ARM DRIVE TIGHTENER, CLEANING SHOE
1C19 OIL PUMP DRIVE GEAR (6076) 26 – 16 AND CONVEYOR AUGER 121 – 52
1D8 OIL PUMP INTAKE GASKET 26 – 32 2I4 PIVOTS, CAPS AND YOKE 50 – 50
3E16 OIL RESERVOIR AND MOUNTINGS, HYDRAULIC/ 6G24 PLATE, CROSS AUGER BEARING, L H 130 – 52
HYDROSTATIC 70 – 35 4G7 PLATES, CLOSURE, FEEDER HOUSE – CONTOUR
1C23 OIL SEAL, CRANKSHAFT FRONT (6076) 26 – 20 MASTER (660401- ) 110 – 24
1C21 OIL SEAL, REAR (6076) 26 – 18 4G5 PLATES, WEAR, FEEDER HOUSE – CONTOUR
4E21 OIL, A/C COMPRESSOR MASTER (660401- ) 110 – 22
(650401- ) R134A 90 – 90 3H23 PLATFORM AND STEP, ENGINE ACCESS 80 – 16
3E21 ONE GALLON ACCUMULATOR AND MOUNTING 3H17 PLATFORM, ENGINE 80 – 10
(655401- ) 70 – 40 3D16 PLATFORM, 200 SERIES CUTTING, CONVERSION
3E17 ONE HALF GALLON SINGLE ACCUMULATOR AND PARTS 70 – 11
MOUNTING 70 – 36 3E1 PLUMBING, FEEDERHOUSE – EXPORT 70 – 20
3E19 ONE-HALF GALLON DUAL ACCUMULATOR, HOSE, 2B16 POST INSTRUMENT PANEL, CAB 40 – 6
LINE AND MOUNTING ( -655400) 70 – 38 4C17 POST INSTRUMENT PANEL, CAB 90 – 34
4C1 OPERATOR’S PLATFORM LADDER AND HANDRAIL 90 – 18 5D9 PRECLEANER CHAFFER FRAME 120 – 52
4C3 OPERATOR’S PLATFORM LADDER AND LATCH 90 – 20 5D13 PRECLEANER CHAFFER FRAME ARMS 120 – 56
4D1 OPERATOR’S SEAT AND BACKREST 90 – 42 5D5 PRECLEANING CHAFFER
4D3 OPERATOR’S SEAT SEATBELT 90 – 44 ( -655400) 120 – 48
2H21 OUTER COVER, BEARINGS, SEALS AND SHAFT 5D7 PRECLEANING CHAFFER (655401- ) 120 – 50
CAM LOBE MOTOR 50 – 42 3D7 PRESSURE GAUGE, ACCUMULATOR 70 – 2
2F6 OUTLET, CONVENIENCE 3F3 PRESSURE HOSE, CHARGE 70 – 46
(660401- ) 40 – 94 3F5 PRESSURE REGULATOR, ENGINE GEARCASE 70 – 48
2F5 OUTLET, ELECTRICAL SERVICE 40 – 93 3F7 PRESSURE, HYDRAULIC, LINES AND HOSES 70 – 50
1C15 OVERHAUL KIT(S), ENGINE 4E8 PRESSURIZER AND AIR CONDITIONING/
(ESN 500000- ) 26 – 12 HEATER FAN 90 – 76
2B14 OVERHEAD CONSOLE PANEL 40 – 4 5G3 PRIMARY COUNTERSHAFT GEARCASE 121 – 26
5G5 PRIMARY COUNTERSHAFT GEARCASE 121 – 28
5G1 PRIMARY COUNTERSHAFT, DRIVE SHAFT AND
P GEARCASE MOUNTING 121 – 24
5G9 PRIMARY COUNTERSHAFT, SUPPORTS AND VARI-
2H25 PACKING AND MANIFOLD 50 – 46 ABLE SHEAVE 121 – 32
6E6 PADDLE ASSEMBLY AND HOUSING, UPPER 4E22 PULLEY, A/C COMPRESSOR
TAILINGS AUGER 125 – 74 (650401- ) R134A 90 – 91
1D11 PAN, OIL 26 – 36 4E16 PULLEY, COMPRESSOR
6C24 PAN, SEALS, CHAFF SPREADER (BELT TYPE) ( -650400) R-12 90 – 84
( -650400) 125 – 42 5H1 PULLEY, SECONDARY COUNTERSHAFT DRIVE 121 – 48
5E3 PAN, SHAKER 5F21 PUMP AND SEPARATOR DRIVE, ENGINE
( -655400) 120 – 70 GEARCASE 121 – 20
5E5 PAN, SHAKER 5F23 PUMP DRIVE AND SEPARATOR, GEARCASE 121 – 22
(655401-665400) 120 – 72 5F17 PUMP DRIVE SHAFT AND SEPARATOR DRIVE
5E7 PAN, SHAKER WET-CLUTCH, GEARCASE 121 – 16
(665401- ) 120 – 74 6D17 PUMP, CHAFF SPREADER 125 – 60
6D1 PAN, WINGS AND SEALS, CHAFF SPREADER 2H5 PUMP, DRIVE, HYDROSTATIC 50 – 26
(DUAL MOTOR) (650401- ) 125 – 44 1D6 PUMP, ENGINE OIL 26 – 30
2B24 PANEL, ARMREST CONTROL 40 – 14 1F4 PUMP, FUEL 30 – 4
2B16 PANEL, CAB POST INSTRUMENT 40 – 6 1E5 PUMP, FUEL INJECTION (ROBERT BOSCH)
4C17 PANEL, CAB POST INSTRUMENT 90 – 34 (6076HH030, HH034) (LATE DESIGN) 26 – 58
2B14 PANEL, OVERHEAD CONSOLE 40 – 4 1E3 PUMP, FUEL INJECTION (6076HH030)
4B10 PANELS AND FLOOR MAT, CAB 90 – 2 (EARLY DESIGN) 26 – 56
4B16 PANELS, CAB INTERIOR TRIM 90 – 8
10-24 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=24
1B1
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1E8 PUMP, FUEL TRANSFER (ROBERT BOSCH) 3D9 REEL DRIVE HYDRAULIC LINES AND HOSES
(6076HH030, HH034) 26 – 61 L H SIDE ( -655400) 70 – 4
2H12 PUMP, HYDROSTATIC DRIVE CHARGE 50 – 33 3D10 REEL DRIVE HYDRAULIC LINES AND HOSES
2H13 PUMP, HYDROSTATIC DRIVE CHARGE L H SIDE (655401- ) 70 – 5
(RING AND PINION) 50 – 34 3D17 REEL DRIVE HYDRAULIC LINES AND HOSES,
6D11 PUMP, LINES, HOSES AND VALVE, CHAFF FRONT 70 – 12
SPREADER 125 – 54 3E5 REEL FORE-AND-AFT HYDRAULIC LINES AND
3G3 PUMP, MAIN HYDRAULIC 70 – 74 HOSES, FRONT 70 – 24
3D19 PUMP, REEL, HYDRAULIC LINES AND HOSES 70 – 14 3E7 REEL FORE-AND-AFT HYDRAULIC LINES, L H
3D21 PUMP, REEL, HYDRAULIC LINES AND HOSES 70 – 16 SIDE 70 – 26
3B21 PUMP, STEERING 60 – 14 3F19 REEL FORE/AFT SOLENOID CONTROL VALVE
1D12 PUMP, WATER 26 – 38 (650401- ) 70 – 64
1D3 PUSH RODS 26 – 26 3F14 REEL LIFT AND CYLINDER SPEED, SOLENOID
CONTROL VALVE 70 – 58
3E3 REEL LIFT LINES AND HOSES 70 – 22
Q 3D19 REEL PUMP HYDRAULIC LINES AND HOSES 70 – 14
3D21 REEL PUMP HYDRAULIC LINES AND HOSES 70 – 16
2I1 QUILL, BEARING AND COVER 50 – 47 2F4 REEL SPEED CONTROL AND RELAYS (EXPORT
ONLY) 40 – 92
2F2 REEL SPEED MOTOR AND BRACKET 40 – 90
R 5H17 REEL/BELT PICKUP CHARGE PUMP MOUNTING
AND SHEAVE 121 – 64
2D3 R H MAIN WIRING HARNESS 40 – 42 5H18 REEL/BELT PICKUP CHARGE PUMP MOUNTING
3I23 R H SERVICE ACCESS SHIELD 80 – 40 AND SHEAVE 121 – 65
3C9 R H SIDE STEERING LINES 60 – 26 3G5 REEL/BELT PICKUP DRIVE PUMP 70 – 76
1F16 RADIATOR AND HOSES 30 – 16 2E1 REGULATOR, ALTERNATOR AND VOLTAGE – BOSC
3H13 RADIATOR DOOR, ENGINE ACCESS DOOR, H 40 – 64
HANDRAILS 80 – 6 3F5 REGULATOR, PRESSURE, ENGINE GEARCASE 70 – 48
3H15 RADIATOR SHELL AND SEALS 80 – 8 2E9 RELAYS, ENGINE CIRCUIT BREAKER 40 – 72
1B22 RADIATOR WITH OIL COOLER 20 – 16 2E6 RELAYS, ENGINE CIRCUIT BREAKER
2C17 RADIO, SPEAKERS AND ANTENNA 40 – 32 ( -660400) 40 – 69
3H9 RAILS, TINE SEPARTATOR MODULE 80 – 2 2E7 RELAYS, ENGINE CIRCUIT BREAKER
5B20 RASP BAR CONCAVE AND GRATE 120 – 12 (660401- ) 40 – 70
5B18 RASP BAR THRESHING CYLINDER 120 – 10 3F11 RELIEF VALVE MODULE, SOLENOID CONTROL 70 – 54
4B14 REAR AND SIDE SEALS, CAB 90 – 6 3F11 RELIEF VALVE, SOLENOID CONTROL – CONTOUR
3C18 REAR AXLE SPINDLE HOUSING 60 – 35 MASTER 70 – 54
3C23 REAR AXLE SPINDLES 60 – 40 1D14 REPAIR KIT, WATER PUMP (6076) 26 – 40
3C15 REAR AXLE SUPPORT 60 – 32 3E13 RESERVOIR HYDRAULIC UPPER RETURN LINES
3C14 REAR AXLE TRASH SHIELD 60 – 31 AND HOSES 70 – 32
3C16 REAR AXLE, ADJUSTABLE 60 – 33 3B13 RESERVOIR, BRAKE LINES AND MASTER
3C17 REAR AXLE, FIXED CYLINDER 60 – 6
(GRAIN) (655542- ) 60 – 34 3E16 RESERVOIR, OIL, MOUNTINGS, HYDRAULIC/
3J5 REAR CORNER SHEET, L H 80 – 46 HYDROSTATIC 70 – 35
3I5 REAR HOOD 80 – 22 2J15 RESERVOIR, RETURN LINE 50 – 86
3I9 REAR HOOD ACCESS DOOR AND STOP 80 – 26 4H11 RETROFIT INSTALLATION – LH SIDE
2D1 REAR HOOD AND MODULE WIRING HARNESSES 40 – 40 FEEDER HOUSE DUST FAN BELT 110 – 54
3I11 REAR HOOD DOOR 80 – 28 4H9 RETROFIT INSTALLATION-FEEDER CONVEYOR
3I1 REAR LADDER AND LANDING 80 – 18 DRIVE CHAIN,TIGHTENER AND GUIDES 110 – 52
3I3 REAR LADDER LANDING LATCH ARM 80 – 20 4H13 RETROFIT INSTALLATION-LH SIDE
6E14 REAR LEFT SIDE TAILINGS SHIELD 125 – 82 FEEDER HOUSE DUST FAN 110 – 56
2E21 REAR LIGHTS (EXPORT ONLY) 40 – 84 4D5 RETROFIT SEAT BELT KIT
1C21 REAR OIL SEAL (6076) 26 – 18 (MACHINES PRIOR TO 1996 MODEL YEAR) 90 – 46
1C21 REAR OIL SEAL GASKET (6076) 26 – 18 4H1 RETURN FLOOR, FEEDER HOUSE 110 – 44
1C21 REAR OIL SEAL HOUSING (6076) 26 – 18 2J15 RETURN LINE, RESERVOIR 50 – 86
5E10 REAR SHIELDS, MODULE 120 – 78 3E13 RETURN LINES AND HOSES, UPPER HYDRAULIC
3C11 REAR STEERING LINES AND HOSES 60 – 28 RESERVOIR 70 – 32
1B18 REAR SUPPORT, ENGINE MOUNTS 3E23 RETURN LINES, HYDRAULIC
(655401- ) 20 – 12 ( -655400) 70 – 42
6E14 REAR TAILINGS SHIELD, LEFT SIDE 125 – 82 3F1 RETURN LINES, HYDRAULIC
6J13 REAR WHEEL DECALS 170 – 46 (655401- ) 70 – 44
3C22 REAR WHEELS 60 – 39 4C21 REVERSER FOOT CONTROL, FEEDER HOUSE 90 – 38
3D1 REAR WHEELS AND WHEEL WEIGHTS 60 – 42 4F13 REVERSER FOOT CONTROL, FEEDER HOUSE 110 – 6
2D1 REAR, L H AND R H MAIN WIRING HARNESS 40 – 40 4F11 REVERSER GEAR BOX 110 – 4
6H20 REEL BELTS 170 – 4 4H5 REVERSER) 110 – 48
3D11 REEL DRIVE FLOW CONTROL VALVE 70 – 6 2E19 REVOLVING BEACON LIGHTS (EXPORT ONLY) 40 – 82
6D7 REEL DRIVE FLOW CONTROL VALVE 125 – 50 1C18 RINGS, PISTON (6076) (ESN 500000- ) 26 – 15
1D4 ROCKER ARM COVER 26 – 27
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-25
PN=25
1B2
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1D4 ROCKER ARM COVER GASKET 26 – 27 4B14 SEALS, REAR AND SIDE, CAB 90 – 6
1D3 ROCKER ARM SHAFT 26 – 26 2H21 SEALS, SHAFT, OUTER COVER AND BEARINGS
1D3 ROCKER ARMS 26 – 26 CAM LOBE MOTOR 50 – 42
6D5 ROD, KNOB, CONTROL AND CHECK VALVE, 3H15 SEALS, SHELL, RADIATOR 80 – 8
CHAFF SPREADER 125 – 48 4D6 SEAT ADJUST FORE-AND-AFT 90 – 48
1C18 RODS, CONNECTING (6076) 26 – 15 4D1 SEAT AND BACKREST, OPERATOR’S 90 – 42
1D3 RODS, PUSH 26 – 26 4D5 SEAT BELT KIT, RETROFIT
3C19 RODS, TIE, STEERING 60 – 36 (MACHINES PRIOR TO 1996 MODEL YEAR) 90 – 46
3H9 ROLLERS, FRONT MODULE 80 – 2 4D8 SEAT HEIGHT ADJUSTER, CAB 90 – 50
4B24 ROOF AND SUPPORTS, CAB 90 – 16 4C23 SEAT SHROUDS AND TRAINING SEAT 90 – 40
2B18 ROOF, CAB LIGHTS 40 – 8 4D10 SEAT, AIR SUSPENSION
6H19 ROTARY SCREEN BELTS 170 – 3 (660401- ) 90 – 52
1B10 ROTARY SCREEN DOOR AND SCREEN 20 – 4 4D12 SEAT, AIR SUSPENSION KITS
1B8 ROTARY SCREEN DRIVE 20 – 2 (665401- ) 90 – 54
6B18 ROTOR STRAW CHOPPER, FINE CUT (PADDLED 4D14 SEAT, AIR SUSPENSION KITS
NARROW (670401- ) 125 – 10 (665401- ) 90 – 56
6B16 ROTOR STRAW CHOPPER, FINE CUT (STRAIGHT 4D16 SEAT, AIR SUSPENSION KITS
NARROW (670401- ) 125 – 8 (665401- ) 90 – 58
6B20 ROTOR, SHEAVE AND STRAW CHOPPER 125 – 12 4D18 SEAT, AIR SUSPENSION KITS
(665401- ) 90 – 60
2C5 SEAT, AIR, WIRING HARNESS
S (660401- ) 40 – 20
4D3 SEAT, OPERATOR’S SEATBELT 90 – 44
6H22 SAFETY DECALS AND LOCATIONS 170 – 6 4D4 SEAT, SEATBELT – PASSENGER 90 – 45
6H24 SAFETY DECALS AND LOCATIONS 170 – 8 4D3 SEATBELT, OPERATOR’S SEAT 90 – 44
6I1 SAFETY DECALS AND LOCATIONS 170 – 10 4D4 SEATBELT, PASSENGER SEAT 90 – 45
6I3 SAFETY DECALS AND LOCATIONS 170 – 12 5H1 SECONDARY COUNTERSHAFT DRIVE 121 – 48
6I5 SAFETY DECALS AND LOCATIONS 170 – 14 5H1 SECONDARY COUNTERSHAFT DRIVE PULLEY 121 – 48
6I7 SAFETY DECALS AND LOCATIONS 170 – 16 2F10 SENSOR, BACKSHAFT SPEED, FEEDER HOUSE 40 – 98
6I9 SAFETY DECALS AND LOCATIONS 170 – 18 1E22 SENSOR, ENGINE SPEED 26 – 75
6I11 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 20 2F1 SENSOR, STUBBLE HEIGHT (EXPORT ONLY) 40 – 89
6I13 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 22 1E5 SENSOR, TEMPERATURE (6076HH030, HH034)
6I15 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 24 (ROBERT BOSCH)(LATE DESIGN) 26 – 58
6I17 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 26 2D7 SENSOR, UNLOADING AUGER
6I19 SAFETY DECALS AND LOCATIONS – FRENCH 170 – 28 (660401- ) 40 – 46
6I21 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 30 2C10 SENSORS AND BRACKETS, LOW SHAFT SPEED 40 – 25
6J1 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 34 5F21 SEPARATOR AND PUMP DRIVE, ENGINE
6J3 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 36 GEARCASE 121 – 20
6J5 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 38 5F23 SEPARATOR AND PUMP DRIVE, GEARCASE 121 – 22
6J7 SAFETY DECALS AND LOCATIONS – ITALIAN 170 – 40 5F13 SEPARATOR AND UNLOADING DRIVE GEAR,
4F23 SAFETY STOP, CONTOUR MASTER FEEDER HOUSE ENGINE GEARCASE 121 – 12
(660401-660432) 110 – 16 5F15 SEPARATOR DRIVE GEAR, UNLOADING DRIVE
4G1 SAFETY STOP, CONTOUR MASTER FEEDER HOUSE AND STRAW CHOPPER, ENGINE GEARCASE 121 – 14
(661186- ) 110 – 18 3I13 SEPARATOR DRIVE SIDE SHIELDS 80 – 30
4F21 SAFETY STOP, DRIVE SHIELDS, FEEDER HOUSE 110 – 14 5F17 SEPARATOR DRIVE WET-CLUTCH AND PUMP
6H7 SAMPLING TROUGH, GRAIN TANK 130 – 62 DRIVE SHAFT, GEARCASE 121 – 16
1B8 SCREEN DRIVE, ROTARY 20 – 2 5H7 SEPARATOR FAN DRIVE 121 – 54
1B10 SCREEN, ROTARY DOOR 20 – 4 2D20 SEPARATOR FAN DRIVE ADJUSTING MOTOR 40 – 59
4E21 SEAL, A/C COMPRESSOR 3H11 SEPARATOR FRAME 80 – 4
(650401- ) R134A 90 – 90 6J17 SEPARATOR MODULE SAFETY DECALS 170 – 51
4E24 SEAL, A/C COMPRESSOR KIT 5E20 SEPARATOR TINES, MODULE 120 – 88
(650401- ) R134A 90 – 93 5B10 SEPARATOR/FEEDER HOUSE SEAL, STONE TRAP
2D11 SEAL, DEFLECTOR – LESS HARVESTRAK AND DOOR 120 – 2
(655542- ) 40 – 50 3H9 SEPARATOR, MODULE RAILS 80 – 2
1C23 SEAL, FRONT OIL (6076) 26 – 20 1F4 SEPARATOR, WATER 30 – 4
3B9 SEAL, PARKING BRAKE PEDAL 60 – 2 3J1 SERVICE ACCESS SHIELD, L H 80 – 42
1C21 SEAL, REAR OIL (6076) 26 – 18 3I23 SERVICE ACCESS SHIELD, R H 80 – 40
5B10 SEAL, STONE TRAP AND DOOR, SEPARATOR/ 2F16 SERVICE KIT, ELECTRICAL CONNECTORS 40 – 104
FEEDER HOUSE 120 – 2 2F18 SERVICE KIT, ELECTRICAL CONNECTORS 40 – 106
1D12 SEAL, WATER PUMP 26 – 38 2F5 SERVICE OUTLET, ELECTRICAL 40 – 93
4G5 SEALS, FEEDER HOUSE – CONTOUR MASTER 2H9 SERVO CYLINDERS, HYDROSTATIC DRIVE PUMP 50 – 30
(660401- ) 110 – 22 4E18 SET, COMPRESSOR HARDWARE
4B12 SEALS, FOAM, SOUND DEADENING, CAB 90 – 4 ( -650400) R-12 90 – 86
6D1 SEALS, PAN AND WINGS, CHAFF SPREADER 6D19 SHAFT AND TIGHTENER, LOWER TAILINGS
(DUAL MOTOR) (650401- ) 125 – 44 AUGER 125 – 62
6C24 SEALS, PAN, CHAFF SPREADER (BELT TYPE) 5F3 SHAFT, COUPLING AND GEARBOX, MODULE 121 – 2
( -650400) 125 – 42
10-26 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=26
1B3
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
4H5 SHAFT, DRIVE, FRONT, SHEAVE AND 2E4 SHOE ADJUSTING LIGHT SWITCH 40 – 67
MOUNTINGS (FIXED SPEED WITH REVERSER) 110 – 48 5C19 SHOE GRAIN SUPPLY AUGER CLEANOUT DOOR,
4F15 SHAFT, FRONT WITH REVERSER (VARIABLE) HANDLE AND LATCHES 120 – 36
9400, 9500 COMBINES 110 – 8 5C20 SHOE GRAIN SUPPLY AUGERS AND HOUSING 120 – 38
2H5 SHAFT, HYDROSTATIC DRIVE PUMP 50 – 26 5C22 SHOE GRAIN SUPPLY AUGERS AND HOUSING 120 – 40
2H21 SHAFT, OUTER COVER, BEARING AND SEALS 3B17 SHOES, BRAKE 60 – 10
CAM LOBE MOTOR 50 – 42 1C13 SHORT BLOCK
1D3 SHAFT, ROCKER ARM 26 – 26 (WITH HEAD BOLTS) 26 – 10
2G22 SHAFTS, DIFFERENTIAL 50 – 18 1C11 SHORT BLOCK (WITHOUT HEAD BOLTS) 26 – 8
2H3 SHAFTS, FINAL DRIVE 50 – 24 1E15 SHORT BLOCK GASKET KIT (6076) 26 – 68
5E3 SHAKER PAN 5C24 SHROUDS AND FANS, CLEANING 120 – 42
( -655400) 120 – 70 5D1 SHROUDS AND FANS, CLEANING 120 – 44
5E5 SHAKER PAN 4C23 SHROUDS, SEAT 90 – 40
(655401-665400) 120 – 72 1E5 SHUT-OFF HOUSING SOLENOID (ROBERT BOSCH)
5E7 SHAKER PAN (6076HH030, HH034) (LATE DESIGN) 26 – 58
(665401- ) 120 – 74 4B14 SIDE AND REAR SEALS, CAB 90 – 6
5H17 SHEAVE AND CHARGE PUMP MOUNTING, REEL/ 2D23 SIDE FINDER LIGHTS, L H AND R H 40 – 62
BELT PICKUP 121 – 64 3I13 SIDE SHIELDS, SEPARATOR DRIVE 80 – 30
5C15 SHEAVE AND GEARCASE, BEATER 120 – 32 5H3 SIEVE AND CHAFFER DRIVE, CONVEYOR AUGERS 121 – 50
6F16 SHEAVE AND GEARCASE, CLEAN GRAIN 5D23 SIEVE ELEMENT 120 – 66
ELEVATOR 130 – 20 5E1 SIEVE FRAME 120 – 68
5H13 SHEAVE LINKAGE, FAN DRIVE SPEED CONTROL 121 – 60 5G12 SINGLE RANGE CYLINDER DRIVE 121 – 35
4F9 SHEAVE, MOUNTINGS, FRONT VARIABLE 3G1 SIX STACK SOLENOID CONTROL VALVE MODULE
DRIVE 110 – 2 ASSEMBLY & MOUNTINGS (660401- ) 70 – 72
4H3 SHEAVE, MOUNTINGS, UPPER DRIVE SHAFT 110 – 46 3B19 SLAVE CYLINDER, BRAKE 60 – 12
6B20 SHEAVE, ROTOR AND STRAW CHOPPER 125 – 12 4G22 SLIP CLUTCH,FEEDER HOUSE 110 – 40
6F7 SHEAVE, SHAFT AND SPROCKET, UPPER 5G11 SLOW SPEED CYLINDER DRIVE 121 – 34
CLEAN GRAIN ELEVATOR 130 – 10 1F10 SOLDENOID, ETHER START
4G24 SHEAVES, FEEDER HOUSE, UPPER (655615- ) 30 – 10
COUNTERSHAFT, VARIABLE DRIVE 110 – 42 3F11 SOLENOID CONTROL RELIEF VALVE MODULE 70 – 54
3J7 SHEET AND DOOR, L H FRONT CORNER 80 – 48 3F21 SOLENOID CONTROL VALVE – CONTOUR MASTER
3J3 SHEET, FRONT CORNER, R H 80 – 44 (660401- ) 70 – 66
3J5 SHEET, REAR CORNER, L H 80 – 46 3F25 SOLENOID CONTROL VALVE BRACKETS 70 – 70
4G5 SHELL, FEEDER HOUSE-CONTOUR MASTER 3F16 SOLENOID CONTROL VALVE DOUBLE PILOTED
(660401- ) 110 – 22 MODULE, AUGER SWING 70 – 60
3H15 SHELL, SEALS, RADIATOR 80 – 8 3F19 SOLENOID CONTROL VALVE FOR REEL FORE/AFT
3I21 SHIELD, DRIVE, R H REAR 80 – 38 (650401- ) 70 – 64
1D1 SHIELD, EXHAUST VALVE (6076) 26 – 24 3F14 SOLENOID CONTROL VALVE FOR REEL LIFT/
4H15 SHIELD, INTAKE 110 – 58 VARIABLE AND CYLINDER SPEED 70 – 58
3I23 SHIELD, R H SERVICE ACCESS 80 – 40 3F23 SOLENOID CONTROL VALVE MODULE ASSEMBLY
6E14 SHIELD, REAR TAILINGS LEFT SIDE 125 – 82 AND MOUNTINGS 70 – 68
3J1 SHIELD, SERVICE ACCESS, L H 80 – 42 3G1 SOLENOID CONTROL VALVE MODULE, 6 STACK
6E12 SHIELD, TAILINGS UPPER REAR 125 – 80 ASSEMBLY & MOUNTINGS (660401- ) 70 – 72
3C14 SHIELD, TRASH, REAR AXLE 60 – 31 3F12 SOLENOID CONTROL VALVE UNBALANCED LOAD
6E8 SHIELD, UPPER TAILINGS AUGER DRIVE 125 – 76 MODULE (HEADER LIFT MODULE) 70 – 56
6E10 SHIELD, UPPER TAILINGS AUGER DRIVE 125 – 78 3F17 SOLENOID CONTROL VALVE, AUGER SWING 70 – 61
6C22 SHIELDS AND HANDLES, CHAFF SPREADER 3H5 SOLENOID CONTROL VALVE, ENGINE GEARCASE,
(DUAL MOTOR) (650401- ) 125 – 40 PRESSURE REGULATOR 70 – 100
3I17 SHIELDS, AUGER DRIVE (R-H SIDE) 80 – 34 1E21 SOLENOID SWITCH, STARTER (6076) 26 – 74
5D3 SHIELDS, CLEANING FAN INTAKE 120 – 46 2I10 SOLENOID, CONTROL VALVE 50 – 56
4F23 SHIELDS, CONTOURMASTER FEEDER HOUSE 6H13 SOLENOID, MAIN VALVE BLOCK
(660401-660432) 110 – 16 DIAL-A-MATIC HEADER HEIGHT CONTROL 160 – 3
4G1 SHIELDS, CONTOURMASTER FEEDER HOUSE 1E5 SOLENOID, SHUT-OFF HOUSING (RB)
(661186- ) 110 – 18 (6076HH030, HH034) (LATE DESIGN) 26 – 58
2H7 SHIELDS, FINAL DRIVE SHAFT 50 – 28 1E19 SOLENOID, STARTER (12V F4) 26 – 72
6C20 SHIELDS, HANDLES AND FRAME, CHAFF 3E15 SOLENOID, VALVE BLOCK, DIAL-A-MATIC,
SPREADER (BELT TYPE) ( -650400) 125 – 38 HEADER HEIGHT CONTROL 70 – 34
2I11 SHIELDS, MUD 50 – 57 4B12 SOUND DEADENING, FOAM AND SEALS, CAB 90 – 4
3J9 SHIELDS, MUD (R H SIDE) 80 – 50 2G9 SPACERS, AXLE 50 – 5
3I19 SHIELDS, MUD AND FAN DRIVE (L H SIDE) 80 – 36 2C17 SPEAKERS, ANTENNA AND RADIO 40 – 32
5E10 SHIELDS, REAR MODULE 120 – 78 5H9 SPEED CONTROL LINKAGE, FAN DRIVE
3I13 SHIELDS, SIDE, SEPARATOR DRIVE 80 – 30 ( -655400) 121 – 56
6F20 SHIELDS, UPPER CLEAN GRAIN ELEVATOR 130 – 24 5H11 SPEED CONTROL LINKAGE, FAN DRIVE
2G24 SHIFTER CAM, TRANSMISSION AND (655401- ) 121 – 58
DIFFERENTIAL 50 – 20 5H13 SPEED CONTROL, FAN DRIVE SHEAVE LINKAGE 121 – 60
2G10 SHIFTER FORKS 50 – 6 5C1 SPIKE TOOTH CONCAVE 120 – 18
1C18 SHIM, LINER (6076) 26 – 15 5B22 SPIKE TOOTH THRESHING CYLINDER 120 – 14
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-27
PN=27
1B4
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
5B24 SPIKE-TOOTH CONCAVE 120 – 16 6C6 STRAW SPREADER 125 – 24
3C18 SPINDLE HOUSING, REAR AXLE 60 – 35 6C14 STRAW SPREADER DOOR 125 – 32
3C23 SPINDLES, REAR AXLE 60 – 40 6C8 STRAW SPREADER DRIVES 125 – 26
6C10 SPREADER CURTAIN, UPPER 125 – 28 6C12 STRAW SPREADER FRAME AND LOWER CURTAIN 125 – 30
6C12 SPREADER FRAME, STRAW AND LOWER CURTAIN 125 – 30 5C7 STRIPPER BEATER 120 – 24
3D14 SPREADER MOTOR, CHAFF 5C5 STRIPPER BEATER DRIVE IDLER 120 – 22
(EATON) (655929- ) 70 – 9 2F1 STUBBLE HEIGHT SENSOR (EXPORT ONLY) 40 – 89
6C6 SPREADER, STRAW 125 – 24 2F22 SUPPLEMENTARY TERMINALS AND CONNECTORS 40 – 110
6H20 SPREADER, STRAW, BELTS 170 – 4 4B22 SUPPORT AND FRAME, CAB 90 – 14
6F7 SPROCKET, SHEAVE AND SHAFT, UPPER 3B20 SUPPORT BRACKET, BRAKE CABLE
CLEAN GRAIN ELEVATOR 130 – 10 (645510- ) 60 – 13
6D25 SPROCKETS, BEARINGS AND CHAIN, TAILINGS 6D3 SUPPORT, MOUNTING, CHAFF SPREADER 125 – 46
ELEVATOR CONVEYOR 125 – 68 3C15 SUPPORT, REAR AXLE 60 – 32
1C22 STARTER GEAR (6076) 26 – 19 3I7 SUPPORTS AND MOUNTING TRACKS, MODULE 80 – 24
1E19 STARTER SOLENOID (12V F4) 26 – 72 4B24 SUPPORTS AND ROOF, CAB 90 – 16
1E18 STARTER SOLENOID COVER (DENSO) 26 – 71 5G9 SUPPORTS AND VARIABLE SHEAVE, PRIMARY
1E21 STARTER SOLENOID SWITCH (6076) 26 – 74 COUNTERSHAFT 121 – 32
1F8 STARTING AID, COLD WEATHER 1F2 SUPPORTS, FUEL TANK 30 – 2
( -655614) 30 – 8 4G24 SUPPORTS, UPPER COUNTERSHAFT, FEEDER
1F10 STARTING AID, COLD WEATHER HOUSE, VARIABLE DRIVE 110 – 42
(655615- ) 30 – 10 2H9 SWASHPLATE, HYDROSTATIC DRIVE PUMP 50 – 30
1D25 STARTING FITTINGS, ETHER (6076) 26 – 53 1E19 SWITCH (DENSO) (12V F4) 26 – 72
1E18 STARTING MOTOR (DENSO) 6G13 SWITCH AND HUB SUPPORT, HORIZONTAL
(12V F4) 26 – 71 UNLOADING AUGER 130 – 42
2I6 STEERING ARM 50 – 52 2C9 SWITCH, AIR CONDITIONER 40 – 24
3C3 STEERING COLUMN (LOWER) 60 – 20 2B14 SWITCH, AUX FIELD LIGHTS, OPTIONAL 40 – 4
3C1 STEERING COLUMN (UPPER) 60 – 18 2C9 SWITCH, HEATER 40 – 24
4E2 STEERING COLUMN (UPPER) 90 – 70 6G14 SWITCH, HORIZONTAL UNLOADING AUGER 130 – 43
2C1 STEERING COLUMN WIRING HARNESS 2G12 SWITCH, HYDROSTATIC DRIVE LEVER AND CABL
(646237-) 40 – 16 E 50 – 8
4E4 STEERING COLUMN, LOWER 90 – 72 2D12 SWITCH, INLET AIR TEMPERTURE 40 – 51
3C13 STEERING CYLINDER (4-WHEEL DRIVE) 60 – 30 2E4 SWITCH, LIGHT, SHOE ADJUSTING 40 – 67
3C5 STEERING HOSES AND LINES, FRONT 60 – 22 2D5 SWITCH, LIMIT, GRAIN TANK 40 – 44
3B23 STEERING HOSES, UPPER 60 – 16 1E21 SWITCH, STARTER SOLENOID (6076) 26 – 74
3C11 STEERING LINES AND HOSES, REAR 60 – 28 2D17 SWITCH, WARNING ENGINE PLUGGED AIR
3C7 STEERING LINES, L H 60 – 24 FILTER 40 – 56
3C9 STEERING LINES, R H SIDE 60 – 26 6G11 SWIVEL SUPPORT AND BRACES, AUGER 130 – 40
3B21 STEERING PUMP 60 – 14 6G9 SWIVEL, HORIZONTAL UNLOADING AUGER 130 – 38
3C19 STEERING TIE RODS, ADJUSTABLE REAR AXLE 60 – 36
3C21 STEERING TIE RODS, FIXED REAR AXLE
GRAIN (655542- ) 60 – 38 T
3C20 STEERING TIE RODS, FIXED REAR AXLE,
4-WHEEL DRIVE – GRAIN (655542- ) 60 – 37 2B16 TACHOMETER 40 – 6
3H23 STEP AND PLATFORM, ENGINE ACCESS 80 – 16 4C17 TACHOMETER 90 – 34
5B10 STONE TRAP, DOOR AND SEAL, SEPARATOR/ 2B19 TAIL LIGHTS 40 – 9
FEEDER HOUSE 120 – 2 6E1 TAILINGS DRIVE BRACKET AND LOWER TROUGH
3I9 STOP AND REAR HOOD ACCESS DOOR 80 – 26 SUPPORT 125 – 69
1E23 STRAP, ALTERNATOR ADJUSTING 26 – 76 6D25 TAILINGS ELEVATOR CONVEYOR CHAIN,
1E23 STRAP, ALTERNATOR SUPPORT 26 – 76 SPROCKETS AND BEARINGS 125 – 68
1D5 STRAPS, ENGINE LIFT 26 – 28 6D23 TAILINGS ELEVATOR HOUSING 125 – 66
6H20 STRAW CHOPPER BELTS 170 – 4 6E14 TAILINGS SHIELD, REAR LEFT SIDE 125 – 82
6B10 STRAW CHOPPER DECK, SUPPORTS AND FINS 125 – 2 6E12 TAILINGS SHIELD, UPPER REAR 125 – 80
5H19 STRAW CHOPPER DRIVES 121 – 66 3I11 TAILLIGHT WIRING HARNESS 80 – 28
6B22 STRAW CHOPPER HOUSING AND KNIFEBANK 125 – 14 6F24 TANK BASE, GRAIN 130 – 28
6B24 STRAW CHOPPER HOUSING AND KNIFEBANK 125 – 16 6H1 TANK CROSS AUGERS, GRAIN 130 – 54
6C3 STRAW CHOPPER LOWER DOOR 125 – 20 1F6 TANK FUEL LINES AND FITTINGS 30 – 6
6B18 STRAW CHOPPER ROTOR, FINE CUT (PADDLED 1F18 TANK, COOLANT RECOVERY 30 – 18
NARROW (670401- ) 125 – 10 1F2 TANK, FUEL 30 – 2
6B16 STRAW CHOPPER ROTOR, FINE CUT (STRAIGHT 6H7 TANK, GRAIN, SAMPLING TROUGH 130 – 62
NARROW (670401- ) 125 – 8 6F22 TANK, GRAIN, TOP 130 – 26
6C1 STRAW CHOPPER UPPER REAR DOOR 125 – 18 2B16 TEMPERATURE GAUGE, ENGINE 40 – 6
6B20 STRAW CHOPPER, ROTOR AND SHEAVE 125 – 12 4C17 TEMPERATURE GAUGE, ENGINE 90 – 34
6B12 STRAW CHOPPER, TRI ROTOR 1E5 TEMPERATURE SENSOR (6076HH030, HH034)
( -655400) 125 – 4 (ROBERT BOSCH)(LATE DESIGN) 26 – 58
6B14 STRAW CHOPPER, TRI ROTOR (655401- ) 125 – 6 2F20 TERMINAL AND WIRING KIT 40 – 108
5F15 STRAW CHOPPER, UNLOADING DRIVE AND 2F22 TERMINALS AND CONNECTORS, SUPPLEMENTARY 40 – 110
SEPARATOR DRIVE GEAR, ENGINE GEARCASE 121 – 14
10-28 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=28
1B5
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
1E13 TERMINALS, ELECTRICAL, WEATHERPACK 1D20 TURBOCHARGER GASKET 26 – 48
(6076) 26 – 66 1D20 TURBOCHARGER OIL LINES
2F14 TERMINALS, WEATHERPACK 40 – 102 (ESN 500000- ) 26 – 48
1D15 THERMOSTAT HOUSING, FRONT 26 – 42 2B19 TURN LIGHTS 40 – 9
5B9 THRESHING CYLINDER COVER 120 – 1
5B18 THRESHING CYLINDER, RASP BAR 120 – 10
5B22 THRESHING CYLINDER, SPIKE TOOTH 120 – 14 U
1C20 THRUST BEARING (6076) 26 – 17
3C19 TIE RODS, STEERING, ADJUSTABLE REAR AXLE 60 – 36 1C17 UNDERHAUL KIT, ENGINE (STD BRGS)
3C21 TIE RODS, STEERING, FIXED REAR AXLE (6076) 26 – 14
GRAIN (655542- ) 60 – 38 5F13 UNLOADING AND SEPARATOR DRIVE GEAR,
3C20 TIE RODS, STEERING, 4-WHEEL DRIVE FIXED ENGINE GEARCASE 121 – 12
REAR AXLE – GRAIN (655542- ) 60 – 37 6H20 UNLOADING AUGER BELTS 170 – 4
6D19 TIGHTENER AND SHAFT, LOWER TAILINGS 6H4 UNLOADING AUGER COUNTERSHAFT DRIVE 130 – 58
AUGER 125 – 62 6H6 UNLOADING AUGER DRIVE BELT GUIDE 130 – 60
5G17 TIGHTENER, CYLINDER DRIVE, DUAL-RANGE 121 – 40 6G20 UNLOADING AUGER HOUSING, HORIZONTAL
6E3 TIGHTENER, DRIVE CHAIN, UPPER TAILINGS 125 – 71 (EXPORT) (17 AND 20 FT ) 130 – 49A
4F17 TIGHTENER, DRIVE, VARIABLE SPEED 110 – 10 6G16 UNLOADING AUGER HOUSING, HORIZONTAL
5H15 TIGHTENER, FEEDER HOUSE DRIVE 121 – 62 (14- AND 17-FT ) 130 – 46
4G18 TIGHTENER, GUIDES AND FEEDER CONVEYOR 6G18 UNLOADING AUGER HOUSING, HORIZONTAL
DRIVE CHAIN 110 – 36 (17- AND 20-FT ) 130 – 48
4H9 TIGHTENER, GUIDES AND FEEDER CONVEYOR 2D21 UNLOADING AUGER LIGHT, GRAIN TANK 40 – 60
DRIVE CHAIN-RETROFIT INSTALLATION 110 – 52 6H9 UNLOADING AUGER LUBE BANK 130 – 64
4G7 TILT BEAM, FEEDER HOUSE, CONTOUR MASTER 2D7 UNLOADING AUGER SENSOR AND WIRING
(660401- ) 110 – 24 HARNESS (660401- ) 40 – 46
3G17 TILT CYLINDER – CONTOUR MASTER 3G11 UNLOADING AUGER SWING CYLINDER AND
(660401- ) 70 – 88 MOUNTING 70 – 82
3G19 TILT CYLINDER HOSES AND FITTINGS – 3G13 UNLOADING AUGER SWING CYLINDER AND
CONTOUR MASTER (660401- ) 70 – 90 MOUNTING (650401-655551) 70 – 84
1C23 TIMING GEAR COVER (6076) 26 – 20 3G15 UNLOADING AUGER SWING HYDRAULIC CYLINDER
1C23 TIMING GEAR COVER GASKET (6076) 26 – 20 (655552- ) 70 – 86
3H9 TINE SEPARATOR MODULE RAILS 80 – 2 3G7 UNLOADING AUGER SWING HYDRAULIC CYLINDER
5E20 TINE SEPARATORS, MODULE 120 – 88 LINES AND HOSES 70 – 78
4C7 TOOL BOX 3G15 UNLOADING AUGER SWING HYDRAULIC MOUNTING
(660401- ) 90 – 24 (655552- ) 70 – 86
6J16 TOP DECALS 170 – 50 3G9 UNLOADING DRIVE CYLINDER, GRAIN TANK 70 – 80
1C5 TORQ-GARD ENGINE OIL 26 – 1 5F15 UNLOADING DRIVE, STRAW CHOPPER AND
4C23 TRAINING SEAT 90 – 40 SEPARATOR DRIVE GEAR, ENGINE GEARCASE 121 – 14
1E8 TRANSFER PUMP, FUEL (ROBERT BOSCH) 6H21 UNLOADING SYSTEM BELTS 170 – 5
(6076HH030, HH034) 26 – 61 6F5 UPPER CLEAN GRAIN ELEVATOR 130 – 8
6F9 TRANSITION AUGER HOUSING 130 – 12 6F7 UPPER CLEAN GRAIN ELEVATOR SHAFT,
2G11 TRANSMISSION SPROCKET AND SHEAVE 130 – 10
(655429- ) 50 – 7 6F20 UPPER CLEAN GRAIN ELEVATOR SHIELDS 130 – 24
2G24 TRANSMISSION AND DIFFERENTIAL 6F9 UPPER CLEAN GRAIN LOADING AUGER HOUSING 130 – 12
HOUSING COVER AND SHIFTER CAM 50 – 20 6F11 UPPER CLEAN GRAIN LOADING AUGER HOUSING
2G10 TRANSMISSION AND DIFFERENTIAL HOUSING (660401- ) 130 – 14
AND SHIFTER FORKS 50 – 6 4H3 UPPER DRIVE SHAFT FIXED SPEED WITH
2G18 TRANSMISSION INPUT SHAFT, GEARS, LUBE REVERSER 110 – 46
PUMP AND BEARINGS 50 – 14 2E13 UPPER HARNESS CONNECTORS FOR 6076 ENGINE 40 – 76
2G20 TRANSMISSION PINION SHAFT, GEARS AND 2D13 UPPER HARNESS FOR 6076 ENGINE 40 – 52
BEARINGS 50 – 16 2I24 UPPER HYDROSTATIC DRIVE HOSES
2F8 TRANSPORT WARNING LIGHTS 40 – 96 (FOUR WHEEL DRIVE)(655401- ) 50 – 70
3C14 TRASH SHIELD, REAR AXLE 60 – 31 6C1 UPPER REAR DOOR, STRAW CHOPPER 125 – 18
6B12 TRI ROTOR STRAW CHOPPER 6E12 UPPER REAR TAILINGS SHIELD 125 – 80
( -655400) 125 – 4 3E13 UPPER RETURN LINES AND HOSES, HYDRAULIC
6B14 TRI ROTOR STRAW CHOPPER (655401- ) 125 – 6 RESERVOIR 70 – 32
4B16 TRIM PANELS, CAB INTERIOR 90 – 8 4G12 UPPER SHAFT, FEEDER HOUSE 110 – 30
6E1 TROUGH SUPPORT,LOWER AND TAILINGS DRIVE 6C10 UPPER SPREADER CURTAIN 125 – 28
BRACKET 125 – 69 3C1 UPPER STEERING COLUMN 60 – 18
6H7 TROUGH, GRAIN TANKSAMPLING 130 – 62 4E2 UPPER STEERING COLUMN 90 – 70
6D21 TROUGH, LOWER TAILINGS AUGER 125 – 64 6H21 UPPER TAILINGS AUGER BELT 170 – 5
1C25 TUBE, ENGINE OIL DIPSTICK (6076) 26 – 22 6E8 UPPER TAILINGS AUGER DRIVE 125 – 76
1F12 TUBES, AIR CLEANER AND INTAKE 30 – 12 6E10 UPPER TAILINGS AUGER DRIVE 125 – 78
1D20 TURBOCHARGER 6E6 UPPER TAILINGS AUGER HOUSING AND PADDLE
(ESN 500000- ) 26 – 48 ASSEMBLY 125 – 74
1D22 TURBOCHARGER CENTER HOUSING (AIRESEARCH) 26 – 50 6E8 UPPER TAILINGS AUGER, DRIVE AND SHIELD 125 – 76
1D23 TURBOCHARGER CENTER HOUSING (SCHWITZER) 26 – 51 6E10 UPPER TAILINGS AUGER, DRIVE AND SHIELD 125 – 78
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-29
PN=29
1B6
CTS COMBINE (NORTH AMERICAN VERSION)
ALPHABETICAL INDEX – CONTINUED
GRID PAGE GRID PAGE
6E3 UPPER TAILINGS DRIVE CHAIN TIGHTENER 125 – 71 1D12 WATER PUMP GASKET 26 – 38
2I22 UPPER, HYDROSTATIC DRIVE OIL HOSES 1D12 WATER PUMP IMPELLER 26 – 38
( -655400) 50 – 68 1D14 WATER PUMP REPAIR KIT (6076) 26 – 40
1D12 WATER PUMP SEAL 26 – 38
1F4 WATER SEPARATOR 30 – 4
V 4G5 WEAR PLATES, FEEDER HOUSE – CONTOUR
MASTER (660401- ) 110 – 22
6H12 VALVE BLOCK AND HYDRAULIC LINE, 1E13 WEATHERPACK CONNECTORS (6076) 26 – 66
DIAL-A-MATIC HEADER HEIGHT CONTROL 160 – 2 2F14 WEATHERPACK CONNECTORS AND TERMINALS 40 – 102
3E15 VALVE BLOCK SOLENOID, DIAL-A-MATIC, 1E13 WEATHERPACK TERMINALS (6076) 26 – 66
HEADER HEIGHT CONTROL 70 – 34 2F14 WEATHERPACK TERMINALS AND CONNECTORS 40 – 102
3G1 VALVE MODULE, SIX STACK SOLENOID CONTROL 1D12 WEEP HOLE FILTER (WATER PUMP) 26 – 38
ASSEMBLY & MOUNTINGS (660401- ) 70 – 72 3D1 WEIGHTS, WHEELS, REAR 60 – 42
1D1 VALVE SEAT INSERTS (6076) 26 – 24 3G21 WET CLUTCH OIL COOLER LINES AND HOSES
3F16 VALVE, AUGER SWING, DOUBLE PILOTED, ( -665400) 70 – 92
SOLENOID CONTROL VALVE 70 – 60 3G23 WET CLUTCH OIL COOLER LINES AND HOSES
2I8 VALVE, CONTROL ( -655400) 50 – 54 (665401- ) 70 – 94
2I9 VALVE, CONTROL (655401- ) 50 – 55 2G6 WHEEL, HIGH FLOATATION DRIVE
2I10 VALVE, CONTROL, SOLENOID 50 – 56 PLANETARY FINAL DRIVE 50 – 2
1E11 VALVE, FUEL CHECK (6076HH030, HH034) 26 – 64 2G5 WHEELS, DRIVE 50 – 1
2H14 VALVE, HYDROSTATIC MOTOR 50 – 35 2G7 WHEELS, DUAL, WIDE-SPACED 50 – 3
1D9 VALVE, OIL FILTER BYPASS 26 – 34 3C22 WHEELS, REAR 60 – 39
1D11 VALVE, OIL PAN DRAIN 26 – 36 3D1 WHEELS, REAR AND WHEEL WEIGHTS 60 – 42
1D9 VALVE, OIL PRESSURE REGULATING 26 – 34 2G7 WIDE-SPACED DUAL WHEELS 50 – 3
6D11 VALVE, PUMP, LINES AND HOSES, CHAFF 3I15 WINDROW ATTACHMENT (660714- ) 80 – 32
SPREADER 125 – 54 2C15 WINDSHIELD WASHER 40 – 30
3D11 VALVE, REEL DRIVE FLOW CONTROL 70 – 6 2C11 WINDSHIELD WIPER (LONG) 40 – 26
3F21 VALVE, SOLENOID CONTROL – CONTOUR MASTER 2C13 WINDSHIELD WIPER, (SHORT) 40 – 28
(660401- ) 70 – 66 6D1 WINGS, SEALS AND PAN, CHAFF SPREADER
3F23 VALVE, SOLENOID CONTROL MODULE ASSEMBLY (DUAL MOTOR) (650401- ) 125 – 44
AND MOUNTINGS 70 – 68 2C11 WIPER, WINDSHIELD (LONG) 40 – 26
3F11 VALVE, SOLENOID CONTROL RELIEF – CONTOUR 2C13 WIPER, WINDSHIELD (SHORT) 40 – 28
MASTER 70 – 54 2F20 WIRING AND TERMINAL KIT 40 – 108
3F12 VALVE, SOLENOID CONTROL, HEADER LIFT 1E3 WIRING HARNESS (6076HH030)
MODULE 70 – 56 (EARLY DESIGN) 26 – 56
3F14 VALVE, SOLENOID CONTROL, REEL LIFT/ 1E5 WIRING HARNESS (6076HH030, HH034)
VARIABLE AND CYLINDER SPEED 70 – 58 (ROBERT BOSCH)(LATE DESIGN) 26 – 58
4E17 VALVES, COMPRESSOR SERVICE 2C5 WIRING HARNESS, A/C, HEATER AND AIR SEAT
( -650400) R-12 90 – 85 (660401- ) 40 – 20
1D1 VALVES, EXHAUST (6076) 26 – 24 2C3 WIRING HARNESS, AIR CONDITIONER
1D1 VALVES, INTAKE (6076) 26 – 24 ( -660400) 40 – 18
3D15 VARIABLE DRIVE HYDRAULIC HOSE, FEEDER 2B22 WIRING HARNESS, ARMREST 40 – 12
HOUSE 70 – 10 2B12 WIRING HARNESS, CAB 40 – 2
4G24 VARIABLE DRIVE, FEEDER HOUSE, UPPER 2C21 WIRING HARNESS, FRONT, L H MAIN 40 – 36
COUNTERSHAFT 110 – 42 2D5 WIRING HARNESS, GRAIN TANK 40 – 44
4F15 VARIABLE FRONT SHAFT WITH REVERSER 2D9 WIRING HARNESS, HARVESTRAK MONITOR 40 – 48
9400, 9500 COMBINES 110 – 8 2C3 WIRING HARNESS, HEATER
5G9 VARIABLE SHEAVE AND SUPPORTS, PRIMARY ( -660400) 40 – 18
COUNTERSHAFT 121 – 32 2D1 WIRING HARNESS, L H AND R H REAR 40 – 40
4F17 VARIABLE SPEED DRIVE TIGHTENER 110 – 10 2C23 WIRING HARNESS, L H MAIN, CENTER 40 – 38
4G24 VARIBLE DRIVE, FEEDER HOUSE, UPPER 2C19 WIRING HARNESS, MAIN, L H FRONT 40 – 34
COUNTERSHAFT SUPPORTS 110 – 42 2D1 WIRING HARNESS, MODULE 40 – 40
6G5 VERTICAL AUGER LOWER GEAR CASE 130 – 34 2D3 WIRING HARNESS, R H MAIN 40 – 42
6G7 VERTICAL UNLOADING AUGER AND CHARGE 2D1 WIRING HARNESS, REAR HOOD 40 – 40
HOUSING 130 – 36 2C1 WIRING HARNESS, STEERING COLUMN
2E1 VOLTAGE REGULATOR, ALTERNATOR – BOSCH 40 – 64 (646237-) 40 – 16
3I11 WIRING HARNESS, TAILLIGHT 80 – 28
2D7 WIRING HARNESS, UNLOADING AUGER
W (660401- ) 40 – 46
6H18 WALKER BELTS 170 – 2
2F8 WARNING LIGHTS, TRANSPORT 40 – 96 Y
2C15 WASHER, WINDSHIELD 40 – 30
1D15 WATER MANIFOLD GASKET 26 – 42 2I4 YOKE, PIVOTS AND CAPS 50 – 50
1D15 WATER MANIFOLD, FRONT 26 – 42
1D12 WATER PUMP 26 – 38
1D12 WATER PUMP BEARING 26 – 38
10-30 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)
PN=30
ENGINE FAN, INTERCOOLER AND SCREENS
MEMORANDA
CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 20-1
PN=

Customer Support: [email protected]

https://vimeo.com/743326216

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

I.G