John Deere GREENSTAR YIELD MAPPING AND MONITORING SYSTEM parts catalog Manual – PDF DOWNLOAD

Description

John Deere GREENSTAR YIELD MAPPING AND MONITORING SYSTEM parts catalog Manual – PDF DOWNLOAD

DESCRIPTION:

John Deere GREENSTAR YIELD MAPPING AND MONITORING SYSTEM parts catalog Manual – PDF DOWNLOAD

BOX-ENCLOSED ILLUSTRATIONS
A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A
SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.
KITS
KIT INFORMATION WILL BE FOUND IMMEDIATELY FOLLOWING THE STORY IN WHICH IT IS USED.THE ILLUSTRATION
IS REPEATED WITH ONLY THE KIT PARTS CALLED OUT AND WITH ALL OTHER PARTS SHOWN IN PHANTOM.
JDM REMANUFACTURED COMPONENTS
THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS.
ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE
REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR
NOT USABLE.
BOLT AND CAP SCREW STRENGTH IDENTIFICATION
BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE
IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP
SCREWS ARE SAE GRADE 5 OR LOWER. BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH
QUALITIES EQUIVALENT TO PROPERTY CLASS 10.9 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY
THE DESCRIPTION HS 10.9. ALL STANDARD BOLTS AND CAP SCREWS ARE PROPERTY CLASS.
8.8 OR LOWER.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

John Deere GREENSTAR YIELD MAPPING AND MONITORING SYSTEM parts catalog Manual – PDF DOWNLOAD

GRIDS…………………………………………………………………………… 1
A…………………………………………………………………………… 1
A02……………………………………………………………………. 1
A03……………………………………………………………………. 2
A04……………………………………………………………………. 3
A05……………………………………………………………………. 4
A06……………………………………………………………………. 5
A07……………………………………………………………………. 6
A11……………………………………………………………………. 8
A12……………………………………………………………………. 9
A13…………………………………………………………………….10
A14…………………………………………………………………….11
A15…………………………………………………………………….12
A16…………………………………………………………………….13
A17…………………………………………………………………….14
A18…………………………………………………………………….15
A19…………………………………………………………………….16
A20…………………………………………………………………….17
A21…………………………………………………………………….18
A22…………………………………………………………………….19
A23…………………………………………………………………….20
A24…………………………………………………………………….21
B……………………………………………………………………………22
B01…………………………………………………………………….22
B02…………………………………………………………………….23
B03…………………………………………………………………….24
B04…………………………………………………………………….25
B05…………………………………………………………………….26
B06…………………………………………………………………….27
B07…………………………………………………………………….28
B08…………………………………………………………………….29
B09…………………………………………………………………….30
B10…………………………………………………………………….31
B11…………………………………………………………………….32
B12…………………………………………………………………….33
B13…………………………………………………………………….34
B14…………………………………………………………………….35
B15…………………………………………………………………….36
B16…………………………………………………………………….37
B17…………………………………………………………………….38
B18…………………………………………………………………….39
B19…………………………………………………………………….40
B20…………………………………………………………………….41
B21…………………………………………………………………….42
B22…………………………………………………………………….43
B23…………………………………………………………………….44
B24…………………………………………………………………….46
B25…………………………………………………………………….47
C……………………………………………………………………………48
C01…………………………………………………………………….48
L……………………………………………………………………………49
L24…………………………………………………………………….49
L25…………………………………………………………………….50
ALPHABETICAL INDEX……………………………………………………………….. 5
A …………………………………………………………………… 5
ADAPTER, CAB WIRING HARNESS, MAPPING 9410, 9510, 9610, CTS II (680000- ) ….26
B …………………………………………………………………… 5
BRACKET, CLEAN GRAIN ELEVATOR ADJUSTING YIELD MAPPING ….18
BRACKET, DISPLAY YIELD MAPPING (680001- ) ….10
BRACKET, MASS FLOW SENSOR YIELD MAPPING ….14
BRACKET, MOISTURE SENSOR YIELD MAPPING ….16
BRACKET, POSITION RECEIVER YIELD MAPPING …. 8
BRACKET, PROCESSOR ( -680000) YIELD MAPPING ….12
BRACKET, TRANSDUCER MOUNTING YIELD MAPPING ….14
C …………………………………………………………………… 5
CAB WIRING HARNESS – YIELD MAPPING 9400, 9500, 9600, CTS ….22
CAB WIRING HARNESS – YIELD MAPPING 9410, 9510, 9610, CTS II ( -680000) ….24
CAB WIRING HARNESS – YIELD MAPPING 9410, 9510, 9610, CTS II (680000- ) ….28
CAB WIRING HARNESS ADAPTER – MAPPING 9410, 9510, 9610, CTS II (680000- ) ….26
CAB WIRING HARNESS, FIELD INSTALLED W/MOBILE PROCESSOR & DISPLAY (680000-) ….28
CABLE, DATASTORE/COMPUTER ….44
CHAIN ADJUSTING PARTS, CLEAN GRAIN ELEVATOR – YIELD MAPPING ….18
CHASSIS WIRING HARNESS YIELD MAPPING ….20
CLEAN GRAIN ELEVATOR ADJUSTING BRACKET YIELD MAPPING ….18
CLEAN GRAIN ELEVATOR BEARING COVER YIELD MAPPING ….18
CLEAN GRAIN ELEVATOR CHAIN ADJUSTING PARTS – YIELD MAPPING ….18
CONVERSION, CAB WIRING HARNESS, MAPPING 9410, 9510, 9610, CTS II (680000- ) ….26
COVER, CLEAN GRAIN ELEVATOR BEARING YIELD MAPPING ….18
COVER, MOISTURE SENSOR YIELD MAPPING ….16
COVER, POSITION RECEIVER YIELD MAPPING …. 8
COVER, PROCESSOR ( -680000) YIELD MAPPING ….12
COVERS, MASS-FLOW SENSOR – YIELD MAPPING WHEN MASS-FLOW SENSOR IS NOT USED ….36
COVERS, MOISTURE SENSOR ( -675000) YIELD MAPPING ….38
COVERS, MOISTURE SENSOR (675001- ) YIELD MAPPING ….40
COVERS, WHEN MOISTURE SENSOR IS NOT USED ( -675000) YIELD MAPPPING ….38
COVERS, WHEN MOISTURE SENSOR IS NOT USED (675001- ) YIELD MAPPING ….40
D …………………………………………………………………… 5
DATASTORE ….44
DATASTORE MODULE ….42
DATASTORE MODULE ….44
DATASTORE W/DISPLAY ….42
DECALS YIELD MAPPING ….46
DECALS YIELD MONITOR ….48
DECALS, DISPLAY YIELD MAPPING ….46
DECALS, DISPLAY YIELD MONITOR ….48
DECALS, MOISTURE SENSOR YIELD MAPPING ….46
DECALS, MOISTURE SENSOR YIELD MONITOR ….48
DECALS, PROCESSOR YIELD MAPPING ….46
DEFLECTOR DOOR, MASS FLOW SENSOR YIELD MAPPING ….14
DISPLAY YIELD MAPPING (680001- ) ….10
DISPLAY BRACKET YIELD MAPPING (680001- ) ….10
DISPLAY DECALS YIELD MONITOR ….48
DISPLAY W/DATASTORE ….42
DOOR, MASS FLOW SENSOR DEFLECTOR YIELD MAPPING ….14
E …………………………………………………………………… 5
ELEVATOR CHAIN ADJUSTING PARTS, CLEAN GRAIN – YIELD MAPPING ….18
EXTENSION HARNESS, MOISTURE SENSOR YIELD MAPPING-9140, 9510, 9610, CTS II ….30
F …………………………………………………………………… 5
FIELD INSTALLED CAB WIRING HARNESS W/MOBILE PROCESSOR & DISPLAY (680000-) ….28
FLOW SENSOR, MASS YIELD MAPPING ….14
H …………………………………………………………………… 5
HARNESS, CAB WIRING – YIELD MAPPING 9400, 9500, 9600, CTS ….22
HARNESS, CAB WIRING – YIELD MAPPING 9410, 9510, 9610, CTS II ( -680000) ….24
HARNESS, CAB WIRING – YIELD MAPPING 9410, 9510, 9610, CTS II (680000- ) ….28
HARNESS, CAB WIRING ADAPTER – MAPPING 9410, 9510, 9610, CTS II (680000- ) ….26
HARNESS, CHASSIS WIRING YIELD MAPPING ….20
HARNESS, DATASTORE ….42
HARNESS, FIELD INSTALLED CAB WIRING W/MOBILE PROCESSOR & DISPLAY (680000-) ….28
HARNESS, MOISTURE SENSOR EXTENSION YIELD MAPPING-9410, 9510, 9610, CTS II ….30
HARNESS, MOISTURE SENSOR MOTOR YIELD MAPPING ….16
M …………………………………………………………………… 5
MAPPING PROCESSOR YIELD MAPPING (680001- ) ….10
MAPPING PROCESSOR ( -680000) YIELD MAPPING ….12
MASS FLOW SENSOR YIELD MAPPING ….14
MASS FLOW SENSOR BRACKET YIELD MAPPING ….14
MASS FLOW SENSOR DOOR YIELD MAPPING ….14
MASS FLOW SENSOR TEMPLATES YIELD MAPPING ….34
MASS-FLOW SENSOR COVERS – YIELD MAPPING WHEN MASS-FLOW SENSOR IS NOT USED ….36
MOBILE PROCESSOR YIELD MAPPING (680001- ) ….10
MODULE, DATASTORE ….42
MODULE, DATASTORE ….44
MOISTURE METER TEMPLATE YIELD MAPPING ….34
MOISTURE SENSOR YIELD MAPPING ….16
MOISTURE SENSOR BRACKET YIELD MAPPING ….16
MOISTURE SENSOR COVER YIELD MAPPING ….16
MOISTURE SENSOR COVERS ( -675000) YIELD MAPPING ….38
MOISTURE SENSOR COVERS (675001- ) YIELD MAPPING ….40
MOISTURE SENSOR COVERS – YIELD MAPPING ( -675000) W/O MOISTURE SENSOR ….38
MOISTURE SENSOR COVERS – YIELD MAPPING (675001- ) W/O MOISTURE SENSOR ….40
MOISTURE SENSOR DECALS YIELD MONITOR ….48
MOISTURE SENSOR EXTENSION HARNESS YIELD MAPPING-9410, 9510, 9610, CTS II ….30
MOISTURE SENSOR MOTOR YIELD MAPPING ….16
MOISTURE SENSOR MOTOR HARNESS YIELD MAPPING ….16
MOISTURE SENSOR TEMPLATES YIELD MAPPING ….34
MOTOR, MOISTURE SENSOR YIELD MAPPING ….16
P …………………………………………………………………… 5
PADDLE, MOISTURE SENSOR YIELD MAPPING ….16
POSITION RECEIVER YIELD MAPPING …. 8
POSITION RECEIVER BRACKET YIELD MAPPING …. 8
POSITION RECEIVER COVER YIELD MAPPING …. 8
PROCESSOR BRACKET ( -680000) YIELD MAPPING ….12
PROCESSOR COVER ( -680000) YIELD MAPPING ….12
PROCESSOR COVER SPRING ( -680000) YIELD MAPPING ….12
PROCESSOR, MAPPING YIELD MAPPING (680001- ) ….10
PROCESSOR, MAPPING ( -680000) YIELD MAPPING ….12
PROCESSOR, MOBILE YIELD MAPPING (680001- ) ….10
R …………………………………………………………………… 5
RECEIVER, POSITION YIELD MAPPING …. 8
S …………………………………………………………………… 5
SENSOR, MASS FLOW YIELD MAPPING ….14
SENSOR, MOISTURE YIELD MAPPING ….16
SPRING, PROCESSOR COVER ( -680000) YIELD MAPPING ….12
T …………………………………………………………………… 5
TEMPLATES YIELD MAPPING ….34
TEMPLATES, MASS FLOW SENSOR YIELD MAPPING ….34
TEMPLATES, MOISTURE SENSOR YIELD MAPPING ….34
TRANSDUCER YIELD MAPPING ….14
TRANSDUCER MOUNTING BRACKET YIELD MAPPING ….14
TRANSFORMER, DATASTORE ….44
W …………………………………………………………………… 5
WIRING HARNESS, CAB – YIELD MAPPING 9400, 9500, 9600, CTS ….22
WIRING HARNESS, CAB – YIELD MAPPING 9410, 9510, 9610, CTS II ( -680000) ….24
WIRING HARNESS, CAB – YIELD MAPPING 9410, 9510, 9610, CTS II (680000- ) ….28
WIRING HARNESS, CAB ADAPTER – MAPPING 9410, 9510, 9610, CTS II (680000- ) ….26
WIRING HARNESS, CHASSIS YIELD MAPPING ….20

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V