Kobelco SK140SRLC-5 and SK140SRL-5 Operation Manual PDF – Complete Operator’s Guide

Description

Kobelco SK140SRLC-5 and SK140SRL-5 Operation Manual PDF

This Kobelco SK140SRLC-5 and SK140SRL-5 Operation Manual PDF is the complete operator guide for both excavator models, published under document number S2YH00011ZE10. It brings together the safety instructions, machine familiarization, operating procedures, inspection and maintenance routines, transportation guidance, specifications, optional equipment instructions and special procedures needed to run and care for these machines. The manual is written in English and presents the material in the same chapter structure used by the manufacturer, so you can move from a safety label location straight to the relevant operating or maintenance section without guesswork.

File Details

• Manual type: Operation Manual
• Brand/model: Kobelco SK140SRLC-5 and SK140SRL-5
• Language: English
• Page count: 416
• File format: PDF
• Document number: S2YH00011ZE10

Chapters Covered

• 1. SAFETY INSTRUCTIONS
• 2. MACHINE FAMILIARIZATION
• 3. MACHINE OPERATION
• 4. INSPECTION AND MAINTENANCE
• 5. TRANSPORTATION
• 6. SPECIFICATION
• 7. MACHINE OPERATION MANAGEMENT SYSTEM
• 8. OPTIONAL EQUIPMENT
• 9. SPECIAL PROCEDURES

Safety Instructions

The opening chapter covers the safety labels and decals used on the machine, including their locations and the meaning of the signal words. It then moves through pre-start safety rules, protective equipment, abnormal and emergency conditions, fire prevention, getting on and off the machine, pre-start inspection, visibility, starting and traveling precautions, prohibited operations, parking checks, end-of-shift procedures, inspection and maintenance precautions, battery handling, accumulator and gas spring handling, and towing. This is the section to read before operating either the SK140SRLC-5 or SK140SRL-5, and it is also the reference for understanding the safety decals shown throughout the manual.

Machine Familiarization

This chapter identifies the basic components of the machine and the operator station nomenclature, then explains the gauge cluster and multi-display. It covers the engine coolant temperature meter, fuel level meter, DEF/AdBlue level gauge, hour meter, screen change switch, buzzer stop switch, work mode select switch, washer and wiper switches, travel speed select switch, auto acceleration switch, attachment mode select switch, menu switch, user menu settings, maintenance display, warning display screen and hydraulic oil filter clogging detector. It also documents the starter switch, engine throttle, working lights, manual regeneration switch, pressure release switch, overload alarm select switch, cab rotating light switch, quick hitch operation switch, horn switch, redundant-mode engine throttle, swing parking brake release switch, KPSS release switch, engine stop switch, 12 V power supply, USB port and external input terminal. The levers and pedals section explains the pilot control shut-off lever, operator control levers and travel lever and pedal. Further sections cover the fuse and relay box, fusible link, controller, dual monitor, radio, air conditioner, seat belt, operator’s seat adjustment, cab parts, emergency escape from the operator’s station, tool box, grease gun holder, cup holder, guard and side door, battery power-off switch and fuel supply pump.

Machine Operation

The operation chapter begins with everyday checks and the checks before starting the engine: coolant level, engine oil level, fuel level, draining the fuel pre-filter, hydraulic oil tank level, fan and air conditioning compressor belts, radiator and oil cooler, DEF/AdBlue level, operator’s seat adjustment, mirror adjustment, multi-display check, working light check and air cleaner inlet check. It then explains starting the engine under normal temperature conditions, cold-condition starting, use of jumper cables, stopping the engine, checks after starting, engine warming-up, hydraulic oil warming-up, the auto idling stop function and restart after auto idle stop. Work mode selection and attachment mode switching are covered before the main machine operation section, which includes travel procedures, changing travel speed, operation in water or on soft ground, getting out of soft ground, swing and attachment operations, digging work and loading work. Parking procedures, parking on a slope, inspection and check after operation, operation in cold conditions, at the seashore and in sandy or dusty areas, plus precautions for long-term storage, complete the chapter.

Inspection and Maintenance

This is the largest technical chapter in the Kobelco SK140SRLC-5 and SK140SRL-5 Operation Manual PDF. It opens with general inspection and maintenance guidance, precautions, and the exhaust gas cleaning device, including automatic regeneration, manual regeneration, inspection and maintenance, and precautions for use. The SCR system and DEF/AdBlue section explains SCR operation, DEF/AdBlue circuit and battery, storage, purchasing, low-level warnings, quality problems, draining and emergency evacuation mode. Lubricant, fuel and coolant specifications are followed by bio-oil guidance, maintenance parts, tightening torques for specific positions, general bolt and nut torques, and joint and hydraulic hose torques. The inspection and maintenance chart is followed by maintenance when required: wiper blades, washer fluid, bucket replacement, tooth point and side cutter replacement, bucket gap adjustment, bleeding air from fuel piping, and releasing internal pressure in the hydraulic system. Scheduled procedures are then laid out at 8-hour, 50-hour, 120-hour, 250-hour, 500-hour, 1000-hour, 2000-hour and 5000-hour intervals, covering greasing, battery inspection, fuel tank draining, crawler tension, swing and travel reduction unit oil checks, fan belt adjustment, radiator hoses, air conditioner filters, air cleaner elements, radiator cap, SCR inspection, radiator and oil cooler cleaning, engine oil and filter changes, fuel pre-filter and filter changes, swing bearing greasing, control lever push rod lubrication, air conditioner refrigerant, electromagnetic fuel pump, return filter, air breather element, engine mounting bracket, battery voltage, coolant replacement, suction strainer cleaning, pilot line filter cleaning and hydraulic oil replacement.

Transportation

The transportation chapter covers the regulations to observe, loading and unloading the machine, fixing the machine on a trailer, unloading, machine lifting and the position of the lifted machine, and installing and removing the mirror. It includes the dimensions and operating masses shown for both models, which is useful when planning transport and selecting the correct trailer or lifting arrangement.

Specification

General specifications are given for the SK140SRLC-5 and SK140SRL-5, including operating mass, bucket capacity, engine name, rated power, overall dimensions, track shoe width, cab height, minimum ground clearance, tail swing radius, crawler length, tumbler center distance, clearance under the upper structure, ground contact pressure, swing speed, travel speed and gradeability. The chapter also covers shoe types and uses, working ranges for the backhoe attachment, attachment type and combination, front attachment variation, and lifting capacity tables for the 4.68 m boom configurations.

Machine Operation Management System

This short chapter describes the Machine Operation Management System, the remote download system and the built-in wireless equipment declarations. It is the place to check when the machine’s communication or software update features are involved.

Optional Equipment

The optional equipment chapter covers operation of the hydraulic breaker and nibbler (crusher), including selection, precautions for impurity and hydraulic oil, breaker use, nibbler use, and periodic inspection and maintenance. It also explains selection of the attachment mode and selector valve, switching the stop valve, flow rate adjustment, control of the proportional hand control for extra, nibbler and breaker, periodic inspection and maintenance of the nibbler and breaker, reinforcement of the attachment, precautions from breaker manufacturers, accumulator installation criteria, relief valve installation, object handling, rated lift capacity chart, quick hitch use and travel alarm switch.

Special Procedures

The final chapter provides special procedures at engine failure, lowering the attachment to the ground, releasing travel motor brakes and releasing swing brakes. These are the procedures an experienced operator or technician needs when the machine cannot be operated normally and the attachment or brakes must be handled safely.

Why This Operation Manual Matters

Having the Kobelco SK140SRLC-5 and SK140SRL-5 Operation Manual PDF on hand means you can check the correct procedure before starting a shift, before changing an attachment, before transporting the machine or before opening a maintenance point. The manual ties the safety labels to the actual systems, shows the controls and gauges as they are laid out in the cab, and gives the inspection intervals and technical values that keep the excavator working within its intended limits. For owners and operators who need to look up a torque, a capacity, a warning display or a special procedure, this PDF is a practical reference that stays usable on a laptop, tablet or phone.

IMAGES PREVIEW

Instant PDF Delivery

This Kobelco SK140SRLC-5 and SK140SRL-5 Operation Manual is delivered as an instant PDF download after payment, with no shipping and no waiting for a physical book. You can open it on any device that reads PDF files, print the pages you need for the workshop or cab, and keep the complete manual available for future reference. Whether you are running the machine, planning maintenance or preparing for transport, the complete PDF gives you the full chapter set in one file.