Kobelco SK200-8 SK210LC-8 Hydraulic Excavator Parts Manual – HS Engine PDF

Description

Kobelco SK200-8 and SK210LC-8 HS Engine Hydraulic Excavator Parts Manual

This complete illustrated parts manual covers the Kobelco SK200-8 and SK210LC-8 hydraulic excavators built with the HS Engine — the HINO J05ETG diesel. Every major assembly on the machine is catalogued with exploded diagrams and full part number listings: the attachment group at the front, the upper structure frame and counterweight at the rear, the operator cab and instrument panel, the electrical system, the undercarriage, and the complete engine assembly.

Machine serial applicability runs from SK200-8 YN11-45001- and SK210LC-8 YQ11-06001-. The manual is bilingual, printed in English and Japanese with the original part names for every numbered item, so it works whether you read the English column or cross-reference the Japanese text with your local dealer.

This is the parts identification reference for the excavator, not a repair guide. It tells you what each component is, what its genuine part number is, and how many of each you need per machine. That makes it the book you keep open on the bench when you are ordering a replacement cylinder seal kit, tracking down a hose assembly behind the control valve, matching a bucket pin for a 0.8 m³ or 0.93 m³ attachment, or confirming which harness branch feeds the boom cylinder light. Every figure is indexed by item number, and the parts index at the back gives a direct route from part name to figure.

File Details

• Manual type: Illustrated Parts Manual / Parts Catalog
• Brand: Kobelco
• Models: SK200-8 and SK210LC-8 (HS Engine)
• Applicable machine numbers: SK200-8 YN11-45001-, SK210LC-8 YQ11-06001-
• Engine: HINO J05ETG / J05ETG-KSDF diesel
• Language: English and Japanese (bilingual)
• File format: PDF

Chapters Covered

• General Maintenance Items — filter list, nut and sleeve part numbers, paint colors
• Upperstructure — upper frame assembly, counterweight installation, engine installation, radiator group and radiator assembly, air cleaner, muffler, fuel lines, fuel filter, fuel tank, hydraulic tank, power take-off assembly, swing motor installation, control valve installation, hydraulic pump suction and delivery lines, upper main hydraulic lines, swivel hydraulic lines, return hydraulic lines
• Operator Station and Controls — control box assembly, grip assembly, radio installation, arm rest, propel lever assembly, remote control lines, main control lines, valve control lines, pump control lines, propel control lines, floor plate, mirrors
• Cab and Windows — cab installation, cab assembly, roof window, front window, cab door, seat, seat belt
• Guards, Covers and Instrumentation — guard installations, under covers, instrument panel, cluster gauge, controller installation, relay box, battery, air conditioner units, air drier, compressor, upper electrics, lights, lamps, harness assemblies (upper, cab, engine, boom cylinder light, floor plate)
• Undercarriage — lower group (standard and long crawler), slewing ring, crawler idlers, idler adjust, track rollers, upper rollers, track shoes (standard, long crawler, reinforced), lower hydraulic lines
• Attachments — boom group 5.65 m, boom assembly 5.65 m, boom hydraulic lines, boom light, arm group 2.94 m, arm assembly 2.94 m, HD arm variant, arm hydraulic lines 2.94 m, bucket installation, standard 0.8 m³ bucket, short arm group 2.4 m
• Tools and Spare Parts — tool and accessory, element kit
• Nibbler and Breaker — valve installation, upper hydraulic lines, controls and operators, valve control lines, remote control lines, instrument panel, boom hydraulic lines, arm group and hydraulic lines, connector assembly, name plate installation
• Optional Parts — mirror installation, cab light installation, bucket assemblies 0.8 m³ and 0.93 m³ (side type pin), short arm group 2.4 m and hydraulic lines, cap assembly
• Name Plates — machine name plate, cab name plate, CEMA mark plate, lubrication chart, attachment name plate
• Parts Index and Index
• Hydraulic Components section
• Engine Components — full HINO J05ETG parts catalog

Altogether the manual runs to over five hundred pages of exploded views and parts lists, organised by machine group so you can move from the general drawing at the front straight to the figure you need. Each numbered item on a diagram appears in the corresponding parts table with its part number, English name, Japanese name, quantity per machine, and any applicable serial restrictions or interchangeability notes. The index at the back lets you jump from a part name to the exact figure, which saves a lot of page-flipping when you already know what you are looking for but not where it lives.

What the Manual Covers in Practice

The Hydraulic Components section is referenced throughout the main listings and points you to the dedicated hydraulic parts book for pump, control valve, swing motor, and cylinder internal details. The engine section is a complete HINO J05ETG parts catalog in its own right — starter, alternator, thermostat, oil and fuel filter elements, sensors, O-rings, and the full engine installation hardware group with brackets, mounts, and clips. For a machine that is still in daily service, having the correct part numbers for the engine dress items and the mounting hardware is often the difference between a same-day fix and a week-long wait while a wrong part is returned.

IMAGES PREVIEW

The attachments section covers both the 5.65 m boom with the 2.94 m arm and the short 2.4 m arm option, plus the 0.8 m³ and 0.93 m³ bucket assemblies. Boom and arm hydraulic line figures are separated from the structural groups so you can identify a hose or tube without searching through the fabrication drawings. The undercarriage section splits standard, long crawler, and reinforced shoe configurations, which matters when the same model number was delivered with different track options depending on the market.

Who This Parts Manual Is For

This Kobelco SK200-8 SK210LC-8 parts manual is written for the people who actually order parts for these machines: shop foremen, parts counter staff, independent mechanics, and owners who do their own maintenance. The bilingual English and Japanese part names mean it also works as a cross-reference when ordering through a Japanese-speaking dealer or a supplier who uses the original terminology. Because the manual covers both the SK200-8 and the SK210LC-8 with their respective serial ranges, one copy serves a mixed fleet without needing two separate books.

If you run a Kobelco SK200-8 or SK210LC-8 with the HS Engine, this parts manual gives you the full picture of what is on the machine and what it takes to replace it. The instant PDF download means you can have it open on a laptop, tablet, or phone in the workshop, search it, and print the figures you need for the job at hand. No shipping, no waiting for a paper copy to arrive, and no risk of a torn or missing page in a second-hand book — just the complete factory parts reference, ready when you are.