Komatsu Hydraulic Excavator PC600-8EO PC600LC-8EO PC650-8EO PC650LC-8EO PC700LC-8EO Operation Manual SN 65001 and up – PDF DOWNLOAD

Description

Komatsu Hydraulic Excavator PC600-8EO PC600LC-8EO PC650-8EO PC650LC-8EO PC700LC-8EO Operation Manual

DESCRIPTION:

Komatsu Hydraulic Excavator PC600-8EO PC600LC-8EO PC650-8EO PC650LC-8EO PC700LC-8EO Operation Manual

BEFORE READING THIS MANUAL:

This manual gives details of the operation and methods of inspection and maintenance for this machine that must be obeyed in order to use the machine safely. Most accidents are caused by the failure to follow fundamental safety rules for the operation and maintenance of machines. Read, understand and follow all precautions and warnings in this manual and on the machine before performing operation and maintenance. Failure to do so may result in serious injury or death.

•  Komatsu cannot predict every circumstance that might involve a potential hazard when the machine is used. Therefore, the safety messages in this manual and on the machine may not include all possible safety precautions. If you carry out any operation, inspection, or maintenance under conditions that are not described in this manual, understand that it is your responsibility to take the necessary precautions to ensure safety. In no event should you or others engage in the prohibited uses or actions described in this manual.
• Improper operation and maintenance of the machine can be hazardous and could result in serious injury or death. If you sell the machine, be sure to give this manual to the new owner together with the machine. Always keep this Operation and Maintenance Manual in the location shown on the right so that all relevant personnel can read it at any time. Storage location for the Operation and Maintenance Manual: Pocket (1) at rear of operator’s seat If this manual is lost or damaged, contact your distributor immediately to arrange for its replacement.
• For details regarding the machine serial No. you will need to provide your Komatsu distributor, see “TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR (PAGE 1-7)”. This manual uses the international units (SI) for units of measurement. For reference, units that have been used in the past are given in ( ). The explanations, values, and illustrations in this manual have been prepared based on the latest information available as of the date of its publication.
• Continuing improvements in the design of this machine may lead to additional changes that are not reflected in this manual. Consult Komatsu or your Komatsu distributor for the latest available information concerning your machine or with questions regarding information contained in this manual.
• The numbers in circles in the illustrations correspond to the numbers in ( ) in the text. (For example:1 → (1)) Komatsu delivers machines that comply with all applicable regulations and standards of the country to which it has been shipped. If this machine has been purchased in another country, it may lack certain safety devices and specifications that are necessary for use in your country. If there is any question about whether your product complies with the applicable standards and regulations of your country, consult Komatsu or your Komatsu distributor before operating the machine.

KOMATSU HYDRAULIC EXCAVATOR PC600-8EO PC600LC-8EO PC650-8EO PC650LC-8EO PC700LC-8EO OPERATION MANUAL SN 65001 AND UP – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Komatsu Hydraulic Excavator PC600-8EO PC600LC-8EO PC650-8EO PC650LC-8EO PC700LC-8EO Operation Manual

FOREWORD 1- 1
BEFORE READING THIS MANUAL 1- 2
SAFETY INFORMATION 1- 3
INTRODUCTION 1- 4
USE OF MACHINE 1- 4
DIRECTIONS OF MACHINE 1- 4
VISIBILITY FROM OPERATOR’S SEAT 1- 5
PRODUCT INFORMATION 1- 7
PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE 1- 7
EPA REGULATIONS, ENGINE NUMBER PLATE 1- 7
SERVICE METER LOCATION 1- 8
YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR 1- 8
SAFETY 2- 1
SAFETY 2- 2
SAFETY LABELS 2- 5
LOCATION OF SAFETY LABELS 2- 6
SAFETY LABELS 2- 7
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE 2- 13
PRECAUTIONS BEFORE STARTING OPERATION 2- 13
PREPARATIONS FOR SAFE OPERATION 2- 13
FIRE PREVENTION 2- 15
PRECAUTIONS WHEN GETTING ON OR OFF MACHINE 2- 16
DO NOT GET CAUGHT IN WORK EQUIPMENT 2- 18
PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES 2- 18
PROTECTION AGAINST FALLING, FLYING, INTRUDING OBJECTS 2- 19
UNAUTHORIZED MODIFICATION 2- 19
PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS 2- 20
PRECAUTIONS RELATED TO CAB GLASS 2- 20
PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING 2- 20
PRECAUTIONS FOR OPERATION 2- 21
PRECAUTIONS FOR JOBSITE 2- 21
STARTING ENGINE 2- 23
OPERATION 2- 25
TRANSPORTATION 2- 32
TOWING 2- 33
LIFTING OBJECTS WITH BUCKET 2- 34
PRECAUTIONS FOR MAINTENANCE 2- 35
PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE 2- 35
PRECAUTIONS FOR INSPECTION AND MAINTENANCE 2- 39
OPERATION 3- 1
MACHINE VIEW ILLUSTRATIONS 3- 2
OVERALL MACHINE VIEW 3- 2
CONTROLS AND GAUGES 3- 3
DETAILED CONTROLS AND GAUGES 3- 5
MONITORING SYSTEM 3- 5
SWITCHES 3- 73
CONTROL LEVERS AND PEDALS 3- 80
SUN ROOF 3- 83
WINDSHIELD 3- 84
CONTENTS FOREWORD
EMERGENCY ESCAPE HAMMER 3- 90
DOOR LOCK 3- 90
CAP WITH LOCK 3- 91
HOT AND COOL BOX 3- 93
MAGAZINE BOX 3- 93
ASHTRAY 3- 93
AIR CONDITIONER CONTROLS 3- 94
RADIO 3-107
AUXILIARY ELECTRIC POWER 3-111
FUSE 3-112
CIRCUIT BREAKER 3-113
CONTROLLER 3-114
TOOL BOX 3-114
GREASE PUMP 3-115
FIRE EXTINGUISHER 3-118
MACHINE OPERATIONS AND CONTROLS 3-119
BEFORE STARTING ENGINE 3-119
STARTING ENGINE 3-139
AFTER STARTING ENGINE 3-142
STOPPING THE ENGINE 3-152
MACHINE OPERATION 3-153
STEERING THE MACHINE 3-157
SWINGING 3-159
WORK EQUIPMENT CONTROLS AND OPERATIONS 3-160
WORKING MODE 3-162
PROHIBITED OPERATIONS 3-165
GENERAL OPERATION INFORMATION 3-170
TRAVELING ON SLOPES 3-172
ESCAPE FROM MUD 3-174
RECOMMENDED APPLICATIONS 3-175
BUCKET REPLACEMENT 3-176
PARKING MACHINE 3-178
MACHINE INSPECTION AFTER DAILY WORK 3-179
LOCKING 3-180
TRANSPORTATION 3-181
TRANSPORTATION PROCEDURE 3-181
LIFTING MACHINE 3-181
SHIPPING MACHINE INFORMATION 3-182
TRANSPORTATION POSTURE 3-183
PROCEDURE FOR INCREASING OR REDUCING TRACK FRAME GAUGE 3-189
COLD WEATHER OPERATION 3-191
COLD WEATHER OPERATION INFORMATION 3-191
AFTER DAILY WORK COMPLETION 3-193
AFTER COLD WEATHER SEASON 3-193
LONG TERM STORAGE 3-194
BEFORE STORAGE 3-194
DURING STORAGE 3-194
AFTER STORAGE 3-195
STARTING MACHINE AFTER LONG-TERM STORAGE 3-195
TROUBLES AND ACTIONS 3-196
FOREWORD CONTENTS
RUNNING OUT OF FUEL 3-196
PHENOMENA THAT ARE NOT FAILURES 3-197
TOWING THE MACHINE 3-198
SEVERE JOB CONDITION 3-199
DISCHARGED BATTERY 3-199
OTHER TROUBLE 3-203
MAINTENANCE 4- 1
MAINTENANCE INFORMATION 4- 2
OUTLINE OF SERVICE 4- 4
HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC 4- 4
ELECTRIC SYSTEM MAINTENANCE 4- 7
WEAR PARTS 4- 8
WEAR PARTS LIST 4- 8
RECOMMENDED FUEL, COOLANT, AND LUBRICANT 4- 9
RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR
PRODUCTS OTHER THAN KOMATSU GENUINE OIL 4- 11
TIGHTENING TORQUE SPECIFICATIONS 4- 12
TIGHTENING TORQUE LIST 4- 12
SAFETY CRITICAL PARTS 4- 13
SAFETY CRITICAL PARTS LIST 4- 14
MAINTENANCE SCHEDULE 4- 15
MAINTENANCE SCHEDULE CHART 4- 15
MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER 4- 17
MAINTENANCE PROCEDURE 4- 18
INITIAL 100 HOURS MAINTENANCE (ONLY AFTER THE FIRST 100 HOURS) 4- 18
INITIAL 500 HOURS MAINTENANCE (ONLY AFTER THE FIRST 500 HOURS) 4- 18
WHEN REQUIRED 4- 19
CHECK BEFORE STARTING 4- 43
EVERY 10 HOURS MAINTENANCE 4- 44
EVERY 100 HOURS MAINTENANCE 4- 47
EVERY 250 HOURS MAINTENANCE 4- 48
EVERY 500 HOURS MAINTENANCE 4- 54
EVERY 1000 HOURS MAINTENANCE 4- 65
EVERY 2000 HOURS MAINTENANCE 4- 76
EVERY 4000 HOURS MAINTENANCE 4- 83
EVERY 5000 HOURS MAINTENANCE 4- 86
EVERY 8000 HOURS MAINTENANCE 4- 87
SPECIFICATIONS 5- 1
SPECIFICATIONS 5- 2
ATTACHMENTS AND OPTIONS 6- 1
GENERAL PRECAUTIONS FOR SAFETY 6- 2
PRECAUTIONS WHEN SELECTING 6- 2
READ THE INSTRUCTION MANUAL THOROUGHLY 6- 2
PRECAUTIONS WHEN REMOVING OR INSTALLING 6- 2
PRECAUTIONS WHEN USING 6- 2
ATTACHMENT GUIDE 6- 3
COMBINATIONS OF WORK EQUIPMENT 6- 4
TRACK SHOES SELECTION 6- 7
HANDLING COUNTERWEIGHT REMOVER 6- 8
HANDLING MACHINES EQUIPPED WITH KOMTRAX 6- 17
CONTENTS FOREWORD
BASIC PRECAUTIONS 6- 17
LOADING SHOVEL 7- 1
EXPLANATION OF COMPONENTS 7- 2
SWITCHES 7- 2
FUSE 7- 5
OPERATIONS 7- 6
OPERATION OF WORK EQUIPMENT 7- 6
PRECAUTIONS DURING OPERATION 7- 8
PRECAUTIONS FOR OPERATION 7- 11
LOADING SHOVEL WORK 7- 13
TRANSPORTATION 7- 14
MACHINE CONFIGURATION FOR TRANSPORT 7- 14
WEAR PARTS 7- 15
WEAR PARTS LIST 7- 15
MAINTENANCE 7- 16
CHECK BEFORE STARTING 7- 16
EVERY 10 HOURS MAINTENANCE 7- 18
EVERY 5000 HOURS MAINTENANCE 7- 19
SPECIFICATION 7- 20
COMBINATION OF WORK EQUIPMENT 7- 21
COMBINATION OF WORK EQUIPMENT 7- 21
INDEX 8- 1

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]