Komatsu PC210-10M0 & PC210LC-10M0 Hydraulic Excavator Parts Book PDF – Serial B10001 and Up

Description

Komatsu PC210-10M0 and PC210LC-10M0 Parts Book – Illustrated Parts Catalog for Serial B10001 and Up

This is the full Komatsu Parts Book for the PC210-10M0 and PC210LC-10M0 hydraulic excavators, covering machine serial numbers B10001 and up and the SAA6D107E-1 engine from serial 36662610 and up. Every illustrated figure is paired with a parts list page that gives the index number, part number, description, quantity and applicable serial number, so you can move from a callout on an exploded diagram straight to the exact part you need to order.

File Details

• Manual type: Parts Book / Illustrated Parts Catalog
• Brand: Komatsu
• Machine models: PC210-10M0, PC210LC-10M0
• Machine serial number range: B10001 and up
• Engine model: SAA6D107E-1
• Engine serial number range: 36662610 and up
• Document number: KEPB210000
• Languages: English, with introductory sections also presented in French, Italian, German, Portuguese, Chinese, Russian, and Arabic
• Page count: 440
• File format: PDF

The catalog opens with a multilingual foreword that explains the code column (A1, A2, A3, A4, B1, B2, C1, C2, C3) used throughout the parts lists – so you always know whether a listed number is interchangeable with the line above it, is a discontinued item being replaced by another part, or can only be supplied as a complete assembly. That single reference page alone saves hours of guessing at the counter.

Chapters Covered

• Engine
• Engine Related Parts
• Cooling System
• Fuel Tank and Related Parts
• Electrical System
• Hydraulic System
• Main Frame and Related Parts
• Operator’s Compartment and Control System
• Guard and Related Parts
• Swing Circle and Related Parts
• Travel and Lower Piping
• Under Carriage
• Work Equipment
• Marks and Plates
• Other Equipment
• Service Kit and Component Parts
• Numerical Index

Engine and Engine Related Parts

The engine portion of the manual breaks down the SAA6D107E-1 into every serviceable assembly: cylinder head, cylinder head cover, valve and rocker arm assemblies, camshaft, cylinder block and related parts, crankshaft, pistons and connecting rods, vibration damper, flywheel and flywheel housing, rear gear housing, front gear cover, oil pan, oil level gauge, oil pump, oil cooler and oil filter, and the full fuel system from supply pump through fuel injectors to the filter head and cartridge. Engine related parts cover the radiator, air cleaner, cooling fan drive, fan belt and tensioner, water pump, thermostat, alternator and starting motor mountings, wiring harness, and the engine controller itself. Part numbers for the turbocharger, heat shield, exhaust manifold, and air intake connectors are all listed with their individual figure references.

Cooling System, Fuel Tank and Electrical System

The cooling section covers the radiator assembly, oil cooler, shroud, aftercooler, fuel cooler and condenser, fan guard, fan clutch, and the variable geometry turbocharger piping, along with every hose, clamp, cushion and mounting bolt. Fuel tank and related parts list the tank, suction and supply piping, prefilter and water separator, fuel filter bracket, remote drain and clips. The electrical system covers battery and hold-down, main wiring harness and clamps, front and rear working lamps, additional rear lamp, beacon lamp, horn, travel alarm, rearview camera and bracket, battery disconnect switch, engine wiring harness, and the ground cables and terminals.

Hydraulic System

The hydraulic chapter is the largest single section of the catalog. It starts with the hydraulic tank, breather, bypass valve, related fittings and the suction and delivery piping that feeds the main pumps. Every spool of the 6-spool control valve is documented across an 18-part sequence of figures, followed by the hydraulic pump (the piston pump is broken out into 12 sub-figures), pump related parts, oil cooler piping, return, drain and swing piping, travel and boom piping, arm and bucket piping, LS piping, and the proportional pressure control (PPC) main piping. Solenoid valve bodies, inner parts, related parts, valve piping and mounting hardware round out the hydraulic section, so both the pumps and every control line can be looked up without leaving this file.

Main Frame, Operator’s Compartment and Guards

The main frame chapter lists the revolving frame, boom foot pin, and the various seat, cover, grommet and bracket plates that sit on the base structure. The operator’s compartment and control system chapter is extensive: operator’s seat (two-part listing), seat belt, top guard, front full guard LV2, floor mat, sun roller blind, air conditioner compressor and mountings, heater piping, V-belt, cab body and window, cab front window, cab front lower window, roof ventilator, cab door and door lock, open lock and door catch, wiper and room lamp, rubber antenna, speakers and window washer, roof cover, hanger, drink holder, KOMTRAX 3G antenna, KOMATSU emblem, console covers, monitor cover, luggage plate and cigarette lighter, air ducts and fresh-air filter, partition and recirculation air filter, pump controller and relays, air conditioner controller and KOMTRAX controller, main wiring harness clamps, rear cover with 12V converter, floor frame, PPC valve (three separate figures for travel, L.H. and R.H.), travel control lever, footrests, floor base, wiring harness, wiring harness clamps, window washer hose, work equipment control lever L.H. and R.H., console L.H. and R.H., armrests L.H. and R.H., air conditioner unit, air conditioner mounting and piping, PPC valve piping for travel and for work equipment, piping mounting, P.T. block and floor seals. The guard and related parts chapter covers the engine hood, frame, L.H. and R.H. doors, partitions, partition covers, upper cover, right side case, floor covers, handrail, rearview mirrors, counterweight (3920 kg), counterweight mounting, and the under covers including versions with blowby pressure sensor and refuelling pump.

Swing Circle, Travel Piping and Under Carriage

The swing circle chapter lists the swing circle itself, swing machinery and motor (broken into three sub-figures including the swing shock pressure reducing valve), swing motor mounting, swing drain piping, and the swivel joint inner, connecting and related parts. Travel and lower piping covers the travel piping for both the standard PC210-10M0 and the PC210LC-10M0 with Webasto heater provision, the travel motor and final drive in L.H. and R.H. versions, and the final drive covers. Under carriage lists the front idler and idler cushion for both models, track rollers, carrier rollers, the track shoe assemblies in 700 mm and 800 mm widths for the long undercarriage, the track frame for each model (including the 6-type link frame for the LC), plugs, track frame under covers and track roller guards.

Work Equipment

The work equipment chapter is written for the 5700 mm boom of the PC210-10M0 and the 5200 mm boom of the PC210LC-10M0, each with its own boom and bushing figure, top and bottom pin figure, arm and bucket cylinder piping, bucket cylinder piping, lubrication piping, attachment plugs, and lubrication piping with working lamp. Boom and arm cylinder inner parts are fully detailed, followed by the bucket cylinder head pin, arm assembly, arm plug, arm inner parts (bucket cylinder), bucket link, arm bucket cylinder hose, and the shipping parts for both models. Two arm lengths are covered for the heavy duty option – 2900 mm and 2400 mm – each with its own pins, plates, bushings, seals and hoses. Finally the bucket listings give you the 1.20 m3, 1304 mm width, horizontal pin type bucket for the PC210-10M0 with side cutters, and the 1.5 m3, 1415 mm width, horizontal pin type bucket for the PC210LC-10M0, including adapter, tooth, pin, cutter and shim assembly part numbers.

Marks and Plates, Other Equipment, Service Kits and Numerical Index

The marks and plates section lists the KOMATSU logo plates, lifting capacity charts, caution and warning plates, lubrication chart, air cleaner service plate, coolant decal, ROPS and FOPS plates and the KOMTRAX plate – useful when a decal has faded and you need to identify the exact replacement. Other equipment covers preventive maintenance service connectors and sensors, refuelling pump and its tubes and hoses, and additional track frame steps. The service kit and component parts chapter gathers the shoe bolt and nut kit, the boom cylinder seal kit, the arm cylinder seal kit, and both bucket cylinder seal kits with every O-ring, back-up ring, wear ring, buffer ring, packing and dust seal listed by part number. The book ends with a full numerical index (35 pages of it) that lets you work backwards from a part number to the figure and index where it appears.

Why This Parts Book Belongs in Your Workshop

Ordering the wrong part on a Komatsu excavator is expensive and slow – especially when it is a housing, a pump block or a final drive component that has to come from Japan. This parts book removes that risk. Every figure is indexed to a parts list, and each list shows the exact quantity required per machine or per subassembly, so you order exactly what the machine needs and nothing else. The interchange codes explain which discontinued numbers have been replaced and which line above can be used instead, which is critical when you are dealing with a machine built in the B10001-and-up range and a parts counter still working from an older catalog.

Whether you are rebuilding the SAA6D107E-1 cylinder head, replacing a control valve spool, chasing down a hydraulic hose on the boom, sourcing a track shoe assembly, or simply trying to identify the correct caution decal for the cab, the exact part number is in this file. The exploded views show how the components fit together, so reassembly is not guesswork. Independent shops, fleet maintenance crews, resellers and owner-operators all use this same catalog to keep PC210-10M0 and PC210LC-10M0 machines running with the right parts, first time.

IMAGES PREVIEW

Delivery is instant. The PDF is delivered to your account immediately after payment – no shipping, no waiting for a printed book, no customs. It opens on any device: desktop, laptop, tablet or phone, and you can print the pages you need on the bench or in the yard. Keep the file on a USB stick in the service truck for parts lookups in the field, or drop it into your shop server for the whole team to reference. One download, unlimited use, forever.