KOMATSU PC5500-6 HYDRAULIC MINING SHOVEL Operation & Maintenance Manual (SN:PC5500-6 15027) KOMATSU PC5500-6 – PDF DOWNLOAD

Description

KOMATSU PC5500-6 HYDRAULIC MINING SHOVEL Operation & Maintenance Manual (SN:PC5500-6 15027) KOMATSU PC5500-6

KOMATSU PC5500-6 HYDRAULIC MINING SHOVEL OPERATION & MAINTENANCE MANUAL (SN:PC5500-6 15027) KOMATSU PC5500-6 – PDF DOWNLOAD:

IMAGE PREVIEW:

SAMPLE PAGE FROM THE MANUAL:

KOMATSU PC5500-6 HYDRAULIC MINING SHOVEL Operation & Maintenance Manual (SN:PC5500-6 15027) KOMATSU PC5500-6

The Operation,- Lubrication and Maintenance Manual must always be at hand at the place of use of the machine, e. g. by stowing them in the box provided for such purpose.
● In addition to the Operation,- Lubrication and Maintenance Manual, observe and instruct the user in all other generally applicable legal and other mandatory regulations relevant to accident prevention and environmental protection. These compulsory regulations may also deal with the handling of hazardous substances, issuing and/or wearing of personal protective equipment, or traffic regulations.
● The Operation,- Lubrication and Maintenance Manual must be supplemented by instructions covering the duties involved in supervising and notifying special organizational features, such as job organization, working sequences or the personnel entrusted with the work.
● Personnel entrusted with work on the machine must have read the Operation,- Lubrication and Maintenance Manual and in particular the chapter on safety before beginning work. Reading the instructions after work has begun is too late. This applies especially to persons working only occasionally on the machine, e. g. during setting up or maintenance.
● Check – at least from time to time – whether the personnel is carrying out the work in compliance with the Operation,- Lubrication and Maintenance Manual and paying attention to risks and safety factors.
● For reasons of security, long hair must be tied back or otherwise secured, garments must be close-fitting and no jewellery  such as rings – may be worn. Injury may result from being caught up in the machinery or from rings catching on moving parts.
● Use protective equipment wherever required by the circumstances or by law.
● Observe all safety instructions and warnings attached to the machine.
● See to it that safety instructions and warnings attached to the machine are always complete and perfectly legible.
● In the event of safety-relevant modifications or changes in the behaviour of the machine during operation, stop the machine immediately and report the malfunction to the competent authority/person.

TABLE OF CONTENTS:

KOMATSU PC5500-6 HYDRAULIC MINING SHOVEL Operation & Maintenance Manual (SN:PC5500-6 15027) KOMATSU PC5500-6

MAIN MENU.......................................................................................................  0
COVER...........................................................................................................  1
1. INTRODUCTION................................................................................................  3
	1.1 CONTENTS OF THE BINDER..................................................................................  4
	1.2 DIVISION OF THE BINDER..................................................................................  5
	1.3 DESIGNATED USE OF THE SHOVEL............................................................................  6
	1.4 DELIVERY OF THE SHOVEL..................................................................................  7
	1.5 EXPLANATION OF ABBREVIATIONS............................................................................  8
	1.6 TABLE OF CONTENTS.......................................................................................  9
2. SAFETY...................................................................................................... 15
	2.1 SAFETY INSTRUCTIONS..................................................................................... 16
		2.1.1 WARNINGS AND SYMBOLS.............................................................................. 16
		2.1.2 BASIC OPERATION AND DESIGNATED USE OF THE HYDRAULIC SHOVEL........................................ 16
		2.1.3 ORGANIZATIONAL MEASURES........................................................................... 17
		2.1.4 SELECTION AND QUALIFICATION OF PERSONNEL - BASICRESPONSIBILITIES................................. 19
		2.1.5 SAFETY INSTRUCTIONS GOVERNING SPECIFIC OPERATIONAL PHASES......................................... 20
		2.1.6 WARNING OF SPECIAL DANGERS........................................................................ 23
		2.1.7 TRANSPORTING AND TOWING -RECOMMISSIONING.......................................................... 25
		2.1.8 SPECIAL SAFETY EQUIPMENT.......................................................................... 25
		2.1.9 SAFETY HARNESS IN CONFORMITY WITH EN 361 (EUROPEANSTANDARD)...................................... 29
3. OPERATION................................................................................................... 37
	3.1 FOREWORD................................................................................................ 38
	3.2 CONSTRUCTION OF THE SHOVEL.............................................................................. 39
		3.2.1 OVERALL VIEW...................................................................................... 39
		3.2.2 UNDERCARRIAGE AND SUPERSTRUCTURE.................................................................. 40
		3.2.3 HYDRAULICALLY OPERATED ACCESS LADDER.............................................................. 46
		3.2.4 EMERGENCY ESCAPE LADDER........................................................................... 50
		3.2.5 EMERGENCY ENGINE SHUTDOWN FROM GROUND MAN OR OPERATOR WARNING SYSTEM.............................. 52
		3.2.6 OPERATOR’S CAB WITH INTEGRATED FALLING OBJECT PROTECTIVE STRUCTURE (FOPS)......................... 54
		3.2.7 ENGINE OIL MANAGEMENT SYSTEM...................................................................... 62
	3.3 OPERATOR’S CAB - CONTROLS............................................................................... 70
		3.3.1 CONTROLS WITH BACKHOE ATTACHMENT.................................................................. 70
		3.3.2 CONTROLS WITH BOTTOM DUMP BUCKET ATTACHMENT....................................................... 74
	3.4 ELECTRONIC MONITORING AND CONTROL SYSTEM ECS............................................................ 88
	3.5 OPERATING THE HEATER, VENTILATION AND AIRCONDITIONING..................................................192
		3.5.1 A - HEATING.......................................................................................192
		3.5.2 B - COOLING.......................................................................................193
		3.5.3 COMBINED OPERATION OF AIR CONDITIONING AND HEATING................................................193
	3.6 POWER HOUSE.............................................................................................194
		3.6.1 EMERGENCY ENGINE SHUTDOWN SWITCHES................................................................195
		3.6.2 CONTROL AND FILTER PANEL OF REAR- AND FRONT POWER UNIT............................................197
	3.7 ELECTRICAL EQUIPMENT IN CAB BASE........................................................................198
		3.7.1 SWITCH BOARD (X2) IN CAB BASE.....................................................................201
	3.8 CHECKS BEFORE STARTING THE ENGINES......................................................................214
	3.9 STARTING THE ENGINES....................................................................................220
		3.9.1 STARTING PROCEDURE................................................................................223
	3.10 MOVING THE SHOVEL......................................................................................231
		3.10.1 TRAVEL CONTROL WITH FOOT PEDALS..................................................................231
		3.10.2 TRAVELLING INSTRUCTIONS..........................................................................234
	3.11 SLEWING AND BRAKING THE SUPERSTRUCTURE.................................................................235
		3.11.1 SLEWING THE SUPERSTRUCTURE.......................................................................235
	3.12 WORKING WITH THE ATTACHMENT............................................................................238
		3.12.1 MACHINES EQUIPPED WITH ”EURO” CONTROL SYSTEM.....................................................238
		3.12.2 MACHINES EQUIPPED WITH ”KMG” CONTROL SYSTEM......................................................239
		3.12.3 BOTTOM DUMP BUCKET...............................................................................240
		3.12.4 DROP BALL OPERATION..............................................................................241
		3.12.5 COMBINED OPERATION CYCLES........................................................................244
	3.13 WORKING INSTRUCTIONS...................................................................................246
		3.13.1 STABILITY OF THE SHOVEL..........................................................................246
		3.13.2 SHOVEL OPERATION.................................................................................246
	3.14 PARKING THE SHOVEL.....................................................................................249
	3.15 STOPPING THE ENGINES...................................................................................250
	3.16 OPERATION OF THE LUBRICATION SYSTEM....................................................................254
		3.16.1 CENTRAL LUBRICATION SYSTEM ”CLS”.................................................................254
		3.16.2 SWING CIRCLE PINION LUBRICATION SYSTEM ”SLS”.....................................................256
	3.17 FIRE DETECTION AND SUPPRESSION SYSTEM..................................................................258
		3.17.1 HIGH LEVEL ALARM ”FIRE”..........................................................................261
		3.17.2 ENGINE SHUT-DOWN THROUGH FUEL SHUT-OFF SOLENOID VALVE............................................261
		3.17.3 ACTUATION MODES OF THE FIRE SUPPRESSION SYSTEM...................................................261
		3.17.4 INDICATION OF OPERATIONAL MODES AT CONTROL MODULE, AFTER AUTOMATIC ACTUATION OF THE FIRE S.......263
		3.17.5 LOCATION OF THE EXTINGUISHING AGENT TANK ASSEMBLIES AND EXPELLANT GAS CARTRIDGES ON POWER.......265
	3.18 CENTRAL REFILLING SYSTEM...............................................................................266
		3.18.1 SYSTEMS CONNECTED TO THE REFILLING SYSTEM........................................................267
		3.18.2 OPERATING THE HYDRAULIC SERVICE ARM..............................................................269
		3.18.3 RECEIVER PANEL WITH MONITOR BOX..................................................................271
		3.18.4 REFILLABLE GREASE CONTAINERS OF THE AUTOMATIC LUBRICATION SYSTEMS................................277
	3.19 SERVICE CRANE..........................................................................................278
		3.19.1 OPERATING THE CRANE..............................................................................279
	3.20 WORK ON THE LOADER ATTACHMENT..........................................................................282
	3.21 TRANSPORTATION AND LIFTING OF THE SHOVEL...............................................................283
		3.21.1 DISASSEMBLING OF THE SHOVEL......................................................................283
		3.21.2 TRANSPORTATION AND LIFTING.......................................................................283
	3.22 RETRIEVAL PROCEDURE....................................................................................284
	3.23 SHOVEL STORAGE.........................................................................................285
		3.23.1 PREPARING FOR STORAGE............................................................................285
		3.23.2 ONE MONTH REPETITIVE SERVICE PERIOD..............................................................286
		3.23.3 SIX MONTH REPETITIVE SERVICE PERIOD..............................................................286
		3.23.4 PREPARING FOR OPERATION..........................................................................287
	3.24 TROUBLE SHOOTING.......................................................................................288
		3.24.1 ENGINE...........................................................................................288
		3.24.2 HYDRAULIC SYSTEM.................................................................................289
		3.24.3 FINAL DRIVES AND SWING GEAR......................................................................290
		3.24.4 CRAWLER TRACKS...................................................................................290
4. MAINTENANCE.................................................................................................291
	4.1 FOREWORD................................................................................................292
	4.2 PRECAUTIONS FOR MAINTENANCE.............................................................................293
	4.3 FUEL AND LUBRICANTS.....................................................................................295
	4.4 FILLING CAPACITIES......................................................................................297
	4.5 STANDARD TORQUE LIST....................................................................................298
	4.6 LUBRICATION AND MAINTENANCE SCHEDULE....................................................................299
		4.6.1 INITIAL SERVICING.................................................................................299
		4.6.2 PERIODIC SERVICING INTERVALS......................................................................299
		4.6.3 PERIODIC SERVICING SCHEDULE.......................................................................300
		4.6.4 EXTENDED SERVICE INTERVALS FOR ENGINES WITH ENGINE OIL MANAGEMENT SYSTEM..........................307
		4.6.5 RESETTING THE ENGINE OIL BURNING SYSTEM CENTINEL..................................................309
		4.6.6 MAINTENANCE OF THE ENGINES........................................................................311
		4.6.7 ENGINE FUEL FILTER LOCATIONS......................................................................313
	4.7 WHEN NECESSARY..........................................................................................314
		4.7.1 ENGINE AIR CLEANER MAINTENANCE....................................................................315
		4.7.2 SWING CIRCLE TOOTHING LUBRICATION.................................................................319
		4.7.3 AUTOMATIC LUBRICATION SYSTEMS FILL GREASE CONTAINERS..............................................321
		4.7.4 TRACK ROLLERS AND GUIDE WHEELS - REPLACE FLOATING SEALS...........................................325
		4.7.5 COLD STARTING AID, REPLACE FLUID CYLINDER.........................................................327
	4.8 EVERY 10 OPERATING HOURS OR DAILY.......................................................................328
		4.8.1 WALK - AROUND INSPECTION..........................................................................329
		4.8.2 AIR CLEANER - CLEAN PRE-CLEANER...................................................................337
		4.8.3 RADIATORS - CHECK COOLANT LEVEL...................................................................339
		4.8.4 TRACK GROUPS - CLEAN..............................................................................339
	4.9 EVERY 50 OPERATING HOURS OR WEEKLY......................................................................340
		4.9.1 SWING GEARS AND MOTOR ADAPTER HOUSINGS - CHECK OIL LEVELS.........................................341
		4.9.2 TRAVEL GEARS, MOTOR ADAPTER HOUSINGS AND FINAL DRIVES CHECK OIL LEVELS............................345
		4.9.3 PTO’s (PUMP DISTRIBUTOR GEARS) AND OIL RESERVOIR - CHECK OIL LEVEL................................351
		4.9.4 HYDRAULIC ACCESS LADDER - CHECK SAFETY SENSOR.....................................................355
		4.9.5 HYDRAULIC OIL COOLERS - INSPECT AND CLEAN IF NECESSARY............................................357
	4.10 EVERY 250 OPERATING HOURS OR MONTHLY...................................................................358
		4.10.1 AIR CONDITIONING COMPRESSOR - CHECK DRIVE BELT TENSION...........................................359
		4.10.2 SIGNAL HORN COMPRESSOR - LUBRICATE...............................................................361
		4.10.3 HYDRAULIC OIL COOLER FAN BEARINGS - CHECK FOR LEAKAGE AND CLEAN BREATHER FILTER..................361
		4.10.4 RADIATOR FAN BEARINGS - CHECK FOR LEAKAGE AND CLEAN BREATHER FILTER..............................361
		4.10.5 AUTOMATIC LUBRICATION SYSTEMS - CLEAN IN-LINE GREASE FILTER AND CHECK BREATHER FILTER............363
		4.10.6 CAB AIR CLEANER - CLEAN OR REPLACE FILTER ELEMENT................................................365
		4.10.7 AIR CONDITIONING FOR OPERATOR’S CAB - CHECK REFRIGERANT LEVEL....................................367
	4.11 EVERY 500 OPERATING HOURS OR QUARTERLY.................................................................368
		4.11.1 BATTERIES - CHECK FLUID LEVEL....................................................................369
		4.11.2 FLEXIBLE DRIVE COUPLINGS - CHECK OIL LEVEL.......................................................371
		4.11.3 FUEL TANK - DRAIN CONDENSATION...................................................................373
		4.11.4 CRAWLER TRACK - INSPECTION.......................................................................375
	4.12 EVERY 1000 OPERATING HOURS OR EVERY 6MONTH............................................................380
		4.12.1 HIGH STRENGTH BOLT CONNECTIONS - CHECK TORQUE LOAD...............................................381
		4.12.2 HYDRAULIC SYSTEM - FILTER SERVICE................................................................439
		4.12.3 PTO’S (PUMP DISTRIBUTOR GEARS), SWING GEARS AND TRAVEL GEARS - OIL SAMPLE ANALYSIS...............453
		4.12.4 SIGNAL HORN COMPRESSOR - CLEAN AND LUBRICATE.....................................................455
		4.12.5 HYDRAULIC TRACK TENSIONING SYSTEM - CHECK PRESSURE ACCUMULATORS..................................457
		4.12.6 WATER FILTER - REPLACE FILTER CARTRIDGE..........................................................459
		4.12.7 HYDRAULIC OIL COOLER - INSPECT AND LUBRICATE DOOR HINGES.........................................461
		4.12.8 MACHINERY HOUSE DOORS - INSPECT AND LUBRICATE DOOR HINGES........................................463
	4.13 EVERY 2000 OPERATING HOURS OR YEARLY...................................................................464
		4.13.1 HYDRAULIC SYSTEM - CHANGE OIL, REPLACE SUCTION STRAINERS AND PULSATION DAMPER....................465
		4.13.2 EMERGENCY ESCAPE LADDER - INSPECTION.............................................................477
	4.14 EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR................................................478
		4.14.1 SWING GEARS AND MOTOR ADAPTER HOUSING - CHANGE OIL...............................................479
		4.14.2 TRAVEL GEARS, MOTOR ADAPTER HOUSINGS AND FINAL DRIVES CHANGE OIL.................................487
		4.14.3 PTO (PUMP DISTRIBUTOR GEAR) - CHANGE OIL.........................................................491
	4.15 FIRE PREVENTION........................................................................................494
	4.16 WELD REPAIRS...........................................................................................496
		4.16.1 PROTECTIVE MEASURES BEFORE STARTING WELD REPAIRS ON THE UNDERCARRIAGE............................499
		4.16.2 PROTECTIVE MEASURES BEFORE STARTING WELD REPAIRS ON THE LOADER ATTACHMENT........................501
		4.16.3 PROTECTIVE MEASURES BEFORE STARTING WELD REPAIRS ON THE SUPERSTRUCTURE...........................503
		4.16.4 AFTER FINISHING THE REPAIR WELDINGS ON THE SUPERSTRUCTURE........................................505

PLEASE NOTE:

⦁ This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
⦁ This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
⦁ Require some other service manual or have any queries: please WRITE to us at [email protected]