Komatsu Wb140-2, Wb150-2 Backhoe Loaders Operation & Maintenance Manual – PDF DOWNLOAD

Description

Komatsu Wb140-2, Wb150-2 Backhoe Loaders Operation & Maintenance Manual

FILE DETAILS:

Komatsu Wb140-2, Wb150-2 Backhoe Loaders Operation & Maintenance Manual 

Model Specification: KOMATSU WB140-2, WB150-2 BACKHOE LOADERS
Language: English
File Format: PDF
Total Pages: 233
Requirements: Adobe PDF Reader
ZOOM IN/OUT: YES
Downloadable: YES

KOMATSU WB140-2, WB150-2 BACKHOE LOADERS OPERATION & MAINTENANCE MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Komatsu Wb140-2, Wb150-2 Backhoe Loaders Operation & Maintenance Manual 

FOREWORD:

• This manual is supplied by Komatsu in order to provide customers with all the necessary information on the machine and the safety regulations related to it, together with the use and maintenance instructions that enable the operator to exploit the capacity of the machine with optimal results and to keep the machine efficient over time.
• The operation manual, together with the spare parts catalog, is an integral part of the machine and must accompany it, even when it is resold, until its final disposal.
• The manual must be handled with the greatest care and always kept on board the machine, so that it can be consulted at any moment; it must be placed in the appropriate compartment, where also the ownership documents and the logbook are usually kept.
• This manual must be given to the persons who have to use the machine and carry out the routine maintenance operations; they must read the contents carefully more than once, in such a way as to clearly understand what are the correct operating conditions and the dangerous conditions that must be avoided. In case of loss or damage, request a new copy to Komatsu or to your Komatsu Distributor.
• The illustrations contained in this manual may represent machine configurations that are available on request. Komatsu machines are constantly improved in order to increase their efficiency and reliability; this manual sums up all the information regarding the most recent techniques applied at the moment in which the machine is marketed. For any updated information, contact your Komatsu Distributor.
• Punctual periodic annotations regarding the maintenance operations that have been carried out are important to have a clear prospect of the situation and to know exactly what has been done and what has to be done after the next maintenance interval. Therefore, it is advisable to consult either the hour meter and the maintenance plan frequently.
• This manual may contain attachments and optional equipment that are not available in your area. Consult your
  Komatsu distributor for those items you may require.
• The table included in this manual must be filled in with the machine data, which are the data that must always be indicated to the Dsrtibutor when requiring assistance and ordering spare parts.

TABLE OF CONTENTS:

Komatsu Wb140-2, Wb150-2 Backhoe Loaders Operation & Maintenance Manual 

MAIN MENU....................................................................................................................  0
COVER........................................................................................................................  1
TABLE OF CONTENTS............................................................................................................  2
FOREWORD..................................................................................................................... 10
INFORMATION ON SAFETY........................................................................................................ 11
INTRODUCTION................................................................................................................. 13
INTENDED USES................................................................................................................ 13
IMPROPER OR UNAUTHORIZED USES................................................................................................ 13
MAIN CHARACTERISTICS......................................................................................................... 14
RUNNING-IN .................................................................................................................. 14
PRODUCT IDENTIFICATION....................................................................................................... 15
MACHINE SERIAL NUMBER........................................................................................................ 15
MACHINE IDENTIFICATION PLATE................................................................................................. 15
ENGINE SERIAL NUMBER AND EMISSION LABEL...................................................................................... 16
FRONT AXLE SERIAL NUMBER..................................................................................................... 16
REAR AXLE SERIAL NUMBER...................................................................................................... 16
TRANSMISSION SERIAL NUMBER................................................................................................... 17
 CAB SERIAL NUMBER........................................................................................................... 17
CANOPY SERIAL NUMBER......................................................................................................... 17
SERIAL NUMBERS AND DEALER'S ADDRESS.......................................................................................... 18
SAFETY AND ACCIDENT PREVENTION............................................................................................... 20
	1. GENERAL PRECAUTIONS................................................................................................... 21
		1.1 GENERAL SAFETY RULES............................................................................................. 21
		1.2 SAFETY DEVICES AND GUARDS........................................................................................ 21
		1.3 CLOTHING AND PERSONAL PROTECTION ITEMS........................................................................... 21
		1.4 UNAUTHORIZED MODIFICATIONS....................................................................................... 21
		1.5 LEAVING THE OPERATOR'S SEAT...................................................................................... 22
		1.6 GETTING ON AND OFF THE MACHINE................................................................................... 22
		1.7 CHECKING THE REAR-VIEW MIRROR.................................................................................... 23
		1.8 PREVENTING FIRES DUE TO FUEL AND OIL............................................................................. 23
		1.9 PREVENTING BURNS................................................................................................. 23
		1.10 PREVENTING DAMAGE DUE TO ASBESTOS POWDER ....................................................................... 24
		1.11 PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT.................................................................. 24
		1.12 FIRE EXTINGUISHERS AND FIRST AID KIT............................................................................ 24
		1.13 PRECAUTIONS CONCERNING THE CAB STRUCTURE........................................................................ 25
		1.14 PRECAUTIONS CONCERNING THE EQUIPMENT............................................................................ 25
PRECAUTIONS.................................................................................................................. 26
	2. PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE.................................................................... 27
		2.1 SAFETY ON THE WORK SITE.......................................................................................... 27
		2.2 FIRE PREVENTION.................................................................................................. 27
		2.3 PRECAUTIONS TO BE TAKEN FOR THE OPERATOR'S CAB................................................................... 27
		2.4 ROOM VENTILATION................................................................................................. 28
		2.5 CLEANING WINDOWS, MIRRORS AND LIGHTS-CHECKING THE WINDSHIELD WIPER BLADES AND THE LIGHT BULBS.................... 28
	3. PRECAUTIONS TO BE TAKEN WHEN WORKING.................................................................................. 29
		3.1 STARTING THE ENGINE.............................................................................................. 29
		3.2 RULES FOR ROAD TRAVEL............................................................................................ 29
		3.3 CHECKS FOR TRAVELING IN REVERSE.................................................................................. 30
		3.4 MOVING THE MACHINE............................................................................................... 31
		3.5 WORKING ON SLOPES................................................................................................ 31
		3.6 PREVENTING ELECTROCUTION......................................................................................... 32
		3.7  VISIBILITY...................................................................................................... 33
		3.8 WORKING ON ICY OR SNOW-COVERED SURFACES.......................................................................... 33
		3.9 PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT................................................................... 33
		3.10 WORKING ON LOOSE GROUND......................................................................................... 33
		3.11 PARKING THE MACHINE............................................................................................. 34
	4. TRANSPORTING THE MACHINE ON OTHER VEHICLES............................................................................ 35
		4.1 LOADING AND UNLOADING............................................................................................ 35
		4.2 THE ROUTE........................................................................................................ 35
	5. THE BATTERY........................................................................................................... 36
		5.1 SAFETY PRECAUTIONS FOR WORK ON BATTERIES......................................................................... 36
		5.2  STARTING THE ENGINE WITH JUMP LEADS............................................................................. 37
	6. PRECAUTIONS FOR EMERGENCY RECOVERY.................................................................................... 38
	7. PRECAUTIONS TO BE TAKEN DURING MAINTENANCE............................................................................ 39
		7.1 WARNING PLATES................................................................................................... 39
		7.2 TOOLS............................................................................................................ 39
		7.3 PERSONAL PRECAUTIONS............................................................................................. 39
		7.4 EQUIPMENT........................................................................................................ 40
		7.5 WORKING UNDER THE MACHINE........................................................................................ 40
		7.6 KEEPING THE MACHINE CLEAN........................................................................................ 40
		7.7 RUNNING THE ENGINE DURING MAINTENANCE............................................................................ 40
		7.8 RULES FOR REFUELING AND ADDING OIL............................................................................... 41
		7.9 LEVEL OF COOLANT IN THE RADIATOR................................................................................. 41
		7.10 USING LAMPS..................................................................................................... 41
		7.11 BATTERY AND ALTERNATOR PRECAUTIONS.............................................................................. 42
		7.12 PRECAUTIONS CONCERNING THE STARTER.............................................................................. 42
		7.13 PRECAUTIONS REGARDING HIGH PRESSURE HOSES....................................................................... 42
		7.14 PRECAUTIONS TO BE TAKEN WHEN WORKING ON HIGH PRESSURE SYSTEMS................................................... 43
		7.15 PRECAUTIONS FOR MAINTENANCE WORK INVOLVING HIGH TEMPERATURES AND PRESSURES...................................... 43
		7.16 THE RADIATOR COOLING FAN AND FAN BELT........................................................................... 43
		7.17 WASTE MATERIALS................................................................................................. 44
		7.18 PRECAUTIONS FOR INFLATING TIRES................................................................................. 44
		7.19 PRECAUTIONS FOR THE INSTALLATION OF THE EXHAUST SYSTEM TAILPIPE................................................. 44
	8. SAFETY PLATES......................................................................................................... 45
		8.1 POSITION OF THE SAFETY PLATES.................................................................................... 45
		8.2 POSITION OF THE PICTOGRAMS....................................................................................... 59
		8.3 PICTOGRAMS AND RELEVANT MEANINGS................................................................................. 61
		8.4 VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED.................................................................... 64
TECHNICAL SPECIFICATIONS..................................................................................................... 66
	9. TECHNICAL DATA........................................................................................................ 67
		9.1 STANDARD OVERALL DIMENSIONS...................................................................................... 67
		9.2 TECHNICAL CHARACTERISTICS WB140-2 (ASPIRATED ENGINE)............................................................. 68
		9.3 TECHNICAL CHARACTERISTICS WB140-2 (TURBOCHARGED ENGINE).......................................................... 69
		9.4 TECHNICAL CHARACTERISTICS WB150-2................................................................................ 70
		9.5 LIFTING CAPACITIES............................................................................................... 71
			9.5.1 SYMBOL TABLE............................................................................................... 71
			9.5.2 LIFTING CAPACITY WB140-2................................................................................... 72
			9.5.3 LIFTING CAPACITY WB150-2................................................................................... 74
DESCRIPTION AND USE OF THE MACHINE........................................................................................... 76
	10. SAFETY LOCKS......................................................................................................... 77
		10.1 FRONT LOADER LOCK............................................................................................... 77
		10.2 BACKHOE LOCKS................................................................................................... 79
	11. GENERAL VIEWS........................................................................................................ 80
		11.1 FRONT GENERAL VIEW.............................................................................................. 80
		11.2 BACKHOE GENERAL VIEW............................................................................................ 81
		11.3 CAB INSIDE GENERAL VIEW......................................................................................... 82
	12. INSTRUMENTS AND CONTROLS............................................................................................. 83
		12.1 FRONT INSTRUMENTS............................................................................................... 83
		12.2 SIDE INSTRUMENTS................................................................................................ 86
		12.3 PUSH BUTTONS ON THE FRONT LOADER CONTROL LEVER.................................................................. 90
		12.4 PUSH BUTTON ON THE GEARSHIFT LEVER.............................................................................. 91
		12.5 ELECTRICAL ACCESSORIES.......................................................................................... 91
		12.6 MACHINE CONTROLS................................................................................................ 92
	13. FUSES AND RELAYS.....................................................................................................105
		13.1 EQUIPMENT FUSES AND RELAYS......................................................................................105
		13.2 ENGINE FUSES AND RELAYS.........................................................................................107
	14. GUARDS, CAB AND DRIVER'S SEAT........................................................................................109
		14.1 ENGINE HOOD.....................................................................................................109
		14.2 CANOPY..........................................................................................................109
		14.3 CAB.............................................................................................................110
		14.4 VENTILATION AND HEATING.........................................................................................112
		14.5 SEAT............................................................................................................113
		14.6 SAFETY BELT.....................................................................................................113
		14.7 FIRE EXTINGUISHER...............................................................................................114
		14.8 FIRST AID KIT...................................................................................................114
		14.9 TECHNICAL DOCUMENTATION.........................................................................................114
		14.10 ADDITIONAL TOOL CASE (IF PROVIDED).............................................................................114
	15. USE OF THE MACHINE...................................................................................................116
		15.1 CHECKS BEFORE STARTING THE ENGINE...............................................................................116
			15.1.1 VISUAL CHECKS.............................................................................................116
			15.1.2 DAILY CHECKS..............................................................................................116
			15.1.3 OPERATIONAL CHECKS........................................................................................117
		15.2 STARTING THE ENGINE.............................................................................................118
			15.2.1 STARTING WITH WARM ENGINE OR IN TEMPERATE CLIMATES (MORE THAN 0°C (32°F)).................................118
			15.2.2 STARTING WITH COLD ENGINE OR IN COLD CLIMATES (UP TO -16°C (3°F)).........................................119
			15.2.3 STARTING THE ENGINE IN VERY COLD AREAS  (UP TO -30°C (-22°F)).............................................119
		15.3 WARMING THE ENGINE..............................................................................................120
		15.4 HEATING THE HYDRAULIC OIL.......................................................................................120
		15.5 HOW TO MOVE THE MACHINE.........................................................................................121
			15.5.1 LOCKING THE DIFFERENTIAL..................................................................................122
			15.5.2 ENGAGING THE FOUR-WHEEL DRIVE.............................................................................122
			15.5.3 WORKING ON SLOPES.........................................................................................123
			15.5.4 MAXIMUM IMMERSION DEPTH...................................................................................124
	16. PARKING THE MACHINE..................................................................................................125
		16.1 PARKING ON LEVEL GROUND.........................................................................................125
		16.2 PARKING ON SLOPES...............................................................................................126
	17. STOPPING THE ENGINE..................................................................................................127
	18. TRANSPORTING THE MACHINE ON OTHER SURFACES...........................................................................128
		18.1 LOADING AND UNLOADING THE MACHINE...............................................................................128
		18.2 TRANSPORT.......................................................................................................129
	19. PRECAUTIONS TO BE TAKEN IN THE COLD SEASON...........................................................................130
		19.1 FUEL AND LUBRICANTS.............................................................................................130
		19.2 COOLANT.........................................................................................................130
		19.3 BATTERY.........................................................................................................130
		19.4 OTHER PRECAUTIONS...............................................................................................131
		19.5 PRECAUTIONS TO BE TAKEN AT THE END OF WORK......................................................................131
	20. PRECAUTIONS TO BE TAKEN IN THE WARM SEASON...........................................................................132
	21. USING THE MACHINE AS A LOADER........................................................................................133
		21.1 BUCKET POSITION INDICATOR.......................................................................................133
		21.2 ORGANIZING THE WORK AREA........................................................................................133
			21.2.1 LOADING HEAPED AND LEVEL MATERIAL.........................................................................134
			21.2.2 LOADING OPERATIONS ON SLOPES..............................................................................134
		21.3 CHANGING THE STANDARD FRONT BUCKET..............................................................................135
	22. USING THE MACHINE AS AN EXCAVATOR....................................................................................136
		22.1 POSITIONING THE BUCKET ACCORDING TO THE WORK THAT MUST BE CARRIED OUT...........................................136
		22.2 POSITIONING THE MACHINE FOR DIGGING OPERATIONS..................................................................137
		22.3 DIGGING METHOD..................................................................................................138
		22.4 CHANGING THE BACKHOE BUCKET.....................................................................................139
	23. TROUBLESHOOTING......................................................................................................140
		23.1 IF THE FUEL HAS BEEN COMPLETELY DEPLETED........................................................................140
		23.2 IF THE BATTERY IS DEPLETED......................................................................................140
			23.2.1 STARTING WITH BOOSTER CABLES..............................................................................141
		23.3 OTHER TROUBLES..................................................................................................142
			23.3.1 ELECTRICAL CIRCUIT........................................................................................142
			23.3.2 HYDRAULIC SYSTEM..........................................................................................142
			23.3.3 BRAKING SYSTEM............................................................................................143
			23.3.4 TORQUE CONVERTER SYSTEM...................................................................................143
			23.3.5 ENGINE....................................................................................................144
MAINTENANCE..................................................................................................................146
	24. GUIDE TO MAINTENANCE.................................................................................................147
	25. MAINTENANCE NOTES....................................................................................................149
		25.1 NOTES REGARDING THE ENGINE......................................................................................149
			25.1.1 ENGINE OIL................................................................................................149
			25.1.2 COOLANT...................................................................................................149
			25.1.3 FUEL......................................................................................................150
		25.2 NOTES REGARDING THE HYDRAULIC SYSTEM............................................................................150
		25.3 NOTES REGARDING THE ELECTRICAL SYSTEM...........................................................................151
		25.4 NOTES REGARDING LUBRICATION.....................................................................................151
		25.5 PARTS SUBJECT TO WEAR THAT PERIODICALLY NEED CHANGING...........................................................152
	26. FUEL, COOLANT AND LUBRICANTS.........................................................................................153
		26.1 LUBRICATION DIAGRAM.............................................................................................157
		26.2 LUBRICATION DIAGRAM (MULTIPURPOSE BUCKET AND PALLET FORKS)......................................................158
		26.3 LUBRICATION DIAGRAM (FRONT BUCKET RAPID COUPLINGS)..............................................................159
		26.4 LUBRICATION DIAGRAM (TELESCOPIC ARM)............................................................................160
	27. NUT AND BOLT TIGHTENING TORQUES......................................................................................161
		27.1 STANDARD TIGHTENING TORQUES.....................................................................................161
		27.2 SPECIFIC TIGHTENING TORQUES.....................................................................................161
	28. MAINTENANCE PLAN.....................................................................................................162
		28.1 CHECK BEFORE STARTING...........................................................................................165
			28.1.A VARIOUS CHECKS............................................................................................165
			28.1.B CHECKING THE FUEL LEVEL...................................................................................165
			28.1.C CHECKING THE COOLANT LEVEL................................................................................166
			28.1.D CHECKING THE ENGINE OIL LEVEL.............................................................................166
			28.1.E CHECKING THE HYDRAULIC CIRCUIT OIL LEVEL..................................................................167
			28.1.F LUBRICATING THE JOINTS....................................................................................167
		28.2 MAINTENANCE EVERY 50 HOURS OF OPERATION.........................................................................170
			28.2.A CHECKING THE RADIATOR FLUID LEVEL.........................................................................170
			28.2.B CHECKING THE BRAKING SYSTEM OIL LEVEL.....................................................................170
			28.2.C LUBRICATING THE PROPELLER SHAFTS..........................................................................171
			28.2.D LUBRICATING THE FRONT AXLE JOINTS CENTRAL COUPLING........................................................172
			28.2.E DRAINING THE WATER SEPARATOR..............................................................................172
			28.2.F CHECKING THE TIRE PRESSURE................................................................................173
			28.2.G CHECKING THE ELECTRICAL SYSTEM............................................................................173
		28.3 MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION..............................................................174
		28.4 MAINTENANCE EVERY 250 HOURS OF OPERATION........................................................................174
			28.4.A ADJUSTING THE FAN BELT TENSION............................................................................174
			28.4.B CLEANING THE OUTSIDE OF THE RADIATORS.....................................................................175
			28.4.C CHECKING THE BATTERY ELECTROLYTE LEVEL....................................................................175
			28.4.D CHECKING THE FRONT AXLE OIL LEVELS........................................................................176
			28.4.E CHECKING THE REAR AXLE OIL LEVELS.........................................................................176
			28.4.F CHECKING THE HYDRAULIC TRANSMISSION OIL LEVEL.............................................................177
			28.4.G CHECKING THE WHEEL NUT DRIVING TORQUE.....................................................................177
		28.5 MAINTENANCE EVERY 500 HOURS OF OPERATION........................................................................178
			28.5.A CHANGING THE ENGINE OIL...................................................................................178
			28.5.B CHANGING THE ENGINE OIL FILTER............................................................................178
			28.5.C CHANGING THE HYDRAULIC SYSTEM OIL FILTER..................................................................179
			28.5.D CHANGING THE FUEL FILTER..................................................................................180
			28.5.E DRAINING THE FUEL TANK....................................................................................181
		28.6 MAINTENANCE EVERY 1000 HOURS OF OPERATION.......................................................................182
			28.6.A CHANGING THE FRONT AXLE OIL...............................................................................182
			28.6.B CHANGING THE REAR AXLE OIL................................................................................183
			28.6.C CHANGING THE HYDRAULIC TRANSMISSION OIL...................................................................184
			28.6.D CHANGING THE HYDRAULIC TRANSMISSION FILTER................................................................185
			28.6.E CHECKING AND ADJUSTING THE ENGINE VALVE CLEARANCE.........................................................185
		28.7 MAINTENANCE EVERY 2000 HOURS OF OPERATION.......................................................................186
			28.7.A CHANGING THE HYDRAULIC SYSTEM OIL AND CLEANING THE SUCTION FILTER.........................................186
			28.7.B CHANGING THE COOLANT......................................................................................188
			28.7.C CHANGING THE BRAKING SYSTEM OIL...........................................................................189
			28.7.D CHECKING THE ALTERNATOR AND THE STARTER...................................................................189
		28.8 WHEN REQUIRED...................................................................................................190
			28.8.A CHECKING, CLEANING OR CHANGING THE AIR CLEANER CARTRIDGE..................................................190
			28.8.B CHECKING AND CLEANING THE CAB AIR FILTER..................................................................191
			28.8.C BLEEDING THE BRAKING CIRCUIT..............................................................................192
			28.8.D WASHING THE COOLING CIRCUIT...............................................................................192
			28.8.E CLEANING THE WATER SEPARATOR..............................................................................194
			28.8.F CHECKING AND ADJUSTING THE FRONT WHEEL TOE-IN.............................................................194
			28.8.G CHECKING AND ADJUSTING THE PARKING BRAKE..................................................................195
			28.8.H CHECKING THE BRAKING EFFICIENCY...........................................................................196
			28.8.J CHECKING AND ADJUSTING THE BRAKE PEDAL STROKE.............................................................197
			28.8.K ADJUSTING THE AUTOMATIC RETURN OF THE FRONT BUCKET TO THE DIGGING POSTION.................................197
	29. LONG PERIODS OF INACTIVITY...........................................................................................198
		29.1 BEFORE THE PERIOD OF INACTIVITY.................................................................................198
		29.2 AFTER THE PERIOD OF INACTIVITY..................................................................................198
AUTHORIZED OPTIONAL EQUIPMENT................................................................................................200
	30. AUTHORIZED OPTIONAL EQUIPMENT........................................................................................201
		30.1 PRECAUTIONS REGARDING SAFETY....................................................................................201
		30.2 CHARACTERISTICS OF THE OPTIONAL EQUIPMENT FOR MODEL WB140-2.....................................................202
		30.3 CHARACTERISTICS OF THE OPTIONAL EQUIPMENT FOR MODEL WB150-2.....................................................203
	31. FRONT EQUIPMENT RAPID COUPLING DEVICES...............................................................................204
		31.1 MANUAL CONTROL RAPID COUPLING...................................................................................204
		31.2 HYDRAULIC CONTROL RAPID COUPLING FOR STANDARD BUCKET............................................................205
		31.3 HYDRAULIC CONTROL RAPID COUPLING FOR MULTIPURPOSE BUCKET AND OPTIONAL EQUIPMENT WITH UNIDIRECTIONAL OIL FLOW....205
	32. MULTIPURPOSE BUCKET .................................................................................................206
		32.1 DESCRIPTION AND CONTROLS........................................................................................206
		32.2 SAFETY DEVICES..................................................................................................206
		32.3 INSTALLING THE MULTIPURPOSE BUCKET..............................................................................207
		32.4 USING THE MULTIPURPOSE BUCKET...................................................................................208
		32.5 MAINTENANCE.....................................................................................................208
	33. PALLET FORKS.........................................................................................................209
		33.1 DESCRIPTION.....................................................................................................209
		33.2 SAFETY DEVICES..................................................................................................209
		33.3 USING THE FORKS.................................................................................................209
			33.3.1 PREPARING THE PALLET FORKS FOR USE........................................................................210
			33.3.2 OVERTURNING THE FORKS FOR TRAVEL ON ROADS.................................................................210
		33.4  REMOVING THE FORKS.............................................................................................211
		33.5 INSTALLING THE FORKS............................................................................................211
		33.6 MAINTENANCE.....................................................................................................211
	34. BACKHOE TELESCOPIC ARM...............................................................................................212
		34.1 DESCRIPTION AND CONTROL.........................................................................................212
		34.2 SAFETY DEVICES..................................................................................................212
		34.3 USING THE TELESCOPIC ARM........................................................................................213
		34.4 MAINTENANCE.....................................................................................................213
			34.4.1 ADJUSTING THE GUIDE SLACK.................................................................................213
	35. ARRANGEMENT FOR THE INSTALLATION OF THE DEMOLITION HAMMER............................................................215
		35.1 DESCRIPTION AND CONTROL.........................................................................................215
		35.2 USE OF THE DEMOLITION HAMMER AND RULES TO BE OBSERVED...........................................................216
		35.3 INSTALLING AND REMOVING THE DEMOLITION HAMMER...................................................................220
			35.3.1 INSTALLING THE HAMMER.....................................................................................220
			35.3.2 REMOVING THE HAMMER.......................................................................................222
		35.4 MAINTENANCE.....................................................................................................222
	36. ARRANGEMENT FOR THE OPERATION OF OPERATIONAL EQUIPMENT WIHT UNIDIRECTIONAL OIL FLOW..................................223
		36.1 DESCRIPTION AND CONTROL.........................................................................................223
		36.2 INSTALLING AND CONNECTING THE EQUIPMENT.........................................................................223
		36.3 MAINTENANCE.....................................................................................................224
	37. ARRANGEMENT FOR THE INSTALLATION OF THE CLAMSHELL BUCKET.............................................................225
		37.1 DESCRIPTION AND CONTROL.........................................................................................225
		37.2 INSTALLING THE CLAMSHELL BUCKET.................................................................................226
		37.3 USING THE CLAMSHELL BUCKET......................................................................................227
		37.4 MAINTENANCE.....................................................................................................227
	38. ARRANGEMENT FOR THE INSTALLATION OF THE MANUAL HYDRAULIC HAMMER......................................................228
		38.1 DESCRIPTION AND CONTROL.........................................................................................228
		38.2 CONNECTING AND REMOVING THE HAMMER..............................................................................229
			38.2.1 CONNECTING THE HAMMER.....................................................................................229
			38.2.2 REMOVING THE CONNECTIONS..................................................................................229
		38.3 USING THE HAMMER................................................................................................230
		38.4 MAINTENANCE.....................................................................................................230
	39. LOAD STABILIZER SYSTEM (LSS) (OPTIONAL)..............................................................................231
		39.1 ACCUMULATION OF THE LOAD STABILIZER SYSTEM (LSS)................................................................231
	40. AIR CONDITIONER (OPTIONAL)...........................................................................................232

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer