Konecranes SMV SL 45-1200 B G5 Spare Parts Catalogue M7051-12217 – PDF Download

Description

The Konecranes SMV SL 45-1200 B G5 Spare Parts Catalogue M7051-12217 is the complete illustrated parts reference for this heavy-duty container handler, covering every major assembly from the frame and counterweight through to the Cummins QSM11-C engine, Dana transmission, hydraulic system, electrical equipment, cab, lifting mast, carriage, fork and spreader. Each section is built around exploded-view drawings whose position numbers key directly to part number tables, so identifying a component and ordering the correct replacement is a direct lookup rather than a guess. The catalogue is laid out in the standard SMV group system, and the Konecranes SMV SL 45-1200 B G5 parts catalogue is the reference document you keep on the workshop computer, not a generic cross-reference book that only vaguely matches the machine.

File Details

• Manual type: Illustrated spare parts catalogue
• Brand: Konecranes / SMV
• Model: SMV SL 45-1200 B G/5
• Document number: M7051-12217
• Date: 2007-11-05
• Language: English and Swedish (ordering instructions also given in German, French, Spanish and Italian)
• Format: PDF
• Pages: Approximately 512

Chapters Covered

The Konecranes SMV SL 45-1200 B G5 parts catalogue is split into numbered groups, each with its own index, exploded illustration and parts table:

• Group 1 – Machine card / Using the catalogue: identification and how the catalogue is structured
• Group 2 – Frame – Body: counterweight, hood, cover plates, sound absorption kit, observation mirrors, tilt indicator mount, signs and stickers
• Group 3 – Steering shaft: steering axle assembly SC45 TA/CA for SL28-52, wheel details SL32-52 SC, wheel nut protection, steering cylinder
• Group 4 – Drive train: compressor, cooling system, air cleaner, exhaust system, engine Cummins QSM11-C Step 3 (cylinder block, cylinder liner kit, piston cooling nozzles, crankshaft, main bearings, connecting rods, pistons, gear housing, camshaft, idler gears, cylinder head, rocker levers, engine brake control, fuel pump and coupling, engine control module, flywheel housing, flywheel, front engine support, lifting brackets, alternator and drive pulley, starting motor, electrical accessories, maintenance parts), gearbox Dana 15.5TE27418-17 (housing, transmission case, turbine shaft, drive gear, pump drive, clutch shafts fwd/rev/2nd/3rd/4th, output shaft, regulator and control valves, filter), drive shaft PRC 7534 W4H 201 614 (carrier, housing, shaft and hub, wet disc brake, brake)
• Group 5 – Hydraulic equipment: hydraulic accumulator mount, lifting interrupt, hydraulic pumps and valves, hydraulic drive shaft details, hydraulic steering, hydraulic operating assembly, hydraulic tank and return with oil cooler, load signal mount, return filter, charge valve block, oil cooler
• Group 6 – Electrical equipment: relay interval assemblies, flash light, battery box, dashboard display, Cummins QSM11 / TE27-32 cable harness kit, park brake and emergency stop, cab/chassis wiring and light shifting sensor, supplementary cables, mast lighting, automatic fuses, gear lever, gantry manoeuvre panel, dashboard assembly, switches and symbols, power supply harness, distribution box, JPT / Deutsch / Harting connectors
• Group 7 – Cab: radio/CD, foot throttle, cabin door left, cab panes, driver’s seat, cabin SL10-52 SC corner posts, cabin interior, hydraulic board, roof grille, washer panes, cab heating system with AC, AC panel, condenser, steering spindle, heating coil
• Group 8 – Lifting system: mast GD SL 37-45 G5, hose tension, load indicator, support rollers, mast wheels, chain wheels, lifting cylinder, tilt cylinder, shaft pivots
• Group 11 – Spreader: integrated gantry spreader, gantry 750, spreader 818, main frame, wear pads, pendular twistlocks, slew/reach cylinder, extension cylinder, sideshift cylinder, extension valve, valve assembly, electrical parts, working lights, end beam sensors, hose clamps, pins, hangers
• Group 12 – Extra equipment: options for M7051-12217
• Group 15 – Index: master part number index across all groups

Read together, these groups give a technician the full parts structure of the SL 45-1200 B G5. The exploded drawings show how components sit on the machine, and the accompanying tables list part number, quantity and description for each position. Assemblies that consist of several parts are shown with the sub-parts inset beneath them, so a buyer can choose between the complete assembly or an individual internal component without hunting through other pages.

What This Konecranes SMV SL 45-1200 B G5 Parts Catalogue Lets You Do

This is not a workshop manual and it does not contain repair procedures, torque values or diagnostic flow charts. What the Konecranes SMV SL 45-1200 B G5 spare parts catalogue does give you is the definitive part numbering for the machine, which matters more than most owners realise until the wrong part shows up on site and the lift is down for another week.

• Look up the exact part number for a component before you call the dealer, the aftermarket supplier or the parts desk.
• Confirm that a part is common across several positions on the machine, so you can order one number instead of three.
• Identify which internal components sit inside a larger assembly when the assembly is not being replaced as a whole.
• Match the correct variant on your machine using the serial and option references printed against the affected positions.
• Check the quantity required per position so you order the right number of fasteners, washers, seals or clips, not an approximate figure.
• Understand the layout of the Cummins QSM11-C Step 3 engine, the Dana 15.5TE27418-17 gearbox and the drive shaft assembly when ordering engine, transmission or axle parts.
• Identify parts on the hydraulic system, electrical harnesses, cab fittings, mast, carriage, fork and spreader using the group indexes and exploded views.
• Cross-check a part number you already have against the drawing it appears on, rather than trusting an old label or a hand-written note.

How the Catalogue Is Organised

The document opens with the group contents page and a short explanation of how exploded views, position numbers, quantity columns and part number columns fit together. Each group that follows begins with its own index of sections, then presents the picture page first and the corresponding parts tables on the pages that follow. Position numbers in a rectangle indicate a complete assembly; position numbers in a circle indicate that the part itself is made up of several components, which are listed inset underneath. This is the standard SMV system and it means the Konecranes SMV SL 45-1200 B G5 parts catalogue is consistent with the rest of the SMV spare parts range, so anyone who has used an SMV catalogue before will find the layout familiar.

Who This Parts Catalogue Is For

The Konecranes SMV SL 45-1200 B G5 is a heavy reach stacker working in container handling, ports, terminals and industrial yards. That means downtime is expensive and part availability matters. This catalogue is written for the people who keep that machine running: fleet maintenance departments, independent heavy equipment mechanics, service technicians, parts managers and owners who order their own spares rather than running everything through a dealer. The Konecranes SMV SL 45-1200 B G5 spare parts catalogue is equally useful when you are building a stock list of common wear items, when you are chasing a single obscure fastener, or when you need to verify that a superseded number still refers to the correct part on your machine.

Document Details Worth Noting

• The document covers the SL 45-1200 B G/5 variant, not the entire SMV range, so the part numbers you find are specific to this machine.
• The engine section is built around the Cummins QSM11-C Step 3, and the drive train section references the build code QSM11C+T3+TE27418-4+PRC7534, which tells you exactly which engine, gearbox and drive shaft combination is covered.
• The steering section is written for the SC45 TA/CA axle as fitted to SL28-52 machines, so there is useful overlap if you also work on nearby SMV models.
• The spreader section includes the integrated gantry spreader with gantry 750 and spreader 818, along with the pendular twistlock assembly and its sensor brackets, so the lifting end of the machine is covered in the same document as the chassis.
• The master index at the back of the catalogue lists part numbers across all groups with their group and page reference, which is the fastest route when you already know the number you are looking for.

Why It Matters to Have the Right Numbers

Heavy lifting equipment does not tolerate guesswork. A wrong hydraulic seal, an incorrect bearing or an undersized fastener can turn a planned service into a second breakdown. The Konecranes SMV SL 45-1200 B G5 parts catalogue removes the ambiguity by pairing each position number with a single part number and a single description in two languages, so the number you write on the order is the number the supplier ships. It also gives you the surrounding information that matters when a machine has been in service for years and previous work has been done by different hands: which variant the part applies to, which assembly it belongs to, and how many are required.

IMAGES PREVIEW

Delivery is instant. The Konecranes SMV SL 45-1200 B G5 spare parts catalogue M7051-12217 arrives as a downloadable PDF the moment payment clears, with no shipping, no waiting on a courier and no printed copy to lose in the workshop. Open it on a laptop in the office, a tablet on the machine or a phone at the parts counter. Zoom in on an exploded view, print the one page you need for the job, and keep the rest of the catalogue intact. For anyone responsible for keeping a Konecranes SMV SL 45-1200 B G5 container handler working, this is the parts reference that removes the guesswork from ordering, and it is available to download right now.