Landini Rex 80 F-GE Tier 2 Parts Catalog 4207965M1 – Illustrated PDF

Description

Landini Rex 80 F-GE Tier 2 Parts Catalog – Document 4207965M1

This is the complete illustrated parts catalog for the Landini Rex 80 F/GE tractor in Tier 2 configuration, published under document number 4207965M1. Whether you are ordering replacement components, identifying a part number from an exploded view, or rebuilding a major assembly, this catalog provides the parts breakdowns and illustrations needed to get the right component the first time.

The catalog is written in English and covers the full machine – from the Perkins engine through the transmission, hydraulics, axles, cab, and every bracket, pipe and fitting in between. Each section uses exploded illustrations with numbered callouts that link directly to part numbers, descriptions and quantities, so you can trace exactly what goes where.

File Details

• Manual Type: Parts Catalog
• Brand: Landini
• Model: Rex 80 F/GE (Rex Tier 2 fp/cab)
• Document Number: 4207965M1
• Language: English
• Page Count: 391
• File Format: PDF

Chapters Covered

• Accessories and Application Miscellaneous
• Engine
• Fenders, Footsteps and Platform
• Front Axle and Steering
• Hydraulics and Linkage
• Lighting Equipment
• Rear Axle
• Transmission
• Tractor Cab
• Accessories Mechanical

Engine

The engine chapter is the largest in the catalog and breaks the Perkins DD81438 power unit down into every serviceable assembly. You get dedicated exploded views for the engine assembly, short engine, cylinder block, crankshaft with pistons and connecting rods, cylinder head, rocker shaft, timing gear and camshaft, oil pump, fuel injection equipment, lubricating oil sump, oil filler and breather, heat exchanger and oil filter, water pump and thermostat, exhaust manifold, aspiration pump, turbocharger, fuel pipings, and the engine maintenance kit. Ancillary equipment is also covered – alternator and its positioner, starter motor, cooling system and radiator brackets, dual-element dry air filter, fuel tank, horizontal exhaust system, hand and foot throttle controls, oil temperature sensor, and the engine block heater.

Transmission

The transmission section documents the driveline in full detail. It includes the dual clutch and clutch pedal linkage, lower P.T.O. clutch, front centre housing and drive shaft, transmission case and clutch box, output shaft, countershaft, synchro transmission variants, shift levers with rods and yokes, reducer control options including the 5.3:1 reduction ratio, transmission housing and cover, mechanical manual shuttle control, P.T.O. control for hand mechanical and 540/750/1000 R.P.M. selectors, transfer gear box and drive shaft for both two- and four-wheel drive, creeper gearbox control, P.T.O. shaft guards, and the motor axle gearbox.

Front Axle and Steering

Both two-wheel drive and four-wheel drive front axle configurations are documented. The chapter covers front wheels, hoops and tyres, axle support, steering hydraulic lines, the steering orbitrol unit in both Danfoss and Rexroth versions for 2WD and 4WD, front axle housing and supports, differential assemblies, the steering cylinder, steering wheel and column, and front fenders. Each steering orbitrol unit is exploded into its body, valve, bearing, bush, pin, shaft, driving gear, plate, cap, washers, screws, balls and seals.

Rear Axle

The rear axle chapter covers the differential, differential lock controls in hydraulic form, rear axle housing and wheel hub, brake and control pedals including the hydraulic control device, handbrake assemblies, rear and front brake pipings, brake cylinder, rear wheels with hoops and tyres, and trailer brake pipes and fittings. Exploded diagrams show every seal, bearing, shim and fastener used in the axle and brake assemblies.

Hydraulics and Linkage

This is a comprehensive hydraulics section covering the pipings and pump, the double-body hydraulic pump by Bosch, heat exchanger circuits, the hydraulic equipment valve, lift arms with mechanical riser, mechanical control lift for draft, position and intermix, auxiliary hydraulic valve lines, hydraulic lift valve with sensing distribution device, and the complete auxiliary distributor range – standard, floating, and kick-out. Linkage coverage includes the strut and linkage standard version, three-point linkage 2 CAT with ball-type fix, and the quick attach variant. Control levers, rods, yokes and the auxiliary hydraulic control valves for 1.0 and 2.0 distributors are all diagrammed.

Lighting and Electrical Equipment

The electrical chapter starts with the battery and its support and fastening, then covers rear lights, instrument panel equipment, rear and front electrical wiring, front light lines, instrument panel lines, rotating lights for platform and cab, lighting equipment for platform and cab, cab roof electrical lines, and the N.A.O. wiring line. Wiring harnesses, switches, relays, fuses, lamps and connectors are all listed with their part numbers.

Tractor Cab

The cab section documents the complete cab assembly including the mirror kit, roof and cladding panels, windscreen, doors, rear windows, air conditioner compressor and condenser, cab heater kit, insulation and cladding, visor and curtains kit, cab panels, cab supports, windscreen wiper, and the various driver seat options with mechanical suspension. Each cab sub-assembly is exploded to show handles, hinges, locks, gaskets, glass and fasteners.

Fenders, Footsteps and Platform

Platform, fenders, footsteps and related bodywork are grouped here. The chapter covers the platform itself, instrument panel, safety frame, fender extensions, insulation and cladding, decals in multiple positions, the driver seat with mechanical suspension, tool box, soundproofing kit, and the side cover and fan shield.

Front Sheet Metal

The front sheet metal chapter covers the hood and bonnet support, hinges, gas springs, grilles, skirts, front panels, nameplates, locks, and all associated clips, pads and rivets. Decal sets for the hood and body are also documented.

Accessories and Application Miscellaneous

This section covers the auxiliary distributor kit for the second distributor, creeper gearbox kit and control, mechanical weight frame and front weights, front hook, CUNA CAT A drawbar, rear hook pull, rear hook pull support, lever with trailer braking, traverse drawbar, warning beacon with triangle and licence plate, and the tool kit and fittings.

Why This Parts Catalog Matters

Ordering the wrong part for a Landini Rex 80 wastes time and money. This catalog removes the guesswork. Every exploded view ties a visible component to a specific part number, quantity and description, so you can confirm the exact component before you place an order. Whether you are replacing a seal in the steering orbitrol, sourcing a hydraulic lift valve, identifying the correct synchro gear for the transmission, or tracking down a cab hinge, the illustration and parts list give you the reference you need.

The catalog also includes a full numerical index at the back, letting you look up a part number and jump straight to the page and reference where it appears. This is invaluable when you already have a part number from a dealer quote or an old invoice and want to confirm what it is and where it fits.

IMAGES PREVIEW

Instant PDF Delivery

This Landini Rex 80 F-GE Tier 2 parts catalog is delivered as an instant PDF download. There is no shipping, no waiting for a disc, and no customs delays. The file works on any device – desktop, laptop, tablet or smartphone – and you can print individual pages or entire sections for use in the workshop. Keep it on your phone for quick reference at the machine, or print the exploded views you need for the job at hand.

If you maintain, repair or restore a Landini Rex 80 F/GE, this parts catalog is the reference that keeps your parts ordering accurate and your machine running.