Liebherr LTM 1030-2 Telescopic Boom Mobile Crane Operating Instructions Manual PDF

Description

The Liebherr LTM 1030-2 Telescopic Boom Mobile Crane Operating Instructions manual is the complete, factory-issued operating guide for the LTM 1030/2 and LTM 1030-2-006 mobile cranes. Published under document number BAL 10407-01-02 and spanning 521 pages, this manual covers everything from initial pre-startup checks and chassis operation to superstructure control, LICCON safe load indicator programming, cable reeving, counterweight installation, folding jib setup, and scheduled maintenance intervals. Whether you are operating the crane, performing routine servicing, or configuring the LICCON system for a specific lift, this operating instructions manual provides the procedures, specifications, and safety guidelines needed to work with the LTM 1030-2 correctly.

File Details

• Manual Type: Operating Instructions
• Brand: Liebherr
• Model: LTM 1030/2, LTM 1030-2-006
• Document Number: BAL 10407-01-02
• Language: English
• Page Count: 521 pages
• File Format: PDF

Chapters Covered

• Chapter 1 — Description of the Crane: Terminology, boom system abbreviations (T and TK), product description of chassis and superstructure, technical data, dimensions, tire specifications, axle loads, speeds, and load tackle data.
• Chapter 2 — Safety: Road traffic regulations, running-in instructions, operational planning, safety-technical notes covering crane operator requirements, site selection, slopes and trenches, permissible ground-bearing load, supporting the crane, crane operation with a load, auxiliary power supply, working near transmitters, hand signals for guides, and wind conditions.
• Chapter 3 — Operation of the Chassis: Controls and instruments, pre-startup checks, driver’s cab adjustments, axle suspension and axle locking system, driving on public roads, off-road driving, hydraulic rear axle steering, and job site procedures including changing from driving to crane operation and supporting the crane from the chassis.
• Chapter 4 — Operation of the Superstructure: Controls and instruments, LICCON control and indicator unit, booting the LICCON system, SET UP program (equipment configuration), OPERATION program (crane operation view), Support program, starting the crane, safety devices, crane operation, cable reeving, counterweight combinations and installation, working with a load, driving with the attachment in place, driving from the crane operator’s cab, and crane operation free standing.
• Chapter 5 — Equipment: Safety-technical notes and folding jib TK variations including single 8.6 m and double 15.0 m configurations, installation, hoist cable reeving, angle adjustment from 0° to 20°/40°, electrical connections, erection, and removal.
• Chapter 6 — Additional Equipment: Heater and engine preheat system for the driver’s cab and crane operator’s cab, air conditioning system, and emergency crane control for chassis and superstructure.
• Chapter 7 — Service and Maintenance: Servicing and maintenance procedures, maintenance intervals for crane chassis and superstructure, maintenance guidelines for the crane vehicle and superstructure, lubrication chart, filling capacities, and the Schmierstofftabelle (approved lubricants table).
• Chapter 8 — Crane Inspections: Repeat crane inspections, inspection guidelines, inspection of crane cables with discard criteria, and inspection of the pneumatic brake system.
• Chapter 9 — General Notes: Code of practice for overload safety devices of boom cranes and guidelines to prevent fires in the engine area with important service work.

Beyond the chapter list, this Liebherr LTM 1030-2 operating instructions manual delivers the complete operating logic of the crane. Chapter 4 alone spans well over a hundred pages covering the LICCON safe load indicator system in exceptional detail — the SET UP program for entering equipment configurations and hoist cable reeving, the OPERATION program with its crane geometry and load displays, alarm functions, special functions, and monitored additional functions. The manual explains how to set the operating mode and equipment configuration before every lift, how to interpret the prewarning and STOP symbols, and how to respond to overload conditions. It also walks through the Support program for controlling the outrigger system from the crane operator’s cab via the LICCON monitor.

The safety chapter is equally thorough, covering practical topics that matter on every job site: selecting an operating site, calculating safe distances from slopes and trenches, determining permissible ground-bearing load for different soil types, properly supporting the crane with all four sliding arms extended, and observing wind conditions using the Beaufort scale table. The manual also includes a full set of hand signals for guides and detailed procedures for working near overhead electrical wires and transmitters.

For maintenance planning, Chapter 7 provides separate maintenance interval schedules for the crane chassis and the crane superstructure, listing daily, weekly, and interval-based tasks with hour and kilometer thresholds. The lubrication chart and filling capacities table give the exact fluid quantities for the engine, transmission, axles, hydraulic tank, slewing gear, hoist gear, and central lubrication system. The Schmierstofftabelle lists approved lubricants for every application on the crane, with ambient temperature ranges and LIEBHERR identification numbers.

Chapter 8 covers repeat crane inspections in depth, including the calculation of theoretical service life for winches, the classification of load collectives, and the documentation required in the crane inspection booklet. The cable inspection chapter provides discard criteria based on broken wire counts for each cable type and diameter on the LTM 1030-2, along with procedures for handling torsion in hoist cables.

Who This Manual Is For

This operating instructions manual is written for crane operators, maintenance technicians, and service personnel working with the Liebherr LTM 1030-2. It assumes the reader is qualified and trained to work on this crane, as stated in the manual’s own safety notes. The procedures are detailed enough to support both routine operation and more complex tasks like folding jib installation, counterweight ballasting, and LICCON equipment configuration changes. Maintenance personnel will find the interval schedules, lubrication specifications, and inspection criteria directly applicable to keeping the crane in safe working condition.

Why the Liebherr LTM 1030-2 Operating Instructions Manual Matters

Operating a telescopic boom mobile crane like the LTM 1030-2 involves far more than moving levers. The LICCON safe load indicator must be set correctly for each equipment configuration before lifting, the outrigger support must match the load capacity chart, the counterweight combination must correspond to the planned lift, and the folding jib angle must be configured correctly for the job. This manual provides the exact procedures and specifications for all of these tasks. It also documents the safety devices — hoist limit switches, pressure switches, load moment limiter, and emergency controls — that protect the crane and everyone around it. Without the correct operating instructions, there is a real risk of overloading the crane, toppling it, or causing an accident. The manual gives operators the information they need to work safely and within the crane’s limits.

Get Instant Access

The Liebherr LTM 1030-2 Telescopic Boom Mobile Crane Operating Instructions manual is delivered as a PDF download immediately after purchase. There is no shipping, no waiting, and no physical book to keep track of. The PDF can be viewed on any device — laptop, tablet, or smartphone — and printed pages can be taken to the job site or into the workshop. Whether you need to look up a LICCON error code, check a maintenance interval, review the counterweight combinations, or study the cable reeving plans, this 521-page PDF puts the complete operating instructions for the LTM 1030/2 at your fingertips.

IMAGES PREVIEW