Liebherr TCC-CBG 25(30)/30(28) LIT Spare Parts Catalog – Serial 165178 – English/German PDF

Description

Liebherr TCC-CBG 25(30)/30(28) LIT Spare Parts Catalog – Serial 165178

Liebherr printed this spare parts catalog for one exact machine: the TCC-CBG 25(30)/30(28) LIT, serial number 165 178. Every assembly on that crane – from the base structure and slew bearing up through the hydraulic piping, the boom head, the cabin and the electrical cabinet – is broken down into position-numbered exploded views backed by parts tables carrying original Liebherr item numbers. Document number 165178_ETK_001 with assembly item number 01 65 178 14 identifies the correct edition for this serial, so there is no ambiguity about which parts sheet matches the machine in front of you.

File Details

• Manual type: Illustrated spare parts catalog
• Brand: Liebherr
• Model: TCC-CBG 25(30)/30(28) LIT
• Serial number: 165 178
• Document number: 165178_ETK_001
• Assembly item number: 01 65 178 14
• Print date: 8.2.2017
• Language: English and German (bilingual)
• Format: PDF
• Pages: 360

Assemblies and Systems Covered

The catalog opens with the machine’s assembly listing across three sheets, then works through each group in turn. Sections included are:

• BC CPL and BC St.Const. CPL (base structure)
• Sump pan CPL
• Crane add-on
• Doors installation
• Clinometer CPL RFK (inclination indicator)
• SC CPL and SC attachment
• Platform and access RFK
• Lubrication RFK for the slew bearing
• Load recorder EL RFK
• Wind transmitter installation
• Transport means
• Cabin installation CPL
• Air conditioning unit CPL RFK
• Drive unit CPL
• Slipring unit installation
• Boom CPL and boom head equipment
• Angle sensor installation CPL RFK
• Flood light halogen RFK and installation
• Boom access CPL
• Hoisting limitation RFK
• Tool CPL
• Video monitoring installation RFK
• Tank filling system
• Operating equipment
• Hoisting gear assembly CPL
• Hook beam
• Control hardware
• Software
• Modem RFK

Beneath those headings the parts tables reach into the components that actually fail and get swapped in service – the slewing gear drive with its output shaft housing, tapered roller bearings, planet wheels, sun wheels and multi-disc brake; the luffing cylinder with its piston rod, guide bushing, compact seals, V-rings and check valve; the SG safety block with its solenoid valve, check valves, seat and pressure spring; the block ball valve CPL; the distributor gearbox with spur wheels, profile hollow shafts, rotary shaft lip seals and lubricating oil pump; the driving gear and adjustment assemblies; the central power unit; the slip ring transmitter with its brush supports, copper rails and earth ring; the deflection pulley assemblies with rope pulleys, rope guards and force measuring axles; and the heavy lift rope winch CPL with its rope drum, planetary gear, drum bearing, winch frame, pressure roller for cable and oil-gauging instrument.

What Each Parts Sheet Gives You

Every sheet is laid out the way a Liebherr parts counter expects. The illustration carries position numbers; the table underneath lists Pos., the Liebherr Artikel (item/order number), Menge (quantity), the part designation in the original language (German), the translated designation (English) and a Serie column where a serial break applies. Notes below the quantity column point to subordinate items and page references, so a sub-assembly such as the slewing gear drive, the block ball valve CPL or the luffing cylinder can be traced straight through to its own dedicated sheet without leaving the catalog.

Hydraulic Schematics and Assembly Drawings

Running through the catalog alongside the parts tables are full system drawings that make the hydraulic side of the TCC-CBG 25(30)/30(28) LIT legible. The tubing hydraulics sections covering the luffing gear, the slew gear and the cooling circuit carry complete schematics with component callouts, so line routing, valve placement and connection points can be read at a glance rather than guessed at. Cross-section drawings of the distributor gearbox, the spring-loaded brake, the multi-disc brake, the drum bearing, the luffing cylinder and the central power unit show internal arrangement, sealing positions and fastening hardware – the level of detail that turns a rebuild into a straightforward sequence of disassembly steps rather than an experiment.

Finding the Right Part Fast

Two indexes at the back of the catalog do the heavy lifting. The numerical index is sorted by item number and references the page, assembly, position and quantity. The alphabetical index is sorted by part designation and references item number, position, quantity, page number, assembly and the assembly designation where the part appears. Between them, a technician holding a Liebherr item number can jump straight to the sheet, and a technician who only knows the part name can find its number in the other direction. Because Liebherr prints these catalogs against a specific serial, checking the item number on the machine’s type plate against this catalog before ordering is the documented step that keeps the order correct.

Order the Liebherr TCC-CBG 25(30)/30(28) LIT Spare Parts Catalog

With this catalog open, the TCC-CBG 25(30)/30(28) LIT becomes a machine you can keep running. You can identify and order any listed spare part, confirm the correct quantity before it ships, and check serial-break information so the part that arrives matches the part on your crane. Rebuilds of the slewing gear drive, the luffing cylinder, the block ball valve and the SG safety block all reference the same exploded views a Liebherr parts desk works from.

Delivery is instant. The PDF lands in your account the moment payment clears – no shipping, no waiting on a printed binder, no restriction to a single office machine. Read it on a laptop, tablet or phone at the worksite, print the sheets you need for the workshop, and keep the numerical and alphabetical indexes at hand for the next parts order.

IMAGES PREVIEW