Linde E10 E12 E14 E16 E20 E25 Series 1120-01 Spare Parts Catalogue 11208010000 – Full PDF Parts Manual for R10 R12 R14 R16 R20 R25 Forklifts

Description

Linde E10 E12 E14 E16 E20 E25 Series 1120-01 Spare Parts Catalogue – Document 11208010000

This is the full Linde E10 E12 E14 E16 E20 E25 Series 1120-01 Spare Parts Catalogue, issued under document number 11208010000. It is the complete parts reference for the Linde electric forklift range built on the 1120-01 platform and covers the truck designations R10, R12, R14, R16, R20 and R25 in their standard, options, DMC, G-variant, cold-store and cabin configurations. Every assembly, sub-assembly and fastener used across these machines is documented here with exploded diagrams, itemised part numbers, quantities and the validity notes that tell you exactly which variant each part belongs to.

At more than 1,500 pages, this is not a summary or a top-level parts list. It is a full teardown of the truck, from the traction motor through the transmission and chassis, up through the operator controls, electrical system and hydraulic unit, and out to the lift mast, reach carriage and fork carriage. If a component is bolted, pinned, hosed, wired or sealed onto a Linde 1120-01 truck, the exploded view and the part table for it are in this catalogue.

File Details

• Manual type: Spare Parts Catalogue
• Brand: Linde
• Series: 1120-01
• Models covered: E10, E12, E14, E16, E20, E25 – truck designations R10, R12, R14, R16, R20, R25
• Document number: 11208010000 (1120 801 00 00)
• Languages: English, German, French, Italian, Spanish, Chinese
• Page count: approximately 1,561 pages
• File format: PDF
• Publication date shown on pages: 28.02.2019

Chapters Covered

• POWER UNIT: ENGINE/MOTOR
• DRIVE: TRANSMISSION
• CHASSIS UNIT
• STEERING AND WHEELS
• CONTROLS
• ELECTRIC EQUIPMENT
• HYDRAULIC UNIT
• LIFT MAST
• SPECIAL EQUIPMENT
• MISCELLANEOUS

Power Unit: Engine/Motor

The traction motor chapter documents the standard and forced-ventilation motor assemblies for the 1120-01 range. It covers the rotor, armature, grooved ball bearings, seals, transmitter wheel, temperature sensor, terminal board, flange and mounting hardware with their part numbers and validity notes for standard, Basic and DMC trucks. Exploded views let you identify each stage of the motor build up to the flange.

Drive: Transmission

This is the mechanical heart of the catalogue. It contains the axle-driven gear, wheel drive, wheel hub and wheel bearing assemblies, tapered roller bearings, sealing rings, screw plugs, lock rings and the cover plates that close each end. Separate sections cover the drive unit variants – DMC, G, and SE – with their plates, brackets, motor supports, spring elements and bearing blocks. Load wheel hubs, drive wheels and solid tyres are all broken down to individual components.

Chassis Unit

The chassis chapter spans the full lower frame of the truck. It documents the main chassis assemblies in the 1140 mm, 12270 mm / 1270 mm and 1470 / 1670 mm wide-version widths, the fender assemblies, guard plates, wheel guards, overhead guard mounts and the many socket-head and hexagon-head fasteners that hold the body together. Battery support assemblies are covered for 3PzS through 6PzS, with and without support rollers, and in DMC and Li-Ion variants. Battery carriers, wear strips, rollers, stops, tension springs and the release mechanisms are all itemised. Side guidance components, joining plates, shims and sealing plugs finish out the chassis section.

Steering and Wheels

Steering is documented in two variants – the standard steering unit and the G version – with pinion gears, parallel keys, washers, hexagon screws and the adhesive label. The electric steering chapter covers the steering wheel, woodruff key, hexagon nut, washer and electronic module. Under steering and wheels you will also find the drive wheel and tyre assemblies, load wheels, wheel hubs with tapered roller bearings, slotted nuts and locking plates, plus the solid tyre and disc wheel assemblies for R14G, R16G, R20G and other variants. Every wheel screw, wheel hub cap, sealing ring and earth cable is listed with its quantity.

Controls

The controls chapter covers pedal operation, the operator’s console and the actuator of the pilot valve. The pedal section breaks down the bottom plate assemblies for single and dual pedal trucks, accelerator and brake pedal assemblies, pedal covers, potentiometers, microswitches, compression and tension springs, needle bearings and the guide rails. The operator’s console section documents the armrest, console base covers, brackets, levers, gas springs, spacer plates, bearing blocks, Bowden cables and the multi-way pin and socket housings that carry the control signals.

Electric Equipment

This is one of the largest sections. It covers the electric armatures (horn, electronic control units, key switch, emergency-off switch, toggle switches, displays, signal transmitters), central electrical system and controllers for standard, G and DMC trucks, electric and controller packages for special equipment including cabin variants, wiring harnesses for special equipment, output modules, battery accessories, main harnesses in part 1 and part 2, main harness for DMC, wiring harnesses for the reach carriage, various cable looms, armrest wiring harnesses, cold-store and weather-protection cab harnesses, flashing beacon and identification light wiring, rotating beacon and working spotlight wiring, truck spot wiring, VertiLight wiring for both Typ 1501 and Typ 1502, LFM (Linde Forklift Data Management), data transmission for Connect / LFM-Online, 12 V and USB sockets, cold-store attachments, and a full set of connectors, contacts, seals, blind plugs and cable ties with part numbers.

Hydraulic Unit

The hydraulic unit chapter documents the oil tank and its filter, breather, dipstick, hose lines and mounting hardware; the basic hydraulics including connectors, clamping pieces, hose lines for each mast type (1500, 1501, 1502) and the DMC basic hydraulic variant; the lift pump and motor in 14 kW and 13 kW versions with their armatures, gears, bearings, seals, gear pumps, flanged branches and suction hoses; the control valve with its non-return valves, high-pressure relief valves, throttle valves, solenoid coils, magnet-operated switches and full set of seals; and the working hydraulics for standard, triplex 1501 and triplex 1502 lift masts including all double hose assemblies indexed by lift height, hose guides, wear strips, supports and the pressure sensor for load weight display.

Lift Mast

The lift mast section is extensive. It contains the standard mast type 1500 outer, inner and middle assemblies indexed by lift height, the triplex mast types 1500, 1501 and 1502 with their respective outer, middle and inner assemblies, the support rollers, shim rings, guide rails, wear strips, chain anchors, chain supports, chain pins, split pins and the full chain tables for leaf chains by lift height. Lift cylinders are documented for the standard mast 1500, the middle and external cylinders for triplex 1500, and the lift cylinders for 1501 and 1502 – each with seal kits, cylinder heads, pistons, snap rings, guide rings, wiper rings and line-break safety valves. Reach cylinders for 1500 and for 1501 / 1502 are covered together with their lines. The fork carriage chapters for types 1500, 1501 and 1502 include the fork carriage assemblies, lift carriage assemblies, cylinder assemblies, tilt cylinders, sideshift cylinders, guides, stops, retainer plates, angle plates, pipe assemblies and seal kits.

Special Equipment

Special equipment covers the overhead guard (including scanner, panoramic mirror, clipboard, document holder, data terminal and cabin support brackets), the load backrest for types 1500 and 1501 / 1502 in heights from 830 mm to 1800 mm, and the battery stand for two- and three-battery configurations with support rollers, pipes, rods, bearings and lock rings.

Miscellaneous

The miscellaneous chapter rounds out the catalogue with the plates and decals – nameplates, capacity rating plates, warning labels, cold-store labels, Li-Ion labels, joystick function labels, battery and voltage labels – plus the operating materials such as spray paints, chain spray, lubricating greases and cold-store specification greases.

What This Spare Parts Catalogue Lets You Do

With this PDF on hand you can identify the exact part number for any component on a Linde E10, E12, E14, E16, E20 or E25 series 1120-01 truck without guesswork. That includes the smaller pieces that generic parts lookups almost never resolve: the specific shim thickness behind a support roller, the correct locking ring for a given hub, the right length of double hose assembly for a 7,260 mm lift, the correct socket housing and seal for a particular harness branch, or the number of spring washers under a specific cover. Every exploded diagram is paired with a numbered part table that includes the part number, quantity and — crucially — the validity note that tells you whether the part fits a standard truck, an options build, a DMC machine, a G-variant or a cold-store truck.

For workshops, this means fewer wrong parts ordered, fewer returns and faster turnaround on every job. For fleet operators, it means you can quote, plan and schedule repairs from a single reference instead of chasing multiple sub-assembly lists. For rebuilders and restorers, it means the full parts breakdown is available at the component level, so nothing is left to inference.

Instant PDF – No Shipping, No Waiting

The catalogue is delivered as a PDF file the moment your order is confirmed. There is nothing to ship and nothing to wait for. The file opens on any device — desktop, laptop, tablet or phone — and can be printed in whole or in part, so you can keep the pages for the system you are working on next to the machine and leave the rest in the file. If you maintain more than one Linde electric truck from the 1120-01 family, this single catalogue covers the entire range and every major assembly within it.

IMAGES PREVIEW