Linde E14 E16 E18 E20-02 Parts Catalogue 335 804 93 01 – Forklift Spare Parts Manual PDF

Description

Linde E14 E16 E18 E20-02 Parts Catalogue — Complete Spare Parts Reference

This 355-page Linde parts catalogue covers the complete E14, E16, E18 and E20-02 series of electric counterbalance forklifts. Published under document number 335 804 93 01 with a print date of 29 July 2005, it is the spare-parts reference that walks you through every register of the truck — from the drive motor and wheel drive, through the chassis and steering axle, to the mast assembly and auxiliary hydraulics. Every assembly is broken down into its component parts with exploded diagrams, Linde part numbers, designations, required quantities, and any applicable replacement or remark notes. When you need to identify a specific part for an E14, E16C, E16, E18C, E16P, E18P or E20P truck, this is the catalogue that matches the machine.

File Details

• Manual type: Parts Catalogue / Spare Parts List
• Brand: Linde
• Models covered: E14, E16C, E16, E18C, E16P, E18P, E20P
• Language: English
• Page count: 355
• File format: PDF
• Document number: 335 804 93 01
• Date: July 2005

How This Linde Parts Catalogue Is Organised

The catalogue is split into numbered registers, each one covering a major system of the truck. Within every register you will find illustrated breakdowns of the individual assemblies, followed by the part tables that list the item position, Linde part number, designation, required quantity and any replacement cross-references or remarks. This structure lets you locate a component by going to the system it belongs to, finding the exploded view, and reading the part number straight off the corresponding table entry. It is the fastest way to order the exact part you need without guesswork or a trip to the dealer.

Chapters Covered

• Register 01 — Drive Motor
• Register 02 — Drive Transmission (Wheel Drive)
• Register 03 — Chassis, Bodywork and Fittings
• Register 04 — Steering and Wheels
• Register 05 — Controls
• Register 06 — Electric Equipment
• Register 07 — Control Valve, Hydraulic Pump and Tilt Cylinder
• Register 08 — Mast Assembly and Auxiliary Hydraulics
• Register 09 — Special Equipments
• Register 10 — Miscellaneous

Register 01 — Drive Motor

Complete exploded breakdown of the traction motor assemblies for both left and right installation, including rotor, housing, brush holders, carbon brushes, temperature sensors, brake disc, and all associated bearings, seals, screws and terminals. Separate assemblies are listed for standard and Ex versions, with clear part numbering for each variant.

Register 02 — Drive Transmission

The wheel drive unit is documented in full: transmission housing, annular gear, tapered roller bearings, spacer rings, planet gear carriers, planet wheels, sun wheels, shim sets, seal rings, o-rings, and fastening hardware. Both complete drive unit assemblies and individual service units for the AE18-03 centre piece are itemised with their part numbers.

Register 03 — Chassis, Bodywork and Fittings

This register covers the structural and body components of the E14/E16/E18/E20-02 trucks: the main chassis assembly, overhead guard variants (standard, special equipment, roof-open versions), counterweights for each model, hoods and cover sheets, floor mats, driver’s seat assemblies with upholstery options, cabin components including roof and windscreen panes, sliding panes, hinges, handles and gas springs, plus the complete heater assembly with blower, thermostats, resistors and heating spiral.

Register 04 — Steering and Wheels

Two steering axle sections are provided — one for E14, E16C, E16 and E18C, and a second for E16P, E18P and E20P. Steering pivot pins, wheel hubs, bearings, seals, wheel nuts, tie rods, steering boxes, potentiometers, and hub caps are all listed. The hydrostatic steering section documents the steering control valve, steering column, hoses and lines, pipe unions and hollow screws. Wheels and tyres covers pneumatic, solid, anti-static and Vulkollan wheel assemblies, plus rims, tubes, rim bands and fenders.

Register 05 — Controls

Travel actuating and braking control includes the brake lever, handbrake lever, brake cylinder, brake cable pulls, accelerator pedal, brake pedal, pedal coverings, springs, and all mounting hardware. The actuator of pilot valve section documents the joystick assemblies (single, double, cross and 360-degree central lever versions), bellows, handles, armrests, console tops, and the pedal and switch components that feed the pilot valve.

Register 06 — Electric Equipment

The largest single register. It covers armatures, battery plugs and sockets, cables, the transformer, ignition switch, indicator units, contactors, fuses, traction and lift electronic control units, Linde Forklift Data Management (LFM) modules, main harnesses for each model variant (including serial-number breakpoints for E14 and E16C/E16P/E18C/E18P/E20P), cable sets, lighting, lighting higher, mirrors, spot lights, flashing lights and warning lights, cable trees, and the harness LFM. Full connector, housing, seal, bush, and contact part numbers are given for each harness section.

Register 07 — Control Valve, Hydraulic Pump and Tilt Cylinder

Split into three time-based revisions of the control valve and lines section (pre-09/98, 10/98 onward, and later). Includes 3-way and 4-way control valves, brake valves, valve cartridges, magnets, coils, accumulators, pipe unions, hoses and lines. The hydraulic pump, oil tank, filter and lines section lists the tank assembly, air-vent filter, suction filter, return filter, dipstick, formed hoses, gear pump, coupling, fan, and console supports. The pump motor section covers motor housing, rotor, brush holder, carbon brushes, bearings, seals and temperature sensors. The tilt cylinder section covers cylinder barrels, piston rods, pistons, cylinder heads, seal kits, eye bolts and mounting hardware.

Register 08 — Mast Assembly and Auxiliary Hydraulics

Standard, duplex and triplex Type 180 masts are each documented with lift heights from 2850 mm up to 6450 mm, listing outer, inner and central mast assemblies, fork carriages, fork arms (80×40, 80x40x800 up to 2000 mm; 100×45 for E18C/E18P/E20P), fork stops, chain pulleys, leaf chains, guide rails, wear strips, support rollers, and all associated bolts and shims. Lift cylinder for mast lift Type 180 covers cylinders from HH 2850 through HH 6450 with individual cylinder pipes, piston rods, piston barrels, seal kits and cylinder heads. Auxiliary hydraulics sections for standard, duplex and triplex masts list double hose lines, pipelines, clips, brackets and guides by lift height. Sideshifter sections for standard, duplex and triplex masts document the integrated sideshift assemblies, crossmembers, carriage forks, bolts, bushes, rollers, covers, o-rings and lubrication nipples.

Register 09 — Special Equipments

Highway equipment includes mirrors (standard and panoramic), bearing blocks, protective covers, wheel chocks, warning triangles, straps, number-plate lights and harness. Loadguard for mast Type 180 is also documented with the guard assemblies, bolts, washers and nuts.

Register 10 — Miscellaneous

Plates for the E14/16/18/20-02 range — name plates, warning labels, capacity labels, operating symbol labels for joystick and lever controls, and identification labels — are listed with their part numbers. Operating material covers spray cans (RAL2002 and RAL7021), chain lubricant spray (standard and cold-store spec), and lithium-based grease to DIN 51825.

Why This Linde E14 E16 E18 E20-02 Parts Catalogue Belongs in Your Workshop

Guessing at part numbers costs time, money and often a second order when the wrong item arrives. This catalogue removes that risk. With the exploded diagrams and part tables in front of you, you can identify exactly which component is fitted to your truck — whether you are servicing a single E14, rebuilding the transmission on an E16C, replacing the mast chains on an E18P, or overhauling the hydraulic pump on an E20P. The serial-number breakpoints in the electric equipment register are especially useful for ordering the correct main harness, and the model-specific steering axle sections ensure you get the right part for your chassis variant.

The catalogue supports the full range of jobs: routine part replacement, planned maintenance, accident repair, and complete rebuilds. Having the correct Linde part numbers, designations, quantities and replacement notes in one place means fewer phone calls, fewer returns, and faster turnaround on every truck in the fleet. Whether you are a workshop technician, a fleet maintenance planner, or an owner-operator who prefers to keep things running, this is the parts reference that matches the machine.

IMAGES PREVIEW

Delivered as an instant PDF download — no shipping, no waiting, no physical book to lose. Open it on any device in the workshop, print the pages you need for the job at hand, and keep the full 355-page catalogue on file for the next truck that comes in.