Linde H25D H30D H35D Diesel Forklift Operating Instructions Manual – 393 807 1001

Description

Linde H25D / H30D / H35D Diesel Forklift Operating Instructions – Document 393 807 1001

This is the full Linde operating instructions manual for the H25D, H30D and H35D diesel counterbalance forklift trucks from the 393 series. Issued under Linde document number 393 807 1001 EN (edition 08/2008), it is the same operating manual supplied with the truck and covers everything the operator, fleet manager or workshop needs to run, inspect and maintain these machines correctly.

Whether you are commissioning a truck for the first time, training a new driver, or servicing an existing H25D, H30D or H35D, this Linde H25D H30D H35D diesel forklift operating instructions manual lays out the correct procedures in the order they should be carried out – from the pre-start checks through to the 9000-hour service plan.

File Details

• Manual type: Operating instructions / operator’s manual
• Brand: Linde Material Handling GmbH
• Models covered: H 25 D, H 30 D, H 35 D (393 series)
• Document number: 393 807 1001 EN
• Edition / date: 08/2008
• Language: English
• Page count: 268 pages
• File format: PDF

Chapters Covered

• 1 Introduction – Your forklift truck, proper usage, symbols used, technical description, truck operation when using a shovel, reception of forklift truck, service plan before initial start-up
• 2 Safety – Safety regulations, in the case of tip-over, handling consumables, specialist, operation of industrial trucks in plant area, regulations, determination and assessment of hazards, instructions before fitting attachments
• 3 Overview – Identification plates, truck overview, controls, indicator unit, switch panel
• 4 Operation – Running-in instructions, checks before starting work, standard equipment, adjusting the driver’s seat, adjusting the steering column, setting the clock, seat belt, driving (two-pedal and single-pedal operation), drive engine starting and switching off, steering system, brake system, horn, lifting system and attachments (central lever and single lever operation), special equipment, lift mast positioning, lighting, windscreen wiper, window heater, driver’s cab, heater and air conditioning, Linde Forklift Data Management (LFM), working under load, taking up / travelling with / setting down loads, tow coupling, loading / transporting, dismantling the lift mast, driving without lift mast, transport with lorry or low-bed trailer
• 5 Maintenance – General remarks, working on Linde lift mast and at the front of the truck, inspection and maintenance data, consumables recommendations, inspection and maintenance overview (50 h, as required, 1000 h, 3000 h, 6000 h, 9000 h service plans), engine oil and filter, fuel system, coolant, water cooler and hydraulic oil cooler, engine mountings, ribbed V-belt, toothed belt, water pump, air filter and safety cartridge, dust discharge valve, charge air pressure regulator breather, oil bath air filter, particulate filter regeneration, drive axle and side stops, steering axle, battery, hydraulic oil and filters, breather, lift mast chain adjustment, forks and fork quick-releases, sideshift, fork positioner, troubleshooting, fuses, jump start, fork carriage emergency lowering, emergency exit, towing instructions, storage, disposal of old vehicles, malfunctions and remedies
• 6 Technical data – Type sheets for H 25, H 30 and H 35 (as at 05/2008), load diagrams and lift mast data, noise emission values, vibration characteristic values
• 7 Circuit diagrams (Annex) – Wiring diagrams for basic diesel equipment with pump injection engine (sheets 1-3), special equipment wiring sheets 1-9, hydraulic circuit diagram for traction, working and steering hydraulics, accumulator circuit

Altogether, this Linde H25D H30D H35D operating instructions manual gives you the complete operator and maintenance reference for the 393-series diesel trucks: safety regulations, cab controls, hydrostatic drive behaviour, lifting and attachment operation, every scheduled service from 50 h to 9000 h, fluid and torque specifications, fault-finding tables, and the electrical and hydraulic schematics needed for real diagnostic work.

What You Can Do With This Manual

The scope of this document goes well beyond a quick-start leaflet. Because it includes the full maintenance overview, technical data sheets and wiring/hydraulic circuit diagrams, it supports real workshop tasks on the H25D, H30D and H35D:

• Commission a truck correctly using the pre-start-up service plan and running-in instructions
• Adjust the driver’s seat, steering column, armrest, air-sprung seat and lumbar support
• Start, drive, brake and stop the truck safely in both two-pedal and single-pedal configurations
• Operate the lift mast, sideshift, clamps, fork positioner, rotating unit and 3rd auxiliary hydraulics
• Program and use the lift mast positioning function and the Forklift Data Management (LFM) PIN system
• Regenerate the particulate filter (both the on-board and exchangeable filter systems)
• Carry out every scheduled service – 50 h, 1000 h, 3000 h, 6000 h and 9000 h – using the correct intervals and consumables
• Diagnose faults on the diesel engine, hydraulics, electrical system, brakes and steering using the malfunction tables
• Read error codes and service data through the diagnostic connector
• Follow correct procedures for jump starting, towing, emergency fork carriage lowering and emergency exit
• Interpret the wiring diagrams and hydraulic circuit diagram for H25D, H30D and H35D trucks

Why It Matters

On a hydrostatic-drive Linde truck, small details have real consequences: the wrong engine oil grade changes the service interval, a misadjusted lift mast chain affects lift height and stability, and a low coolant level can drop the truck into crawl mode. The Linde H25D H30D H35D operating instructions manual keeps the correct values, torques, pressures and sequences in front of you rather than in a workshop that is three days away – so the right procedure is followed the first time.

IMAGES PREVIEW

Instant PDF Delivery

This Linde 393-series diesel forklift operating instructions is delivered as an instant PDF download after payment. There is no shipping, no waiting for a physical book, and no risk of a lost or damaged copy. The file opens on any laptop, tablet or phone, and any page – from the seat adjustment diagram to the hydraulic schematic – can be printed and taken to the truck. It is a practical shop-floor reference for operators, fleet managers and independent workshops working on H25D, H30D and H35D trucks.