Linkbelt 350 X3 EXCAVATOR SERVICE MANUAL WLSM3306-02LX – PDF DOWNLOAD
Original price was: $95.95.$38.95Current price is: $38.95.
Linkbelt 350 X3 EXCAVATOR SERVICE MANUAL WLSM3306-02LX – PDF DOWNLOAD
Description
Linkbelt 350 X3 EXCAVATOR SERVICE MANUAL WLSM3306-02LX – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Linkbelt 350 X3 EXCAVATOR SERVICE MANUAL WLSM3306-02LX – PDF DOWNLOAD
Check all parts when the parts are disassembled. Replace all parts that have wear or damage. Small scoring or grooves can be removed with a hone or crocus cloth. Complete a visual inspection for indications of wear, pitting and the replacement of parts necessary to prevent early failures.
Bearings:
Check bearings for easy action. If bearings have a loose fit or rough action replace the bearing. Wash bearings with a suitable cleaning solvent and permit to air dry. DO NOT DRY BEARINGS WITH COMPRESSED AIR.
Needle bearings:
Before you press needle bearings in a bore always remove any metal protrusions in the bore or edge of the bore. Before you press bearings into position put petroleum jelly on the inside and outside diameter of the bearings.
Gears:
Check all gears for wear and damage. Replace gears that have wear or damage. Oil seals, O-rings and gaskets. Always install new oil seals, O-rings and gaskets. Put petroleum jelly on seals and O-rings.
Shafts:
Check all shafts that have wear or damage. Check the bearing and oil seal surfaces of the shafts for damage.
Service parts:
Check all shafts that have wear or damage. Check the bearing and oil seal surfaces of the shafts for damage.
Lubrication:
Only use the oils and lubricants specified in the Operator’s or Service Manuals. Failures due to the use of non-specified oils and lubricants are not covered by warranty.
TABLE OF CONTENTS:
Linkbelt 350 X3 EXCAVATOR SERVICE MANUAL WLSM3306-02LX – PDF DOWNLOAD
SAFETY 1-1 19389787-0en
SAFETY, GENERAL INFORMATION AND STANDARD TORQUE DATA 1-2 46091226-0en
GENERAL INFORMATION 1-3 78709558-0en
Standard Torque Data For Cap Screws And Nuts 1-14 85783483-0en
A LOWER 2-1 71777125-0en
Specifications 2-3 53620175-0en
Main Equipment Table 2-4 78443383-0en
Main Equipment Structure and Operation Explanation 2-6 71646005-0en
Port Diagram 2-20 89929564-0en
Basic Functions 2-22 28190417-0en
Removal and Installation of Track 2-26 60049824-0en
Removal and Installation of Shoe Assembly 2-27 51621909-2en
Removal and Installation of Shoe Plate 2-31 62403640-2en
Removal and Installation of Roller 2-32 43752628-0en
Removal and Installation of Upper Roller 2-33 70775994-2en
Assembly and Disassembly of Upper Roller 2-35 40340489-2en
Removal and Installation of Lower Roller 2-42 29864701-2en
Assembly and Disassembly of Lower Roller 2-44 70962081-2en
Removal and Installation of Sprocket 2-50 86972684-2en
Removal and Installation of Take-up Roller 2-52 21755883-2en
Assembly and Disassembly of Take-up Roller 2-54 47665483-1en
Removal and Installation of Grease Cylinder 2-61 95807636-2en
Assembly and Disassembly of Grease Cylinder 2-63 70823562-2en
Removal and Installation of Center Joint 2-67 51071796-2en
Assembly and Disassembly of Center Joint 2-70 81651562-2en
Removal and Installation of Travel Motor 2-78 17820138-2en
Assembly and Disassembly of Travel Motor 2-83 51874242-0en
Maintenance Standards 2-122 16266917-0en
Pressure Measurement and Adjustment Procedures 2-129 83246188-1en
Drain Volume Measurement Procedures 2-131 72272769-0en
Air Bleed Procedure 2-133 76863098-0en
B C SWING UNIT, COUNTERWEIGHT 3-1 97410031-0en
Specifications 3-2 53620175-0en
Main Equipment Table 3-3 78443383-0en
Main Equipment Structure and Operation Explanation 3-4 71646005-0en
Port Diagram 3-12 89929564-0en
Basic Functions 3-13 28190417-0en
Removal and Installation of Swing Unit 3-17 34823529-2en
Assembly and Disassembly of Swing Motor 3-20 69583460-1en
Assembly and Disassembly of Swing Unit 3-34 12949211-1en
Removal and Installation of Counterweight 3-38 66043400-2en
Pressure Measurement and Adjustment Procedures 3-40 83246188-1en
Contents
Drain Volume Measurement Procedures 3-42 72272769-0en
Air Bleed Procedure 3-43 76863098-0en
H ENGINE 4-1 53979139-0en
Specifications 4-4 53620175-0en
Main Equipment Table 4-5 78443383-0en
Basic Functions 4-7 28190417-0en
Primary specifications 4-41 42025464-1en
Function, Structure, Operation 4-44 23620884-1en
Symptom 4-97 19251071-0en
Functional Inspection 4-111 69663730-0en
Maintenance precautions 4-122 38063852-1en
Removal and Installation of Engine Assembly 4-125 16929295-2en
Removal and installation of the fuel cooler engine inter-cooler radiator and oil
cooler 4-132
78628914-0en
Removal and Installation of Turbo Charger 4-141 43042560-2en
Removal and Installation of EGR Cooler and EGR Valve 4-143 18789894-0en
Removal and Installation of Engine Hood 4-147 76340834-2en
Removal and Installation of Muffler 4-149 65219164-2en
Removal and Installation of Cylinder Head Cover 4-150 78412812-0en
Removal and Installation of Cylinder Block 4-197 75278091-0en
Lubrication System 4-249 70203119-0en
Cooling System 4-289 69949934-0en
Removal and Installation of Exhaust Manifold 4-297 78382524-0en
Disassembly, Removal and Installation of DPD Assembly 4-303 96284664-0en
Removal and Installation of Fuel Tank 4-307 68708673-2en
Removal and Installation of Fuel Supply Pump 4-311 18906180-0en
Removal and Installation of Common Rail Assembly 4-315 24718817-0en
Removal and Installation of Injector 4-324 49612614-0en
Removal and Installation of Starter Motor 4-330 71877762-1en
Removal and Installation of Alternator 4-332 91536887-2en
Preheating System 4-333 85293671-0en
Introduction to the trouble diagnosis 4-335 89555165-1en
J HYDRAULIC EQUIPMENT (PUMP, OPERATION SYSTEM VALVE) 5-1 68276312-0en
Specifications 5-4 53620175-0en
Main Equipment Table 5-6 78443383-0en
Basic Functions 5-11 28190417-0en
Port Diagram 5-39 89929564-0en
Main Equipment Structure and Operation Explanation 0 71646005-0en
Control Valve 5-62 17724516-0en
4 Stack Solenoid Valve Operation Explanation 5-99 67705302-0en
Upper Pilot Valve (remote control valve) 5-100 25350181-0en
Travel Pilot Valve (remote control valve) 5-106 39613125-0en
Cushion Valve 5-112 11949795-0en
Removal and Installation of Hydraulic Oil Tank 5-117 38912212-2en
Removal and Installation of Hydraulic Pump 5-121 76073536-1en
Removal and Installation of Control Valve 5-127 23987319-2en
Contents
Removal and Installation of Pilot Blocs 5-130 46976647-0en
Removal and Installation of Travel Remote Control Valve 5-131 71608263-2en
Removal and Installation of Operation Remote Control Valve 5-134 14130834-2en
Removal and Installation of 4 Stack Solenoid 5-143 89670842-2en
Removal and Installation of Cushion Valve 5-147 65037997-2en
Procedures for Assembly and Disassembly of Hydraulic Pump Main Unit 5-151 59889726-0en
Pump Main Unit Maintenance Standards 5-156 54580195-0en
Procedures for Assembly and Disassembly of Control Valve 5-167 17697175-0en
Procedures for Assembly and Disassembly of Operation Remote Control Valve 5-192 80887250-1en
Procedures for Assembly and Disassembly of Travel Remote Control Valve 5-203 23581849-0en
Assembly and Disassembly of Cushion Valve 5-216 38410900-0en
Pressure Measurement and Adjustment Procedures 5-221 83246188-1en
Hydraulic Pump Flow Measurement Procedures 5-238 62052930-0en
Air Bleed Procedure 5-242 76863098-0en
Hydraulic Equipment Layout 5-243 81702821-0en
Overall view 5-244 17321643-0en
N CAB 6-1 25744330-0en
Removal and Installation of Operator’s Seat 6-2 73057136-2en
Removal and Installation of Cab Assembly 6-3 44037089-2en
Removal and Installation of Wiper 6-8 25113440-2en
Removal and Installation of Cab Front Glass 6-9 51688380-2en
Window Lock Adjustment Procedures 6-11 90955407-2en
Tightening torque 6-13 29026121-1en
R ELECTRICAL PARTS 7-1 18400544-0en
Electrical and Engine Functions and Service Support 7-4 83471066-0en
Basic Functions 7-5 28190417-0en
Accessories 7-9 18248122-0en
Milli-amp List 7-17 27599837-0en
Safety 7-19 98211632-0en
Service Support 7-23 30914595-0en
Setting 7-40 46403101-0en
EXPLANATION ON THE COMPUTERS 7-51 21113635-0en
Connection Connector Pin Layout 7-56 81470562-0en
Sequence Circuit Diagram 7-58 95593007-0en
Block diagram 7-63 61656150-0en
Electrical Equipment Layout Diagram 7-72 98466183-0en
Removal and Installation of Wiper Controller 7-107 51905383-2en
Removal and Installation of Wiper Motor 7-108 27539700-2en
Removal and Installation of Monitor 7-110 71925310-2en
Air Conditioner Overall Diagram 7-111 70666574-0en
Assembly and Disassembly of Unit 7-154 80491730-0en
Removal and Installation of Compressor 7-158 20570260-2en
Removal and Installation of Condenser 7-160 66778183-2en
Removal and Installation of Receiver Dryer 7-162 44504094-2en
Work Precautions 7-164 23051033-1en
Contents
V ATTACHMENTS 8-1 84181484-0en
Main Equipment Table 8-2 78443383-0en
Maintenance Standards 8-3 16266917-0en
Removal and Installation of Bucket Cylinder 8-11 98301591-2en
Removal and Installation of Arm Cylinder 8-15 89291212-2en
Removal and Installation of Boom Cylinder 8-20 68221461-2en
Procedures for Operation/Assembly and Disassembly of Hydraulic Cylinder 8-25 71081947-0en
Removal and Installation of Bucket 8-56 27431702-2en
Removal and Installation of Bucket Link 8-58 76395084-2en
Removal and Installation of Arm 8-60 72393523-2en
Removal and Installation of Boom 8-62 65755623-2en
Z OTHER 9-1 68145258-0en
Specifications 9-3 53620175-0en
Main Unit Weight 9-4 12343363-0en
Bolt Size and Torque Table 9-6 30335582-1en
Overall View 9-11 34508823-0en
Work Range Diagram 9-14 56618225-0en
New Machine Performance Judgment Table 9-20 72039816-0en
FLUIDS AND LUBRICANTS 9-27 18850575-0en
Main Unit-side DTC List 9-29 38993042-1en
Main Unit-side Trouble 9-31 14139955-0en
List of special tools 9-118 95642836-0en
Need help? Contact: [email protected]
https://vimeo.com/738120544
PLEASE NOTE:
- This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
- You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
- Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted
S.V
