LSIS XGB XBM-DN32H XBM-DN32HP PLC Main Unit User Manual – PDF

Description

LSIS XGB XBM-DN32H XBM-DN32HP PLC Main Unit User Manual

This is the full user manual for the LSIS XGB XBM-DN32H(V2) and XBM-DN32HP PLC main units, part of the XGT Series. Across 1,066 pages in four main parts plus an appendix, the LSIS XBM-DN32H XBM-DN32HP PLC user manual documents system configuration, specifications, installation and wiring, CPU functions, I/O behavior, built-in high-speed counter, built-in PID, embedded positioning, and both built-in Ethernet and Cnet communication. It is written for engineers, panel builders, and maintenance technicians who need to commission, program, wire, and troubleshoot the unit and its permitted expansion modules.

File Details

• Manual type: PLC main unit user manual
• Series: XGT Series (XGB Main unit, XBM-H(P) Type)
• Models covered: XBM-DN32H(V2), XBM-DN32HP
• Brand: LSIS (LS Industrial Systems)
• Language: English
• Page count: 1,066 pages
• File format: PDF
• Document number: 10310001649

Chapters Covered

• Part 1 — System: Introduction; System Configuration; Specifications; Installation and Wiring; Maintenance and Inspection; Troubleshooting; EMC Standard
• Part 2 — Basic Functions: Program Configuration and Operation Method; CPU Function; Input/Output Specifications; Built-in High-speed Counter Function; Built-in PID Function
• Part 3 — Positioning: Overview; Specifications; Operation Order and Installation; Positioning Control; Positioning Parameter & Operation Data; Internal Memory and I/O Signal; Positioning Command; Program Examples; Functions; Positioning Error Information & Solutions; Internal Memory Address of Read/Write Variable Data; Motor Wiring Example
• Part 4 — Communication: Built-in FEnet Communication; Built-in Cnet Communication
• Appendix: Flag List; Dimension Drawings; Instruction List

What This LSIS XGB PLC Manual Gives You

Rather than stopping at basic specifications, this XBM-DN32H and XBM-DN32HP PLC user manual walks through the whole engineering lifecycle of the unit. Part 1 sets out general and power specifications, ambient and vibration limits, mounting clearances, DIN-rail and panel mounting, power and grounding wiring, and detailed fail-safe circuit design — including external emergency-stop, interlock, and protection-circuit guidance. It also documents the module’s EMC conformance requirements and the low-voltage directive considerations for CE-marked installations.

Part 2 explains how the PLC executes a scan, the operation modes (RUN, STOP, DEBUG), and how to configure initialization tasks, fixed-cycle tasks, external-contact tasks, internal-device tasks, high-speed counter tasks, and positioning tasks. It describes the parameter system in XG5000, the self-diagnosis functions including the scan watchdog timer, error history logging, the I/O forced On/Off functions, direct I/O refresh through the IORF command, and run-time online editing. This is the practical core for anyone programming or maintaining an XBM-DN32H or XBM-DN32HP day to day.

Built-In Functions and I/O in Detail

The manual dedicates a full chapter to the built-in high-speed counter — up to 4 channels at 200 kpps in 1-phase mode, 2 channels at 100 kpps in 2-phase mode — covering 1-phase 1-input, 1-phase 2-input, CW/CCW, and 2-phase 4-multiplier modes, plus linear versus ring counter operation, comparison outputs, preset, count latch, frequency measurement, revolution-per-unit-time, and count pause. A separate chapter explains the built-in PID function: up to 16 loops, P/PI/PD/PID control, forward/reverse and mixed operation, PWM output, cascade control, SV ramp, PV follow-up, ΔMV and ΔPV limits, deadband, dual integral accumulation prevention, and the Ziegler & Nichols relay auto-tuning procedure with a full worked water-level control example.

Input and output specifications for the main unit and the compatible XBE expansion modules are listed in detail — DC24V input points with sink/source behavior, transistor and relay outputs, response times, insulation ratings, common arrangements, and terminal assignments. Input filter settings, pulse-catch function, and emergency output hold/clear behavior are documented so you can match the module’s response to your machine’s actual timing.

Embedded Positioning for the XBM-DN32H and XBM-DN32HP

The positioning section is substantial. It documents the 2-axis positioning built into the XBM-DN32H and the 6-axis positioning available on the XBM-DN32HP, including pulse output modes, homing methods, position and speed control, feed control, linear and circular interpolation, helical and ellipse interpolation, speed/position and position/speed switching, synchronous start by position and by speed, CAM operation, overrides, skip, continuous operation, and the positioning error code table. Parameter types (basic, extended, manual operation, homing, I/O signal, common), operation data (up to 400 steps per axis), and the internal memory map for PUT/GET commands are all documented so you can drive the unit from XG5000, XG-PM, or directly from sequence programs.

Built-In FEnet and Cnet Communication

Part 4 covers the built-in 10/100 BASE-TX Ethernet port and the built-in RS-232C and RS-485 ports. For FEnet, it documents the XGT dedicated server, Modbus TCP/IP server, XGT client and Modbus TCP client P2P services, user-defined frames, high-speed link, remote 1-stage and 2-stage access, E-mail via SMTP relay, SNTP time synchronization, and the diagnosis functions. For Cnet, it documents the dedicated server, Modbus ASCII/RTU server, XGT client, Modbus client, LS Bus client, and user-defined frame services, plus the XGT dedicated protocol frame structure with worked examples. The appendix adds the special relay (F) list, communication relay (L) list, network register (N) list, dimension drawings, and the full instruction list — including basic contacts, timers, counters, data transfer, BCD/BIN conversion, comparison, arithmetic, data process, string, trigonometric, PID, and positioning instructions.

Who This Manual Serves

If you are commissioning an XBM-DN32H or XBM-DN32HP into a panel, this LSIS XGB PLC manual is where the wiring distances, power supply requirements, ground rules, and fail-safe circuit patterns are spelled out. If you are writing or maintaining programs, the CPU function, task, I/O, and instruction chapters cover the actual behaviors — scan timing, interrupt handling, forced I/O, run-time editing, and error flag meanings. If you are integrating motion, the positioning section gives you the parameter layout, operation data structure, and command set to build homing, point-to-point, and interpolation sequences. And if you are connecting the unit to HMIs, other LSIS PLCs, Modbus devices, or enterprise systems, the FEnet and Cnet chapters document the protocols and example frames you need.

Why Correct Documentation Matters

An XBM-DN32H or XBM-DN32HP installation depends on many small details being right: whether the scan watchdog is set appropriately for the program size, whether the input filter is short enough for pulse-catch, whether the emergency output is set to hold or clear on error, whether the positioning control period fits the expansion module’s communication time, whether the RS-485 termination resistor and station numbering are correct. The manual is where those details are defined, and where each error code has a documented cause and remedy. Using the wrong setting is not just a nuisance — it can cause missed inputs, unexpected axis motion, or a safety circuit that does not trip as intended.

IMAGES PREVIEW

Instant PDF Delivery

The LSIS XGB XBM-DN32H XBM-DN32HP PLC Main Unit User Manual is delivered as a PDF file that you can download immediately after payment. There is no printed book, no shipping delay, and no waiting for the post. Open it on a laptop at the panel, on a tablet on the shop floor, or on a phone during a service call. Print the pages you need and keep them at the machine. With 1,066 pages of system, function, positioning, communication, and instruction reference organized into logical parts, this is a practical working document for anyone responsible for the XBM-DN32H or XBM-DN32HP over its service life.