Manitou 134R Genuine Parts Catalogue PDF – Gehl R134 & 1340R Skid Steer Parts Manual

Description

Whether you are rebuilding a worn loader arm, chasing a hydraulic leak, or simply replacing a cracked safety decal, this Manitou 134R Genuine Parts Catalogue hands you the factory part numbers, exploded illustrations and serial-number breakpoints needed to order the right component the first time. It covers the Manitou 134R skid steer loader together with its Gehl R134 and 1340R siblings, and it is published by Manitou BF S.A. as a multilingual parts reference in English, French, German, Spanish and Italian.

File Details

• Document type: Genuine Parts Catalogue (Catalogue Pieces d’Origine / Original Ersatzteilkatalog / Catalogo de Piezas Legitimas / Catalogo Ricambi Originali)
• Publisher: Manitou BF S.A., 430 rue de l’Aubiniere, 44150 Ancenis, France
• Machine series: Manitou 134R, Gehl R134, 1340R
• Language: English, French, German, Spanish, Italian
• Format: PDF
• Length: 236 pages
• Catalogue reference format: 647 XXX (as printed on the cover)
• Information required to place an order: catalogue reference, figure number, item number and quantity, machine type and serial number

Chapters Covered

• 00 – General Instructions and Safety Notice – safety and warning decals, R134 branding decals, T-Bar decals
• 05 – Service Parts and Filter Parts – service parts and fluids for the 1340R/R134
• 10 – Engine – engine assembly, muffler assembly, engine installation and controls, engine group 2.2L NA, fuel system, engine accessory, air induction and exhaust system, intake/exhaust 4 cylinder, cooling system, radiator cooler assembly, engine electricals, cold start kit, alternator, starter motor
• 20 – Transmission – wheel drive assembly, press/axle and lug bolt assembly
• 40 – Brake – brake solenoid valve
• 50 – Lift Structure – main loader components, lift arm assembly R134, All-Tach assembly, 60 inch muck fork, 10.6 cu.ft. light material bucket, 60 inch bucket with grab
• 70 – Hydraulics – chassis hydraulics, 3 spool control valve, lift arm hydraulics, lift cylinder, tilt cylinder, lift/tilt solenoid valve, standard hydraulics, T-Bar hydraulic controls, auxiliary hydraulics, hydrostatic system, hydrostatic drive motors, tandem pump gear pump end, tandem pump engine end, drive motor and parking brake, hydrostatic controls, hydrostatic T-Bar control
• 80 – Electrical – chassis electrical assembly, electrical/chassis, electrical disconnect, electrical lights, ROPS electrical assembly
• 85 – Operator Station – ROPS assembly, operator seat, restraint bar, ROPS safety assembly R134, shipping group
• 90 – Chassis – chassis assembly, chassis assembly R134
• 110 – Additional Equipment – cab door with wiper and washer kit, T-Bar backup alarm assembly, backup alarm, counterweight assembly, self-level hydraulics, self-level valve, horn kit, chassis fender assembly R134, sliding side windows, tyres and rims assembly, 10 x 16.5 tyre assemblies, wheel assembly, Easy Manager assembly
• 115 – Attachments – rock breaker assembly, sweeper collector, 11.6 cu.ft. bucket assembly, multi-purpose bucket, 56 inch 10.6 cu.ft. light material bucket, bolt-on cutting edge assembly, 66 inch tooth bucket assembly, 66 inch cutting edge bucket
• 120 – Diagnostic Tool and Software – tool kit assembly

Read as a whole, the catalogue works as a complete bill-of-materials for the machine. Each section opens with a plate number and title, follows with a numbered illustration showing every component in its assembled position, and closes with a parts table listing the item reference, part number, description, remarks or characteristics, quantity, machine applicability and any superseded part number. That last column matters more than it first appears: where Manitou replaced a component during production, the table tells you which number to quote today so you do not order an obsolete item that no longer fits.

Machine Coverage and Serial Number Breakpoints

The 134R changed over its production life, and this catalogue does not pretend otherwise. Assemblies are split by serial number so that you land on the correct drawing for your machine rather than a generic one. Engine installation is separated into the 2.2L NA group for SN 1815-1124718 and the later 1124762 and up build; intake and exhaust are split at SN 1873-1089150 and 1089285 and up; the lift arm hydraulics are divided between SN 1852-1124815 and 1124858 and up; the chassis electrical assembly runs through four distinct ranges from SN 1705-1081330 to 1116120 and up; the ROPS assembly is split at SN 1705-1084541 and 1084560 and up; and the self-level hydraulics change at SN 1852-1101861 and 1110966 and up. Decal and branding plates also carry their own breakpoints, and a dedicated Korean-market lift arm group is included with its own serial ranges. Checking the serial number before you open a plate is therefore the difference between a part that bolts straight on and one that comes back.

How the Exploded Views Are Organised

Illustrations are the backbone of this parts manual. Every plate is drawn as a numbered exploded view, so a fastener, spacer, bushing, O-ring or clamp that would be invisible on an assembled machine still has its own reference balloon and its own line in the table. Hydraulic routing is shown with the tubes, hoses, elbows, tees and quick couplers in position rather than as an abstract schematic, which makes it straightforward to identify a single JIC fitting in a long run. The hydrostatic section breaks the tandem pump down to its gear pump end and engine end, lists the drive motor and parking brake as separate assemblies, and includes the internal components of the pump – swashplate, cylinder block kit, valve plate, trunnion cover and seal kits – so a rebuild can be quoted part by part instead of as a complete unit. Torque-critical hardware is listed by grade and size, including the M6 through M20 nylon lock nuts, hardened washers and grade 8.8 and 10.9 bolts used throughout the chassis, ROPS and lift structure.

What the Catalogue Covers Beyond the Loader Itself

Because this is the full machine catalogue rather than a drivetrain-only extract, it also documents the operator environment and the attachment range. The operator station section covers the seat, restraint bar, gas springs and ROPS weldments. The additional equipment chapter covers the cab door with wiper and washer kit, backup alarm, counterweight, horn, sliding side windows, fenders, Easy Manager module and the complete tyre and rim assemblies. The attachments chapter then adds the rock breaker, sweeper collector, multi-purpose bucket, bolt-on cutting edge and the 56 inch and 66 inch buckets. For anyone running a small fleet or a rental yard, that breadth means one document answers parts queries across the whole machine and its tooling.

Why This Parts Catalogue Is Worth Having on the Shelf

Ordering from a photograph or a description is how wrong parts get shipped. This Manitou 134R Genuine Parts Catalogue removes the guesswork by giving you the exact plate, the exact item reference and the exact part number, together with the quantity the assembly actually uses – so when you replace a bushing you know whether the drawing calls for one or two, and whether a seal kit is sold separately or included. It supports routine servicing through the filter and fluid lists, mid-level repairs such as lift and tilt cylinder reseals or drive motor work, electrical fault-finding across the chassis and ROPS harnesses, and full attachment servicing. Independent workshops, dealership parts counters and owner-operators all work from the same numbered plates, which makes cross-checking a quoted number quick and unambiguous.

IMAGES PREVIEW

Delivery is immediate. The catalogue arrives as a downloadable PDF the moment payment clears, with no shipping cost and nothing to wait for in the post. Keep it on a laptop in the workshop, open it on a tablet beside the machine, or print the plates you need and take them into the yard – a printed copy of a single exploded view is often the fastest way to work. Because the file is complete, every serial-number variant and every market-specific group is included in one document rather than split across separate supplements.