Manitou MSI 20 D / MSI 25 D / MSI 30 D Genuine Parts Catalogue PDF

Description

Manitou MSI 20 D, MSI 25 D and MSI 30 D Genuine Parts Catalogue

This Manitou MSI 25 D Genuine Parts Catalogue is the illustrated spare parts reference for the MSI 20 D, MSI 25 D and MSI 30 D rough-terrain forklift range, and it also carries the Buggie and TI variants of those machines. Components are not left to guesswork: each assembly appears as an exploded drawing with numbered callouts that tie directly into the accompanying parts listing, so a counter or workshop can pin down the correct item from the figure number and the part reference alone. The catalogue reference printed throughout the document is 547041, and the volume runs to 369 pages of diagrams, parts lists and load charts.

File Details

• Manual type: Illustrated genuine spare parts catalogue (parts book)
• Brand: Manitou
• Catalogue reference: 547041
• Models covered: MSI 20 D, MSI 25 D, MSI 30 D, MSI 20 D Buggie, MSI 25 D Buggie, MSI 30 D Buggie, MSI 25 D Buggie TI, MSI 25 D TI, MSI 30 D Buggie TI, MSI 30 D TI
• Languages: English, French, German, Spanish, Italian
• Pages: 369
• Format: PDF

Chapters Covered

• Load charts and capacity tables (abaque de charge) for the Buggie, TI and standard versions
• Adhesive and decal sets
• Chassis and bodywork
• Counterweight and frame
• Soundproofing
• Driver’s station and body structure
• Overhead guard details
• Cab and cab details
• Cab wiring harness and conductor protection
• Seats
• Fuel circuit
• Electrical circuit — main
• Electrical circuit — engine
• Lighting circuit and signalling
• Reverse light and reverse alarm (option)
• Emergency stop pushbutton (option)
• Radiator protection grid and pre-filter adaptation (option)
• Front wheels and tyres
• Rear wheels and tyres (option)
• Hydrostatic transmission circuit
• Variable displacement pump
• Hydrostatic motor
• Wheel reduction gearbox
• Hydraulic circuit — main
• Hydraulic accumulator (option)
• Steering circuit
• Steering cylinders
• Lifting and tilting circuits
• Lifting cylinders — left-hand, right-hand, free lift
• Tilting cylinders — 10°/12° and 6°/6° standards
• Lifting cylinder branch connections
• Attachment locking cylinder
• Distributors and valve banks, including lever-in-line option
• Hydraulic kits, 3rd and 4th element, double-acting
• Reclining carriage and hydraulic locking carriage
• Cab lifting circuit
• Hydraulic inching transmission cut-out (option)
• Engine block, cylinder block, pistons, connecting rods and crankshaft
• Cylinder head
• Rocker arm shaft and rocker cover with breather
• Timing gear and camshaft
• Oil pump and oil pan
• Flywheel housing
• Starter
• Alternator
• Water pump and cooling system
• Intake manifold and exhaust manifold
• Oil filters and filter and belt sets
• Engine-transmission adaptation
• Seal kits and gasket sets
• Pedals and linkages
• Inching pedal / direction reverser by foot (option)
• Duplex masts, 3.00 m to 6.00 m lifting height
• Duplex masts with full free lift
• Triplex masts, 3.30 m lifting height
• Triplex masts with full free lift, 3.70 m to 7.00 m
• Load carriages (costilla de carga)
• Side shift frames
• Quick coupler kits

Because every one of those systems is split into its individual components rather than shown as a single assembled unit, the catalogue works as a genuine breakdown reference: bearings, seals, rings, rods, hoses, fittings and end fittings all appear as separately identified positions on the drawings. Hydraulic sections in particular cover branch connections, flexible hose and connection details with the pipe and port diameters printed alongside the item numbers, which is exactly the level of detail needed when a hose has to be reproduced or a fitting matched. Engine coverage is equally granular, with the cylinder block, pistons and connecting rods, crankshaft, cylinder head, rocker arm shaft, timing gear and camshaft, oil pump, oil pan, flywheel housing, starter and alternator all broken down on their own figures, and a separate seal kit or gasket set figure for the assemblies that need one.

Masts, Carriages and Attachments

The mast section is organised by lifting height and configuration rather than as one generic drawing, so the correct figure can be matched to the machine on the floor. Duplex masts appear for the shorter lifting heights and again for the taller ones, duplex full free lift masts are drawn separately, and triplex full free lift masts are split across several figures depending on the height range the machine is fitted with. Load carriages, side shift frames and the hydraulic kits for a third and fourth element are all covered, including the double-acting versions, and the reclining carriage with hydraulic locking has its own figure. If the machine is running an attachment circuit, the relevant kit drawing will be in here.

Load Charts and Machine Identification

Capacity tables for the MSI 20 D, MSI 25 D and MSI 30 D are included, split by tyre width and by mounting option, with the Buggie and TI versions shown on the same figures. The tables are set out against lifting height and load centre distance, so the rated capacity for a given mast and attachment combination can be read off directly rather than inferred. Because the catalogue is issued by machine type and serial number, the figures also carry start-from-machine and up-to-machine serial breakpoints where a component changed during production, which matters when a machine sits either side of a running change.

Ordering Parts from This Catalogue

The front of the document sets out the ordering method the parts listings are built around: quote the catalogue reference, the figure number, the item reference and quantity, and the machine type together with its number in the series. Working that way, a dealer can identify the exact reference for the part required without a description or a photograph. The same instructions are repeated in each of the five languages the catalogue is printed in, which makes it usable across a mixed fleet or a multilingual workshop.

What This Parts Catalogue Lets You Do

IMAGES PREVIEW

With this Manitou MSI 20 D / MSI 25 D / MSI 30 D Genuine Parts Catalogue open, a part number can be traced for virtually anything on the machine — a hydraulic hose and its end fittings, a seal kit for a lifting cylinder, the correct tilting cylinder for a 10°/12° or 6°/6° standard machine, a wheel reduction gearbox component, a cab harness, a water pump, an alternator, a complete mast assembly or a load carriage. That is the difference between ordering the right component first time and returning the wrong one, or between rebuilding an assembly to specification and guessing at what went inside it. Each drawing shows how the parts relate to one another, so seals, spacers, bearings and retaining hardware are identified in the order they are assembled rather than discovered halfway through the job. The file is delivered as an instant PDF download after payment, with nothing to ship and no waiting on a courier — it opens on a laptop, tablet or phone in the workshop, and any figure or parts list can be printed and taken to the machine, kept on the bench, or marked up as the rebuild progresses.