Manitou MT 732 MT 932 MT 1030 S Turbo Parts Catalogue – CD 647083

Description

Manitou MT 732, MT 932 and MT 1030 S Turbo Parts Catalogue – Reference CD 647083

This is the full Manitou parts catalogue issued under reference CD 647083 for three telescopic handler ranges: MT 732 S.E-E3, MT 932 S.E-E3 and MT 1030 S Turbo S.5-E3. It is the illustrated spare parts book used to identify and order components by figure number, part number and description, with machine-specific quantity columns so you can confirm a part belongs to your exact machine before ordering. The catalogue applies from machine numbers 588 562 and 588 714 onwards, and the content is presented across French, English, German, Spanish and Italian headings so the same exploded view serves every market.

File Details

• Manual type: Illustrated parts catalogue (spare parts book)
• Brand: Manitou
• Reference: CD 647083
• Edition: 1st edition (1ère édition / 1st date of publication)
• Publication code: IC 60108 / 2010
• Applies from machine number: 588 562 – 588 714
• Languages: French, English, German, Spanish, Italian
• Format: PDF (instant download)
• Approx. page count: 681 pages of illustrations and parts lists

Chapters Covered

The catalogue is organised by figure code (for example 2 AA 230, 4 AA 936, 10 AA 848) and each figure carries its own exploded drawing plus a matching parts list. The main groups covered are:

• Filters and belts – cyclonic pre-filter, engine oil filter, fuel filter, hydraulic return filter, alternator belt, fan belt
• Wheels and tyres – wheel rim, tyre and valve assembly
• Engine-transmission adaptation – air filter housing and ducting, mounting brackets, silent blocks, support arms
• Belt drive and fan assembly
• Radiator and cooling pack – water radiator, oil radiator, air radiator, cowling, hoses, brackets
• Fuel circuit – tank, sender, filler, return pipe, pre-filter
• Floating forks carriage
• Jib / boom sections and telescopic boom assemblies
• Chassis and counterweight
• Brake circuit and handbrake
• Pedals and linkage
• Seat assembly
• Cab adaptation, cab frame, glazing and cab interior trim
• Bodywork – mudguards, rear capping, engine bonnet, sound proofing
• Main hydraulic circuit – oil tank, pump, valve bank, return filter
• Lifting and telescoping hydraulic circuits
• Compensation / jib feed circuit
• Jib circuit
• Stabilizer circuit
• Steering circuit and hydraulic distributor
• Lift, compensation, telescope, tilt and stabilizer cylinder assemblies
• Electrical circuit – relay and fuse plate, cab controls, engine and transmission sensors
• Adhesive and decal set
• Grease points
• Engine assembly – cylinder block, pistons/rods/crankshaft, cylinder head, rocker shaft, timing gear and camshaft, oil sump and oil pump, rocker cover and breather, oil filter and oil cooler, water pump, exhaust manifold, alternator, flywheel, starter motor, turbocharger, fuel circuit
• Gear box and converter
• Angle return (bevel drive)
• Cardan couplings – gear box to front axle, gear box to rear axle, engine to angle return
• Front axle – casing, differential, reduction gear, oil bath disc brake, steering system
• Rear axle – casing, differential, reduction gear, oil bath disc brake, steering system

Put together, this is not just a list of numbers. Every major mechanical system on the three telehandlers is broken down into component-level illustrations, with a numbered callout for each individual part and a table beside it giving the Manitou part number, the description in five languages, and the quantity required for each of the three machine variants. That structure makes it possible to trace a component from the whole assembly down to the bolt, washer or seal that holds it, which is exactly what you need when rebuilding a cylinder, replacing a seal kit, chasing a hydraulic leak, or matching a broken bracket against the right reference.

What This Parts Catalogue Lets You Do

The catalogue covers the full working life of the machine, from routine consumables through to deep assembly work. On the routine side it lets you match the correct filter cartridge, cyclonic pre-filter, fuel pre-filter, hydraulic return cartridge, alternator belt and fan belt for the MT 732, MT 932 and MT 1030 S Turbo without relying on guesswork. On the heavy side it lets you strip and rebuild the main hydraulic circuit, the lifting and telescoping circuits, the compensation and jib feed circuits, the stabilizer circuit and the steering circuit, using the exploded views to confirm the correct sequence of fittings, adaptors, unions, half-clamps, protection plates and hoses.

The engine sections are equally detailed. If you are working on the 1104D-44TA or the 1104D-44T engine, the catalogue gives you separate figures for the cylinder block, pistons, connecting rods and crankshaft, the cylinder head with its inlet and exhaust valves, the rocker shaft assembly, the timing gear and camshaft, the oil sump and oil pump, the rocker cover and breather, the oil filter and integral oil cooler, the water pump, the exhaust manifold, the alternator, the flywheel, the starter motor, the turbocharger and the complete fuel circuit including the injection pump, injectors, injection pipes and pre-heating plugs.

The driveline is covered the same way. Gear box and converter, angle return bevel drive, all three cardan couplings, and both the front and rear axles with their casings, differentials, epicyclic reduction gears, oil bath disc brakes and steering systems are each given their own illustrated breakdown with shim thicknesses, circlips, bushings, bearings and seal kits listed by reference.

Why a Genuine Parts Reference Matters

Telehandlers are hard-working machines and the parts that wear are rarely the ones you can guess at. A seal kit for a 70 mm lifting cylinder is not the same as one for a 60 mm tilting cylinder, and a shim that is 0.15 mm thick does not substitute for one that is 0.50 mm thick. Using the correct figure and part number from this catalogue removes the risk of ordering a component that fits the machine next to yours but not the one in your yard, and it saves the time lost to returned parts, damaged seals and re-opened hydraulic circuits.

The five-language description columns are a practical advantage too. Whether you order through a French, English, German, Spanish or Italian speaking supplier, the same part number and the same description appear side by side, so there is no ambiguity about which filter, which seal or which fitting is being requested.

IMAGES PREVIEW

Instant PDF Delivery

Once payment is complete the parts catalogue is delivered as a PDF download – no shipping, no waiting for a courier, no printed binder to lose in the workshop. It opens on a laptop, tablet or phone, and any page can be printed if you prefer a paper copy on the bench while you work. Whether you are servicing a single MT 732, running a fleet of MT 932 machines or maintaining an MT 1030 S Turbo, this CD 647083 catalogue gives you the exploded views and part references you need in a single document.