Manitou MT-X 732 & MT-X 1030 ST Telescopic Handler Operator’s Manual 2011 – PDF Download

Description

File Details

• Manual type: Operator’s Manual (Original Instructions)
• Brand: Manitou (MANITOU BF)
• Models covered: MT-X 732 Série D-E3, MT-X 1030 S T Série 4-E3
• Document number: 647236 EN
• Issue date: 18/03/2011
• Language: English
• Page count: 144
• File format: PDF

What This Operator’s Manual Covers

1 – Operating and Safety Instructions

This opening chapter sets the operating framework for the MT-X 732 and MT-X 1030 S T telehandlers. It walks through site management, operator authorisation, and the lift truck’s suitability for the job, with static and dynamic test coefficients referenced to EN 1459. Environmental adaptation — from road lighting and reverse buzzer options to lubricant selection for cold and hot climates — is detailed. Separate sections address lifting people (prohibited except with a Manitou-approved platform), taking up and laying high loads on tyres and on stabilisers, travelling with a suspended load, and radio-control use. Daily pre-start checks, driving, stopping, and public-highway rules are all set out, together with transverse attitude limits, the longitudinal stability alarm’s aggravating movements, and the load-handling sequence for palletised and non-palletised loads.

2 – Description

Identification plates for the lift truck, I.C. engine, gearbox, angle gearbox, and axles are shown with their data fields. Full characteristics tables follow for both MT-X 732 Série D-E3 and MT-X 1030 S T Série 4-E3, covering the Perkins 1104D-44T and 1104D-44TA engines, Turner gearbox, Dana axles, hydraulic circuit pressures and flow rates, movement speeds, and weight distribution. Front and rear tyre tables list Michelin, Dunlop, Good Year, Alliance and Galaxy fitments with pressures and load ratings. Dimensions and load charts are reproduced for both models, followed by the instrument and control layout — driver’s seat, safety belt, control and signal light panel, longitudinal stability alarm, switches, ignition, gear lever, forward/reverse selector, parking brake, steering selection, and hydraulic controls. Towing pin and hook, the options catalogue, and the battery cut-off, preheating, anti-theft, and hydraulic attachment locking systems are all illustrated.

3 – Maintenance

This is the workshop-grade core of the manual. It opens with a start-up checklist and a full filters, cartridges and belts reference, then a lubricants and fuel table with recommended Manitou part numbers and capacities. The servicing schedule is split into A (daily or every 10 hours), B (every 50 hours), C (every 250 hours), D (every 500 hours), E (every 1000 hours), F (every 2000 hours) and G (occasional maintenance). Daily service covers engine oil and coolant levels, fuel, pre-filter draining, cyclonic pre-filter, gearbox oil, tyre pressures and wheel nut torque, and boom greasing. Subsequent intervals add dry air filter cleaning, radiator and condenser cores, boom and carriage greasing, brake oil level, cab door lubrication, stabiliser greasing, fan and alternator belt tension, angle gearbox oil level, parking brake adjustment, differential and wheel reducer oil levels, engine oil and filter change, fuel filter change, gearbox oil strainer, hydraulic oil and suction strainer, cooling liquid drain and fill, and air conditioning. Occasional maintenance covers fuel system bleeding, wheel changing, headlight setting, towing, and lifting/transporting the lift truck.

4 – Adaptable Attachments in Option on the Range

Attachment handling procedures — taking up, locking, connecting, releasing and laying down — are given for both manual and hydraulic attachments. Technical specifications are tabulated for the floating fork carriage (TFF), floating fork side-shift carriage, tilting fork carriage (PFB), standardised side-shift carriage (TDL), forks, load back rest, building buckets, loading buckets (CBR), grain buckets (CBA), 4×1 bucket, multipurpose bucket (CBM), grab buckets (CBG), concrete buckets (BB, BBG), spout buckets (GL), manure forks with grab (FFGR), winches (H), crane jibs (P, PT, PO, PC), and attachment shields. Compatibility rules for the single side-shift carriage (TSDL) are stated explicitly, including which attachments may and may not be used.

Who This Manitou Telehandler Manual Is For

If you run, service or own an MT-X 732 Série D-E3 or MT-X 1030 S T Série 4-E3, this operator’s manual is the working document that keeps the machine inside its design envelope. It is the same instruction set issued with the machine in 2011 under document number 647236 EN, covering the complete operating and safety instructions, full machine description with technical characteristics, the entire maintenance schedule from 10-hour checks to 2000-hour service, and the approved attachment range with capacities and weights.

Operators get the correct daily inspection routine, the transverse attitude and longitudinal stability alarm procedures, and the load-handling sequences that protect both the machine and the people around it. Maintenance technicians get the full interval schedule, lubricant and fuel part numbers, torque values such as 630 N.m wheel nut tightening, tyre pressures, belt tension settings, and hydraulic circuit service pressures. Fleet managers get the authoritative reference for machine identification, serial and plate data, and the approved attachment matrix — including the TSDL compatibility rules that prevent deformed carriages and dropped loads.

Get the Complete MT-X 732 and MT-X 1030 ST Operator’s Manual as a PDF

IMAGES PREVIEW

This Manitou MT-X 732 and MT-X 1030 ST operator’s manual arrives as an instant PDF download — no shipping, no waiting for a printed binder. Open it on a laptop in the workshop, a tablet in the cab, or a phone on site, and print only the pages you need for a service job. Keep a copy on every device your team uses, and stop relying on half-remembered torque figures, missing decals or guesswork on the stability alarm.

Whether you are running daily checks, adjusting the parking brake, greasing boom pads, replacing the hydraulic return filter, or reviewing the load chart before a lift, the answer is in this 647236 EN manual. Download it today and put the manufacturer’s own procedures, specifications and safety instructions back within reach of the people operating the machine.