Manitou MVT 1130L 1230LS 1230SL 1330SL Genuine Parts Catalogue – Illustrated Spare Parts Manual PDF

Description

Manitou MVT 1130L, 1230LS, 1230SL and 1330SL Genuine Parts Catalogue

This is the illustrated spare parts catalogue for the Manitou MVT 1130L, MVT 1230LS, MVT 1230SL and MVT 1330SL telescopic handlers. Every assembly on the machine is drawn as an exploded figure and then listed line by line with the item reference, the Manitou part number, the component name and the quantity required. It is the reference a parts counter, a workshop or an owner uses to identify a component from a picture instead of guessing from a description.

Because a telehandler is built from many sub-assemblies that changed across the production run, the catalogue is split into base figures and lettered variants (for example 90, 90A and 90B, or 40, 40A and 40B). Each variant carries its own applicability note stating which machine serial numbers it covers, so you can match the figure to the actual machine on the floor rather than to the nearest guess.

File Details

• Manual type: Illustrated spare parts catalogue (parts book)
• Brand: Manitou
• Models covered: MVT 1130L, MVT 1230LS, MVT 1230SL, MVT 1330SL
• Catalogue reference: 547531
• Languages: English, French, German, Spanish, Italian
• Page count: 552 pages
• File format: PDF

Chapters Covered

The catalogue is organised by figure number, following the machine from its decals through to the fork carriage:

• Adhesives, decals and identification plates (figures 380, 381, 382, 390, 400, 401)
• Filters and belts (figures 00, 00A)
• Engine – transmission adaptation (figure 20)
• Starter motor belt (figures 720, 720A)
• Filter head and oil cooler assembly (figure 750)
• Low pressure fuel system (figure 860)
• Hydrostatic transmission circuit (figures 90, 90A, 90B)
• Pre-filter assembly (figure 960)
• Safety system (figure 320)
• Body – frame (figures 50, 50A, 51, 51A, 52, 52A)
• Ballast and counterweight (figure 340)
• Fuel tank (figures 350, 350A)
• Stabilizer frame and linkages (figures 330, 331)
• Cab and fuse box (figures 65, 65A)
• Engine and hydrostatic transmission mounting (figures 80, 80A, 80B)
• Heating plug (figure 880)
• Oil pressure switch and gauge (figure 930)
• Sensors and washers (figure 940)
• Hydraulic servo-control circuits (figures 150, 150A, 150B, 150C)
• Hydraulic control circuits, TUV specification (figures 151, 151A, 151B, 152, 152A, 152B, 152C, 153, 153A, 153B)
• Levelling system hydraulics (figures 270, 270A, 270B, 271, 271A, 271B)
• Lighting and signalling (figures 360, 360A)
• Electrical system details (figures 370, 370A, 371, 371A, 372, 372A, 372B)
• Cab details and fittings (figure 63)
• Levers and linkage (figure 70)
• Heater and starter switch (figure 920)
• Wheels and tyres (figures 10, 10A, 11, 11A, 12)
• Rear axle assembly (figures 420, 420A, 460, 460A, 470)
• Front axle assembly (figures 410, 410A, 430, 430A, 440, 440A, 450, 450A, 470A, 480, 480A)
• Axle locking (figures 280, 280A, 280B, 280C, 240, 240A, 240B, 240C)
• Compensation circuit (figures 120, 120A, 121, 121A, 122, 122A, 123, 123A, 220, 220A, 220B, 220C)
• Steering valve (figure 160)
• Tilting circuit and rams (figures 110, 111, 230, 230A, 231A, 231B)
• Main hydraulic circuit (figures 100, 100A, 100B, 101, 101A, 102A, 102B)
• Stabilizer hydraulics (figures 130, 130A, 140, 140A, 140B, 250, 250A)
• Cooling fan circuit (figures 170, 170A, 170B, 171, 171A, 171B)
• Valve banks and control blocks (figures 290, 291, 292, 293, 300, 310, 156, 491)
• Joystick and remote control units (figures 154, 154A, 154B, 155, 155A)
• Levelling cylinder assemblies (figures 260, 260A, 260B)
• Lifting cylinders (figures 190, 190A, 191, 191A, 192, 192A)
• Telescoping boom cylinders (figures 200, 200A, 201, 201A, 210, 210A, 211, 211A)
• Telescopic boom attachment and jib (figures 40, 40A, 40B, 41, 41A, 41B)
• Engine unit assemblies (figures 1000, 570, 600, 610, 620, 630, 640, 690, 700, 730, 740, 760, 770, 810, 890, 900, 910, 950, 980, 990)
• Timing gear and lubrication (figure 650)
• Intake system and exhaust (figures 820, 830, 840)
• Fuel supply system and injection (figures 660, 670, 680, 850, 870, 970)
• Electrical system – starter, alternator, regulator (figures 710, 790, 800)
• Cooling system (figure 780)
• Braking circuit and pedals (figure 180)
• Cab structure, doors, glazing and seat (figures 60, 61, 62, 64, 64A)
• Propshaft (figure 580)
• Transfer box (figures 490, 490A, 500, 500A)
• Hydrostatic pump components (figures 510, 520, 530, 540, 550, 560)
• Fork carriage (figures 30, 31)

Read together, these figures cover the whole machine. A technician can trace a leaking hose from the hydraulic circuit figure back to the correct banjo connection and olive, identify which of the four lifting cylinder variants is fitted, or look up the exact shim and seal that belongs to a particular axle build. Every line is a purchasable item with its own Manitou number, which means the catalogue doubles as a verification tool: you confirm the part number against the drawing before the order goes out.

How the Figures Are Laid Out

Each figure opens with a header strip naming the system in five languages. An exploded drawing sits below it, with balloon numbers pointing at each component, and the parts table follows with the matching item numbers. Where a machine serial range changes the build, a small boxed note on the drawing states the break point, for example a figure that applies from a given machine number onwards or only up to a given number. Italian-only components and TUV-specification variants are flagged the same way, so a buyer in a specific market can see immediately which figure applies.

Consumables are included alongside hard parts. Filters and belts have their own dedicated figure with the oil filter, air filter, fuel filter, transmission filter and hydraulic filter elements all drawn and numbered, plus the belt set called out as a kit. That single page is usually the most-used page in a parts book of this kind.

What This Parts Catalogue Lets You Do

With this Manitou MVT parts catalogue open, you can price and order a component from the drawing rather than from a photograph or a verbal description. You can confirm whether the part fitted to a MVT 1330SL is the same as the one used on a MVT 1130L, check which axle locking or compensation cylinder variant belongs to a particular machine number, and identify seals, shims, greasers, clamps and fasteners that are almost impossible to describe accurately over the phone.

Getting the part number right the first time matters on a telehandler. A wrongly ordered hydraulic fitting, a seal kit for the wrong cylinder generation or a belt for the wrong starter motor layout means a machine standing idle while the correct item is sourced. The exploded views and serial-number applicability notes are what prevent that.

IMAGES PREVIEW

The catalogue is supplied as an instant PDF download. There is no shipping, no waiting for a disc, and no courier. Open it on a laptop in the workshop, on a tablet at the machine or on a phone in the yard, search or scroll to the figure you need, and print the pages you want to take to the parts counter. Once downloaded, it stays with you for the life of the machine.