Massey Ferguson 6497 6499 Parts Catalog 2007 PDF – 1637445M5 Illustrated Parts Manual

Description

Massey Ferguson 6497 & 6499 Parts Catalog – 1637445 M5

This is the illustrated parts catalog published for the Massey Ferguson 6497 and Massey Ferguson 6499 tractors under document number 1637445 M5, dated 04/07 (April 2007). It is the reference buyers use when a part number has to be right the first time – every section is built around exploded illustrations with keyed reference numbers, paired with a text list that gives the part number, quantity required and the multilingual description for each item shown.

Because the Massey Ferguson 6497 6499 parts catalog is set up as a group-indexed document, you move from the illustration directly to the part. Each drawing carries its own reference numbers, and the facing text page repeats those numbers with the part number, the quantity needed for that particular assembly, and any change markers. The result is that you can identify a component visually, confirm the exact part number for the MF 6497 or MF 6499 you are working on, and order without guesswork.

File Details

• Manual type: Illustrated Parts Catalog
• Brand: Massey Ferguson
• Models covered: MF 6497, MF 6499
• Document number: 1637445 M5
• Edition / date: M5, 04/07 (April 2007)
• Languages: English, French, German, Italian, Spanish
• File format: PDF

Chapters Covered

The catalog is organised into twelve illustrated groups, each with its own page range and a series of sub-assemblies. The Massey Ferguson 6497 6499 parts catalog PDF follows this structure:

• Engine & Equipment (group XA06) – engine assembly and short engine, gasket and repair kits, pistons and cylinder head with valves, cylinder block and cylinder head, crankshaft, valve mechanism and camshaft, timing gear housing, oil sump, lubricating oil pump, oil cooler and filter, water pump, thermostat, injection system, low pressure fuel system, fuel tank and attachments, air intake and exhaust, turbocharger pipes, vertical side exhaust, heater engine block, electronic engine management, starter, alternator and bracket
• Clutch (group XD01) – flywheel and flywheel housing, wet clutch with power shuttle, power shuttle, front spacer with power shuttle, clutch pedal and linkage, pedals and controls
• Transmission (group XE04) – Dynashift transmission housing, Dynashift with power shuttle, heavy duty transmission power shuttle, transmission control with power shuttle, creeper gearbox control, shift lever, control armrest, joystick for distributor with electrodynamique control
• Rear Axle (group XG01) – centre housing, handbrake and mechanism, intermediary housing, rear axle differential, differential lock mechanism, short rear axle housings, outer final drive gear
• Linkage (group XG55) – electronic lift and lift arms, lift cylinders, lift cylinder feeding, levelling box, sensing pin, top link with hook end, top link with ball end, top link lock, lower bars with hook, telescopic lower bars, tube stabilizers, automatic stabilizers, shoe stabilizers, drawbar, swinging drawbar, swinging drawbar support, swinging drawbar tidying, hitch and clevis fittings, automatic hitch with remote control, Autohitch Dromone, hydraulic control for Autohitch
• PTO Drive Mechanism (group XG56) – PTO shaft, independent PTO clutch, independent PTO drive mechanism and brake, PTO coupling drive mechanism, front PTO drive, front PTO housing, front PTO clutch
• Front Axle (group XJ01) – front axle 2 wheel drive, front axle fixed Carraro, front axle suspended Carraro, bracket and housing, differential, final drive, guard and transmission shaft, front axle 4 wheel drive clutch, rims and wheel weights
• Hydraulic (group XP28) – hydraulic control casing, cover left-hand pump/filter load sensing, cover right-hand load sensing, dipstick/centre housing, hydraulic lift valve, auxiliary distributor, auxiliary distributor installation, control with two/three/four distributors mechanical control load sensing, electro-hydraulique combinations, hydraulic coupling, male coupler, oil cooler, oil recovery, steering pump, steering wheel and column, steering hydraulic lines, front suspension hydraulic lines, pipes and fittings, assisted brakes, brake pedals, pedals brackets, air intake tubes rear axle
• Electrical Equipment & Instrument Panel (group XU21) – instrument panel and instruments, electric equipment and instrument panel, side console switches, external controls fitted on the rear fenders, engine harness, instrument panel harness, armrest, roof harness, pillar harness, rear lighting harness, trailer electric socket, sensors, automatic air conditioner harness and sensors
• Electronic Equipment (group XU22) – electrical wiring, main harness, console, sensor harness dual control, sensors, electronic lift, radar, Fieldstar, control box, control box harness and cab controls
• Body (group XY54) – hood, hood handle, screen frame, hood frame, footstep, tool box, emblems, speed charts, safety decals, literature
• Tractor Cab (group XY55) – cab mountings, with suspension, suspended cab control unit, pressure regulator and filter, compressor, air tank, tractor cab, doors, glass, side window mechanism, rear window mechanism, roof, high visibility roof, heating hatchway, air hatchway, cladding, dressing roof, cab insulation, instrument panel cladding, fenders, fender supports, heater, hoses, air conditioner, hose assemblies, windscreen washer, front windscreen wiper, rear window wiper, canopy, radio installation, electrical plug and cigar lighter, internal mirrors, external mirrors, electric control rear reflecting mirror, seats, secondary seat, seat belt

IMAGES PREVIEW

How the parts information is organised

The Massey Ferguson 6497 6499 parts catalog 1637445M5 is built so that identification and ordering sit side by side. Illustrations carry position numbers, and the accompanying part number reference list gives the part number in one column, the item description across five languages in the remaining columns, and the quantity required for the illustrated assembly in a dedicated column. Where an asterisk appears against a reference number it signals a change since the previous print, which matters when you are ordering against an older machine and need to know whether a component has been superseded.

Part number identification is handled inside the document itself. Certain prefixes mark recommended stocking parts, marketing key parts, or parts without specific marks. That coding is visible in the identification explanation at the front of the catalog, so a buyer can see at a glance whether a given part number is a normal service item, a stocked item, or a marketing key part.

Alphabetical and numerical indexes

Two indexes run alongside the illustrated groups. The alphabetical index lists assemblies by name – hydraulic control casing, steering pump, clutch pedal, front axle Carraro differential, tilt cylinders, PTO shaft and so on – each with the page where the assembly appears. The numerical index lists part numbers in sequence with every page on which each number is used, so if you already know the part number you can go straight to the drawing instead of hunting through the groups. Together they make the Massey Ferguson 6497 6499 parts manual practical for both browsing and targeted lookup.

Multilingual descriptions

Every item description in the catalog is printed in English, French, German, Italian and Spanish. That makes this Massey Ferguson 6497 6499 parts catalog PDF usable across markets without cross-referencing separate language editions, and it means part names can be matched against local terminology when ordering through a dealer.

Safety and decal cross-references

Where an assembly originally carried a safety decal, the catalog notes that the corresponding decal must be ordered and fitted with the replacement part. That note runs throughout the affected groups, so a rebuild that includes painted or covered parts can be brought back to the correct safety configuration at the same time.

Revision and serial-change information

Several groups in the Massey Ferguson 6497 6499 parts catalog are split by serial break, with separate listings for machines up to a given number and machines from that number onward – for example around the front PTO housing, hydraulic cover assemblies, seat mountings and other assemblies that were revised during production. A machine’s serial number therefore determines which of the two lists applies before you order. Change markers and the serial splits together make this catalog usable across the production spread of both tractors rather than only one build batch.

What this Massey Ferguson 6497 6499 parts catalog gives you

Working from the illustrations is the fastest way to identify a component that has no obvious external markings – a bearing carrier, a shim pack, a specific bolt length, a bushing inside a housing, or a small bracket that has to match the assembly it sits in. The Massey Ferguson 6497 6499 parts catalog 1637445M5 supplies that identification layer directly, so a rebuild, a repair, a restoration, or a routine replacement order can be placed with the correct part number and the correct quantity, not an approximation.

For a workshop, having the complete group index plus the numerical and alphabetical indexes in one document means less time spent on the telephone and fewer returns from wrongly ordered components. For an owner maintaining a single tractor, it means a job can be planned against the actual parts list rather than a guess based on a similar model.

Covered operations include engine and cylinder head work, timing gear housing, fuel injection, cooling and lubrication, clutch and power shuttle rebuilds, Dynashift transmission assemblies, rear axle differentials and final drives, lift and linkage assemblies, PTO clutches and shafts, both 2WD and 4WD front axle assemblies including Carraro variants, hydraulic control casings and auxiliary distributors, electrical harnesses and instrument panels, body panels, and the complete cab from mountings and glazing through to seats and mirrors.

Instant PDF delivery

The Massey Ferguson 6497 6499 parts catalog is supplied as a PDF you can download immediately after payment – no shipping, no waiting for a parcel. Keep it on a workshop computer, a laptop, a tablet or a phone, print the pages for the assembly you are working on, or print the whole catalog for the shelf. Either way, the Massey Ferguson 6497 6499 parts catalog PDF with the 1637445M5 illustrations and part number lists stays on hand exactly when you need to confirm a part before ordering.