Massey Ferguson EU Harvesting MF 7344 Combine Operator’s Manual – PDF DOWNLOAD

Description

Massey Ferguson EU Harvesting MF 7344 Combine Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson EU Harvesting MF 7344 Combine Operator’s Manual – PDF DOWNLOAD

MF 7344 – S/N => 551620001

Introduction :

• Your new self-propelled combine is manufactured for harvesting seed and cereal crops, for threshing, separating, cleaning and conveying the grain into the tank and depositing the straw оп the ground. This Operator’s Manual should Ье used as а practical reference guide: lt contains all the necessary practical information for the operation, adjustment and maintenance of your new machine.
• Your combine was designed and built to ensure optimum performance, comfort and ease-of-operation in а wide variety of crops and conditions. The combine has been thoroughly inspected prior to delivery both at the factory and Ьу your Dealer, to ensure you receive it in perfect condition. То keep the comЬine in perfect condition and to ensure trouЫe-free performance, the periodical maintenance operations listed in this manual should Ье carried out at the recommended intervals.
• Before operating and/or driving the comblne, read this Operator’s Manual carefully, paying particular attention to the section оп safety rules. Always keep this manual оп hand for further reference. The terms “left” and “right” are always used with reference to the machine traveling direction. Should you require further information about the machine, please do not hesitate to contact your authorized Dealer. Your Dealer provides specially trained personnel, genuine spare parts and the required tools to solve any proЫems that may arise.

Spare parts and accessories :

• The genuine sраге parts and accessories have Ьееп specifically designed fог this type of machine. Only genuine parts supplied Ьу уоuг authorized Dealer сап guarantee соггесt operation and optimum регfогmапсе. Never use non-genuine sраге parts ог accessories: Some accessories (e.g. РТО shafts, straw choppers, taЫes) require ап ЕС certification, which сап Ье provided only Ьу the manufacturer ог his qualified and recognized sub-suppliers.
• Non-genuine sраге parts have not Ьееп tested and аге not authorized Ьу the manufacturer. The use of such equipment may have а damaging effect оп the design features of the machine and may even jeopardize operational safety. The manufacturer disclaims all liabllity in the event of loss or damage arising as а result of nongenuine parts or accessories being fitted. lt is expressly prohibited to make апу modification to the combine without the ргiог written authorisation Ьу the manufacturer. When ordering sраге parts and/or optional equipment, always quote уоuг comЬine model and serial number (see chapter Comblne identification).

TABLE OF CONTENTS:

Massey Ferguson EU Harvesting MF 7344 Combine Operator’s Manual – PDF DOWNLOAD

1 General lnformation 13
1 1 lnformation 15
1 1 1 lntroduction 1 5
1 1 2 Company policy 1 5
1 1 3 Optional equipment 1 5
1 1 4 Spare parts and accessories 1 6
1 1 5 Warranty 1 6
1 1 6 Lubricants 1 6
1 2 Use 18
1 2 1 Use of the combine 1 8
1 3 Trailer hitch 19
1 3 1 ComЬine identification 19
1 3 2 Engine ldentification 20
1 3 3 Cutting tаЫе identification 2 1
1 3 4 СаЬ identification 2 1
1 3 5 Hydrostatic pump identification 2 2
1 3 6 Hydrostatic motor identification 2 2
1 3 7 Straw chopper identification (if fitted) 2 3
1 3 8 Chaff spreader identification (if fitted) 2 3
1 3 9 Trailer hitch identification (if fitted) 2 4
1 4 ldentification plate 25
1 4 1 Machine data 2 5
1 5 Conformity 26
1 5 1 ЕС Declaration of Conformity 2 6
1 6 lnformation 2 7
1 6 1 Ecology 2 7
1 6 2 Hydraulic systems: hoses 27
1 6 3 Scrapping and disposal 2 8
1 7 Weight 29
1 7 1 Weight distribution 29
2 Safety 31
2 1 Warning symbols and safety instructions 33
2 1 1 Warnings 3 3
2 2 lnformation for road transport 34
2 2 1 Road transport 3 4
2 3 lnformation for operations 37
2 3 1 Field Operations 3 7
2 4 lnformation for maintenance 41
2 4 1 Maintenance work 4 1
2 5 lnformation оп the engine 45
2 5 1 Engine 4 5
2 6 Safety and function decals 49
2 6 1 Location of decals 49
2 6 2 Description of decals 53
2 7 Work оп the battery 6 4
2 7 1 Battery 6 4
2 8 Safety devices 65
2 8 1 Emergency exit 6 5
СотЬiпе Harvester
MF 7344_EN_LA327433010
ТаЬ/е of contents
2 8 2 Орегаtог presence device 6 6
2 8 2 1 Returning the machine to normal operation 6 7
2 8 3 Safety belts 6 8
2 8 4 Cutting tаЫе safety stops 69
2 8 5 Safety guard fог main сгор elevator 7 0
2 8 6 Sprags fог wheels 7 0
2 8 7 AudiЫe alarm fог reversing 7 1
2 8 8 Reflectors fог гоаd transport 7 2
2 8 9 Safety Guards 7 3
2 8 1 О Fall protection rails 7 3
2 8 1 1 Safety devices fог operations to Ье саггiеd out in the uррег рагt of the machine 7 4
2 8 1 2 Stгaw Сhоррег (if fitted) 7 5
2 8 1 3 Fire extinguisher 7 5
2 9 Trailer hitch 76
2 9 1 Automatic trailer hitch 7 6
2 9 2 CUNA and СЕ trailer hitches 7 7
2 9 2 1 Ргосеduге fог attaching and removing 7 8
2 9 2 2 DгаwЬаг coupling 79
2 9 3 ROCKINGER trailer hitch 79
2 9 3 1 Removal 79
2 9 3 2 DгаwЬаг coupling 8 0
2 9 4 Fixed trailer hitch (non-automatic – CUNA type) 8 1
2 1 О Machine lifting 82
2 10 1 Attachment points 8 2
2 11 Towing 83
2 1 1 1 Towing the combine 8 3
2 12 Further information 84
2 1 2 1 Noise level in the саЬ 8 4
2 1 2 2 Vibrations in the саЬ 8 4
2 1 2 3 Statutoгy regulations 8 4
2 1 2 4 Electromagnetic emissions 8 5
2 13 Notes 86
2 1 3 1 Notes fог гоаd transport 8 6
3 Operation 89
3 1 Comblne operation 91
3 1 1 Сгор processing 9 1
3 2 Stage 1 92
3 2 1 Feeding 9 2
3 3 Stage 2 93
3 3 1 Threshing 9 3
3 4 Stage 3 94
3 4 1 Separation 9 4
3 5 Stage 4 95
3 5 1 Cleaning 9 5
3 6 Stage 5 96
3 6 1 Grain storage and unloading 9 6
4 Controls and lnstruments 97
4 1 Steering column 99
4 1 1 Components and adjustments 99
4 2 Multifunction lever 1 оо
4 2 1 Main components 10 0
4 3 lnstrument panel 102
4 3 1 Front control panel 10 2
СотЬiпе Harvester
MF 7344_EN_LA327433010
ТаЬ/е of contents
4 3 2 Rеаг control panel 10 3
4 4 Controls at the operator seat 11 о
4 4 1 Description 1 1 О
4 5 Agritronicplus 111
4 5 1 Components 1 1 1
4 5 2 Multiple light indicators 1 1 2
4 5 3 On-board Computer 1 1 4
4 5 3 1 Using the computer 1 1 6
4 5 3 2 Scheduled service inspection hours 1 1 6
4 5 3 3 Resetting partial ог total hectare counter 1 1 7
4 5 3 4 Calibrating constants used fог calculating covered агеа 1 1 7
4 5 3 5 С6: Working width 1 18
4 5 3 6 С2 : Forward speed 1 18
4 5 3 7 ТаЫе of constants 1 19
4 5 3 8 Partial hectare counter 1 2 0
4 5 3 9 Несtаге counter operation 1 2 0
4 5 3 1 О Activation of the audiЫe alarm 1 2 1
4 5 4 Performance monitor 1 2 2
4 5 4 1 Using the monitor 1 2 3
4 5 4 2 Selecting the measurement range (straw walker, sieves ог total) 1 2 3
4 5 4 3 Calibrating the Ьаг сuгsог scale 1 2 4
4 5 4 4 Sensitivity adjustment 1 2 4
4 5 4 5 Shifting to forward speed monitoring 1 2 5
4 5 4 6 Summary of keyboard functions 1 2 5
4 5 5 Тегга Control System 1 2 6
4 5 5 1 Using Тегга Control 1 29
4 5 5 2 Тегга Control sensitivity 1 3 1
4 5 5 3 Adjusting the potentiometer fог tаЫе floatation 1 3 2
4 5 5 4 Adjusting the potentiometer fог main сгор elevator height control 1 3 5
4 6 СаЬ 138
4 6 1 СаЬ controls 1 38
4 6 2 Орегаtог seat 1 4 2
4 6 3 Passenger seat 1 4 3
4 6 4 Footrest 1 4 3
4 6 5 Preparation fог radio installation 1 4 4
4 6 6 Reading light 1 4 4
4 6 7 Аiг conditioning in the саЬ 1 4 5
4 6 8 Heating 1 4 7
4 7 Access to comblne components 148
4 7 1 Access to the орегаtог platform 1 4 8
4 7 2 Accessing and cleaning the front windscreen of the саЬ 1 4 9
4 7 3 Access to the engine compartment 1 5 0
4 7 4 Access to the grain tank 1 5 1
4 7 5 Access to the inside of the grain tank 1 5 2
4 8 Engine 153
4 8 1 Starting the engine 1 5 3
4 8 2 Useful advice 1 5 3
4 8 3 Stopping the engine 1 5 4
4 9 Road transport 156
4 9 1 Operations to Ье саггiеd out Ьеfоге transportation 1 5 6
4 9 2 Position light and sidelight adjustment 1 5 7
4 10 Using the comblne 158
4 10 1 Operations to Ье саггiеd out Ьеfоге use 1 5 8
5 Field Operations 159
5 1 General lnformation 161
СотЬiпе Harvester
MF 7344_EN_LA327433010
ТаЬ/е of contents
5 1 1 Notes 1 6 1
5 1 2 Веfоге operating the machine in the field 1 6 1
5 2 Starting and Stopping the Comblne 163
5 2 1 Ргосеduге to follow 1 6 3
5 3 Cutting tаЫе 165
5 3 1 Attaching and removing the tаЫе 1 6 5
5 3 2 ТаЫе lateral floatation (optional) 1 6 9
5 3 3 Gгound self-alignment system (optional) 1 7 1
5 4 Main Crop Elevator 172
5 4 1 Adjustments 1 7 2
5 4 1 1 Access to the main components 1 7 4
5 4 2 Reverse drive system 1 7 5
5 5 Cylinder Housing 176
5 5 1 Components 1 7 6
5 5 2 Threshing drum 1 7 7
5 5 3 Concave 179
5 5 3 1 Concave filler plates 180
5 5 3 2 Parallelism between the cylinder and concave 18 1
5 5 3 3 UnЫocking the cylinder 18 2
5 5 3 4 Universal wheat/maize concave 18 3
5 5 3 5 Basic concave settings 18 4
5 5 3 6 Spike-toothed Cylinder/Concave (fог гiсе) 18 4
5 5 4 Rеаг Ьеаtег 18 6
5 6 Straw walkers 187
5 6 1 Description and adjustments 18 7
5 7 Main Grain Рап 188
5 7 1 Description 188
5 7 2 Checking the main grain рап 189
5 7 3 Cleaning the main grain рап 190
5 7 4 Stone tгар assemЬly removal/refitting 19 1
5 8 Fanning Mill 193
5 8 1 Description and adjustments 19 3
5 8 1 1 Fanning mill fог threshing light seed сгорs 19 5
5 9 Тор sieve 196
5 9 1 Adjustment 19 6
5 1 О Bottom sieve 200
5 10 1 Adjustment 2 00
5 11 Returns 202
5 1 1 1 Description and adjustments 2 0 2
5 12 Grain tank 204
5 12 1 Description 2 0 4
5 12 1 1 Grain tank unloading auger 2 0 5
5 12 1 2 Sensors to check tank filling 2 0 6
5 12 1 3 Gгain tank control window 2 0 7
5 12 1 4 Doors fог Gгain Tank Maintenance and Cleaning 2 0 7
5 12 1 5 Vertical auger tank drain dоог 2 09
5 1 2 1 6 Tank bottom dоог 2 09
5 1 2 1 7 Gгain tank соvег 2 1 1
5 1 2 1 8 Basic Settings 2 1 2
6 Lubrication and Maintenance 215
6 1 General lnformation 217
6 1 1 Lubrication and Maintenance 2 1 7
6 2 Preliminary Service lnspection 219
6 2 1 After the first 5 0 working hours 2 19
СотЬiпе Harvester
MF 7344_EN_LA327433010
6 3
ТаЬ/е of contents
Scheduled Service lnspection 220
6 3 1 Operation and adjustment 220
6 3 2 When and where to саггу it out 222
6 3 3 lnterval – 1О hours 224
6 3 3 1 Cylinder variator (1) 224
6 3 3 2 Engine oil (2) 225
6 3 3 3 Coolant expansion tank (3) 226
6 3 3 4 Hydraulic and hydrostatic systems tank (4) 226
6 3 3 5 Prefilter/water separator (5) 227
6 3 3 6 Straw chopper rotor (if fitted) (6) 227
6 3 4 lnterval – 7 5 hours (Sa) 228
6 3 4 1 Service brakes (7) 228
6 3 4 2 Main сгор elevator belt tensioner (9) 228
6 3 4 3 Fanning mill variator (1О ) 229
6 3 4 4 Belt tensioner for сгор unloading auger (11) 230
6 3 4 5 Coupling bushes of final drive shafts (12) 230
6 3 4 6 Rear axle support (13) 23 1
6 3 4 7 Rear axle king pins (14) 23 1
6 3 4 8 Rear wheel 4WD tie rod (if fitted) (14) 232
6 3 4 9 Bearings for геаг straw walker crank (15) 232
6 3 4 1О Bottom angle gear for unloading auger (16) 23 3
6 3 4 11 Тор angle gear for unloading auger (17) 23 3
6 3 4 12 ТаЫе belt tensioner (18) 23 4
6 3 4 13 Angle gear at tank filling elevator (19) 23 4
6 3 4 14 Track frames (20) 23 5
6 3 4 15 СаЬ air filters (21) 23 5
6 3 4 16 Evaporator (22) 23 7
6 3 4 17 Condenser (23) 23 7
6 3 4 18 Radiator and hydraulic oil (24) 23 8
6 3 4 19 Adjusting the rotary screen brushes and aspirator brushes 23 9
6 3 4 20 Main сгор elevator adapter (with lateral floatation fitted) (25) 240
6 3 4 21 Chaff spreader drive (if fitted) (26) 24 1
6 3 5 lnterval – 150 hours (SЬ) 24 1
6 3 5 1 Park brake (27) 24 1
6 3 5 2 Gearbox (28) 242
6 3 5 3 Reduction gear housings (29) 242
6 3 5 4 Bottom angle gear for unloading auger (30) 24 3
6 3 5 5 Main сгор elevator supports (3 1) 24 3
6 3 5 6 Reversing belt tensioner arm pin (3 2) 24 4
6 3 5 7 Main clutch (3 3) 24 4
6 3 5 8 Left bearing for tailings auger (3 4) 24 5
6 3 5 9 Windscreen wash fluid tank (3 5) 24 5
6 3 5 1О Threshing unit belt tensioner (3 6) 24 6
6 3 5 11 Hydrostatic pump belt tensioner (3 7) 24 6
6 3 5 12 Bottom ring nut for unloading auger (3 8) 24 7
6 3 5 13 Engine air filter (3 9) 24 8
6 3 5 14 Driven belt tensioner for straw chopper (40) 24 9
6 3 5 15 Drive belt tensioner for straw chopper (4 1) 24 9
6 3 5 16 Engine (42) 24 9
6 3 5 17 СаЬ access ladder (4 3) 25 1
6 3 5 18 Straw chopper layshaft (4 4) 25 1
6 3 5 19 Belt tensioner for return rotary screen (4 5) 252
6 3 5 20 Rotary screen belt tensioner (4 6) 252
6 3 6 lnterval – 225 hours (Sa + engine) 252
6 3 6 1 Engine oil and filters (5 1) 252
6 3 7 lnterval – 4 50 hours (Sc) 25 6
6 3 7 1 Battery (5 8) 25 6
6 3 7 2 Dehydrator filter (5 9) 25 7
СотЬiпе Harvester
MF 7344_EN_LA327433010
ТаЬ/е of contents
6 3 7 3 Reduction gear housings (6 0) 2 5 8
6 3 7 4 Gearbox (6 1) 2 5 8
6 3 7 5 Hydraulic oil intake filter (6 2) 2 5 9
6 3 7 6 Filter, hydrostatic transmission (6 3) 2 6 0
6 3 7 7 Hydraulic systems oil (6 4) 2 6 1
6 3 7 8 Hydraulic апd hydrostatic system return filter (6 5) 2 6 2
6 3 7 9 Air compressor (if fitted) (6 6) 2 6 3
6 3 7 1 О Engine diesel oil filter (6 7) 2 6 3
6 3 7 1 1 Catalytic fluid filter (6 8) 2 6 5
6 4 Periodical maintenance operations 266
6 4 1 Description 2 6 6
6 4 1 1 Engine valves (1) 2 6 7
6 4 1 2 Coolant (2) 2 6 8
6 4 1 3 Service brake circuit fluid (3) 2 69
6 4 1 4 Diesel fuel tank (4) 2 69
6 4 1 5 Turbocharger (5) 2 7 0
6 4 1 6 Hydraulic hoses (6) 2 7 0
6 5 Lubrication 271
6 5 1 Summary tаЫе 2 7 1
7 Adjustments 273
7 1 Adjustments 275
7 1 1 lmportant information 27 5
7 2 Belt and chain adjustment 276
7 2 1 Belts апd chains (left-hand side) 2 7 6
7 2 1 1 Feeder drive belt (1) 2 7 7
7 2 1 2 Belt drive for threshing unit (2) 2 7 8
7 2 1 3 Belt drive for unloading auger (3) 2 79
7 2 1 4 Belt drive for air compressor (if fitted) (4) 2 8 0
7 2 1 5 Belt drive for hydrostatic pump (5) 2 8 1
7 2 1 6 Belt drive for chaff spreader (if fitted) (6) 2 8 2
7 2 1 7 Belt drive for reversing (7) 2 8 3
7 2 1 8 Маiп transmission belt (8) 2 8 3
7 2 1 9 Belt drives for good grain апd tailings augers (9) 2 8 4
7 2 1 1 О Belt drive for straw walkers (1 О) 2 8 4
7 2 1 1 1 Belt drive for cutting tаЫе (1 1) 2 8 5
7 2 1 1 2 Chain drive for unloading auger (1 2) 2 8 5
7 2 1 1 3 Belt drive for straw chopper (if fitted) (1 3) 2 8 6
7 2 1 1 4 Belt drive for straw chopper (if fitted) (1 4) 2 8 6
7 2 2 Belts апd chains (right-hand side) 2 8 7
7 2 2 1 Belt drive for rotary sсгееп (2 1) 2 8 7
7 2 2 2 Counter drive for rotary sсгееп (2 2) 2 8 8
7 2 2 3 Belt drive for engine coolant pump (2 3) 2 8 8
7 2 2 4 Belt drive for alternator апd cooling fап (2 4) 2 89
7 2 2 5 Belt drive for cylinder variator (2 5) 2 89
7 2 2 6 Belt drive for fanning mill variator (2 6) 290
7 2 2 7 Тор chain drive for tailings auger (2 7) 29 1
7 2 2 8 Сгор elevator chain (2 8) 29 1
7 2 2 9 Chain drive for tailings elevator (29) 29 2
7 2 2 1 О Front сгор elevator chain (30) 29 2
7 2 2 1 1 Chain drive for tank filling auger (3 1) 29 3
7 2 2 1 2 Belt drive for reel pump (3 2) 29 3
7 2 2 1 3 Belt drive for саЬ air conditioning compressor (3 3) 29 4
7 2 2 1 4 Belt drive for dust aspirator (3 4) 29 5
7 3 Slip clutches 296
7 3 1 Description 2 9 6
7 3 1 1 Clutch for main сгор elevator upper shaft (1) 2 9 6
СотЬiпе Harvester
MF 7344_EN_LA327433010
ТаЬ/е of contents
7 3 1 2 Clutch for shaker shoe counter drive (2) 296
7 3 1 3 Shear bolt for unloading auger counter drive (3) 297
7 4 Tires 298
7 4 1 Tire pressure 298
7 4 2 Replacement of Front Wheels 299
7 4 3 Replacement of Rear Wheels 300
7 4 4 Front wheel assemЬly 30 1
7 4 5 Rear wheel assemЬly 30 2
7 5 Brakes 303
7 5 1 Service brakes 30 3
7 5 2 Park brake 30 4
7 6 Rear axle 305
7 6 1 Toe-in setting 30 5
7 6 2 Steering ram ball joints 30 5
7 6 3 AdjustaЫe rear axle 306
7 6 4 Rear axle support 307
7 7 Battery 308
7 7 1 Battery Replacement 308
7 7 2 Suggestions regarding the battery 308
7 7 3 lndicator Light for Battery Charging 309
8 Systems 311
8 1 Safety Precautions 313
8 1 1 Notes 3 1 3
8 2 Engine supply system 314
8 2 1 Permitted fuels 3 1 4
8 2 2 Fuel Circuit 3 1 4
8 2 3 Bleeding the Fuel Supply Circuit 3 1 6
8 2 4 Catalytic fluid tank (DEF) 3 1 6
8 2 5 lnjection system operation 3 18
8 3 Engine air intake and exhaust system 319
8 3 1 Operation 3 19
8 4 Engine cooling system 321
8 4 1 Coolant 3 2 1
8 4 2 Engine cooling system operation 3 2 2
8 5 Engine lubrication system 323
8 5 1 Operation 3 2 3
8 5 2 Oil vapor recovery system 3 2 4
8 6 SCR system 325
8 6 1 Operation 3 2 5
8 7 Hydraulics system 327
8 7 1 Pumps and fuel tank 3 2 7
8 7 2 ТаЫе positioning hydraulic circuits 3 29
8 7 2 1 Cutting tаЫе oleopneumatic shock absorbers 3 30
8 7 2 2 Flow limiting solenoid valve 3 30
8 7 2 3 Hose burst valve 3 3 1
8 7 2 4 ТаЫе horizontal positioning circuit (optional) 3 3 1
8 7 3 Reel rotation control hydraulic circuit 3 3 2
8 7 4 Hydraulic steering system 3 3 3
8 7 5 Auxiliary hydraulics circuit 3 3 4
8 8 Hydrostatic transmission system 335
8 8 1 Front-wheel drive 3 3 5
8 8 2 Rear-wheel drive (optional) 3 3 6
8 9 Electrical system 337
8 9 1 Main components 3 3 7
СотЬiпе Harvester
MF 7344_EN_LA327433010
ТаЬ/е of contents
8 9 2 Fuses 3 38
8 9 3 Additional fuses 3 4 1
8 9 4 СаЬ fuses 3 4 4
8 9 5 Relays 3 4 5
8 9 5 1 Additional relays 3 4 6
8 9 5 2 Various relays 3 4 7
8 9 6 Control units 3 4 9
8 9 6 1 Engine sensors and control unit 3 5 0
8 9 7 Connections fог additional equipment 3 5 1
8 9 7 1 Electric connectors 3 5 1
8 9 8 Headlight adjustment 3 5 3
9 TrouЫeshooting 355
9 1 Description 357
9 1 1 Feeding 3 5 7
9 1 2 Threshing 3 5 7
9 1 3 Separation and cleaning 3 5 9
9 1 4 Hydrostatic Transmission 3 6 2
9 1 5 Engine 3 6 3
9 1 6 Hydraulics system 3 6 5
9 1 7 Electrical system 3 6 6
9 1 8 Аiг conditioning circuit 3 6 7
9 1 9 Straw сhоррег 3 6 7
1 0 Off-Season Storage 371
1 0 1 Procedure to follow 373
10 1 1 Operations to Ье саггiеd out after the harvest 3 7 3
10 1 2 Ordering sраге parts 3 7 4
10 1 3 Operations to Ье саггiеd out Ьеfоге the new season 3 7 4
1 1 Optional equipment 377
1 1 1 lnformation 379
1 1 1 1 General considerations 3 79
1 1 2 Optional equipment 380
1 1 2 1 Auxiliary tаЫе lifting гаm 3 8 0
1 1 2 2 Four-wheel drive 38 1
1 1 2 3 Саmега 38 1
1 1 2 4 Windbreak 38 2
1 1 2 5 Additional lights and miггогs 38 2
1 1 2 6 Electrically operated straw сhоррег straw deflectors 38 3
1 1 2 7 Additional fire extinguisher 38 3
1 1 2 8 Diesel fuel filter 38 4
1 1 2 9 Аiг compressor 38 4
1 1 2 1 О Additional РогtаЫе Lamp 38 5
1 1 2 1 1 Weight and moisture control monitor 38 5
1 1 2 1 2 Тгаilег hitch 38 6
1 1 2 1 3 Refrigerator 38 6
1 1 2 1 4 Lateral floatation 38 7
1 1 2 1 5 Vertical Knifes 38 7
1 1 2 1 6 Electrically-operated sieves and returns sensors 388
1 1 2 1 7 Cylinder соvег 389
1 1 2 18 Tailings соvег plate 389
1 1 2 19 Тор sieve 390
1 1 2 2 0 Bottom sieve 39 1
1 1 З Equipment for threshing 392
1 1 3 1 Equipment fог maize 39 2
1 1 3 2 Equipment fог согп-соЬ 39 3
СотЬiпе Harvester
MF 7344_EN_LA327433010
ТаЬ/е of contents
1 1 3 3 Equipmeпt for rice 39 4
1 1 3 4 Equipmeпt for light seed crops 39 4
1 1 3 5 Equipmeпt for soya апd peas 39 5
11 4 Ballast weights 396
1 1 4 1 Descriptioп 396
1 1 4 2 Ballast weights оп rear axle 39 7
1 1 4 3 Ballast weights оп the straw walker hood for machiпes without straw chopper 398
1 1 4 4 Ballast weights оп the rear wheels with а liquid mix (for tubeless tires) 399
1 1 4 5 Filliпg tires with aпti-freeze solutioпs 4 00
11 5 Straw chopper 40 1
1 1 5 1 Traпsport positioпs 4 0 1
1 1 5 2 Workiпg positioп 4 0 2
1 1 5 3 Operatiпg the straw chopper 4 0 3
1 1 5 4 Diseпgagiпg the straw chopper 4 0 5
1 1 5 5 Access to the straw chopper rotor 4 0 5
1 1 5 6 Straw chopper rotor kпives 4 0 5
1 1 5 7 Couпter-kпives 4 0 6
1 1 5 8 Choppiпg quality 4 0 6
1 1 5 9 Use of straw chopper iп maize 4 08
11 6 Chaff Spreader 41 о
1 1 6 1 Workiпg апd mаiпtепапсе positioпs 4 1 О
1 1 6 2 Chaff spreader speed 4 1 2
1 1 6 3 Diseпgagiпg the chaff spreader 4 1 2
1 1 6 4 Chaff spreader belt teпsioпiпg 4 1 2
11 7 Tracks 4 1 3
11 7 1 Use апd mаiпtепапсе 4 1 3
1 1 7 2 Track chaiп teпsioп 4 1 4
12 Technical Specifications 4 1 5
12 1 Wheels and tires 4 1 7
1 2 1 1 iпformatioп 4 1 7
1 2 1 2 Wheel tighteпiпg torque 4 1 7
1 2 1 3 Tire capacity 4 1 7
1 2 1 4 Tire equipmeпt- froпt axle 4 18
1 2 1 5 Tire equipmeпt – rear axle 4 19
1 2 1 6 Tire equipmeпt – Versioп with half-tracks оп froпt axle 4 2 0
1 2 1 7 Ballast weights 4 2 1
12 2 Dimensions 422
1 2 2 1 СоmЬiпе dimeпsioпs 4 2 2
1 2 2 2 Tracks with ruппers 4 2 4
1 2 2 3 Clearaпce betweeп uпloadiпg auger апd tаЫе 4 2 5
1 2 2 4 Clearaпce betweeп uпloadiпg auger апd grouпd 4 2 6
12 З Technical specifications 427
1 2 3 1 Feediпg uпit 4 2 7
1 2 3 2 Threshiпg sys 4 2 7
1 2 3 3 Cleaпiпg uпit 4 2 9
1 2 3 4 Graiп taпk 4 30
1 2 3 5 Hydraulic system 4 30
1 2 3 6 Hydrostatic system 4 3 1
1 2 3 7 Епgiпе 4 3 1
1 2 3 8 Electrical compoпeпts 4 3 2
1 2 3 9 Traпsmissioп 4 3 2
1 2 3 1 О Rear axle 4 3 3
1 2 3 1 1 Weight 4 3 3
13 lndex 435

MASSEY FERGUSON EU HARVESTING MF 7344 COMBINE OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V