Massey Ferguson EU Tractor MF 5700 S Series 5709 5710 5711 5412 S Dyna-4 Dyna-6 Operator’s Manual

Description

Massey Ferguson EU Tractor MF 5700 S Series 5709 5710 5711 5412 5713 S Dyna-4 Dyna-6 Operator’s Manual

DESCRIPTION:

Massey Ferguson EU Tractor MF 5700 S Series 5709 5710 5711 5412 5713 S Dyna-4 Dyna-6 Operator’s Manual

MF 5700 S – Operation
Version Deluxe
MF 5709 S
MF 5710 S
MF 5711 S
MF 5712 S
MF 5713 S

Dyna-4 – Dyna-6
ACT0041590

Introduction – Safety instructions :

Operator’s Manual :

The purpose of this manual is to enable the owner and the operator to operate the tractor appropriately under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many years of service in the Massey Ferguson tradition. Use for any other activity (particularly forestry work) is considered to be contrary to the intended use. The commissioning of equipment by the Massey Ferguson dealer on the user’s premises enables the dealer to ensure that these operating and service instructions are properly understood.

• Always consult the Massey Ferguson dealer if there is any part of this manual that you do not understand. It is important that these instructions are understood and followed. This manual does not cover all operation and safety instructions relevant to the implements and accessories that may be fitted at the time of tractor delivery or later. It is essential that operators use and understand the Operator’s Manuals relating to these implements and accessories. IMPORTANT: This manual must always be kept with the tractor. For extra copies, contact your Massey Ferguson dealer.
• This chapter in the Operator’s Manual highlights certain basic safety-related situations that may be encountered during normal operation and servicing of the tractor and provides the information needed to handle these situations. This chapter supplements any safety instructions given in other chapters of this manual. It may be necessary to take additional precautions, depending on the implements and accessories used and the working conditions on-site or in the service area. Massey Ferguson can under no circumstances exercise direct control over the commissioning, operation, inspection, lubrication or servicing of the tractor. It is therefore YOUR responsibility to take suitable safety precautions in such areas.

TABLE OF CONTENTS:

Massey Ferguson EU Tractor MF 5700 S Series 5709 5710 5711 5412 5713 S Dyna-4 Dyna-6 Operator’s Manual

1 Tractor identification 11
1 1 Locating serial numbers 13
1 1 1 Locating serial numbers 1 3
1 2 Your tractor identification details 14
1 2 1 Your tractor identification details 14
2 Safety instructions and safety points – Warranty 15
2 1 Introduction 17
2 1 1 Introduction – Safety instructions 17
2 2 Safety – Symbols and terms 19
2 2 1 Safety – Symbols and terms 19
2 3 Safety decals and instructions 20
2 3 1 Checking and replacing the safety decals and instructions 2 0
2 3 2 Presentation and location of the safety decals and instructions 2 1
2 4 General safety instructions 26
2 4 1 Awareness of the safety instructions and symbols 2 6
2 4 2 Operator familiarity in the use of the tractor 2 6
2 4 3 Filling the fuel tank 2 7
2 4 4 Mounting and dismounting the operator’s seat 2 7
2 4 5 Mandatory procedure before dismounting the tractor 2 8
2 5 Special safety instructions for preparing the tractor for use 29
2 5 1 Protective clothing 2 9
2 5 2 Activated carbon filter information 2 9
2 5 3 Safety devices and items 3 2
2 5 4 Checking the tractor 3 2
2 6 Specific safety instructions for starting the tractor 34
2 6 1 Protection of persons other than the operator 3 4
2 6 2 Start up safely 3 4
2 6 3 Starting the tractor with jump start cables 3 5
2 6 4 Checks to be carried out after start-up 3 6
2 7 Specific safety instructions for using the tractor 37
2 7 1 General instructions 3 7
2 7 2 Protection of persons other than the operator 3 8
2 7 3 Overturning 3 8
2 7 4 Tractor towing 4 1
2 7 5 Regulatory data on maximum permitted trailed weights 4 1
2 7 6 Road use 4 3
2 7 7 Instructions and Legislation for the Towing of Implements 4 4
2 7 8 Parking brake 4 5
2 7 9 Power take-off 4 5
2 7 10 Implements 4 6
2 7 11 Front-end loader 4 8
2 8 Specific safety instructions for servicing the tractor 50
2 8 1 Pollution warning to observe when servicing the tractor 5 0
2 8 2 General instructions 5 0
2 8 3 Handling instructions 5 1
2 8 4 Special instructions for cleaning the tractor 5 2
2 9 Protective structures 54
2 9 1 Protective structures – Use and accreditation 5 4
2 9 2 Cab 5 4
MF 5700 S – Operation
ACT0041590
Table of contents
2 9 3 Seat belt 5 4
2 9 4 Instructor seat 5 5
2 10 Warranty 56
2 10 1 General 5 6
2 10 2 Pre-delivery inspection and commissioning on the user’s premises 5 6
2 10 3 Warranty procedure 5 6
2 10 4 Procedure to follow if changing region 5 6
2 10 5 Servicing during and after the warranty period 5 7
2 10 6 California emission control warranty statement 5 7
2 10 7 United States and Canada emission control warranty statement 60
3 Operation 65
3 1 Standard cab 69
3 1 1 Steering console 6 9
3 1 2 Instrument panel 70
3 1 3 Control unit 7 7
3 1 4 Pedals 7 7
3 1 5 Steering wheel 78
3 1 6 Operator presence detector 78
3 1 7 Automatic adjustment pneumatic seat 8 2
3 1 8 Instructor seat 8 8
3 1 9 Right-hand console 8 9
3 1 10 Command Control Armrest 8 9
3 1 11 Right-hand pillar 9 2
3 1 12 Left-hand console 9 3
3 1 13 Upper console 9 4
3 1 14 Manual air conditioning 9 6
3 1 15 Automatic air conditioning 10 1
3 1 16 Additional heater 10 7
3 1 17 Accessories sockets 10 8
3 1 18 Emergency exits 10 8
3 1 19 Sun visor 10 9
3 1 2 0 Roof hatch 10 9
3 1 2 1 Wheel chock(s) (optional) 111
3 2 Control screens on the instrument panel 113
3 2 1 Using the Setup and Information Screen 113
3 2 2 Setup and Information screens 115
3 3 Body 123
3 3 1 Opening the bonnet 12 3
3 3 2 Adjusting the external rear-view mirrors 12 3
3 3 2 1 Positioning the arms 12 3
3 3 2 2 Adjusting the arm extensions (depending on model) 12 4
3 3 2 3 Adjusting the rear-view mirrors (depending on model) 12 4
3 3 2 4 Manual adjustment of the rear-view mirror with an electric control 12 4
3 3 3 Adjusting the double-angle rear-view mirror 12 5
3 3 3 1 Positioning and extending the arms 12 5
3 3 3 2 Rear-view mirror with manual adjustment 12 5
3 3 3 3 Rear-view mirror with electric adjustment 12 6
3 3 4 Adjusting the step 12 6
3 4 Engine 128
3 4 1 Running-in 12 8
3 4 2 Filling with fuel 12 8
3 4 3 Start switch 1 3 0
3 4 4 Start-up 1 3 0
3 4 5 Starting the SCR Technology engine in cold weather 1 3 1
3 4 6 Information on the different operating modes of the SCR Technology 1 3 3
3 4 7 Stopping the engine 1 3 8
3 4 8 Engine speed 1 3 8
3 4 9 Storing an engine speed 14 0
Transmission 142
3 5 1 Presentation of the different driving modes 14 2
3 5 2 Clutch function 14 2
3 5 3 PowerShuttle 14 3
3 5 3 1 PowerShuttle Protection Function 14 6
3 5 4 Adjusting the start ratios ( 1A , 1B , 1C etc ) 14 7
3 5 5 Starting ratio 14 8
3 5 6 Storage of transmission ratios ( 1A , 1B , 1C , etc ) 14 8
3 5 7 Lever (Speedmatching) mode 15 0
3 5 8 Pedal (AutoDrive) mode 15 2
3 5 9 Road mode (Hare)/Field mode (Tortoise) 15 4
3 5 10 Changing the transmission ratios ( 1A , 1B , 1C etc ) 15 6
3 5 11 Optional creeper range (snail) 15 6
3 5 12 Tractor towing 15 7
3 5 1 3 Forward speed calibration 15 7
Brakes 159
3 6 1 Brake pedals 15 9
3 6 2 Instructions and Legislation for the Towing of Implements 15 9
3 6 3 Hydraulic trailer brake 160
3 6 4 Pneumatic trailer brake 16 1
3 6 5 Park brake 16 2
Front axle 164
3 7 1 Four-wheel drive front axle 164
3 7 2 Suspended front axle 16 5
3 7 3 Permissible load on the front axle 167
Differential lock 168
3 8 1 Differential lock 168
3 9 Power take-off 170
3 9 1 Front power take-off 170
3 9 2 Rear power take-off (PTO) 17 1
3 9 2 1 Selecting the power take-off speed 172
3 9 2 2 Adjusting the progressivity of power-take-off engagement 172
3 9 2 3 Engaging PTO in manual mode: 17 3
3 9 2 4 Engaging PTO in automatic mode: 17 3
3 9 3 Economy PTO 174
3 9 4 GSPTO (optional) 17 5
3 9 5 Changing the flanged shaft 17 5
3 9 6 PTO external control 176
3 9 7 Power take-off electronic controls 177
3 9 8 Power take-off protection 177
3 10 Linkage 179
3 10 1 General 17 9
3 10 2 Rear linkage electronic controls 18 0
3 10 3 Rear linkage operation 18 1
3 10 4 Rear linkage external controls 186
3 10 5 General information for the front linkage 187
3 10 6 Top link 19 4
3 10 7 Bottom links 19 5
3 10 8 Lift rods 1 9 6
3 10 9 Stabilisers 1 9 7
3 10 9 1 Stabilizers with manual telescopic adjustment 19 8
3 11 Towing equipment 199
3 11 1 General 19 9
3 11 2 Swinging drawbar 2 0 1
3 11 3 Lift rod-type pickup hitch 2 0 2
MF 5700 S – Operation
ACT0041590
Table of contents
3 12 Auxiliary hydraulics 207
3 12 1 General 2 0 7
3 12 2 Description of hydraulic couplers on Open Center system 2 0 7
3 12 3 Use of hydraulic couplers on Open Center system 2 0 8
3 12 4 Description of hydraulic couplers on Closed Center system ( Load Sensing) 2 11
3 12 5 Use of hydraulic couplers on Closed Center system (Load Sensing) 2 1 3
3 12 6 Auxiliary hydraulics locking/unlocking 2 17
3 12 7 Description and use of the cab controls 2 19
3 12 8 Hydraulics control lever 2 2 1
3 12 9 Open Centre 10 0 I/min ( 2 6 4 gal/min (US)) 2 2 2
3 12 9 1 Pump coupling (combined flow) 2 2 3
3 12 9 2 Pump uncoupling 2 2 3
3 12 10 Setting flow rates and time delay 2 2 3
3 13 Front-end loader function 226
3 1 3 1 Front-end loader 2 2 6
3 1 3 2 Layout of components 2 2 7
3 1 3 3 Front-end loader connection 2 2 7
3 1 3 4 Using the electric joystick of the front-end loader 2 2 8
3 1 3 4 1 Activating the front-end loader 2 2 8
3 1 3 4 2 Joystick functions for the standard front-end loader 2 3 0
3 1 3 4 3 Floating position with the standard front-end loader 2 3 0
3 1 3 4 4 Display of front-end loader flow rates 2 3 0
3 1 3 4 5 3rd and 4th functions of the standard front-end loader 2 3 2
3 1 3 4 6 Arm suspension 2 3 3
3 1 3 4 7 Locking and unlocking accessories 2 3 3
3 1 3 4 8 Automatic shaking function for the implement 2 3 4
3 14 Lighting 235
3 14 1 Main lighting control module 2 3 5
3 14 2 Work lights module 2 3 6
3 15 Front wheels and track widths 238
3 15 1 Wheel studs 2 3 8
3 15 2 Installation points of the axle stands 2 3 8
3 15 3 Front track width: Four-wheel drive front axle 2 3 9
3 15 4 Adjusting the 4WD front axle stops 2 4 1
3 15 4 1 Fitting the oscillation stops 2 4 2
3 15 4 2 Adjusting the steering angle 2 4 2
3 15 4 3 Toe-in check 2 4 2
3 15 4 4 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments are possible) 2 4 3
3 15 4 5 Adjusting the front fenders Shoe side adjustment on the front axle 2 4 3
3 15 4 6 Adjusting the front fenders Adjusting the height of the support on the
shoe 2 4 3
3 15 5 Tires 2 4 4
3 15 6 Tire pressures 2 4 4
3 16 Rear wheels and track widths 245
3 16 1 Wheel studs 2 4 5
3 16 2 Installation points of the axle stands 2 4 5
3 16 3 Rear track width with flanged shafts 2 4 6
3 17 Dual wheels 25 1
3 17 1 Dual wheels 2 5 1
3 18 Ballast 253
3 18 1 Liquid ballasting 2 5 3
3 18 2 Front-end weight 2 5 3
4 Technical specifications 255
4 1 General specifications 257
MF 5700 S – Operation
ACT0041590
Table of contents
4 1 1 Model MF 5 70 9 S 2 5 7
4 1 2 MF 5 7 10 S model 2 5 8
4 1 3 MF 5 7 11 S model 2 5 9
4 1 4 MF 5 7 12 S model 2 60
4 1 5 MF 5 7 1 3 S model 2 6 1
4 2 Operator environment 262
4 2 1 Noise levels (dBA) at operator’s ears 2 6 2
4 2 2 Level o f vibration felt through the seat 2 6 2
4 3 Engine 263
4 3 1 Engine specifications 2 6 3
4 3 2 Fuel system and air filter 2 6 4
4 3 3 Cooling 2 6 4
4 3 4 Tightening torques 2 6 4
4 4 Transmission 265
4 4 1 Forward speed at 2 2 0 0 rpm for all models and tire sizes 16 9R 3 4 2 6 5
4 4 2 Forward speed at 2 2 0 0 rpm for all models and 18 4 R 3 8 tires 2 66
4 4 3 Gearbox 2 67
4 4 4 Final drives 2 68
4 4 5 Rear differential lock 2 68
4 5 Brakes 269
4 5 1 Brake technical specifications 2 6 9
4 6 Front axle and steering 270
4 6 1 Four-wheel drive front axle 2 70
4 6 2 Steering 2 70
4 6 3 Tightening torques 2 7 2
4 7 Power take-off 273
4 7 1 Power take-off specifications 2 7 3
4 7 2 Tightening torques 2 7 3
4 8 Hydraulic linkage 274
4 8 1 Rear linkage 274
4 8 2 Front linkage 274
4 9 Auxiliary hydraulics (according to specification or country) 275
4 9 1 Hydraulic system 2 7 5
4 9 2 5 7 I/min ( 15 1g al/min (US)) Open Center 275
4 9 3 Open Center 10 0 I/min ( 2 6 4 gal/min (US)): (optional) 2 7 5
4 9 4 110 1/mn Closed Center 2 76
4 10 Electrical equipment 277
4 10 1 Electrical equipment technical specifications 2 77
4 11 Wheels and tires 278
4 11 1 Wheels 2 78
4 11 2 Tires 2 78
4 11 3 Tires, front/rear compatibility 2 78
4 11 4 Tightening torques 2 7 9
4 12 Capacities and dimensions 280
4 12 1 Capacities 2 8 0
4 12 2 Dimensions and weights 2 8 0
4 12 3 Attachment points 2 8 3
5 Accessories 285
5 1 Cab accessories 287
5 1 1 Cab accessories 2 87
5 2 Engine accessories 288
5 2 1 Engine accessories 2 8 8
5 3 Front axle and steering accessories 289
5 3 1 Front axle and steering accessories 2 8 9
MF 5700 S – Operation
ACT0041590
Table of contents
5 4 Power take-off accessories 290
5 4 1 Power take-off accessories 290
5 5 Linkage accessories 29 1
5 5 1 Linkage accessories 291
5 6 Auxiliary hydraulics accessories 292
5 6 1 Auxiliary hydraulics accessories 292

MASSEY FERGUSON EU TRACTOR MF 5700 S SERIES 5709 5710 5711 5412 S DYNA-4 DYNA-6 OPERATOR’S MANUAL:OF THE MANUL:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V