Massey Ferguson EU Tractor MF6700 S Series 6713S 6714S 6715S 6716S 6718S Dyna-6 Operator’s Manual

Description

Massey Ferguson EU Tractor MF6700 S Series 6713S 6714S 6715S 6716S 6718S Dyna-6 Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson EU Tractor MF6700 S Series 6713S 6714S 6715S 6716S 6718S Dyna-6 Operator’s Manual – PDF DOWNLOAD

MF 6700 S – Operation
Versions Deluxe and Premium
MF 6713 S
MF 6714 S
MF 6715 S
MF 6716 S
MF 6718 S
Dyna-6
Part. No : ACT0039950

Introduction – Safety instructions
Operator’s Manual:

• The purpose of this manual is to enable the owner and the operator to operate the tractor appropriately under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many years of service in the Massey Ferguson tradition. Use for any other activity (particularly forestry work) is considered to be contrary to the intended use. The commissioning of equipment by the Massey Ferguson dealer on the user’s premises enables the dealer to ensure that these operating and service instructions are properly understood.
• Always consult the Massey Ferguson dealer if there is any part of this manual that you do not understand. It is important that these instructions are understood and followed. This manual does not cover all operation and safety instructions relevant to the implements and accessories that may be fitted at the time of tractor delivery or later. It is essential that operators use and understand the Operator’s Manuals relating to these implements and accessories.
• This chapter in the Operator’s Manual highlights certain basic safety-related situations that may be encountered during normal operation and servicing of the tractor and provides the information needed to handle these situations. This chapter supplements any safety instructions given in other chapters of this manual. It may be necessary to take additional precautions, depending on the implements and accessories used and the working conditions on-site or in the service area. Massey Ferguson can under no circumstances exercise direct control over the commissioning, operation, inspection, lubrication, or servicing of the tractor. It is therefore YOUR responsibility to take suitable safety precautions in such areas.

TABLE OF CONTENTS:

Massey Ferguson EU Tractor MF6700 S Series 6713S 6714S 6715S 6716S 6718S Dyna-6 Operator’s Manual – PDF DOWNLOAD

1 Tractor identification 11
1 1 Locating serial numbers 13
1 1 1 Locating serial numbers 13
1 2 Your tractor identification details 15
1 2 1 Your tractor identification details 15
2 Safety instructions and safety points – Warranty 17
2 1 Introduction 19
2 1 1 Introduction – Safety instructions 19
2 2 Safety – Symbols and terms 21
2 2 1 Safety- Symbols and terms 2 1
2 3 Safety decals and instructions 22
2 3 1 Checking and replacing the safety decals and instructions 2 2
2 3 2 Presentation and location of the safety decals and instructions 2 3
2 4 General safety instructions 28
2 4 1 Awareness of the safety instructions and symbols 2 8
2 4 2 Operator familiarity in the use of the tractor 2 8
2 4 3 Filling the fuel tank 2 9
2 4 4 Mounting and dismounting the operator’s seat 2 9
2 4 5 Mandatory procedure before dismounting the tractor 3 0
2 5 Special safety instructions for preparing the tractor for use 31
2 5 1 Protective clothing 3 1
2 5 2 Activated carbon filter information 3 1
2 5 3 Safety devices and items 3 4
2 5 4 Checking the tractor 3 4
2 6 Specific safety instructions for starting the tractor 36
2 6 1 Protection of persons other than the operator 3 6
2 6 2 Start up safely 3 6
2 6 3 Starting the tractor with jump start cables 3 7
2 6 4 Checks to be carried out after start-up 3 8
2 7 Specific safety instructions for using the tractor 39
2 7 1 General instructions 3 9
2 7 2 Protection of persons other than the operator 4 0
2 7 3 Overturning 4 0
2 7 4 Tractor towing 4 3
2 7 5 Regulatory data on maximum permitted trailed weights 4 3
2 7 6 Road use 4 7
2 7 7 Instructions and Legislation for the Towing of Implements 4 8
2 7 8 Parking brake 5 0
2 7 9 Power take-off 5 0
2 7 10 Implements 5 1
2 7 11 Front-end loader 5 3
2 8 Specific safety instructions for servicing the tractor 54
2 8 1 Pollution warning to observe when servicing the tractor 5 4
2 8 2 General instructions 5 4
2 8 3 Handling instructions 5 5
2 8 4 Special instructions for cleaning the tractor 5 7
2 9 Protective structures 58
2 9 1 Protective structures – Use and accreditation 5 8
2 9 2 Cab 5 8
MF 6700 S – Operation
ACT0039950
Table of contents
2 9 3 Seat belt 5 8
2 9 4 Instructor seat 5 9
2 10 Warranty 60
2 10 1 General 60
2 10 2 Pre-delivery inspection and commissioning on the user’s premises 60
2 10 3 Warranty procedure 60
2 10 4 Procedure to follow if changing region 60
2 10 5 Servicing during and after the warranty period 61
2 10 6 California emission control warranty statement 61
2 10 7 United States and Canada emission control warranty statement 64
3 Operation 69
3 1 Operator environment 73
3 1 1 S teering console 7 3
3 1 2 Instrument panel 7 4
3 1 3 Control unit 8 1
3 1 4 Pedals 8 1
3 1 5 Steering wheel 8 2
3 1 6 O perator presence detector 8 2
3 1 7 Automatic adjustment pneumatic seat 8 6
3 1 8 Instructor seat 9 2
3 1 9 Right-hand console 9 3
3 1 10 Command Control Armrest 9 3
3 1 11 Right-hand pillar 9 6
3 1 12 Left-hand console 9 7
3 1 13 Upper console 9 8
3 1 14 Manual air conditioning 10 0
3 1 15 Automatic air conditioning 10 5
3 1 16 Additional heater 111
3 1 17 Accessories sockets 112
3 1 18 Emergency exits 114
3 1 19 Sun visor 115
3 1 20 Roof hatch 115
3 1 2 1 Wheel chock(s) (optional) 116
3 2 Setup and Information Screen control screens on the instrument
panel 118
3 2 1 Using the Setup and Information Screen 118
3 2 2 Screens Setup and Information Screen 119
3 3 Body 129
3 3 1 Opening the bonnet 12 9
3 3 2 Adjusting the external rear-view mirrors 12 9
3 3 2 1 Positioning the arms 12 9
3 3 2 2 Rear-view mirror with manual adjustment 12 9
3 3 2 3 Adjusting the arm extensions (depending on model) 13 0
3 3 2 4 Rear-view mirror with electric adjustment 13 0
3 3 3 Adjusting the double-angle rear-view mirror 13 1
3 3 3 1 Positioning and extending the arms 13 1
3 3 3 2 Rear-view mirror with manual adjustment 13 2
3 3 3 3 Rear-view mirror with electric adjustment 13 2
3 4 Engine 134
3 4 1 Running-in 13 4
3 4 2 Filling with fuel 13 4
3 4 3 Start switch 13 6
3 4 4 Start-up 13 6
3 4 5 Starting the SCR Technology engine in cold weather 13 7
3 4 6 Information on the different operating modes of the SCR Technology 13 9
3 4 7 Stopping the engine 14 4
3 4 8 Engine speed 14 4
3 4 9 Storing engine speeds 14 6
Transmission 148
3 5 1 Presentation of the different driving modes 14 8
3 5 2 Clutch function 14 8
3 5 3 PowerShuttle 14 9
3 5 3 1 PowerShuttle Protection Function 15 1
3 5 4 Adjusting the start ratios (1A , 1B , 1C etc ) 15 2
3 5 4 1 Starting ratio 15 2
3 5 5 Storing the transmission ratios (1A , 1B , 1C , etc ) 15 3
3 5 6 Lever (Speedmatching) mode 15 5
3 5 7 Pedal (AutoDrive) mode 15 7
3 5 8 Road mode (Hare)/Field mode (Tortoise) 15 9
3 5 9 Changing the transmission ratios (1A , 1B , 1C etc ) 161
3 5 10 Optional super creeper range (snail) 161
3 5 11 Tractor towing 162
3 5 12 Forward speed calibration 163
Brakes 164
3 6 1 Brake pedals 164
3 6 2 Instructions and Legislation for the Towing of Implements 164
3 6 3 Hydraulic trailer brake 165
3 6 4 Pneumatic trailer brake 166
3 6 5 Park brake 167
Steering 169
3 7 1 Steering 169
Front axle 172
3 8 1 Four-wheel drive front axle 17 2
3 8 2 Suspended front axle 17 3
3 8 3 Permissible load on the front axle 17 5
Differential lock 178
3 9 1 Differential lock 17 8
3 10 Power take-off 180
3 10 1 Front power take-off 180
3 10 2 Rear power take-off (PTO) 180
3 10 2 1 Selecting the power take-off speed 18 1
3 10 2 2 Adjusting the progressivity of power-take-off engagement 18 2
3 10 2 3 Engaging PTO in manual mode: 18 2
3 10 2 4 Engaging PTO in automatic mode: 18 2
3 10 3 Economy PTO 18 4
3 10 4 GS PTO (optional) 18 5
3 10 5 Changing the flanged shaft 18 6
3 10 6 PTO external control 18 6
3 10 7 Power take-off electronic controls 18 7
3 10 8 Power take-off protection 18 7
3 11 Linkage 189
3 11 1 General 18 9
3 11 2 Rear linkage electronic controls 19 0
3 11 3 Rear linkage operation 19 2
3 11 4 Rear linkage external controls 19 7
3 11 5 Front linkage 19 7
3 11 6 Top link 20 3
3 11 7 Bottom links 20 5
3 11 8 Lift rods 20 6
3 11 9 Stabilizers 20 8
3 11 9 1 Stabilizers with manual telescopic adjustment 20 8
3 11 9 2 Automatic stabilizers 20 9
3 11 9 3 Stabilizers with shoes 2 10
MF 6700 S – Operation
ACT0039950
Table of contents
3 11 10 Ball joint support 2 11
3 12 Towing equipment 2 12
3 12 1 General 2 12
3 12 2 Swinging drawbar 2 16
3 12 2 1 Fitting the swinging drawbar 2 18
3 13 Auxiliary hydraulics 2 19
3 13 1 General 2 19
3 13 2 Description of hydraulic couplers on Closed Center system (Load Sensing) 2 19
3 13 3 Use of hydraulic couplers on Closed Center system (Load Sensing) 2 2 1
3 13 4 Auxiliary hydraulics locking/unlocking 2 2 6
3 13 5 Hydraulics control lever 2 2 7
3 13 6 Description and use of the cab controls 2 2 8
3 13 7 Description and use of the external controls 2 3 5
3 13 8 Setting flow rates and time delay 2 3 5
3 13 9 Emergency manual spool valve control 2 3 7
3 14 Standard front-end loader function 238
3 14 1 Front-end loader 2 3 8
3 14 2 Layout of components 2 3 9
3 14 3 Standard front-end loader connection 2 3 9
3 14 4 Using the electric joystick of the standard front-end loader 2 4 0
3 14 4 1 Joystick functions for the standard front-end loader 2 4 1
3 14 4 2 Floating position with the standard front-end loader 2 4 1
3 14 4 3 Displaying the flow rates of the standard front-end loader 2 4 2
3 14 4 4 Arm suspension on the standard front-end loader 2 4 3
3 14 4 5 Locking and unlocking standard front-end loader accessories 2 4 4
3 14 4 6 Standard front-end loader/engine speed automation 2 4 4
3 14 4 7 3rd and 4th functions of the standard front-end loader 2 4 5
3 14 4 8 Automatic shaking function of the standard front-end loader implement 2 4 5
3 15 Front-end loader function with 3rd function option 246
3 15 1 Front-end loader 2 4 6
3 15 2 Layout of components 2 4 7
3 15 3 Front-end loader connection with 3rd function option 2 4 7
3 15 4 Using the front-end loader electric joystick with the 3rd function option 2 4 8
3 15 4 1 Joystick functions for the front-end loader with the 3rd function option 2 4 9
3 15 4 2 Floating position of the front-end loader with the 3rd function option 2 4 9
3 15 4 3 Displaying the front-end loader flow rates with the 3rd function option 2 5 0
3 15 4 4 Arm suspension on the front-end loader with the 3rd function option 2 5 2
3 15 4 5 Locking and unlocking front-end loader accessories with the 3rd function
option 2 5 2
3 15 4 6 Front-end loader/engine speed automation with the 3rd function option 2 5 3
3 15 4 7 Automatic shaking function for the front-end loader implement with the
3rd function option 2 5 3
3 15 4 8 Unhitching the front-end loader with the 3rd function option 2 5 3
3 16 Lighting 255
3 16 1 Main lighting control module 2 5 5
3 16 2 Work lights module 2 5 6
3 16 3 Direction indicators 2 5 7
3 17 Suspended cab 26 1
3 17 1 Suspended cab 2 61
3 18 Front tires and track widths 264
3 18 1 Wheel studs 2 6 4
3 18 2 Installation points of the axle stands 2 6 4
3 18 3 Adjusting the front wheel track width 2 6 5
3 18 4 Adjusting the 4WD front axle stops 2 6 8
3 18 4 1 Fitting the oscillation stops 2 6 8
3 18 4 2 Adjusting the steering angle 2 6 8
3 18 4 3 Toe-in check 2 69
MF 6700 S – Operation
ACT0039950
Table of contents
3 18 4 4 Adjusting the front fenders Shoe side adjustment on the front axle 2 69
3 18 4 5 Adjusting the front fenders Adjusting the height of the support on the
shoe 2 69
3 18 4 6 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments are possible) 2 70
3 18 5 Tires 2 70
3 18 6 Tire pressures 2 70
3 19 Rear tires and track widths 27 1
3 19 1 Wheel studs 2 7 1
3 19 2 Installation points of the axle stands 2 7 1
3 19 3 Rear track width with flanged shafts 2 7 2
3 19 4 Rear track width with short straight shafts 2 7 4
3 19 5 Rear track width with long straight shafts 2 7 8
3 19 6 Adjusting the rear wheel track width 2 80
3 19 6 1 Adjustment of wheel position on the straight shaft 2 8 1
3 19 6 2 Adjustment of wheel position on the straight shaft 2 8 1
3 20 Dual wheels 283
3 20 1 Dual wheels 2 8 3
3 20 2 Installation points of the axle stands 2 8 4
3 20 3 Dual rear wheel track width with long straight shafts 2 8 5
3 21 Ballast 29 1
3 2 1 1 Liquid ballasting 2 9 1
3 2 1 2 Front-end weight 2 9 1
4 Accessories 295
4 1 Cab 297
4 1 1 Cab accessories 2 9 7
4 2 Engine 298
4 2 1 Engine accessories 2 9 8
4 3 Power take-off 299
4 3 1 Power take-off accessories 2 9 9
4 4 Linkage 300
4 4 1 Linkage accessories 3 0 0
4 5 Auxiliary hydraulics 30 1
4 5 1 Auxiliary hydraulics accessories 3 0 1
4 6 Wheels and tires 302
4 6 1 Wheels and tires accessories 3 0 2

MASSEY FERGUSON EU TRACTOR MF6700 S SERIES 6713S 6714S 6715S 6716S 6718S DYNA-6 OPERATOR’S MANUAL:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V